[PATCH 3/5 v2] [media] ov9740: Fixed some settings

[achew]

From: Andrew Chew <achew@xxxxxxxxxx>

Based on vendor feedback, should issue a software reset at start of day.

Also, OV9740_ANALOG_CTRL15 needs to be changed so the sensor does not begin
streaming until it is ready (otherwise, results in a nonsense frame for the
initial frame).

For discontinuous clocks, need to change OV9740_MIPI_CTRL00.

Finally, OV9740_ISP_CTRL19 needs to be changed to really use YUYV ordering
(the previous value was for VYUY).

Signed-off-by: Andrew Chew <achew@xxxxxxxxxx>
---
 drivers/media/video/ov9740.c |   10 +++++++++-
 1 files changed, 9 insertions(+), 1 deletions(-)

diff --git a/drivers/media/video/ov9740.c b/drivers/media/video/ov9740.c
index d5c9061..9d7c74d 100644
--- a/drivers/media/video/ov9740.c
+++ b/drivers/media/video/ov9740.c
@@ -68,6 +68,7 @@
 #define OV9740_ANALOG_CTRL04		0x3604
 #define OV9740_ANALOG_CTRL10		0x3610
 #define OV9740_ANALOG_CTRL12		0x3612
+#define OV9740_ANALOG_CTRL15		0x3615
 #define OV9740_ANALOG_CTRL20		0x3620
 #define OV9740_ANALOG_CTRL21		0x3621
 #define OV9740_ANALOG_CTRL22		0x3622
@@ -222,6 +223,9 @@ struct ov9740_priv {
 };
 
 static const struct ov9740_reg ov9740_defaults[] = {
+	/* Software Reset */
+	{ OV9740_SOFTWARE_RESET,	0x01 },
+
 	/* Banding Filter */
 	{ OV9740_AEC_B50_STEP_HI,	0x00 },
 	{ OV9740_AEC_B50_STEP_LO,	0xe8 },
@@ -333,6 +337,7 @@ static const struct ov9740_reg ov9740_defaults[] = {
 	{ OV9740_ANALOG_CTRL10,		0xa1 },
 	{ OV9740_ANALOG_CTRL12,		0x24 },
 	{ OV9740_ANALOG_CTRL22,		0x9f },
+	{ OV9740_ANALOG_CTRL15,		0xf0 },
 
 	/* Sensor Control */
 	{ OV9740_SENSOR_CTRL03,		0x42 },
@@ -385,7 +390,7 @@ static const struct ov9740_reg ov9740_defaults[] = {
 	{ OV9740_LN_LENGTH_PCK_LO,	0x62 },
 
 	/* MIPI Control */
-	{ OV9740_MIPI_CTRL00,		0x44 },
+	{ OV9740_MIPI_CTRL00,		0x64 }, /* 0x44 for continuous clock */
 	{ OV9740_MIPI_3837,		0x01 },
 	{ OV9740_MIPI_CTRL01,		0x0f },
 	{ OV9740_MIPI_CTRL03,		0x05 },
@@ -393,6 +398,9 @@ static const struct ov9740_reg ov9740_defaults[] = {
 	{ OV9740_VFIFO_RD_CTRL,		0x16 },
 	{ OV9740_MIPI_CTRL_3012,	0x70 },
 	{ OV9740_SC_CMMM_MIPI_CTR,	0x01 },
+
+	/* YUYV order */
+	{ OV9740_ISP_CTRL19,		0x02 },
 };
 
 static const struct ov9740_reg ov9740_regs_vga[] = {
-- 
1.7.5.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/