[PATCH 2/5] gpio: add support for TS-5500 GPIO
From: Vivien Didelot
Date: Tue Jul 19 2011 - 16:03:45 EST
From: Jerome Oufella <jerome.oufella@xxxxxxxxxxxxxxxxxxxx>
add support for TS-5500 GPIO in /arch/x86/platform/ts5500
Signed-off-by: Vivien Didelot <vivien.didelot@xxxxxxxxxxxxxxxxxxxx>
---
MAINTAINERS | 2 +
arch/x86/platform/ts5500/Kconfig | 7 +
arch/x86/platform/ts5500/Makefile | 1 +
arch/x86/platform/ts5500/ts5500.c | 21 ++
arch/x86/platform/ts5500/ts5500_gpio.c | 421 ++++++++++++++++++++++++++++++++
arch/x86/platform/ts5500/ts5500_gpio.h | 60 +++++
6 files changed, 512 insertions(+), 0 deletions(-)
create mode 100644 arch/x86/platform/ts5500/ts5500_gpio.c
create mode 100644 arch/x86/platform/ts5500/ts5500_gpio.h
diff --git a/MAINTAINERS b/MAINTAINERS
index be8ce4b..c6cf870 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6140,6 +6140,8 @@ S: Maintained
F: arch/x86/platform/ts5500/Kconfig
F: arch/x86/platform/ts5500/Makefile
F: arch/x86/platform/ts5500/ts5500.c
+F: arch/x86/platform/ts5500/ts5500_gpio.c
+F: arch/x86/platform/ts5500/ts5500_gpio.h
TEGRA SUPPORT
M: Colin Cross <ccross@xxxxxxxxxxx>
diff --git a/arch/x86/platform/ts5500/Kconfig b/arch/x86/platform/ts5500/Kconfig
index 6428ca5..bb4ef81 100644
--- a/arch/x86/platform/ts5500/Kconfig
+++ b/arch/x86/platform/ts5500/Kconfig
@@ -5,3 +5,10 @@ config TS5500
Add support for the Technologic Systems TS-5500 platform features.
If you have a TS-5500, say Y here.
+
+config TS5500_GPIO
+ bool "TS-5500 GPIO support"
+ depends on TS5500
+ default y
+ help
+ This enables support for the DIO headers for GPIO usage.
diff --git a/arch/x86/platform/ts5500/Makefile b/arch/x86/platform/ts5500/Makefile
index 0a689a7..9eb93fe 100644
--- a/arch/x86/platform/ts5500/Makefile
+++ b/arch/x86/platform/ts5500/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_TS5500) += ts5500.o
+obj-$(CONFIG_TS5500_GPIO) += ts5500_gpio.o
\ No newline at end of file
diff --git a/arch/x86/platform/ts5500/ts5500.c b/arch/x86/platform/ts5500/ts5500.c
index 0135dbd..1ed0097 100644
--- a/arch/x86/platform/ts5500/ts5500.c
+++ b/arch/x86/platform/ts5500/ts5500.c
@@ -24,6 +24,8 @@
#include <linux/io.h>
#include <linux/slab.h>
#include <asm/processor.h>
+#include <linux/gpio.h>
+#include "ts5500_gpio.h"
/* Hardware info for pre-detection */
#define AMD_ELAN_FAMILY 4
@@ -141,7 +143,26 @@ error:
#define TS5500_IS_JP_SET(sbc, jmp) (!!(sbc->jumpers & TS5500_JP##jmp))
+
+#ifdef CONFIG_TS5500_GPIO
+/* Callback for releasing resources */
+static void ts5500_gpio_device_release(struct device *dev)
+{
+ /* noop */
+}
+
+static struct platform_device ts5500_gpio_device = {
+ .name = "ts5500_gpio",
+ .id = -1,
+ .dev = {
+ .release = ts5500_gpio_device_release,
+ }
+};
+#endif
static struct platform_device *ts5500_devices[] __initdata = {
+#ifdef CONFIG_TS5500_GPIO
+ &ts5500_gpio_device,
+#endif
};
static ssize_t ts5500_show_id(struct device *dev,
diff --git a/arch/x86/platform/ts5500/ts5500_gpio.c b/arch/x86/platform/ts5500/ts5500_gpio.c
new file mode 100644
index 0000000..0250973
--- /dev/null
+++ b/arch/x86/platform/ts5500/ts5500_gpio.c
@@ -0,0 +1,421 @@
+/*
+ * GPIO (DIO) driver for Technologic Systems TS-5500
+ *
+ * Copyright (c) 2010 Savoir-faire Linux Inc.
