[PATCH/RESEND v15 7/10] usb:gadget: Add SuperSpeed support to the Gadget Framework

From: Tatyana Brokhman
Date: Mon Jun 06 2011 - 07:43:18 EST


This patch adds the SuperSpeed functionality to the gadget framework.
Support for new SuperSpeed BOS descriptor was added.
Support for SET_FEATURE and GET_STATUS requests in SuperSpeed mode was
added.

Signed-off-by: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>

---
drivers/usb/gadget/Kconfig | 6 +
drivers/usb/gadget/composite.c | 257 ++++++++++++++++++++++++++++++++++++---
drivers/usb/gadget/epautoconf.c | 6 +-
include/linux/usb/composite.h | 14 ++
include/linux/usb/gadget.h | 31 +++++
5 files changed, 293 insertions(+), 21 deletions(-)

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 58456d1..5927541 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -640,6 +640,12 @@ config USB_GADGET_DUALSPEED
Means that gadget drivers should include extra descriptors
and code to handle dual-speed controllers.

+# Selected by UDC drivers that support super-speed opperation
+config USB_GADGET_SUPERSPEED
+ bool
+ depends on USB_GADGET
+ depends on USB_GADGET_DUALSPEED
+
#
# USB Gadget Drivers
#
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 897e4f5..d825dbc 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -27,7 +27,7 @@
#include <linux/utsname.h>

#include <linux/usb/composite.h>
-
+#include <linux/unaligned/access_ok.h>

/*
* The code in this file is utility code, used to build a gadget driver
@@ -128,6 +128,9 @@ int config_ep_by_speed(struct usb_gadget *g,
struct usb_endpoint_descriptor *chosen_desc = NULL;
struct usb_descriptor_header **speed_desc = NULL;

+ struct usb_ss_ep_comp_descriptor *comp_desc = NULL;
+ int want_comp_desc = 0;
+
struct usb_descriptor_header **d_spd; /* cursor for speed desc */

if (!g || !f || !_ep)
@@ -135,6 +138,13 @@ int config_ep_by_speed(struct usb_gadget *g,

/* select desired speed */
switch (g->speed) {
+ case USB_SPEED_SUPER:
+ if (gadget_is_superspeed(g)) {
+ speed_desc = f->ss_descriptors;
+ want_comp_desc = 1;
+ break;
+ }
+ /* else: Fall trough */
case USB_SPEED_HIGH:
if (gadget_is_dualspeed(g)) {
speed_desc = f->hs_descriptors;
@@ -156,7 +166,36 @@ ep_found:
/* commit results */
_ep->maxpacket = le16_to_cpu(chosen_desc->wMaxPacketSize);
_ep->desc = chosen_desc;
+ _ep->comp_desc = NULL;
+ _ep->maxburst = 0;
+ _ep->mult = 0;
+ if (!want_comp_desc)
+ return 0;

+ /*
+ * Companion descriptor should follow EP descriptor
+ * USB 3.0 spec, #9.6.7
+ */
+ comp_desc = (struct usb_ss_ep_comp_descriptor *)*(++d_spd);
+ if (!comp_desc ||
+ (comp_desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP))
+ return -EIO;
+ _ep->comp_desc = comp_desc;
+ if (g->speed == USB_SPEED_SUPER) {
+ switch (usb_endpoint_type(_ep->desc)) {
+ case USB_ENDPOINT_XFER_BULK:
+ case USB_ENDPOINT_XFER_INT:
+ _ep->maxburst = comp_desc->bMaxBurst;
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ /* mult: bits 1:0 of bmAttributes */
+ _ep->mult = comp_desc->bmAttributes & 0x3;
+ break;
+ default:
+ /* Do nothing for control endpoints */
+ break;
+ }
+ }
return 0;
}

@@ -208,6 +247,8 @@ int usb_add_function(struct usb_configuration *config,
config->fullspeed = true;
if (!config->highspeed && function->hs_descriptors)
config->highspeed = true;
+ if (!config->superspeed && function->ss_descriptors)
+ config->superspeed = true;

done:
if (value)
@@ -351,10 +392,17 @@ static int config_buf(struct usb_configuration *config,
list_for_each_entry(f, &config->functions, list) {
struct usb_descriptor_header **descriptors;

- if (speed == USB_SPEED_HIGH)
+ switch (speed) {
+ case USB_SPEED_SUPER:
+ descriptors = f->ss_descriptors;
+ break;
+ case USB_SPEED_HIGH:
descriptors = f->hs_descriptors;
- else
+ break;
+ default:
descriptors = f->descriptors;
+ }
+
if (!descriptors)
continue;
status = usb_descriptor_fillbuf(next, len,
@@ -377,9 +425,10 @@ static int config_desc(struct usb_composite_dev *cdev, unsigned w_value)
u8 type = w_value >> 8;
enum usb_device_speed speed = USB_SPEED_UNKNOWN;

