Re: [PATCH v6 4/6] video, sm501: add OF binding to support SM501

[Grant Likely]

On Tue, Mar 22, 2011 at 09:27:30AM +0100, Heiko Schocher wrote:
> - add binding to OF, compatible name "smi,sm501"
> 
> Signed-off-by: Heiko Schocher <hs@xxxxxxx>
> Acked-by: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>

Merged, thanks.

g.

> cc: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
> cc: Grant Likely <grant.likely@xxxxxxxxxxxx>
> cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
> cc: linux-fbdev@xxxxxxxxxxxxxxx
> cc: devicetree-discuss@xxxxxxxxxx
> cc: Ben Dooks <ben@xxxxxxxxxxxx>
> cc: Vincent Sanders <vince@xxxxxxxxxxxx>
> cc: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
> cc: linux-kernel@xxxxxxxxxxxxxxx
> cc: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
> cc: Wolfgang Denk <wd@xxxxxxx>
> cc: Paul Mundt <lethal@xxxxxxxxxxxx>
> ---
> - changes since v1:
>   add Ben Dooks, Vincent Sanders and Samuel Ortiz to cc, as suggested from
>   Paul Mundt.
> - changes since v2:
>   add comments from Randy Dunlap:
>   - move parameter documentation to Documentation/fb/sm501.txt
> - changes since v3:
>   - rebased against v2.6.38-rc2
>   - split in 3 patches
>     - of support patch
>       - get rid of "#if defined(CONFIG_PPC_MPC52xx)" usage
>         hide this in DTS, as Paul suggested.
>     - i/o routine patch
>     - edid support patch
> - changes since v4
>   replace remaining CONFIG_PPC_MPC52xx with CONFIG_OF, as
>   it is no longer MPC52xx only.
> - changes since v5
>   free edid_data after its usage, as it is no longer needed,
>   suggested from Paul Mundt. Also fall back to default if
>   kmemdup(edid_data) fails.
> - changes for v6:
>   - repost complete patchserie
>   - rebased against current head
> 
>  Documentation/powerpc/dts-bindings/sm501.txt |   34 +++++++++++++++++++++++++
>  drivers/mfd/sm501.c                          |    8 +++++-
>  drivers/video/sm501fb.c                      |   35 +++++++++++++++++++++++++-
>  3 files changed, 75 insertions(+), 2 deletions(-)
>  create mode 100644 Documentation/powerpc/dts-bindings/sm501.txt
> 
> diff --git a/Documentation/powerpc/dts-bindings/sm501.txt b/Documentation/powerpc/dts-bindings/sm501.txt
> new file mode 100644
> index 0000000..7d319fb
> --- /dev/null
> +++ b/Documentation/powerpc/dts-bindings/sm501.txt
> @@ -0,0 +1,34 @@
> +* SM SM501
> +
> +The SM SM501 is a LCD controller, with proper hardware, it can also
> +drive DVI monitors.
> +
> +Required properties:
> +- compatible : should be "smi,sm501".
> +- reg : contain two entries:
> +    - First entry: System Configuration register
> +    - Second entry: IO space (Display Controller register)
> +- interrupts : SMI interrupt to the cpu should be described here.
> +- interrupt-parent : the phandle for the interrupt controller that
> +  services interrupts for this device.
> +
> +Optional properties:
> +- mode : select a video mode:
> +    <xres>x<yres>[-<bpp>][@<refresh>]
> +- edid : verbatim EDID data block describing attached display.
> +  Data from the detailed timing descriptor will be used to
> +  program the display controller.
> +- little-endian: availiable on big endian systems, to
> +  set different foreign endian.
> +- big-endian: availiable on little endian systems, to
> +  set different foreign endian.
> +
> +Example for MPC5200:
> +	display@1,0 {
> +		compatible = "smi,sm501";
> +		reg = <1 0x00000000 0x00800000
> +		       1 0x03e00000 0x00200000>;
> +		interrupts = <1 1 3>;
> +		mode = "640x480-32@60";
> +		edid = [edid-data];
> +	};
> diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
> index 558d5f3..574f696 100644
> --- a/drivers/mfd/sm501.c
> +++ b/drivers/mfd/sm501.c
> @@ -1377,7 +1377,7 @@ static int __devinit sm501_init_dev(struct sm501_devdata *sm)
>  			sm501_register_gpio(sm);
>  	}
>  
> -	if (pdata->gpio_i2c != NULL && pdata->gpio_i2c_nr > 0) {
> +	if (pdata && pdata->gpio_i2c != NULL && pdata->gpio_i2c_nr > 0) {
>  		if (!sm501_gpio_isregistered(sm))
>  			dev_err(sm->dev, "no gpio available for i2c gpio.\n");
>  		else
> @@ -1735,10 +1735,16 @@ static struct pci_driver sm501_pci_driver = {
>  
>  MODULE_ALIAS("platform:sm501");
>  
> +static struct of_device_id __devinitdata of_sm501_match_tbl[] = {
> +	{ .compatible = "smi,sm501", },
> +	{ /* end */ }
> +};
> +
>  static struct platform_driver sm501_plat_driver = {
>  	.driver		= {
>  		.name	= "sm501",
>  		.owner	= THIS_MODULE,
> +		.of_match_table = of_sm501_match_tbl,
>  	},
>  	.probe		= sm501_plat_probe,
>  	.remove		= sm501_plat_remove,
> diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
> index f31252c..f275385 100644
> --- a/drivers/video/sm501fb.c
> +++ b/drivers/video/sm501fb.c
> @@ -1729,6 +1729,15 @@ static int sm501fb_init_fb(struct fb_info *fb,
>  		FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT |
>  		FBINFO_HWACCEL_XPAN | FBINFO_HWACCEL_YPAN;
>  
> +#if defined(CONFIG_OF)
> +#ifdef __BIG_ENDIAN
> +	if (of_get_property(info->dev->parent->of_node, "little-endian", NULL))
> +		fb->flags |= FBINFO_FOREIGN_ENDIAN;
> +#else
> +	if (of_get_property(info->dev->parent->of_node, "big-endian", NULL))
> +		fb->flags |= FBINFO_FOREIGN_ENDIAN;
> +#endif
> +#endif
>  	/* fixed data */
>  
>  	fb->fix.type		= FB_TYPE_PACKED_PIXELS;
> @@ -1933,8 +1942,32 @@ static int __devinit sm501fb_probe(struct platform_device *pdev)
>  	}
>  
>  	if (info->pdata == NULL) {
> -		dev_info(dev, "using default configuration data\n");
> +		int found = 0;
> +#if defined(CONFIG_OF)
> +		struct device_node *np = pdev->dev.parent->of_node;
> +		const u8 *prop;
> +		const char *cp;
> +		int len;
> +
>  		info->pdata = &sm501fb_def_pdata;
> +		if (np) {
> +			/* Get EDID */
> +			cp = of_get_property(np, "mode", &len);
> +			if (cp)
> +				strcpy(fb_mode, cp);
> +			prop = of_get_property(np, "edid", &len);
> +			if (prop && len == EDID_LENGTH) {
> +				info->edid_data = kmemdup(prop, EDID_LENGTH,
> +							  GFP_KERNEL);
> +				if (info->edid_data)
> +					found = 1;
> +			}
> +		}
> +#endif
> +		if (!found) {
> +			dev_info(dev, "using default configuration data\n");
> +			info->pdata = &sm501fb_def_pdata;
> +		}
>  	}
>  
>  	/* probe for the presence of each panel */
> -- 
> 1.7.4
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/