[PATCH] gma500: Add medfield header
From: Alan Cox
Date: Fri Jul 15 2011 - 14:43:20 EST
From: Alan Cox <alan@xxxxxxxxxxxxxxx>
Signed-off-by: Alan Cox <alan@xxxxxxxxxxxxxxx>
---
drivers/staging/gma500/medfield.h | 270 +++++++++++++++++++++++++++++++++++++
1 files changed, 270 insertions(+), 0 deletions(-)
create mode 100644 drivers/staging/gma500/medfield.h
diff --git a/drivers/staging/gma500/medfield.h b/drivers/staging/gma500/medfield.h
new file mode 100644
index 0000000..38165e8
--- /dev/null
+++ b/drivers/staging/gma500/medfield.h
@@ -0,0 +1,270 @@
+/*
+ * Copyright  2011 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#define DRM_MODE_ENCODER_MIPI 5
+
+/* Medfield DSI controller registers */
+
+#define MIPIA_DEVICE_READY_REG 0xb000
+#define MIPIA_INTR_STAT_REG 0xb004
+#define MIPIA_INTR_EN_REG 0xb008
+#define MIPIA_DSI_FUNC_PRG_REG 0xb00c
+#define MIPIA_HS_TX_TIMEOUT_REG 0xb010
+#define MIPIA_LP_RX_TIMEOUT_REG 0xb014
+#define MIPIA_TURN_AROUND_TIMEOUT_REG 0xb018
+#define MIPIA_DEVICE_RESET_TIMER_REG 0xb01c
+#define MIPIA_DPI_RESOLUTION_REG 0xb020
+#define MIPIA_DBI_FIFO_THROTTLE_REG 0xb024
+#define MIPIA_HSYNC_COUNT_REG 0xb028
+#define MIPIA_HBP_COUNT_REG 0xb02c
+#define MIPIA_HFP_COUNT_REG 0xb030
+#define MIPIA_HACTIVE_COUNT_REG 0xb034
+#define MIPIA_VSYNC_COUNT_REG 0xb038
+#define MIPIA_VBP_COUNT_REG 0xb03c
+#define MIPIA_VFP_COUNT_REG 0xb040
+#define MIPIA_HIGH_LOW_SWITCH_COUNT_REG 0xb044
+#define MIPIA_DPI_CONTROL_REG 0xb048
+#define MIPIA_DPI_DATA_REG 0xb04c
+#define MIPIA_INIT_COUNT_REG 0xb050
+#define MIPIA_MAX_RETURN_PACK_SIZE_REG 0xb054
+#define MIPIA_VIDEO_MODE_FORMAT_REG 0xb058
+#define MIPIA_EOT_DISABLE_REG 0xb05c
+#define MIPIA_LP_BYTECLK_REG 0xb060
+#define MIPIA_LP_GEN_DATA_REG 0xb064
+#define MIPIA_HS_GEN_DATA_REG 0xb068
+#define MIPIA_LP_GEN_CTRL_REG 0xb06c
+#define MIPIA_HS_GEN_CTRL_REG 0xb070
+#define MIPIA_GEN_FIFO_STAT_REG 0xb074
+#define MIPIA_HS_LS_DBI_ENABLE_REG 0xb078
+#define MIPIA_DPHY_PARAM_REG 0xb080
+#define MIPIA_DBI_BW_CTRL_REG 0xb084
+#define MIPIA_CLK_LANE_SWITCH_TIME_CNT_REG 0xb088
+
+#define DSI_DEVICE_READY (0x1)
+#define DSI_POWER_STATE_ULPS_ENTER (0x2 << 1)
+#define DSI_POWER_STATE_ULPS_EXIT (0x1 << 1)
+#define DSI_POWER_STATE_ULPS_OFFSET (0x1)
+
+
+#define DSI_ONE_DATA_LANE (0x1)
+#define DSI_TWO_DATA_LANE (0x2)
+#define DSI_THREE_DATA_LANE (0X3)
+#define DSI_FOUR_DATA_LANE (0x4)
+#define DSI_DPI_VIRT_CHANNEL_OFFSET (0x3)
+#define DSI_DBI_VIRT_CHANNEL_OFFSET (0x5)
+#define DSI_DPI_COLOR_FORMAT_RGB565 (0x01 << 7)
+#define DSI_DPI_COLOR_FORMAT_RGB666 (0x02 << 7)
