[PATCH 05/13] mach-ux500: rename PRCMU driver per SoC
From: Linus Walleij
Date: Sat May 21 2011 - 04:42:39 EST
From: Linus Walleij <linus.walleij@xxxxxxxxxx>
This renames the prcmu.c file to prcmu-db8500.c so as to indicate
that it is for this one SoC.
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
arch/arm/mach-ux500/Makefile | 2 +-
arch/arm/mach-ux500/prcmu-db8500.c | 394 ++++++++++++++++++++++++++++++++++++
arch/arm/mach-ux500/prcmu.c | 394 ------------------------------------
3 files changed, 395 insertions(+), 395 deletions(-)
create mode 100644 arch/arm/mach-ux500/prcmu-db8500.c
delete mode 100644 arch/arm/mach-ux500/prcmu.c
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index b549a8f..2a08a10 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -5,7 +5,7 @@
obj-y := clock.o cpu.o devices.o devices-common.o \
id.o usb.o
obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o
-obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o prcmu.o
+obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o prcmu-db8500.o
obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \
board-mop500-regulators.o \
board-mop500-uib.o board-mop500-stuib.o \
diff --git a/arch/arm/mach-ux500/prcmu-db8500.c b/arch/arm/mach-ux500/prcmu-db8500.c
new file mode 100644
index 0000000..c522d26
--- /dev/null
+++ b/arch/arm/mach-ux500/prcmu-db8500.c
@@ -0,0 +1,394 @@
+/*
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Kumar Sanghvi <kumar.sanghvi@xxxxxxxxxxxxxx>
+ * Author: Sundar Iyer <sundar.iyer@xxxxxxxxxxxxxx>
+ * Author: Mattias Nilsson <mattias.i.nilsson@xxxxxxxxxxxxxx>
+ *
+ * U8500 PRCM Unit interface driver
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/mutex.h>
+#include <linux/completion.h>
+#include <linux/jiffies.h>
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+
+#include <mach/hardware.h>
+#include <mach/prcmu-regs.h>
+#include <mach/prcmu-defs.h>
+
+/* Global var to runtime determine TCDM base for v2 or v1 */
+static __iomem void *tcdm_base;
+
+#define _MBOX_HEADER (tcdm_base + 0xFE8)
+#define MBOX_HEADER_REQ_MB0 (_MBOX_HEADER + 0x0)
+
+#define REQ_MB1 (tcdm_base + 0xFD0)
+#define REQ_MB5 (tcdm_base + 0xE44)
+
+#define REQ_MB1_ARMOPP (REQ_MB1 + 0x0)
+#define REQ_MB1_APEOPP (REQ_MB1 + 0x1)
+#define REQ_MB1_BOOSTOPP (REQ_MB1 + 0x2)
+
+#define ACK_MB1 (tcdm_base + 0xE04)
+#define ACK_MB5 (tcdm_base + 0xDF4)
+
+#define ACK_MB1_CURR_ARMOPP (ACK_MB1 + 0x0)
+#define ACK_MB1_CURR_APEOPP (ACK_MB1 + 0x1)
+
+#define REQ_MB5_I2C_SLAVE_OP (REQ_MB5)
+#define REQ_MB5_I2C_HW_BITS (REQ_MB5 + 1)
+#define REQ_MB5_I2C_REG (REQ_MB5 + 2)
+#define REQ_MB5_I2C_VAL (REQ_MB5 + 3)
+
+#define ACK_MB5_I2C_STATUS (ACK_MB5 + 1)
+#define ACK_MB5_I2C_VAL (ACK_MB5 + 3)
+
+#define PRCM_AVS_VARM_MAX_OPP (tcdm_base + 0x2E4)
+#define PRCM_AVS_ISMODEENABLE 7
+#define PRCM_AVS_ISMODEENABLE_MASK (1 << PRCM_AVS_ISMODEENABLE)
+
+#define I2C_WRITE(slave) \
+ (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0))
+#define I2C_READ(slave) \
+ (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0) | BIT(0))
+#define I2C_STOP_EN BIT(3)
+
+enum mb1_h {
+ MB1H_ARM_OPP = 1,
+ MB1H_APE_OPP,
+ MB1H_ARM_APE_OPP,
+};
+
+static struct {
+ struct mutex lock;
+ struct completion work;
+ struct {
+ u8 arm_opp;
+ u8 ape_opp;
+ u8 arm_status;
+ u8 ape_status;
+ } ack;
+} mb1_transfer;
+
+enum ack_mb5_status {
+ I2C_WR_OK = 0x01,
+ I2C_RD_OK = 0x02,
+};
+
+#define MBOX_BIT BIT
+#define NUM_MBOX 8
+
+static struct {
+ struct mutex lock;
+ struct completion work;
+ bool failed;
+ struct {
+ u8 status;
+ u8 value;
+ } ack;
+} mb5_transfer;
+
+/**
+ * prcmu_abb_read() - Read register value(s) from the ABB.
