Larry,
On Fri, Jul 29, 2011 at 11:14:20PM -0500, Larry Finger wrote:With kernel 3.0, my external hard drive attached to a PCMCIA card reports
"irq 11: nobody cared (try booting with the "irqpoll" option)". The
driver in question is ide-cs. When I try irqpoll, the device works
correctly. Naturally, the interrupt is shared with yenta, the PCMCIA
adapter driver. In addition, that same interrupt is used by a BCM4318
Cardbus device.
I plan on preparing a Bugzilla entry for this problem, but I'm not quite
ready. What I would like to know if there is any documentation on what
kinds of changes are needed to fix the problem.
Let me guess: it worked fine in 2.6.39, or .38? Output of "lspci -vv",
"dmesg" for a working and a non-working kernel would be good starting points
for trying to debug this issue.