[tip:x86/apic] x86, ioapic: Print IRTE when IR is enabled

From: tip-bot for Naga Chumbalkar
Date: Tue Jul 12 2011 - 23:07:47 EST


Commit-ID: 3040db92ee1b6c5b6b6d73f8cdcad54c0da11563
Gitweb: http://git.kernel.org/tip/3040db92ee1b6c5b6b6d73f8cdcad54c0da11563
Author: Naga Chumbalkar <nagananda.chumbalkar@xxxxxx>
AuthorDate: Tue, 12 Jul 2011 21:17:41 +0000
Committer: H. Peter Anvin <hpa@xxxxxxxxxxxxxxx>
CommitDate: Tue, 12 Jul 2011 14:34:00 -0700

x86, ioapic: Print IRTE when IR is enabled

When "apic=debug" is used as a boot parameter, Linux prints the IOAPIC routing
entries in "dmesg". Below is output from IOAPIC whose apic_id is 8:

# dmesg | grep "routing entry"
IOAPIC[8]: Set routing entry (8-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:0)
IOAPIC[8]: Set routing entry (8-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0)
IOAPIC[8]: Set routing entry (8-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:0)
...

Similarly, when IR (interrupt remapping) is enabled, and the IRTE
(interrupt remapping table entry) is set up we should display it.

After the fix:

# dmesg | grep IRTE
IOAPIC[8]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:31 Dest:00000000 SID:00F1 SQ:0 SVT:1)
IOAPIC[8]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:30 Dest:00000000 SID:00F1 SQ:0 SVT:1)
IOAPIC[8]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:33 Dest:00000000 SID:00F1 SQ:0 SVT:1)
...

The IRTE is defined in Sec 9.5 of the Intel VT-d Specification.

Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@xxxxxx>
Link: http://lkml.kernel.org/r/20110712211704.2939.71291.sendpatchset@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Signed-off-by: H. Peter Anvin <hpa@xxxxxxxxxxxxxxx>
---
arch/x86/kernel/apic/io_apic.c | 10 ++++++++++
1 files changed, 10 insertions(+), 0 deletions(-)

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 5cba200..1ed5cbb 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1295,6 +1295,16 @@ static int setup_ioapic_entry(int apic_id, int irq,
* irq handler will do the explicit EOI to the io-apic.
*/
ir_entry->vector = pin;
+
+ apic_printk(APIC_VERBOSE, KERN_DEBUG "IOAPIC[%d]: "
+ "Set IRTE entry (P:%d FPD:%d Dst_Mode:%d "
+ "Redir_hint:%d Trig_Mode:%d Dlvry_Mode:%X "
+ "Avail:%X Vector:%02X Dest:%08X "
+ "SID:%04X SQ:%X SVT:%X)\n",
+ apic_id, irte.present, irte.fpd, irte.dst_mode,
+ irte.redir_hint, irte.trigger_mode, irte.dlvry_mode,
+ irte.avail, irte.vector, irte.dest_id,
+ irte.sid, irte.sq, irte.svt);
} else {
entry->delivery_mode = apic->irq_delivery_mode;
entry->dest_mode = apic->irq_dest_mode;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/