+ * Jerome Oufella <jerome.oufella@xxxxxxxxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * TS-5500 board has 38 GPIOs referred to as DIOs in the product's literature.
+ */
+
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include "ts5500_gpio.h"
+
+static void port_bit_set(u8 addr, int bit)
+{
+ u8 var;
+ var = inb(addr);
+ var |= (1 << bit);
+ outb(var, addr);
+}
+
+static void port_bit_clear(u8 addr, int bit)
+{
+ u8 var;
+ var = inb(addr);
+ var &= ~(1 << bit);
+ outb(var, addr);
+}
+
+/* "DIO" line to IO port mapping table for line's value */
+static const unsigned long line_to_port_map[] = {
+ 0x7B, 0x7B, 0x7B, 0x7B, 0x7B, 0x7B, 0x7B, 0x7B, /* DIO1_0~7 */
+ 0x7C, 0x7C, 0x7C, 0x7C, 0x7C, 0x7C, /* DIO1_8~13 */
+ 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, /* DIO2_0~7 */
+ 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, /* DIO2_8~13 */
+ 0x72, 0x72, 0x72, 0x72, 0x72, 0x72, 0x72, 0x72, /* LCD_0~7 */
+ 0x73, 0x73, 0x73 /* LCD_EN, LCD_RS, LCD_WR */
+};
+
+/* "DIO" line to IO port's bit map for line's value */
+static const int line_to_bit_map[] = {
+ 0, 1, 2, 3, 4, 5, 6, 7, /* DIO1_0~7 */
+ 0, 1, 2, 3, 4, 5, /* DIO1_8~13 */
+ 0, 1, 2, 3, 4, 5, 6, 7, /* DIO2_0~7 */
+ 0, 1, 2, 3, 4, 5, /* DIO2_8~13 */
+ 0, 1, 2, 3, 4, 5, 6, 7, /* LCD_0~7 */
+ 0, 7, 6 /* LCD_EN, LCD_RS, LCD_WR */
+};
+
+/* "DIO" line's direction control mapping table */
+static const unsigned long line_to_dir_map[] = {
+ 0x7A, 0x7A, 0x7A, 0x7A, 0x7A, 0x7A, 0x7A, 0x7A, /* DIO1_0~7 */
+ 0x7A, 0x7A, 0x7A, 0x7A, 0, 0, /* DIO1_8~13 */
+ 0x7D, 0x7D, 0x7D, 0x7D, 0x7D, 0x7D, 0x7D, 0x7D, /* DIO2_0~7 */
+ 0x7D, 0x7D, 0x7D, 0x7D, 0, 0, /* DIO2_8~13 */
+ 0x7D, 0x7D, 0x7D, 0x7D, 0x7D, 0x7D, 0x7D, 0x7D, /* LCD_0~7 */
+ 0, 0, 0 /* LCD_EN, LCD_RS, LCD_WR */
+};
+
+/* "DIO" line's direction control bit-mapping table */
+static const int line_to_dir_bit_map[] = {
+ 0, 0, 0, 0, 1, 1, 1, 1, /* DIO1_0~7 */
+ 5, 5, 5, 5, -1, -1, /* DIO1_8~13 */
+ 0, 0, 0, 0, 1, 1, 1, 1, /* DIO2_0~7 */
+ 5, 5, 5, 5, -1, -1, /* DIO2_8~13 */
+ 2, 2, 2, 2, 3, 3, 3, 3, /* LCD_0~7 */
+ -1, -1, -1 /* LCD_EN, LCD_RS, LCD_WR */
+};
+
+/* This array is used to track requests for our GPIO lines */
+static int requested_gpios[TS5500_LCD_WR + 1];
+
+static int dio1_irq = 1;
+module_param(dio1_irq, int, 0644);
+MODULE_PARM_DESC(dio1_irq,
+ "Enable usage of IRQ7 for any DIO1 line (default 1).");
+
+static int dio2_irq = 0;
+module_param(dio2_irq, int, 0644);
+MODULE_PARM_DESC(dio2_irq,
+ "Enable usage of IRQ6 for any DIO2 line (default 0).");
+
+static int lcd_irq = 0;
+module_param(lcd_irq, int, 0644);
+MODULE_PARM_DESC(lcd_irq, "Enable usage of IRQ1 for any LCD line (default 0).");
+
+static int use_lcdio = 0;
+module_param(use_lcdio, int, 0644);
+MODULE_PARM_DESC(use_lcdio, "Enable usage of the LCD header for DIO operation"
+ " (default 0).");
+
+/**
+ * struct ts5500_drvdata - Driver data
+ * @master: Device.
