Re: [PATCHv2 1/2] amba pl011: workaround for uart registers lockup

[Greg KH]

On Tue, May 17, 2011 at 10:50:17AM +0530, Shreshtha Kumar SAHU wrote:
> From: Shreshtha Kumar Sahu <shreshthakumar.sahu@xxxxxxxxxxxxxx>
> 
> This workaround aims to break the deadlock situation
> which raises during continuous transfer of data for long
> duration over uart with hardware flow control. It is
> observed that CTS interrupt cannot be cleared in uart
> interrupt register (ICR). Hence further transfer over
> uart gets blocked.
> 
> It is seen that during such deadlock condition ICR
> don't get cleared even on multiple write. This leads
> pass_counter to decrease and finally reach zero. This
> can be taken as trigger point to run this UART_BT_WA.
> 
> Workaround backups the register configuration, does soft
> reset of UART using BIT-0 of PRCC_K_SOFTRST_SET/CLEAR
> registers and restores the registers.
> 
> This patch also provides support for uart init and exit
> function calls if present.

Why?  You don't use these callbacks in this driver, so why add them?

confused,

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/