[PATCH] dmaengine: pl330: make platform data optional

From: Rob Herring
Date: Tue Jul 12 2011 - 21:00:46 EST


From: Rob Herring <rob.herring@xxxxxxxxxxx>

The pl330 needs platform data for describing peripheral connections, but
some platforms may only support memory to memory dma channels. In this
case, we can probe for how many channels there are and don't need the
platform data.

As memcpy requests don't need channel private data to hold peripheral
info, allow private data to be NULL in this case.

Signed-off-by: Rob Herring <rob.herring@xxxxxxxxxxx>
Cc: Jassi Brar <jassi.brar@xxxxxxxxxxx>
Cc: Vinod Koul <vinod.koul@xxxxxxxxx>
Cc: Dan Williams <dan.j.williams@xxxxxxxxx>
---
drivers/dma/pl330.c | 64 ++++++++++++++++++++++++++++----------------------
1 files changed, 36 insertions(+), 28 deletions(-)

diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 7181e43..76fd403 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -82,7 +82,7 @@ struct dma_pl330_dmac {
spinlock_t pool_lock;

/* Peripheral channels connected to this DMAC */
- struct dma_pl330_chan peripherals[0]; /* keep at end */
+ struct dma_pl330_chan *peripherals; /* keep at end */
};

struct dma_pl330_desc {
@@ -451,8 +451,13 @@ static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
desc->txd.cookie = 0;
async_tx_ack(&desc->txd);

- desc->req.rqtype = peri->rqtype;
- desc->req.peri = peri->peri_id;
+ if (peri) {
+ desc->req.rqtype = peri->rqtype;
+ desc->req.peri = peri->peri_id;
+ } else {
+ desc->req.rqtype = MEMTOMEM;
+ desc->req.peri = 0;
+ }

dma_async_tx_descriptor_init(&desc->txd, &pch->chan);

@@ -529,10 +534,10 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
struct pl330_info *pi;
int burst;

- if (unlikely(!pch || !len || !peri))
+ if (unlikely(!pch || !len))
return NULL;

- if (peri->rqtype != MEMTOMEM)
+ if (peri && peri->rqtype != MEMTOMEM)
return NULL;

pi = &pch->dmac->pif;
@@ -577,7 +582,7 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
int i, burst_size;
dma_addr_t addr;

- if (unlikely(!pch || !sgl || !sg_len))
+ if (unlikely(!pch || !sgl || !sg_len || !peri))
return NULL;

/* Make sure the direction is consistent */
@@ -666,17 +671,12 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
struct dma_device *pd;
struct resource *res;
int i, ret, irq;
+ int num_chan;

pdat = adev->dev.platform_data;

- if (!pdat || !pdat->nr_valid_peri) {
- dev_err(&adev->dev, "platform data missing\n");
- return -ENODEV;
- }
-
/* Allocate a new DMAC and its Channels */
- pdmac = kzalloc(pdat->nr_valid_peri * sizeof(*pch)
- + sizeof(*pdmac), GFP_KERNEL);
+ pdmac = kzalloc(sizeof(*pdmac), GFP_KERNEL);
if (!pdmac) {
dev_err(&adev->dev, "unable to allocate mem\n");
return -ENOMEM;
@@ -685,7 +685,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
pi = &pdmac->pif;
pi->dev = &adev->dev;
pi->pl330_data = NULL;
- pi->mcbufsz = pdat->mcbuf_sz;
+ pi->mcbufsz = pdat ? pdat->mcbuf_sz : 0;

res = &adev->res;
request_mem_region(res->start, resource_size(res), "dma-pl330");
@@ -717,27 +717,35 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
INIT_LIST_HEAD(&pd->channels);

/* Initialize channel parameters */
- for (i = 0; i < pdat->nr_valid_peri; i++) {
- struct dma_pl330_peri *peri = &pdat->peri[i];
- pch = &pdmac->peripherals[i];
+ num_chan = max(pdat->nr_valid_peri, (u8)pi->pcfg.num_chan);
+ pdmac->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL);

- switch (peri->rqtype) {
- case MEMTOMEM:
+ for (i = 0; i < num_chan; i++) {
+ pch = &pdmac->peripherals[i];
+ if (pdat) {
+ struct dma_pl330_peri *peri = &pdat->peri[i];
+
+ switch (peri->rqtype) {
+ case MEMTOMEM:
+ dma_cap_set(DMA_MEMCPY, pd->cap_mask);
+ break;
+ case MEMTODEV:
+ case DEVTOMEM:
+ dma_cap_set(DMA_SLAVE, pd->cap_mask);
+ break;
+ default:
+ dev_err(&adev->dev, "DEVTODEV Not Supported\n");
+ continue;
+ }
+ pch->chan.private = peri;
+ } else {
dma_cap_set(DMA_MEMCPY, pd->cap_mask);
- break;
- case MEMTODEV:
- case DEVTOMEM:
- dma_cap_set(DMA_SLAVE, pd->cap_mask);
- break;
- default:
- dev_err(&adev->dev, "DEVTODEV Not Supported\n");
- continue;
+ pch->chan.private = NULL;
}

INIT_LIST_HEAD(&pch->work_list);
spin_lock_init(&pch->lock);
pch->pl330_chid = NULL;
- pch->chan.private = peri;
pch->chan.device = pd;
pch->chan.chan_id = i;
pch->dmac = pdmac;
--
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/