+#define DSI_DPI_COLOR_FORMAT_RGB666_UNPACK (0x03 << 7)
+#define DSI_DPI_COLOR_FORMAT_RGB888 (0x04 << 7)
+#define DSI_DBI_COLOR_FORMAT_OPTION2 (0x05 << 13)
+
+#define DSI_INTR_STATE_RXSOTERROR 1
+
+#define DSI_INTR_STATE_SPL_PKG_SENT (1 << 30)
+#define DSI_INTR_STATE_TE (1 << 31)
+
+#define DSI_HS_TX_TIMEOUT_MASK (0xffffff)
+
+#define DSI_LP_RX_TIMEOUT_MASK (0xffffff)
+
+#define DSI_TURN_AROUND_TIMEOUT_MASK (0x3f)
+
+#define DSI_RESET_TIMER_MASK (0xffff)
+
+#define DSI_DBI_FIFO_WM_HALF (0x0)
+#define DSI_DBI_FIFO_WM_QUARTER (0x1)
+#define DSI_DBI_FIFO_WM_LOW (0x2)
+
+#define DSI_DPI_TIMING_MASK (0xffff)
+
+#define DSI_INIT_TIMER_MASK (0xffff)
+
+#define DSI_DBI_RETURN_PACK_SIZE_MASK (0x3ff)
+
+#define DSI_LP_BYTECLK_MASK (0x0ffff)
+
+#define DSI_HS_CTRL_GEN_SHORT_W0 (0x03)
+#define DSI_HS_CTRL_GEN_SHORT_W1 (0x13)
+#define DSI_HS_CTRL_GEN_SHORT_W2 (0x23)
+#define DSI_HS_CTRL_GEN_R0 (0x04)
+#define DSI_HS_CTRL_GEN_R1 (0x14)
+#define DSI_HS_CTRL_GEN_R2 (0x24)
+#define DSI_HS_CTRL_GEN_LONG_W (0x29)
+#define DSI_HS_CTRL_MCS_SHORT_W0 (0x05)
+#define DSI_HS_CTRL_MCS_SHORT_W1 (0x15)
+#define DSI_HS_CTRL_MCS_R0 (0x06)
+#define DSI_HS_CTRL_MCS_LONG_W (0x39)
+#define DSI_HS_CTRL_VC_OFFSET (0x06)
+#define DSI_HS_CTRL_WC_OFFSET (0x08)
+
+#define DSI_FIFO_GEN_HS_DATA_FULL (1 << 0)
+#define DSI_FIFO_GEN_HS_DATA_HALF_EMPTY (1 << 1)
+#define DSI_FIFO_GEN_HS_DATA_EMPTY (1 << 2)
+#define DSI_FIFO_GEN_LP_DATA_FULL (1 << 8)
+#define DSI_FIFO_GEN_LP_DATA_HALF_EMPTY (1 << 9)
+#define DSI_FIFO_GEN_LP_DATA_EMPTY (1 << 10)
+#define DSI_FIFO_GEN_HS_CTRL_FULL (1 << 16)
+#define DSI_FIFO_GEN_HS_CTRL_HALF_EMPTY (1 << 17)
+#define DSI_FIFO_GEN_HS_CTRL_EMPTY (1 << 18)
+#define DSI_FIFO_GEN_LP_CTRL_FULL (1 << 24)
+#define DSI_FIFO_GEN_LP_CTRL_HALF_EMPTY (1 << 25)
+#define DSI_FIFO_GEN_LP_CTRL_EMPTY (1 << 26)
+#define DSI_FIFO_DBI_EMPTY (1 << 27)
+#define DSI_FIFO_DPI_EMPTY (1 << 28)
+
+#define DSI_DBI_HS_LP_SWITCH_MASK (0x1)
+
+#define DSI_HS_LP_SWITCH_COUNTER_OFFSET (0x0)
+#define DSI_LP_HS_SWITCH_COUNTER_OFFSET (0x16)
+
+#define DSI_DPI_CTRL_HS_SHUTDOWN (0x00000001)
+#define DSI_DPI_CTRL_HS_TURN_ON (0x00000002)
+
+/* Medfield DSI adapter registers */
+#define MIPIA_CONTROL_REG 0xb104
+#define MIPIA_DATA_ADD_REG 0xb108
+#define MIPIA_DATA_LEN_REG 0xb10c
+#define MIPIA_CMD_ADD_REG 0xb110
+#define MIPIA_CMD_LEN_REG 0xb114
+
+/*dsi power modes*/
+#define DSI_POWER_MODE_DISPLAY_ON (1 << 2)
+#define DSI_POWER_MODE_NORMAL_ON (1 << 3)
+#define DSI_POWER_MODE_SLEEP_OUT (1 << 4)
+#define DSI_POWER_MODE_PARTIAL_ON (1 << 5)
+#define DSI_POWER_MODE_IDLE_ON (1 << 6)