+ * @slave: The I2C slave address.
+ * @reg: The (start) register address.
+ * @value: The read out value(s).
+ * @size: The number of registers to read.
+ *
+ * Reads register value(s) from the ABB.
+ * @size has to be 1 for the current firmware version.
+ */
+int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
+{
+ int r;
+
+ if (size != 1)
+ return -EINVAL;
+
+ r = mutex_lock_interruptible(&mb5_transfer.lock);
+ if (r)
+ return r;
+
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
+ cpu_relax();
+
+ writeb(I2C_READ(slave), REQ_MB5_I2C_SLAVE_OP);
+ writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS);
+ writeb(reg, REQ_MB5_I2C_REG);
+
+ writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
+ if (!wait_for_completion_timeout(&mb5_transfer.work,
+ msecs_to_jiffies(500))) {
+ pr_err("prcmu: prcmu_abb_read timed out.\n");
+ r = -EIO;
+ goto unlock_and_return;
+ }
+ r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO);
+ if (!r)
+ *value = mb5_transfer.ack.value;
+
+unlock_and_return:
+ mutex_unlock(&mb5_transfer.lock);
+ return r;
+}
+EXPORT_SYMBOL(prcmu_abb_read);
+
+/**
+ * prcmu_abb_write() - Write register value(s) to the ABB.
+ * @slave: The I2C slave address.
+ * @reg: The (start) register address.
+ * @value: The value(s) to write.
+ * @size: The number of registers to write.
+ *
+ * Reads register value(s) from the ABB.
+ * @size has to be 1 for the current firmware version.
+ */
+int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
+{
+ int r;
+
+ if (size != 1)
+ return -EINVAL;
+
+ r = mutex_lock_interruptible(&mb5_transfer.lock);
+ if (r)
+ return r;
+
+
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
+ cpu_relax();
+
+ writeb(I2C_WRITE(slave), REQ_MB5_I2C_SLAVE_OP);
+ writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS);
+ writeb(reg, REQ_MB5_I2C_REG);
+ writeb(*value, REQ_MB5_I2C_VAL);
+
+ writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
+ if (!wait_for_completion_timeout(&mb5_transfer.work,
+ msecs_to_jiffies(500))) {
+ pr_err("prcmu: prcmu_abb_write timed out.\n");
+ r = -EIO;
+ goto unlock_and_return;
+ }
+ r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO);
+
+unlock_and_return:
+ mutex_unlock(&mb5_transfer.lock);
+ return r;
+}
+EXPORT_SYMBOL(prcmu_abb_write);
+
+static int set_ape_cpu_opps(u8 header, enum prcmu_ape_opp ape_opp,
+ enum prcmu_cpu_opp cpu_opp)
+{
+ bool do_ape;
+ bool do_arm;
+ int err = 0;
+
+ do_ape = ((header == MB1H_APE_OPP) || (header == MB1H_ARM_APE_OPP));
+ do_arm = ((header == MB1H_ARM_OPP) || (header == MB1H_ARM_APE_OPP));
+
+ mutex_lock(&mb1_transfer.lock);
+
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+ cpu_relax();
+
+ writeb(0, MBOX_HEADER_REQ_MB0);
+ writeb(cpu_opp, REQ_MB1_ARMOPP);
+ writeb(ape_opp, REQ_MB1_APEOPP);
+ writeb(0, REQ_MB1_BOOSTOPP);
+ writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
+ wait_for_completion(&mb1_transfer.work);
+ if ((do_ape) && (mb1_transfer.ack.ape_status != 0))
+ err = -EIO;
+ if ((do_arm) && (mb1_transfer.ack.arm_status != 0))
+ err = -EIO;
+
+ mutex_unlock(&mb1_transfer.lock);
+
+ return err;
+}
+
+/**
+ * prcmu_set_ape_opp() - Set the OPP of the APE.
