Re: [linux-pm] pm loss development

[mark gross]

On Wed, May 18, 2011 at 09:43:13PM +0200, Rafael J. Wysocki wrote:
> On Wednesday, May 18, 2011, mark gross wrote:
> > On Wed, May 18, 2011 at 01:07:57AM +0200, Rafael J. Wysocki wrote:
> > > On Saturday, May 14, 2011, mark gross wrote:
> > > > On Fri, May 13, 2011 at 06:54:57PM +0200, Rafael J. Wysocki wrote:
> > > > > On Friday, May 13, 2011, Raffaele Recalcati wrote:
> > > > > > Hi Rafael,
> > > > > > 
> > > > > > 2011/5/12 Rafael J. Wysocki <rjw@xxxxxxx>:
> > > > > > > On Thursday, May 12, 2011, Raffaele Recalcati wrote:
> > > > > > >> What happen normally in runtime pm implementation is that every devices
> > > > > > >> are switched off and are enabled only when needed.
> > > > > > >> In our case instead we have a completely functional embedded system and,
> > > > > > >> when an asyncrhonous event appear, we have only some tens milliseconds
> > > > > > >> before the actual power failure takes place.
> > > > > > >> This patchset add a support in order to switch off not vital part of the system,
> > > > > > >> in order to allow the board to survive longer.
> > > > > > >> This allow the possibility to save important data.
> > > > > > >
> > > > > > > OK, so first, who decides what parts of the system are vital and what aren't?
> > > > > > 
> > > > > > Take a quick look at Documentation/power/loss.txt  paragrpah "2.4
> > > > > > Power loss policies".
> > > > > > You can decide what can be powered off.
> > > > > 
> > > > > I read the patches.  My question was about the general idea of who should
> > > > > be responsible of making these decisions.
> > > > 
> > > > I would expect the system integrator would based on the application the
> > > > device is getting deployed into.
> > > > 
> > > > A generic opportunistic policy for peripherals that are stateless and can
> > > > be trivially power gated off/on from an ISR could be a default but, for
> > > > peripherals that need to do some processing (like waiting on an eMMC DMA
> > > > to complete) can take time to power down into a safe state.
> > > 
> > > What do you mean by safe state?
> > >
> > I need to get more details on this but I assume its a state where the
> > meta data of the file system is committed to the emmc before lights go
> > off such that when power is reapplied that the damage isn't too big. 
> 
> I don't think you can guarantee that the metadata won't be damaged
> without notifying the filesystem of the event (and making it react
> appropriately).
> 
true.  I'm just brain storming what infrastructure would be needed to
support such a feature.

> > I've also heard some talk of sim card corruption risks but, I don't have
> > first hand info on that.
> 
> Well, I guess that might be prevented by the driver alone.
Only the radio has a direct interface to the sim.  (pretty sure anyway)
so this would transfer into some AT commands pushed to the modem.

--mark
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/