+ * @gpio_chip: GPIO chip.
+ * @gpio_lock: Read/Write Mutex.
+ */
+struct ts5500_drvdata {
+ struct device *master;
+ struct gpio_chip gpio_chip;
+ struct mutex gpio_lock;
+};
+
+static int ts5500_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ struct ts5500_drvdata *drvdata;
+
+ drvdata = container_of(chip, struct ts5500_drvdata, gpio_chip);
+
+ mutex_lock(&drvdata->gpio_lock);
+ if (requested_gpios[offset]) {
+ mutex_unlock(&drvdata->gpio_lock);
+ return -EBUSY;
+ }
+ requested_gpios[offset] = 1;
+ mutex_unlock(&drvdata->gpio_lock);
+
+ return 0;
+}
+
+static void ts5500_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ struct ts5500_drvdata *drvdata;
+
+ drvdata = container_of(chip, struct ts5500_drvdata, gpio_chip);
+
+ mutex_lock(&drvdata->gpio_lock);
+ requested_gpios[offset] = 0;
+ mutex_unlock(&drvdata->gpio_lock);
+}
+
+static int ts5500_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ unsigned long ioaddr;
+ u8 byte;
+ int bitno;
+ struct ts5500_drvdata *drvdata;
+
+ drvdata = container_of(chip, struct ts5500_drvdata, gpio_chip);
+
+ /* Some lines are output-only and cannot be read */
+ switch (offset) {
+ case TS5500_LCD_EN:
+ return -ENXIO;
+ default:
+ if (offset > chip->ngpio)
+ return -ENXIO;
+ }
+
+ ioaddr = line_to_port_map[offset];
+ bitno = line_to_bit_map[offset];
+
+ mutex_lock(&drvdata->gpio_lock);
+ byte = inb(ioaddr);
+ mutex_unlock(&drvdata->gpio_lock);
+
+ return (byte >> bitno) & 0x1;
+}
+
+static void ts5500_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+ int bitno;
+ unsigned long ioaddr;
+ struct ts5500_drvdata *drvdata;
+
+ drvdata = container_of(chip, struct ts5500_drvdata, gpio_chip);
+
+ /* Some lines just can't be set */
+ switch (offset) {
+ case TS5500_DIO1_12:
+ case TS5500_DIO1_13:
+ case TS5500_DIO2_13:
+ case TS5500_LCD_RS:
+ case TS5500_LCD_WR:
+ return;
+ default:
+ if (offset > chip->ngpio)
+ return;
+ break;
+ }
+
+ /* Get io port and bit for 'offset' */
+ ioaddr = line_to_port_map[offset];
+ bitno = line_to_bit_map[offset];
+
+ mutex_lock(&drvdata->gpio_lock);
+ if (val == 0)
+ port_bit_clear(ioaddr, bitno);
+ else
+ port_bit_set(ioaddr, bitno);
+ mutex_unlock(&drvdata->gpio_lock);
+}
+
+static int ts5500_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ /* Only a few lines are IRQ-Capable */
+ switch (offset) {
+ case TS5500_DIO1_13:
+ return TS5500_DIO1_13_IRQ;
+ case TS5500_DIO2_13:
+ return TS5500_DIO2_13_IRQ;
+ case TS5500_LCD_RS:
+ return TS5500_LCD_RS_IRQ;
+ default:
+ break;
+ }
+
+ /*
+ * Handle the case where the user bridged the IRQ line with another
+ * DIO line from the same header.