+ * @opp: The OPP to set.
+ *
+ * This function sets the OPP of the APE.
+ */
+int prcmu_set_ape_opp(enum prcmu_ape_opp opp)
+{
+ return set_ape_cpu_opps(MB1H_APE_OPP, opp, APE_OPP_NO_CHANGE);
+}
+EXPORT_SYMBOL(prcmu_set_ape_opp);
+
+/**
+ * prcmu_set_cpu_opp() - Set the OPP of the CPU.
+ * @opp: The OPP to set.
+ *
+ * This function sets the OPP of the CPU.
+ */
+int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp)
+{
+ return set_ape_cpu_opps(MB1H_ARM_OPP, CPU_OPP_NO_CHANGE, opp);
+}
+EXPORT_SYMBOL(prcmu_set_cpu_opp);
+
+/**
+ * prcmu_set_ape_cpu_opps() - Set the OPPs of the APE and the CPU.
+ * @ape_opp: The APE OPP to set.
+ * @cpu_opp: The CPU OPP to set.
+ *
+ * This function sets the OPPs of the APE and the CPU.
+ */
+int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp,
+ enum prcmu_cpu_opp cpu_opp)
+{
+ return set_ape_cpu_opps(MB1H_ARM_APE_OPP, ape_opp, cpu_opp);
+}
+EXPORT_SYMBOL(prcmu_set_ape_cpu_opps);
+
+/**
+ * prcmu_get_ape_opp() - Get the OPP of the APE.
+ *
+ * This function gets the OPP of the APE.
+ */
+enum prcmu_ape_opp prcmu_get_ape_opp(void)
+{
+ return readb(ACK_MB1_CURR_APEOPP);
+}
+EXPORT_SYMBOL(prcmu_get_ape_opp);
+
+/**
+ * prcmu_get_cpu_opp() - Get the OPP of the CPU.
+ *
+ * This function gets the OPP of the CPU. The OPP is specified in %%.
+ * PRCMU_OPP_EXT is a special OPP value, not specified in %%.