- if (gadget_is_dualspeed(gadget)) {
- int hs = 0;
-
+ if (gadget->speed == USB_SPEED_SUPER)
+ speed = gadget->speed;
+ else if (gadget_is_dualspeed(gadget)) {
+ int hs = 0;
if (gadget->speed == USB_SPEED_HIGH)
hs = 1;
if (type == USB_DT_OTHER_SPEED_CONFIG)
@@ -393,13 +442,20 @@ static int config_desc(struct usb_composite_dev *cdev, unsigned w_value)
w_value &= 0xff;
list_for_each_entry(c, &cdev->configs, list) {
/* ignore configs that won't work at this speed */
- if (speed == USB_SPEED_HIGH) {
+ switch (speed) {
+ case USB_SPEED_SUPER:
+ if (!c->superspeed)
+ continue;
+ break;
+ case USB_SPEED_HIGH:
if (!c->highspeed)
continue;
- } else {
+ break;
+ default:
if (!c->fullspeed)
continue;
}
+
if (w_value == 0)
return config_buf(c, speed, cdev->req->buf, type);
w_value--;
@@ -413,16 +469,22 @@ static int count_configs(struct usb_composite_dev *cdev, unsigned type)
struct usb_configuration *c;
unsigned count = 0;
int hs = 0;
+ int ss = 0;

if (gadget_is_dualspeed(gadget)) {
if (gadget->speed == USB_SPEED_HIGH)
hs = 1;
+ if (gadget->speed == USB_SPEED_SUPER)
+ ss = 1;
if (type == USB_DT_DEVICE_QUALIFIER)
hs = !hs;
}
list_for_each_entry(c, &cdev->configs, list) {
/* ignore configs that won't work at this speed */
- if (hs) {
+ if (ss) {
+ if (!c->superspeed)
+ continue;
+ } else if (hs) {
if (!c->highspeed)
continue;
} else {
@@ -434,6 +496,71 @@ static int count_configs(struct usb_composite_dev *cdev, unsigned type)
return count;
}

+/**
+ * bos_desc() - prepares the BOS descriptor.
+ * @cdev: pointer to usb_composite device to generate the bos
+ * descriptor for
+ *
+ * This function generates the BOS (Binary Device Object)
+ * descriptor and its device capabilities descriptors. The BOS
+ * descriptor should be supported by a SuperSpeed device.
+ */
+static int bos_desc(struct usb_composite_dev *cdev)
+{
+ struct usb_ext_cap_descriptor *usb_ext;
+ struct usb_ss_cap_descriptor *ss_cap;
+ struct usb_dcd_config_params dcd_config_params;
+ struct usb_bos_descriptor *bos = cdev->req->buf;
+
+ bos->bLength = USB_DT_BOS_SIZE;
+ bos->bDescriptorType = USB_DT_BOS;
+
+ bos->wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE);
+ bos->bNumDeviceCaps = 0;
+
+ /*
+ * A SuperSpeed device shall include the USB2.0 extension descriptor
+ * and shall support LPM when operating in USB2.0 HS mode.
+ */
+ usb_ext = cdev->req->buf + le16_to_cpu(bos->wTotalLength);
+ bos->bNumDeviceCaps++;
+ le16_add_cpu(&bos->wTotalLength, USB_DT_USB_EXT_CAP_SIZE);
+ usb_ext->bLength = USB_DT_USB_EXT_CAP_SIZE;
+ usb_ext->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
+ usb_ext->bDevCapabilityType = USB_CAP_TYPE_EXT;
+ usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT);
+
+ /*
+ * The Superspeed USB Capability descriptor shall be implemented by all
+ * SuperSpeed devices.
+ */
+ ss_cap = cdev->req->buf + le16_to_cpu(bos->wTotalLength);
+ bos->bNumDeviceCaps++;
+ le16_add_cpu(&bos->wTotalLength, USB_DT_USB_SS_CAP_SIZE);
+ ss_cap->bLength = USB_DT_USB_SS_CAP_SIZE;
+ ss_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
+ ss_cap->bDevCapabilityType = USB_SS_CAP_TYPE;
+ ss_cap->bmAttributes = 0; /* LTM is not supported yet */
+ ss_cap->wSpeedSupported = cpu_to_le16(USB_LOW_SPEED_OPERATION |
+ USB_FULL_SPEED_OPERATION |
+ USB_HIGH_SPEED_OPERATION |
+ USB_5GBPS_OPERATION);
+ ss_cap->bFunctionalitySupport = USB_LOW_SPEED_OPERATION;
+
+ /* Get Controller configuration */
+ if (cdev->gadget->ops->get_config_params)
+ cdev->gadget->ops->get_config_params(&dcd_config_params);
+ else {
+ dcd_config_params.bU1devExitLat = USB_DEFULT_U1_DEV_EXIT_LAT;
+ dcd_config_params.bU2DevExitLat =
+ cpu_to_le16(USB_DEFULT_U2_DEV_EXIT_LAT);
+ }
+ ss_cap->bU1devExitLat = dcd_config_params.bU1devExitLat;
+ ss_cap->bU2DevExitLat = dcd_config_params.bU2DevExitLat;
+
+ return le16_to_cpu(bos->wTotalLength);
+}
+
static void device_qual(struct usb_composite_dev *cdev)
{
struct usb_qualifier_descriptor *qual = cdev->req->buf;
@@ -477,20 +604,27 @@ static int set_config(struct usb_composite_dev *cdev,
unsigned power = gadget_is_otg(gadget) ? 8 : 100;
int tmp;

