[PATCH 08/11] misc: Kconfig and Makefile changes for inv_mpu driver

[Nathan Royer]

Signed-off-by: Nathan Royer <nroyer@xxxxxxxxxxxxxx>
---
 drivers/misc/Kconfig          |    1 +
 drivers/misc/Makefile         |    1 +
 drivers/misc/inv_mpu/Kconfig  |   58 +++++++++++++++++++++++++++++++++++++++++
 drivers/misc/inv_mpu/Makefile |   17 ++++++++++++
 4 files changed, 77 insertions(+), 0 deletions(-)
 create mode 100644 drivers/misc/inv_mpu/Kconfig
 create mode 100644 drivers/misc/inv_mpu/Makefile

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 4e349cd..2dc231d 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -493,6 +493,7 @@ config PCH_PHUB
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
+source "drivers/misc/inv_mpu/Kconfig"
 source "drivers/misc/iwmc3200top/Kconfig"
 source "drivers/misc/ti-st/Kconfig"
 source "drivers/misc/lis3lv02d/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 5f03172..3b371cf 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_DS1682)		+= ds1682.o
 obj-$(CONFIG_TI_DAC7512)	+= ti_dac7512.o
 obj-$(CONFIG_C2PORT)		+= c2port/
 obj-$(CONFIG_IWMC3200TOP)      += iwmc3200top/
+obj-y				+= inv_mpu/
 obj-$(CONFIG_HMC6352)		+= hmc6352.o
 obj-y				+= eeprom/
 obj-y				+= cb710/
diff --git a/drivers/misc/inv_mpu/Kconfig b/drivers/misc/inv_mpu/Kconfig
new file mode 100644
index 0000000..fdfa7a6
--- /dev/null
+++ b/drivers/misc/inv_mpu/Kconfig
@@ -0,0 +1,58 @@
+
+menuconfig: INV_SENSORS
+	tristate "Motion Processing Unit"
+	depends on I2C
+	default y
+
+if INV_SENSORS
+
+choice
+	prompt "MPU Master"
+	depends on I2C && INV_SENSORS
+	default MPU_SENSORS_MPU3050
+
+config MPU_SENSORS_MPU3050
+	bool "MPU3050"
+	depends on I2C
+	select MPU_SENSORS_MPU3050_GYRO
+	help
+	  If you say yes here you get support for the MPU3050 Gyroscope driver
+	  This driver can also be built as a module.  If so, the module
+	  will be called mpu3050.
+
+config MPU_SENSORS_MPU6050A2
+	bool "MPU6050A2"
+	depends on I2C
+	select MPU_SENSORS_MPU6050_GYRO
+	help
+	  If you say yes here you get support for the MPU6050A2 Gyroscope driver
+	  This driver can also be built as a module.  If so, the module
+	  will be called mpu6050a2.
+
+config MPU_SENSORS_MPU6050B1
+	bool "MPU6050B1"
+	select MPU_SENSORS_MPU6050_GYRO
+	depends on I2C
+	help
+	  If you say yes here you get support for the MPU6050 Gyroscope driver
+	  This driver can also be built as a module.  If so, the module
+	  will be called mpu6050b1.
+
+endchoice
+
+choice
+	prompt "Gyroscope Type"
+	depends on I2C && INV_SENSORS
+	default MPU_SENSORS_MPU3050_GYRO
+
+config MPU_SENSORS_MPU3050_GYRO
+	bool "MPU3050 built in gyroscope"
+	depends on MPU_SENSORS_MPU3050
+
+config MPU_SENSORS_MPU6050_GYRO
+	bool "MPU6050 built in gyroscope"
+	depends on MPU_SENSORS_MPU6050B1 || MPU_SENSORS_MPU6050A2
+
+endchoice
+
+endif #INV_SENSORS
diff --git a/drivers/misc/inv_mpu/Makefile b/drivers/misc/inv_mpu/Makefile
new file mode 100644
index 0000000..48fc55a
--- /dev/null
+++ b/drivers/misc/inv_mpu/Makefile
@@ -0,0 +1,17 @@
+
+# Kernel makefile for motions sensors
+#
+#
+
+# MPU
+
+obj-$(CONFIG_INV_SENSORS)	+= mpu3050.o
+
+mpu3050-objs += mpuirq.o
+mpu3050-objs += slaveirq.o
+mpu3050-objs += mpu-dev.o
+mpu3050-objs += mlsl.o
+mpu3050-objs += mldl_cfg.o
+mpu3050-objs += mldl_print_cfg.o
+
+EXTRA_CFLAGS += -Idrivers/misc/inv_mpu
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/