+ */
+int prcmu_get_cpu_opp(void)
+{
+ return readb(ACK_MB1_CURR_ARMOPP);
+}
+EXPORT_SYMBOL(prcmu_get_cpu_opp);
+
+bool prcmu_has_arm_maxopp(void)
+{
+ return (readb(PRCM_AVS_VARM_MAX_OPP) & PRCM_AVS_ISMODEENABLE_MASK)
+ == PRCM_AVS_ISMODEENABLE_MASK;
+}
+
+static void read_mailbox_0(void)
+{
+ writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_1(void)
+{
+ mb1_transfer.ack.arm_opp = readb(ACK_MB1_CURR_ARMOPP);
+ mb1_transfer.ack.ape_opp = readb(ACK_MB1_CURR_APEOPP);
+ complete(&mb1_transfer.work);
+ writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_2(void)
+{
+ writel(MBOX_BIT(2), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_3(void)
+{
+ writel(MBOX_BIT(3), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_4(void)
+{
+ writel(MBOX_BIT(4), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_5(void)
+{
+ mb5_transfer.ack.status = readb(ACK_MB5_I2C_STATUS);
+ mb5_transfer.ack.value = readb(ACK_MB5_I2C_VAL);
+ complete(&mb5_transfer.work);
+ writel(MBOX_BIT(5), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_6(void)
+{
+ writel(MBOX_BIT(6), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_7(void)
+{
+ writel(MBOX_BIT(7), PRCM_ARM_IT1_CLEAR);
+}
+
+static void (* const read_mailbox[NUM_MBOX])(void) = {
+ read_mailbox_0,
+ read_mailbox_1,
+ read_mailbox_2,
+ read_mailbox_3,
+ read_mailbox_4,
+ read_mailbox_5,
+ read_mailbox_6,
+ read_mailbox_7
+};
+
+static irqreturn_t prcmu_irq_handler(int irq, void *data)
+{
+ u32 bits;
+ u8 n;
+
+ bits = (readl(PRCM_ARM_IT1_VAL) & (MBOX_BIT(NUM_MBOX) - 1));
+ if (unlikely(!bits))
+ return IRQ_NONE;
+
+ for (n = 0; bits; n++) {
+ if (bits & MBOX_BIT(n)) {
+ bits -= MBOX_BIT(n);
+ read_mailbox[n]();
+ }
+ }
+ return IRQ_HANDLED;
+}
+
+void __init prcmu_early_init(void)
+{
+ if (cpu_is_u8500v11() || cpu_is_u8500ed()) {
+ tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE_V1);
+ } else if (cpu_is_u8500v2()) {
+ tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE);
+ } else {
+ pr_err("prcmu: Unsupported chip version\n");
+ BUG();
+ }
+}
+
+static int __init prcmu_init(void)
+{
+ if (cpu_is_u8500ed()) {
+ pr_err("prcmu: Unsupported chip version\n");
+ return 0;
+ }
+
+ mutex_init(&mb1_transfer.lock);
+ init_completion(&mb1_transfer.work);
+ mutex_init(&mb5_transfer.lock);
+ init_completion(&mb5_transfer.work);
+
+ /* Clean up the mailbox interrupts after pre-kernel code. */
+ writel((MBOX_BIT(NUM_MBOX) - 1), PRCM_ARM_IT1_CLEAR);
+
+ return request_irq(IRQ_DB8500_PRCMU1, prcmu_irq_handler, 0,
+ "prcmu", NULL);
+}
+
+arch_initcall(prcmu_init);
diff --git a/arch/arm/mach-ux500/prcmu.c b/arch/arm/mach-ux500/prcmu.c
deleted file mode 100644
index c522d26..0000000
--- a/arch/arm/mach-ux500/prcmu.c
+++ /dev/null
@@ -1,394 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- * Author: Kumar Sanghvi <kumar.sanghvi@xxxxxxxxxxxxxx>
- * Author: Sundar Iyer <sundar.iyer@xxxxxxxxxxxxxx>
- * Author: Mattias Nilsson <mattias.i.nilsson@xxxxxxxxxxxxxx>
- *
- * U8500 PRCM Unit interface driver
- *
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/mutex.h>
-#include <linux/completion.h>
-#include <linux/jiffies.h>
-#include <linux/bitops.h>
-#include <linux/interrupt.h>
-
-#include <mach/hardware.h>