- if (cdev->config)
- reset_config(cdev);
-
if (number) {
list_for_each_entry(c, &cdev->configs, list) {
if (c->bConfigurationValue == number) {
+ /*
+ * We disable the FDs of the previous
+ * configuration only if the new configuration
+ * is a valid one
+ */
+ if (cdev->config)
+ reset_config(cdev);
result = 0;
break;
}
}
if (result < 0)
goto done;
- } else
+ } else { /* Zero configuration value - need to reset the config */
+ if (cdev->config)
+ reset_config(cdev);
result = 0;
+ }

INFO(cdev, "%s speed config #%d: %s\n",
({ char *speed;
@@ -504,6 +638,9 @@ static int set_config(struct usb_composite_dev *cdev,
case USB_SPEED_HIGH:
speed = "high";
break;
+ case USB_SPEED_SUPER:
+ speed = "super";
+ break;
default:
speed = "?";
break;
@@ -528,10 +665,16 @@ static int set_config(struct usb_composite_dev *cdev,
* function's setup callback instead of the current
* configuration's setup callback.
*/
- if (gadget->speed == USB_SPEED_HIGH)
+ switch (gadget->speed) {
+ case USB_SPEED_SUPER:
+ descriptors = f->ss_descriptors;
+ break;
+ case USB_SPEED_HIGH:
descriptors = f->hs_descriptors;
- else
+ break;
+ default:
descriptors = f->descriptors;
+ }

for (; *descriptors; ++descriptors) {
struct usb_endpoint_descriptor *ep;
@@ -624,8 +767,9 @@ int usb_add_config(struct usb_composite_dev *cdev,
} else {
unsigned i;

- DBG(cdev, "cfg %d/%p speeds:%s%s\n",
+ DBG(cdev, "cfg %d/%p speeds:%s%s%s\n",
config->bConfigurationValue, config,
+ config->superspeed ? " super" : "",
config->highspeed ? " high" : "",
config->fullspeed
? (gadget_is_dualspeed(cdev->gadget)
@@ -904,6 +1048,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
struct usb_composite_dev *cdev = get_gadget_data(gadget);
struct usb_request *req = cdev->req;
int value = -EOPNOTSUPP;
+ int status = 0;
u16 w_index = le16_to_cpu(ctrl->wIndex);
u8 intf = w_index & 0xFF;
u16 w_value = le16_to_cpu(ctrl->wValue);
@@ -931,18 +1076,29 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
case USB_DT_DEVICE:
cdev->desc.bNumConfigurations =
count_configs(cdev, USB_DT_DEVICE);
+ cdev->desc.bMaxPacketSize0 =
+ cdev->gadget->ep0->maxpacket;
+ if (gadget_is_superspeed(gadget)) {
+ if (gadget->speed >= USB_SPEED_SUPER)
+ cdev->desc.bcdUSB = cpu_to_le16(0x0300);
+ else
+ cdev->desc.bcdUSB = cpu_to_le16(0x0210);
+ }
+
value = min(w_length, (u16) sizeof cdev->desc);
memcpy(req->buf, &cdev->desc, value);
break;
case USB_DT_DEVICE_QUALIFIER:
- if (!gadget_is_dualspeed(gadget))
+ if (!gadget_is_dualspeed(gadget) ||
+ gadget->speed >= USB_SPEED_SUPER)
break;
device_qual(cdev);
value = min_t(int, w_length,
sizeof(struct usb_qualifier_descriptor));
break;
case USB_DT_OTHER_SPEED_CONFIG:
- if (!gadget_is_dualspeed(gadget))
+ if (!gadget_is_dualspeed(gadget) ||
+ gadget->speed >= USB_SPEED_SUPER)
break;
/* FALLTHROUGH */
case USB_DT_CONFIG:
@@ -956,6 +1112,12 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
if (value >= 0)
value = min(w_length, (u16) value);
break;
+ case USB_DT_BOS:
+ if (gadget_is_superspeed(gadget)) {
+ value = bos_desc(cdev);
+ value = min(w_length, (u16) value);
+ }
+ break;
}
break;

