[PATCH v4] power: bq20z75: devicetree init support

From: Rhyland Klein
Date: Wed Sep 14 2011 - 14:05:35 EST


Adding support to generate platform data when kernel is configured
through device tree.

Also adding the binding for the TI bq20z75 fuel gadge and the
bq20z75 driver.

Signed-off-by: Rhyland Klein <rklein@xxxxxxxxxx>
---
v2: Fixed typo in binding description
v3: Changed to use "ti," for properties
Changed to use single gpio entry for battery detect info.
Removed unnecessary call to of_match_device.
v4: squashed bindings and drivers changes together.
fixed case where CONFIG_OF is not selected, to return existing
pdata pointer if it exists.

.../bindings/power_supply/ti_bq20z75.txt | 23 ++++++
drivers/power/bq20z75.c | 75 ++++++++++++++++++++
2 files changed, 98 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt

diff --git a/Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt b/Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt
new file mode 100644
index 0000000..7571294
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt
@@ -0,0 +1,23 @@
+TI bq20z75
+~~~~~~~~~~
+
+Required properties :
+ - compatible : "ti,bq20z75"
+
+Optional properties :
+ - ti,i2c-retry-count : The number of times to retry i2c transactions on i2c
+ IO failure.
+ - ti,poll-retry-count : The number of times to try looking for new status
+ after an external change notification.
+ - ti,battery-detect-gpios : The gpio which signals battery detection and
+ a flag specifying its polarity.
+
+Example:
+
+ bq20z75@b {
+ compatible = "ti,bq20z75";
+ reg = < 0xb >;
+ ti,i2c-retry-count = <2>;
+ ti,poll-retry-count = <10>;
+ ti,battery-detect-gpios = <&gpio-controller 122 1>;
+ }
diff --git a/drivers/power/bq20z75.c b/drivers/power/bq20z75.c
index 9c5e5be..4c4669e 100644
--- a/drivers/power/bq20z75.c
+++ b/drivers/power/bq20z75.c
@@ -613,6 +613,78 @@ static void bq20z75_delayed_work(struct work_struct *work)
}
}

+#if defined(CONFIG_OF)
+#include <linux/of_device.h>
+static const struct of_device_id bq20z75_dt_ids[] = {
+ { .compatible = "ti,bq20z75" },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, bq20z75_dt_ids);
+
+static struct bq20z75_platform_data *bq20z75_of_populate_pdata(
+ struct i2c_client *client)
+{
+ const struct of_device_id *dtid;
+ struct device_node *of_node = client->dev.of_node;
+ struct bq20z75_platform_data *pdata = client->dev.platform_data;
+ enum of_gpio_flags gpio_flags;
+ int rc;
+ u32 prop;
+
+ /* verify this driver matches this device */
+ if (!of_node)
+ return NULL;
+
+ /* if platform data is set, honor it */
+ if (pdata)
+ return pdata;
+
+ /* first make sure at least one property is set, otherwise
+ * it won't change behavior from running without pdata.
+ */
+ if (!of_get_property(of_node, "ti,i2c-retry-count", NULL) &&
+ !of_get_property(of_node, "ti,poll-retry-count", NULL) &&
+ !of_get_property(of_node, "ti,battery-detect-gpios", NULL))
+ goto of_out;
+
+ pdata = devm_kzalloc(&client->dev, sizeof(struct bq20z75_platform_data),
+ GFP_KERNEL);
+ if (!pdata)
+ goto of_out;
+
+ rc = of_property_read_u32(of_node, "ti,i2c-retry-count", &prop);
+ if (!rc)
+ pdata->i2c_retry_count = prop;
+
+ rc = of_property_read_u32(of_node, "ti,poll-retry-count", &prop);
+ if (!rc)
+ pdata->poll_retry_count = prop;
+
+ if (!of_get_property(of_node, "ti,battery-detect-gpios", NULL)) {
+ pdata->battery_detect = -1;
+ goto of_out;
+ }
+
+ pdata->battery_detect = of_get_named_gpio_flags(of_node,
+ "ti,battery-detect-gpios", 0, &gpio_flags);
+
+ if (gpio_flags & OF_GPIO_ACTIVE_LOW)
+ pdata->battery_detect_present = 0;
+ else
+ pdata->battery_detect_present = 1;
+
+of_out:
+ return pdata;
+}
+#else
+#define bq20z75_dt_ids NULL
+static struct bq20z75_platform_data *bq20z75_of_populate_pdata(
+ struct i2c_client *client)
+{
+ return client->dev.platform_data;
+}
+#endif
+
static int __devinit bq20z75_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -642,6 +714,8 @@ static int __devinit bq20z75_probe(struct i2c_client *client,
bq20z75_device->power_supply.external_power_changed =
bq20z75_external_power_changed;

+ pdata = bq20z75_of_populate_pdata(client);
+
if (pdata) {
bq20z75_device->gpio_detect =
gpio_is_valid(pdata->battery_detect);
@@ -775,6 +849,7 @@ static struct i2c_driver bq20z75_battery_driver = {
.id_table = bq20z75_id,
.driver = {
.name = "bq20z75-battery",
+ .of_match_table = bq20z75_dt_ids,
},
};

--
1.7.6

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/