-#include <mach/prcmu-regs.h>
-#include <mach/prcmu-defs.h>
-
-/* Global var to runtime determine TCDM base for v2 or v1 */
-static __iomem void *tcdm_base;
-
-#define _MBOX_HEADER (tcdm_base + 0xFE8)
-#define MBOX_HEADER_REQ_MB0 (_MBOX_HEADER + 0x0)
-
-#define REQ_MB1 (tcdm_base + 0xFD0)
-#define REQ_MB5 (tcdm_base + 0xE44)
-
-#define REQ_MB1_ARMOPP (REQ_MB1 + 0x0)
-#define REQ_MB1_APEOPP (REQ_MB1 + 0x1)
-#define REQ_MB1_BOOSTOPP (REQ_MB1 + 0x2)
-
-#define ACK_MB1 (tcdm_base + 0xE04)
-#define ACK_MB5 (tcdm_base + 0xDF4)
-
-#define ACK_MB1_CURR_ARMOPP (ACK_MB1 + 0x0)
-#define ACK_MB1_CURR_APEOPP (ACK_MB1 + 0x1)
-
-#define REQ_MB5_I2C_SLAVE_OP (REQ_MB5)
-#define REQ_MB5_I2C_HW_BITS (REQ_MB5 + 1)
-#define REQ_MB5_I2C_REG (REQ_MB5 + 2)
-#define REQ_MB5_I2C_VAL (REQ_MB5 + 3)
-
-#define ACK_MB5_I2C_STATUS (ACK_MB5 + 1)
-#define ACK_MB5_I2C_VAL (ACK_MB5 + 3)
-
-#define PRCM_AVS_VARM_MAX_OPP (tcdm_base + 0x2E4)
-#define PRCM_AVS_ISMODEENABLE 7
-#define PRCM_AVS_ISMODEENABLE_MASK (1 << PRCM_AVS_ISMODEENABLE)
-
-#define I2C_WRITE(slave) \
- (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0))
-#define I2C_READ(slave) \
- (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0) | BIT(0))
-#define I2C_STOP_EN BIT(3)
-
-enum mb1_h {
- MB1H_ARM_OPP = 1,
- MB1H_APE_OPP,
- MB1H_ARM_APE_OPP,
-};
-
-static struct {
- struct mutex lock;
- struct completion work;
- struct {
- u8 arm_opp;
- u8 ape_opp;
- u8 arm_status;
- u8 ape_status;
- } ack;
-} mb1_transfer;
-
-enum ack_mb5_status {
- I2C_WR_OK = 0x01,
- I2C_RD_OK = 0x02,
-};
-
-#define MBOX_BIT BIT
-#define NUM_MBOX 8
-
-static struct {
- struct mutex lock;
- struct completion work;
- bool failed;
- struct {
- u8 status;
- u8 value;
- } ack;
-} mb5_transfer;
-
-/**
- * prcmu_abb_read() - Read register value(s) from the ABB.
- * @slave: The I2C slave address.
- * @reg: The (start) register address.
- * @value: The read out value(s).
- * @size: The number of registers to read.
- *
- * Reads register value(s) from the ABB.
- * @size has to be 1 for the current firmware version.
- */
-int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
-{
- int r;
-
- if (size != 1)
- return -EINVAL;
-
- r = mutex_lock_interruptible(&mb5_transfer.lock);
- if (r)
- return r;
-
- while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
- cpu_relax();
-
- writeb(I2C_READ(slave), REQ_MB5_I2C_SLAVE_OP);
- writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS);
- writeb(reg, REQ_MB5_I2C_REG);
-
- writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
- if (!wait_for_completion_timeout(&mb5_transfer.work,
- msecs_to_jiffies(500))) {
- pr_err("prcmu: prcmu_abb_read timed out.\n");
- r = -EIO;
- goto unlock_and_return;
- }
- r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO);
- if (!r)
- *value = mb5_transfer.ack.value;
-
-unlock_and_return:
- mutex_unlock(&mb5_transfer.lock);
- return r;
-}
-EXPORT_SYMBOL(prcmu_abb_read);
-
-/**
- * prcmu_abb_write() - Write register value(s) to the ABB.
- * @slave: The I2C slave address.
- * @reg: The (start) register address.
- * @value: The value(s) to write.
- * @size: The number of registers to write.
- *
- * Reads register value(s) from the ABB.
- * @size has to be 1 for the current firmware version.
