How to access serial port that is set in BIOS as OS Controlled

[Jeff Chua]

I'm trying to access the serial port ttyS2 that is set in the BIOS as
"OS Controlled" without much success. If it's set it to "Always
Enabled",  I can access the serial port.

This is on the Intermec CV60, and ttyS2 is the touchscreen port.

# setserial /dev/ttyS2
/dev/ttyS2, UART: 16550A, Port: 0x03e8, IRQ: 6


If I set the BIOS to "OS Controlled", I can't access the serial port
no matter what parameter I pass to the setserial. The factory default
is "OS Controlled", and Window XP can detect and access the port.
There will be hundreds of CV60 to get into the BIOS to set it one by
one. If there's a way to access the port in linux, it'll be great!

Thanks,
Jeff
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/