+
+enum {
+ MDFLD_DSI_ENCODER_DBI = 0,
+ MDFLD_DSI_ENCODER_DPI,
+};
+
+enum {
+ MDFLD_DSI_VIDEO_NON_BURST_MODE_SYNC_PULSE = 1,
+ MDFLD_DSI_VIDEO_NON_BURST_MODE_SYNC_EVENTS = 2,
+ MDFLD_DSI_VIDEO_BURST_MODE = 3,
+};
+
+#define DSI_DPI_COMPLETE_LAST_LINE (1 << 2)
+#define DSI_DPI_DISABLE_BTA (1 << 3)
+/* Panel types */
+enum {
+ TPO_CMD,
+ TPO_VID,
+ TMD_CMD,
+ TMD_VID,
+ PYR_CMD,
+ PYR_VID,
+ TPO,
+ TMD,
+ PYR,
+ HDMI,
+ GCT_DETECT
+};
+
+/* Junk that belongs elsewhere */
+#define TPO_PANEL_WIDTH 84
+#define TPO_PANEL_HEIGHT 46
+#define TMD_PANEL_WIDTH 39
+#define TMD_PANEL_HEIGHT 71
+#define PYR_PANEL_WIDTH 53
+#define PYR_PANEL_HEIGHT 95
+
+/* Panel interface */
+struct panel_info {
+ u32 width_mm;
+ u32 height_mm;
+};
+
+struct mdfld_dsi_dbi_output;
+
+struct mdfld_dsi_connector_state {
+ u32 mipi_ctrl_reg;
+};
+
+struct mdfld_dsi_encoder_state {
+
+};
+
+struct mdfld_dsi_connector {
+ /*
+ * This is ugly, but I have to use connector in it! :-(
+ * FIXME: use drm_connector instead.
+ */
+ struct psb_intel_output base;
+
+ int pipe;
+ void *private;
+ void *pkg_sender;
+
+ /* Connection status */
+ enum drm_connector_status status;
+};
+
+struct mdfld_dsi_encoder {
+ struct drm_encoder base;
+ void *private;
+};
+
+/*
+ * DSI config, consists of one DSI connector, two DSI encoders.
+ * DRM will pick up on DSI encoder basing on differents configs.
+ */
+struct mdfld_dsi_config {
+ struct drm_device *dev;
+ struct drm_display_mode *fixed_mode;
+ struct drm_display_mode *mode;
+
+ struct mdfld_dsi_connector *connector;
+ struct mdfld_dsi_encoder *encoders[DRM_CONNECTOR_MAX_ENCODER];
+ struct mdfld_dsi_encoder *encoder;
+
+ int changed;
+
+ int bpp;
+ int type;
+ int lane_count;
+ /*Virtual channel number for this encoder*/
+ int channel_num;
+ /*video mode configure*/
+ int video_mode;
+
+ int dvr_ic_inited;
+};
+
+#define MDFLD_DSI_CONNECTOR(psb_output) \
+ (container_of(psb_output, struct mdfld_dsi_connector, base))
+
+#define MDFLD_DSI_ENCODER(encoder) \
+ (container_of(encoder, struct mdfld_dsi_encoder, base))
+
+struct panel_funcs {
+ const struct drm_encoder_funcs *encoder_funcs;
+ const struct drm_encoder_helper_funcs *encoder_helper_funcs;
+ struct drm_display_mode *(*get_config_mode) (struct drm_device *);
+ void (*update_fb) (struct mdfld_dsi_dbi_output *, int);
+ int (*get_panel_info) (struct drm_device *, int, struct panel_info *);
+ int (*reset)(int pipe);
+ void (*drv_ic_init)(struct mdfld_dsi_config *dsi_config, int pipe);
+};
+
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/