- */
-int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
-{
- int r;
-
- if (size != 1)
- return -EINVAL;
-
- r = mutex_lock_interruptible(&mb5_transfer.lock);
- if (r)
- return r;
-
-
- while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
- cpu_relax();
-
- writeb(I2C_WRITE(slave), REQ_MB5_I2C_SLAVE_OP);
- writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS);
- writeb(reg, REQ_MB5_I2C_REG);
- writeb(*value, REQ_MB5_I2C_VAL);
-
- writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
- if (!wait_for_completion_timeout(&mb5_transfer.work,
- msecs_to_jiffies(500))) {
- pr_err("prcmu: prcmu_abb_write timed out.\n");
- r = -EIO;
- goto unlock_and_return;
- }
- r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO);
-
-unlock_and_return:
- mutex_unlock(&mb5_transfer.lock);
- return r;
-}
-EXPORT_SYMBOL(prcmu_abb_write);
-
-static int set_ape_cpu_opps(u8 header, enum prcmu_ape_opp ape_opp,
- enum prcmu_cpu_opp cpu_opp)
-{
- bool do_ape;
- bool do_arm;
- int err = 0;
-
- do_ape = ((header == MB1H_APE_OPP) || (header == MB1H_ARM_APE_OPP));
- do_arm = ((header == MB1H_ARM_OPP) || (header == MB1H_ARM_APE_OPP));
-
- mutex_lock(&mb1_transfer.lock);
-
- while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
- cpu_relax();
-
- writeb(0, MBOX_HEADER_REQ_MB0);
- writeb(cpu_opp, REQ_MB1_ARMOPP);
- writeb(ape_opp, REQ_MB1_APEOPP);
- writeb(0, REQ_MB1_BOOSTOPP);
- writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
- wait_for_completion(&mb1_transfer.work);
- if ((do_ape) && (mb1_transfer.ack.ape_status != 0))
- err = -EIO;
- if ((do_arm) && (mb1_transfer.ack.arm_status != 0))
- err = -EIO;
-
- mutex_unlock(&mb1_transfer.lock);
-
- return err;
-}
-
-/**
- * prcmu_set_ape_opp() - Set the OPP of the APE.
- * @opp: The OPP to set.
- *
- * This function sets the OPP of the APE.
- */
-int prcmu_set_ape_opp(enum prcmu_ape_opp opp)
-{
- return set_ape_cpu_opps(MB1H_APE_OPP, opp, APE_OPP_NO_CHANGE);
-}
-EXPORT_SYMBOL(prcmu_set_ape_opp);
-
-/**
- * prcmu_set_cpu_opp() - Set the OPP of the CPU.
- * @opp: The OPP to set.
- *
- * This function sets the OPP of the CPU.
- */
-int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp)
-{
- return set_ape_cpu_opps(MB1H_ARM_OPP, CPU_OPP_NO_CHANGE, opp);
-}
-EXPORT_SYMBOL(prcmu_set_cpu_opp);
-
-/**
- * prcmu_set_ape_cpu_opps() - Set the OPPs of the APE and the CPU.
- * @ape_opp: The APE OPP to set.
- * @cpu_opp: The CPU OPP to set.
- *
- * This function sets the OPPs of the APE and the CPU.
- */
-int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp,
- enum prcmu_cpu_opp cpu_opp)
-{
- return set_ape_cpu_opps(MB1H_ARM_APE_OPP, ape_opp, cpu_opp);
-}
-EXPORT_SYMBOL(prcmu_set_ape_cpu_opps);
-
-/**
- * prcmu_get_ape_opp() - Get the OPP of the APE.
- *
- * This function gets the OPP of the APE.
- */
-enum prcmu_ape_opp prcmu_get_ape_opp(void)
-{
- return readb(ACK_MB1_CURR_APEOPP);
-}
-EXPORT_SYMBOL(prcmu_get_ape_opp);
-
-/**
- * prcmu_get_cpu_opp() - Get the OPP of the CPU.
- *
- * This function gets the OPP of the CPU. The OPP is specified in %%.
