RE: [RESEND] [PATCH] [SCSI] libsas: Allow expander T-T attachments
From: Mark Salyzyn
Date: Thu Sep 22 2011 - 12:56:27 EST
Except for the fact the patch as located in the attachment is still not in compliance, the patch works for me.
Sincerely -- Mark Salyzyn
> scsi-misc-2.6/scripts/checkpatch.pl 0001-SCSI-libsas-Allow-expander-T-T-attachments.patch
WARNING: line over 80 characters
#57: FILE: drivers/scsi/libsas/sas_expander.c:1245:
+ if (child_phy->routing_attr == SUBTRACTIVE_ROUTING ||
WARNING: line over 80 characters
#59: FILE: drivers/scsi/libsas/sas_expander.c:1247:
+ child_ex->t2t_supp && parent_ex->t2t_supp)) {
WARNING: line over 80 characters
#62: FILE: drivers/scsi/libsas/sas_expander.c:1250:
+ sas_print_parent_topology_bug(child, parent_phy, child_phy);
total: 0 errors, 3 warnings, 82 lines checked
0001-SCSI-libsas-Allow-expander-T-T-attachments.patch has style problems, please
review.
If any of these errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
-----Original Message-----
From: linux-scsi-owner@xxxxxxxxxxxxxxx [mailto:linux-scsi-owner@xxxxxxxxxxxxxxx] On Behalf Of Luben Tuikov
Sent: Thursday, September 22, 2011 12:42 PM
To: James Bottomley
Cc: linux-scsi@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
Subject: [RESEND] [PATCH] [SCSI] libsas: Allow expander T-T attachments
Allow expander table-to-table attachments for
expanders that support it.
Signed-off-by: Luben Tuikov <ltuikov@xxxxxxxxx>
---
drivers/scsi/libsas/sas_expander.c | 20 ++++++++++++++------
include/scsi/libsas.h | 3 +++
include/scsi/sas.h | 14 ++++++++++++--
3 files changed, 29 insertions(+), 8 deletions(-)
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index f84084b..e8d0115 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -329,6 +329,7 @@ static void ex_assign_report_general(struct domain_device *dev,
dev->ex_dev.ex_change_count = be16_to_cpu(rg->change_count);
dev->ex_dev.max_route_indexes = be16_to_cpu(rg->route_indexes);
dev->ex_dev.num_phys = min(rg->num_phys, (u8)MAX_EXPANDER_PHYS);
+ dev->ex_dev.t2t_supp = rg->t2t_supp;
dev->ex_dev.conf_route_table = rg->conf_route_table;
dev->ex_dev.configuring = rg->configuring;
memcpy(dev->ex_dev.enclosure_logical_id, rg->enclosure_logical_id, 8);
@@ -1133,15 +1134,17 @@ static void sas_print_parent_topology_bug(struct domain_device *child,
};
struct domain_device *parent = child->parent;
- sas_printk("%s ex %016llx phy 0x%x <--> %s ex %016llx phy 0x%x "
- "has %c:%c routing link!\n",
+ sas_printk("%s ex %016llx (T2T supp:%d) phy 0x%x <--> %s ex %016llx "
+ "(T2T supp:%d) phy 0x%x has %c:%c routing link!\n",
ex_type[parent->dev_type],
SAS_ADDR(parent->sas_addr),
+ parent->ex_dev.t2t_supp,
parent_phy->phy_id,
ex_type[child->dev_type],
SAS_ADDR(child->sas_addr),
+ child->ex_dev.t2t_supp,
child_phy->phy_id,
ra_char[parent_phy->routing_attr],
@@ -1238,10 +1241,15 @@ static int sas_check_parent_topology(struct domain_device *child)
sas_print_parent_topology_bug(child, parent_phy, child_phy);
res = -ENODEV;
}
- } else if (parent_phy->routing_attr == TABLE_ROUTING &&
- child_phy->routing_attr != SUBTRACTIVE_ROUTING) {
- sas_print_parent_topology_bug(child, parent_phy, child_phy);
- res = -ENODEV;
+ } else if (parent_phy->routing_attr == TABLE_ROUTING) {
+ if (child_phy->routing_attr == SUBTRACTIVE_ROUTING ||
+ (child_phy->routing_attr == TABLE_ROUTING &&
+ child_ex->t2t_supp && parent_ex->t2t_supp)) {
+ /* All good */;
+ } else {
+ sas_print_parent_topology_bug(child, parent_phy, child_phy);
+ res = -ENODEV;
+ }
}
break;
case FANOUT_DEV:
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index ee86606..793f80b 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -142,8 +142,11 @@ struct expander_device {
u16 ex_change_count;
u16 max_route_indexes;
u8 num_phys;
+
+ u8 t2t_supp:1;
u8 configuring:1;
u8 conf_route_table:1;
+
u8 enclosure_logical_id[8];
struct ex_phy *ex_phy;
diff --git a/include/scsi/sas.h b/include/scsi/sas.h
index e9fd022..f59f182 100644
--- a/include/scsi/sas.h
+++ b/include/scsi/sas.h
@@ -341,7 +341,12 @@ struct report_general_resp {
u8 conf_route_table:1;
u8 configuring:1;
- u8 _r_b:6;
+ u8 config_others:1;
+ u8 orej_retry_supp:1;
+ u8 stp_cont_awt:1;
+ u8 self_config:1;
+ u8 zone_config:1;
+ u8 t2t_supp:1;
u8 _r_c;
@@ -528,7 +533,12 @@ struct report_general_resp {
u8 _r_a;
u8 num_phys;
- u8 _r_b:6;
+ u8 t2t_supp:1;
+ u8 zone_config:1;
+ u8 self_config:1;
+ u8 stp_cont_awt:1;
+ u8 orej_retry_supp:1;
+ u8 config_others:1;
u8 configuring:1;
u8 conf_route_table:1;
--
1.7.2.2.165.gbc382
______________________________________________________________________
This email may contain privileged or confidential information, which should only be used for the purpose for which it was sent by Xyratex. No further rights or licenses are granted to use such information. If you are not the intended recipient of this message, please notify the sender by return and delete it. You may not use, copy, disclose or rely on the information contained in it.
Internet email is susceptible to data corruption, interception and unauthorised amendment for which Xyratex does not accept liability. While we have taken reasonable precautions to ensure that this email is free of viruses, Xyratex does not accept liability for the presence of any computer viruses in this email, nor for any losses caused as a result of viruses.
Xyratex Technology Limited (03134912), Registered in England & Wales, Registered Office, Langstone Road, Havant, Hampshire, PO9 1SA.
The Xyratex group of companies also includes, Xyratex Ltd, registered in Bermuda, Xyratex International Inc, registered in California, Xyratex (Malaysia) Sdn Bhd registered in Malaysia, Xyratex Technology (Wuxi) Co Ltd registered in The People's Republic of China and Xyratex Japan Limited registered in Japan.
______________________________________________________________________
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/