+ */
+ if (dio1_irq && offset >= TS5500_DIO1_0 && offset < TS5500_DIO1_13)
+ return TS5500_DIO1_13_IRQ;
+
+ if (dio2_irq && offset >= TS5500_DIO2_0 && offset < TS5500_DIO2_13)
+ return TS5500_DIO2_13_IRQ;
+
+ if (lcd_irq && offset >= TS5500_LCD_0 && offset <= TS5500_LCD_WR)
+ return TS5500_LCD_RS_IRQ;
+
+ return -ENXIO;
+}
+
+static int ts5500_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ unsigned long dir_reg;
+ int dir_bit;
+ struct ts5500_drvdata *drvdata;
+
+ drvdata = container_of(chip, struct ts5500_drvdata, gpio_chip);
+
+ /* Some lines cannot be set as inputs */
+ switch (offset) {
+ case TS5500_LCD_EN:
+ return -ENXIO;
+ default:
+ if (offset > chip->ngpio)
+ return -ENXIO;
+ break;
+ }
+
+ dir_reg = line_to_dir_map[offset];
+ dir_bit = line_to_dir_bit_map[offset];
+
+ mutex_lock(&drvdata->gpio_lock);
+ port_bit_clear(dir_reg, dir_bit);
+ mutex_unlock(&drvdata->gpio_lock);
+
+ return 0;
+}
+
+static int ts5500_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int val)
+{
+ unsigned long dir_reg, ioaddr;
+ int dir_bit, bitno;
+ struct ts5500_drvdata *drvdata;
+
+ drvdata = container_of(chip, struct ts5500_drvdata, gpio_chip);
+
+ /* Some lines cannot be set as outputs */
+ switch (offset) {
+ case TS5500_DIO1_12:
+ case TS5500_DIO1_13:
+ case TS5500_DIO2_13:
+ case TS5500_LCD_RS:
+ case TS5500_LCD_WR:
+ return -ENXIO;
+ default:
+ if (offset > chip->ngpio)
+ return -ENXIO;
+ break;
+ }
+
+ /* Get direction and value registers infos */
+ dir_reg = line_to_dir_map[offset];
+ dir_bit = line_to_dir_bit_map[offset];
+ ioaddr = line_to_port_map[offset];
+ bitno = line_to_bit_map[offset];
+
+ mutex_lock(&drvdata->gpio_lock);
+ if (val == 0)
+ port_bit_clear(ioaddr, bitno); /* Set initial line value */
+ else
+ port_bit_set(ioaddr, bitno);
+ port_bit_set(dir_reg, dir_bit); /* Set output direction for line */
+
+ /*
+ * Confirm initial line output value
+ * (might have been changed by input)
+ */
+ if (val == 0)
+ port_bit_clear(ioaddr, bitno);
+ else
+ port_bit_set(ioaddr, bitno);
+ mutex_unlock(&drvdata->gpio_lock);
+
+ return 0;
+}
+
+static int __devinit ts5500_gpio_probe(struct platform_device *pdev)
+{
+ struct ts5500_drvdata *drvdata;
+ struct gpio_chip *chip;
+ int ret;
+
+ if (pdev == NULL) {
+ dev_err(&pdev->dev, "Platform device not available!\n");
+ return -ENODEV;
+ }
+
+ /* Request DIO1 */
+ if (!request_region(0x7A, 3, "ts5500-gpio-DIO1")) {
+ dev_err(&pdev->dev, "Cannot request I/O port 0x7A-7C\n");
+ goto err_req_dio1;
+ }
+
+ /* Request DIO2 */
+ if (!request_region(0x7D, 3, "ts5500-gpio-DIO2")) {
+ dev_err(&pdev->dev, "Cannot request I/O port 0x7D-7F\n");
+ goto err_req_dio2;
+ }
+
+ /* Request LCDIO if wanted */
+ if (use_lcdio && !request_region(0x72, 2, "ts5500-gpio-LCD")) {
+ dev_err(&pdev->dev, "Cannot request I/O port 0x72-73\n");
+ goto err_req_lcdio;
+ }
+
+ /* Setup the gpio_chip structure */
+ drvdata = kzalloc(sizeof(struct ts5500_drvdata), GFP_KERNEL);
+ if (drvdata == NULL)
+ goto err_alloc_dev;
+
+ memset(requested_gpios, 0, sizeof(requested_gpios));
+ mutex_init(&drvdata->gpio_lock);
+
+ drvdata->master = pdev->dev.parent;
+ chip = &drvdata->gpio_chip;
+ chip->request = ts5500_gpio_request;
+ chip->free = ts5500_gpio_free;
+ chip->to_irq = ts5500_gpio_to_irq;
+ chip->direction_input = ts5500_gpio_direction_input;
+ chip->direction_output = ts5500_gpio_direction_output;
+ chip->get = ts5500_gpio_get;