- * PRCMU_OPP_EXT is a special OPP value, not specified in %%.
- */
-int prcmu_get_cpu_opp(void)
-{
- return readb(ACK_MB1_CURR_ARMOPP);
-}
-EXPORT_SYMBOL(prcmu_get_cpu_opp);
-
-bool prcmu_has_arm_maxopp(void)
-{
- return (readb(PRCM_AVS_VARM_MAX_OPP) & PRCM_AVS_ISMODEENABLE_MASK)
- == PRCM_AVS_ISMODEENABLE_MASK;
-}
-
-static void read_mailbox_0(void)
-{
- writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR);
-}
-
-static void read_mailbox_1(void)
-{
- mb1_transfer.ack.arm_opp = readb(ACK_MB1_CURR_ARMOPP);
- mb1_transfer.ack.ape_opp = readb(ACK_MB1_CURR_APEOPP);
- complete(&mb1_transfer.work);
- writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR);
-}
-
-static void read_mailbox_2(void)
-{
- writel(MBOX_BIT(2), PRCM_ARM_IT1_CLEAR);
-}
-
-static void read_mailbox_3(void)
-{
- writel(MBOX_BIT(3), PRCM_ARM_IT1_CLEAR);
-}
-
-static void read_mailbox_4(void)
-{
- writel(MBOX_BIT(4), PRCM_ARM_IT1_CLEAR);
-}
-
-static void read_mailbox_5(void)
-{
- mb5_transfer.ack.status = readb(ACK_MB5_I2C_STATUS);
- mb5_transfer.ack.value = readb(ACK_MB5_I2C_VAL);
- complete(&mb5_transfer.work);
- writel(MBOX_BIT(5), PRCM_ARM_IT1_CLEAR);
-}
-
-static void read_mailbox_6(void)
-{
- writel(MBOX_BIT(6), PRCM_ARM_IT1_CLEAR);
-}
-
-static void read_mailbox_7(void)
-{
- writel(MBOX_BIT(7), PRCM_ARM_IT1_CLEAR);
-}
-
-static void (* const read_mailbox[NUM_MBOX])(void) = {
- read_mailbox_0,
- read_mailbox_1,
- read_mailbox_2,
- read_mailbox_3,
- read_mailbox_4,
- read_mailbox_5,
- read_mailbox_6,
- read_mailbox_7
-};
-
-static irqreturn_t prcmu_irq_handler(int irq, void *data)
-{
- u32 bits;
- u8 n;
-
- bits = (readl(PRCM_ARM_IT1_VAL) & (MBOX_BIT(NUM_MBOX) - 1));
- if (unlikely(!bits))
- return IRQ_NONE;
-
- for (n = 0; bits; n++) {
- if (bits & MBOX_BIT(n)) {
- bits -= MBOX_BIT(n);
- read_mailbox[n]();
- }
- }
- return IRQ_HANDLED;
-}
-
-void __init prcmu_early_init(void)
-{
- if (cpu_is_u8500v11() || cpu_is_u8500ed()) {
- tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE_V1);
- } else if (cpu_is_u8500v2()) {
- tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE);
- } else {
- pr_err("prcmu: Unsupported chip version\n");
- BUG();
- }
-}
-
-static int __init prcmu_init(void)
-{
- if (cpu_is_u8500ed()) {
- pr_err("prcmu: Unsupported chip version\n");
- return 0;
- }
-
- mutex_init(&mb1_transfer.lock);
- init_completion(&mb1_transfer.work);
- mutex_init(&mb5_transfer.lock);
- init_completion(&mb5_transfer.work);
-
- /* Clean up the mailbox interrupts after pre-kernel code. */
- writel((MBOX_BIT(NUM_MBOX) - 1), PRCM_ARM_IT1_CLEAR);
-
- return request_irq(IRQ_DB8500_PRCMU1, prcmu_irq_handler, 0,
- "prcmu", NULL);
-}
-
-arch_initcall(prcmu_init);
--
1.7.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/