@@ -1023,6 +1185,61 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
*((u8 *)req->buf) = value;
value = min(w_length, (u16) 1);
break;
+
+ /*
+ * USB 3.0 additions:
+ * Function driver should handle get_status request. If such cb
+ * wasn't supplied we respond with default value = 0
+ * Note: function driver should supply such cb only for the first
+ * interface of the function
+ */
+ case USB_REQ_GET_STATUS:
+ if (!gadget_is_superspeed(gadget))
+ goto unknown;
+ if (ctrl->bRequestType != (USB_DIR_IN | USB_RECIP_INTERFACE))
+ goto unknown;
+ value = 2; /* This is the length of the get_status reply */
+ put_unaligned_le16(0, req->buf);
+ if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
+ break;
+ f = cdev->config->interface[intf];
+ if (!f)
+ break;
+ status = f->get_status ? f->get_status(f) : 0;
+ if (status < 0)
+ break;
+ put_unaligned_le16(status & 0x0000ffff, req->buf);
+ break;
+ /*
+ * Function drivers should handle SetFeature/ClearFeature
+ * (FUNCTION_SUSPEND) request. function_suspend cb should be supplied
+ * only for the first interface of the function
+ */
+ case USB_REQ_CLEAR_FEATURE:
+ case USB_REQ_SET_FEATURE:
+ if (!gadget_is_superspeed(gadget))
+ goto unknown;
+ if (ctrl->bRequestType != (USB_DIR_OUT | USB_RECIP_INTERFACE))
+ goto unknown;
+ switch (w_value) {
+ case USB_INTRF_FUNC_SUSPEND:
+ if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
+ break;
+ f = cdev->config->interface[intf];
+ if (!f)
+ break;
+ value = 0;
+ if (f->func_suspend)
+ value = f->func_suspend(f, w_index >> 8);
+ if (value < 0) {
+ ERROR(cdev,
+ "func_suspend() returned error %d\n",
+ value);
+ value = 0;
+ }
+ break;
+ }
+ break;
default:
unknown:
VDBG(cdev,
@@ -1340,7 +1557,11 @@ composite_resume(struct usb_gadget *gadget)
/*-------------------------------------------------------------------------*/

static struct usb_gadget_driver composite_driver = {
+#ifdef CONFIG_USB_GADGET_SUPERSPEED
+ .speed = USB_SPEED_SUPER,
+#else
.speed = USB_SPEED_HIGH,
+#endif /* CONFIG_USB_GADGET_SUPERSPEED */

.unbind = composite_unbind,

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 91c032f..7a7e6b7 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -161,13 +161,13 @@ ep_matches (
max = 0x7ff & le16_to_cpu(desc->wMaxPacketSize);
switch (type) {
case USB_ENDPOINT_XFER_INT:
- /* INT: limit 64 bytes full speed, 1024 high speed */
+ /* INT: limit 64 bytes full speed, 1024 high/super speed */
if (!gadget->is_dualspeed && max > 64)
return 0;
/* FALLTHROUGH */

case USB_ENDPOINT_XFER_ISOC:
- /* ISO: limit 1023 bytes full speed, 1024 high speed */
+ /* ISO: limit 1023 bytes full speed, 1024 high/super speed */
if (ep->maxpacket < max)
return 0;
if (!gadget->is_dualspeed && max > 1023)
@@ -202,7 +202,7 @@ ep_matches (
}

/* report (variable) full speed bulk maxpacket */
- if (USB_ENDPOINT_XFER_BULK == type) {
+ if ((USB_ENDPOINT_XFER_BULK == type) && !ep_comp) {
int size = ep->maxpacket;

