Re: [PATCH] [9/50] mmc: Added quirks for Ricoh 1180:e823 lower base clock

From: matsumur
Date: Thu Jul 28 2011 - 20:43:49 EST


Dear Sir,

Ricoh 1180:e823 device is named R5U220/R5U232 (2 devices have the same
device ID ).
So, I think it should be declared to as PCI_DEVICE_ID_RICOH_R5U220.

BTW, does anyone know whether the current SDHCI-driver sets 200Mhz to
SD-CLK for UHS-I cards ?


Thanks,

Koji Matsumuro
Ricoh Company,Ltd.





Andi Kleen
<andi@firstfloor.
org> 宛先
manoj.iyer@xxxxxxxxxxxxx,
2011/07/29 08:44 daniel.manrique@xxxxxxxxxxxxx,
Koji Matsumuro/R/RICOH@RICOH,
jbarnes@xxxxxxxxxxxxxxxx,
cjb@xxxxxxxxxx,
ak@xxxxxxxxxxxxxxx,
linux-kernel@xxxxxxxxxxxxxxx,
stable@xxxxxxxxxx,
tim.bird@xxxxxxxxxxx
cc

件名
[PATCH] [9/50] mmc: Added quirks
for Ricoh 1180:e823 lower base
clock









2.6.35-longterm review patch. If anyone has any objections, please let me
know.

------------------
From: Manoj Iyer <manoj.iyer@xxxxxxxxxxxxx>

[ upstream commit 15bed0f2fa8e1d7db201692532c210a7823d2d21 ]
frequency

Ricoh 1180:e823 does not recognize certain types of SD/MMC cards,
as reported at http://launchpad.net/bugs/773524. Lowering the SD
base clock frequency from 200Mhz to 50Mhz fixes this issue. This
solution was suggest by Koji Matsumuro, Ricoh Company, Ltd.

This change has no negative performance effect on standard SD
cards, though it's quite possible that there will be one on
UHS-1 cards.

Signed-off-by: Manoj Iyer <manoj.iyer@xxxxxxxxxxxxx>
Tested-by: Daniel Manrique <daniel.manrique@xxxxxxxxxxxxx>
Cc: Koji Matsumuro <matsumur@xxxxxxxxxxxxxxx>
Cc: <stable@xxxxxxxxxx>
Acked-by: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
Signed-off-by: Chris Ball <cjb@xxxxxxxxxx>
Signed-off-by: Andi Kleen <ak@xxxxxxxxxxxxxxx>

Index: linux-2.6.35.y/drivers/pci/quirks.c
===================================================================
--- linux-2.6.35.y.orig/drivers/pci/quirks.c
+++ linux-2.6.35.y/drivers/pci/quirks.c
@@ -2698,6 +2698,29 @@ static void ricoh_mmc_fixup_r5c832(struc

dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via
firewire function)\n");
dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI
controller\n");
+
+ /*
+ * RICOH 0xe823 SD/MMC card reader fails to recognize
+ * certain types of SD/MMC cards. Lowering the SD base
+ * clock frequency from 200Mhz to 50Mhz fixes this issue.
+ *
+ * 0x150 - SD2.0 mode enable for changing base clock
+ * frequency to 50Mhz
+ * 0xe1 - Base clock frequency
+ * 0x32 - 50Mhz new clock frequency
+ * 0xf9 - Key register for 0x150
+ * 0xfc - key register for 0xe1
+ */
+ if (dev->device == PCI_DEVICE_ID_RICOH_R5CE823) {
+ pci_write_config_byte(dev, 0xf9, 0xfc);
+ pci_write_config_byte(dev, 0x150, 0x10);
+ pci_write_config_byte(dev, 0xf9, 0x00);
+ pci_write_config_byte(dev, 0xfc, 0x01);
+ pci_write_config_byte(dev, 0xe1, 0x32);
+ pci_write_config_byte(dev, 0xfc, 0x00);
+
+ dev_notice(&dev->dev, "MMC controller base frequency changed to
50Mhz.\n");
+ }
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832,
ricoh_mmc_fixup_r5c832);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH,
PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/