+ chip->set = ts5500_gpio_set;
+ chip->can_sleep = 0;
+ chip->base = TS5500_DIO1_0;
+ chip->label = pdev->name;
+ chip->ngpio = (use_lcdio ? TS5500_LCD_WR + 1 : TS5500_DIO2_13 + 1);
+
+ /* Enable IRQ generation */
+ mutex_lock(&drvdata->gpio_lock);
+ port_bit_set(0x7A, 7); /* DIO1_13 on IRQ7 */
+ port_bit_set(0x7D, 7); /* DIO2_13 on IRQ6 */
+ if (use_lcdio) {
+ port_bit_clear(0x7D, 4); /* Enable LCD header usage as DIO */
+ port_bit_set(0x7D, 6); /* LCD_RS on IRQ1 */
+ }
+ mutex_unlock(&drvdata->gpio_lock);
+
+ /* Register chip */
+ ret = gpiochip_add(&drvdata->gpio_chip);
+ if (ret)
+ goto err_gpiochip_add;
+
+ platform_set_drvdata(pdev, drvdata);
+
+ return 0;
+
+err_gpiochip_add:
+ dev_err(&pdev->dev, "Failed to register the gpio chip.\n");
+ kfree(drvdata);
+
+err_alloc_dev:
+ if (use_lcdio)
+ release_region(0x72, 2); /* Release LCD's region */
+
+err_req_lcdio:
+ release_region(0x7D, 3); /* Release DIO2's region */
+
+err_req_dio2:
+ release_region(0x7A, 3); /* Release DIO1's region */
+
+err_req_dio1:
+ ret = -EBUSY;
+
+ return ret;
+}
+
+static struct platform_driver ts5500_gpio_driver = {
+ .driver = {
+ .name = "ts5500_gpio",
+ .owner = THIS_MODULE,
+ },
+ .probe = ts5500_gpio_probe
+};
+
+static const struct platform_device_id ts5500_devices[] = {
+ { "ts5500_gpio", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(platform, ts5500_devices);
+
+static int __init ts5500_gpio_init(void)
+{
+ return platform_driver_register(&ts5500_gpio_driver);
+}
+module_init(ts5500_gpio_init);
+
+MODULE_AUTHOR("Jerome Oufella <jerome.oufella@xxxxxxxxxxxxxxxxxxxx>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Technologic Systems TS-5500, GPIO/DIO driver");
diff --git a/arch/x86/platform/ts5500/ts5500_gpio.h b/arch/x86/platform/ts5500/ts5500_gpio.h
new file mode 100644
index 0000000..7090263
--- /dev/null
+++ b/arch/x86/platform/ts5500/ts5500_gpio.h
@@ -0,0 +1,60 @@
+/*
+ * GPIO (DIO) driver for Technologic Systems TS-5500
+ *
+ * Copyright (c) 2010 Savoir-faire Linux Inc.
+ * Jerome Oufella <jerome.oufella@xxxxxxxxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _TS5500_GPIO_H
+#define _TS5500_GPIO_H
+
+#define TS5500_DIO1_0 0
+#define TS5500_DIO1_1 1
+#define TS5500_DIO1_2 2
+#define TS5500_DIO1_3 3
+#define TS5500_DIO1_4 4
+#define TS5500_DIO1_5 5
+#define TS5500_DIO1_6 6
+#define TS5500_DIO1_7 7
+#define TS5500_DIO1_8 8
+#define TS5500_DIO1_9 9
+#define TS5500_DIO1_10 10
+#define TS5500_DIO1_11 11
+#define TS5500_DIO1_12 12
+#define TS5500_DIO1_13 13
+#define TS5500_DIO2_0 14
+#define TS5500_DIO2_1 15
+#define TS5500_DIO2_2 16
+#define TS5500_DIO2_3 17
+#define TS5500_DIO2_4 18
+#define TS5500_DIO2_5 19
+#define TS5500_DIO2_6 20
+#define TS5500_DIO2_7 21
+#define TS5500_DIO2_8 22
+#define TS5500_DIO2_9 23
+#define TS5500_DIO2_10 24
+#define TS5500_DIO2_11 25
+/* #define TS5500_DIO2_12 - Keep commented out as it simply doesn't exist. */
+#define TS5500_DIO2_13 26
+#define TS5500_LCD_0 27
+#define TS5500_LCD_1 28
+#define TS5500_LCD_2 29
+#define TS5500_LCD_3 30
+#define TS5500_LCD_4 31
+#define TS5500_LCD_5 32
+#define TS5500_LCD_6 33
+#define TS5500_LCD_7 34
+#define TS5500_LCD_EN 35
+#define TS5500_LCD_RS 36
+#define TS5500_LCD_WR 37
+
+/* Lines that can trigger IRQs */
+#define TS5500_DIO1_13_IRQ 7
+#define TS5500_DIO2_13_IRQ 6
+#define TS5500_LCD_RS_IRQ 1
+
+#endif /* _TS5500_GPIO_H */
--
1.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/