/* min() doesn't work on bitfields with gcc-3.5 */
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index a3e72df..a316fba 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -59,6 +59,10 @@ struct usb_configuration;
* @hs_descriptors: Table of high speed descriptors, using interface and
* string identifiers assigned during @bind(). If this pointer is null,
* the function will not be available at high speed.
+ * @ss_descriptors: Table of super speed descriptors, using interface and
+ * string identifiers assigned during @bind(). If this
+ * pointer is null after initiation, the function will not
+ * be available at super speed.
* @config: assigned when @usb_add_function() is called; this is the
* configuration with which this function is associated.
* @bind: Before the gadget can register, all of its functions bind() to the
@@ -77,6 +81,10 @@ struct usb_configuration;
* @setup: Used for interface-specific control requests.
* @suspend: Notifies functions when the host stops sending USB traffic.
* @resume: Notifies functions when the host restarts USB traffic.
+ * @get_status: Returns function status as a reply to
+ * GetStatus() request when the recepient is Interface.
+ * @func_suspend: callback to be called when
+ * SetFeature(FUNCTION_SUSPEND) is reseived
*
* A single USB function uses one or more interfaces, and should in most
* cases support operation at both full and high speeds. Each function is
@@ -106,6 +114,7 @@ struct usb_function {
struct usb_gadget_strings **strings;
struct usb_descriptor_header **descriptors;
struct usb_descriptor_header **hs_descriptors;
+ struct usb_descriptor_header **ss_descriptors;

struct usb_configuration *config;

@@ -132,6 +141,10 @@ struct usb_function {
void (*suspend)(struct usb_function *);
void (*resume)(struct usb_function *);

+ /* USB 3.0 additions */
+ int (*get_status)(struct usb_function *);
+ int (*func_suspend)(struct usb_function *,
+ u8 suspend_opt);
/* private: */
/* internals */
struct list_head list;
@@ -219,6 +232,7 @@ struct usb_configuration {
struct list_head list;
struct list_head functions;
u8 next_interface_id;
+ unsigned superspeed:1;
unsigned highspeed:1;
unsigned fullspeed:1;
struct usb_function *interface[MAX_CONFIG_INTERFACES];
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 1ab9951..66d461e 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -135,6 +135,8 @@ struct usb_ep_ops {
* the endpoint descriptor used to configure the endpoint.
* @max_streams: The maximum number of streams supported
* by this EP (0 - 16, actual number is 2^n)
+ * @mult: multiplier, 'mult' value for SS Isoc EPs
+ * @maxburst: the maximum number of bursts supported by this EP (for usb3)
* @driver_data:for use by the gadget driver.
* @address: used to identify the endpoint when finding descriptor that
* matches connection speed
@@ -155,6 +157,8 @@ struct usb_ep {
struct list_head ep_list;
unsigned maxpacket:16;
unsigned max_streams:16;
+ unsigned mult:2;
+ unsigned maxburst:4;
u8 address;
const struct usb_endpoint_descriptor *desc;
const struct usb_ss_ep_comp_descriptor *comp_desc;
@@ -425,6 +429,14 @@ static inline void usb_ep_fifo_flush(struct usb_ep *ep)

/*-------------------------------------------------------------------------*/

+struct usb_dcd_config_params {
+ __u8 bU1devExitLat; /* U1 Device exit Latency */
+#define USB_DEFULT_U1_DEV_EXIT_LAT 0x01 /* Less then 1 microsec */
+ __le16 bU2DevExitLat; /* U2 Device exit Latency */
+#define USB_DEFULT_U2_DEV_EXIT_LAT 0x1F4 /* Less then 500 microsec */
+};
+
+
struct usb_gadget;

/* the rest of the api to the controller hardware: device operations,
@@ -439,6 +451,7 @@ struct usb_gadget_ops {
int (*pullup) (struct usb_gadget *, int is_on);
int (*ioctl)(struct usb_gadget *,
unsigned code, unsigned long param);
+ void (*get_config_params)(struct usb_dcd_config_params *);
};

/**
@@ -530,6 +543,24 @@ static inline int gadget_is_dualspeed(struct usb_gadget *g)
}

/**
+ * gadget_is_superspeed() - return true if the hardware handles
+ * supperspeed
+ * @g: controller that might support supper speed
+ */
+static inline int gadget_is_superspeed(struct usb_gadget *g)
+{
+#ifdef CONFIG_USB_GADGET_SUPERSPEED
+ /*
+ * runtime test would check "g->is_superspeed" ... that might be
+ * useful to work around hardware bugs, but is mostly pointless
+ */
+ return 1;
+#else
+ return 0;
+#endif
+}
+
+/**
* gadget_is_otg - return true iff the hardware is OTG-ready
* @g: controller that might have a Mini-AB connector
*
--
1.7.3.3

--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/