Re: 2.6.39-rc5-git2 boot crashs
From: werner
Date: Mon May 02 2011 - 18:12:06 EST
I disabled now CONFIG_IDE , CONFIG-X86_ELAN ,
CONFIG_X86_EXTENDED-PATFORM . Alias, moorestown I enabled
since 2.6.37 because it gave big problems on my computer
too.
On the other hand, I re-enabled CONFIG_MTD and
CONFIG-MISC_FILESYSTEMS , what I disabled yesterday.
On booting, it came back the non-crash error reported
earlier, see the enclosed syslog. Thus, this may be
caused by MTS oMISC_FILESYSTEMS.
The unzip problem now didn't occure, I could unzip a 140
MB and a 460 MB file without it crashed.
Actually it works stable? I have to continue to observe
what happens.
wl
1 enclosed file, syslog
=======================================================================
On Mon, 2 May 2011 08:17:58 -0700
Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx> wrote:
On Sun, May 1, 2011 at 11:54 PM, werner
<w.landgraf@xxxxx> wrote:
Then I gone back almost to my normal / everythingyes
config, but I disabled
CONFIG_MSC_FILESYSTEMS and CONFIG-MTD , also ACPI-APEI
because it needs
PSTORE of the 1st one.
Ok, good.
With them disabled: The 1st booting in grafic mode was
normally. I also
could unzip a 120 MB file (what before with the
everythingyes config
crashed). However, if I tried to unzip an appr. 500 MB
file, it crashed.
So that didn't help. Let's disable some other things
too.
Start off by disabling CONFIG_IDE, because you don't
need it and maybe
it does stomp on the SATA stuff somehow (on your
computer, you
_should_ be using just SATA_NV, I think).
But I also notice that you have enabled the X86
"extended platform"
support, and in particular CONFIG_X86_ELAN, and that
will disable all
the normal CPU logic. So please turn off
CONFIG_X86_EXTENDED_PLATFORM
too, and use the "normal" x86 support.
Turn off CONFIG_EISA and CONFIG_MCA too, in order to
limit things a bit.
Let's see if that makes any difference.
Linus
"werner" <w.landgraf@xxxxx>
---
Professional hosting for everyone - http://www.host.ru
May 2 17:57:33 werner kernel: Malformed early option 'acpi'
May 2 17:57:33 werner kernel: ACPI: RSDP 000fb9f0 00024 (v02 ACPIAM)
May 2 17:57:33 werner kernel: ACPI: XSDT affc0100 0004C (v01 A_M_I_ OEMXSDT 01000715 MSFT 00000097)
May 2 17:57:33 werner kernel: ACPI: FACP affc0290 000F4 (v03 A_M_I_ OEMFACP 01000715 MSFT 00000097)
May 2 17:57:33 werner kernel: ACPI: DSDT affc0440 04DAE (v01 A0647 A0647000 00000000 INTL 02002026)
May 2 17:57:33 werner kernel: ACPI: FACS affce000 00040
May 2 17:57:33 werner kernel: ACPI: APIC affc0390 00070 (v01 A_M_I_ OEMAPIC 01000715 MSFT 00000097)
May 2 17:57:33 werner kernel: ACPI: MCFG affc0400 0003C (v01 A_M_I_ OEMMCFG 01000715 MSFT 00000097)
May 2 17:57:33 werner kernel: ACPI: OEMB affce040 00060 (v01 A_M_I_ AMI_OEM 01000715 MSFT 00000097)
May 2 17:57:33 werner kernel: ACPI: HPET affc51f0 00038 (v01 A_M_I_ OEMHPET0 01000715 MSFT 00000097)
May 2 17:57:33 werner kernel: Zone PFN ranges:
May 2 17:57:33 werner kernel: DMA 0x00000010 -> 0x00001000
May 2 17:57:33 werner kernel: Normal 0x00001000 -> 0x000377fe
May 2 17:57:33 werner kernel: HighMem 0x000377fe -> 0x000affc0
May 2 17:57:33 werner kernel: Movable zone start PFN for each node
May 2 17:57:33 werner kernel: early_node_map[2] active PFN ranges
May 2 17:57:33 werner kernel: 0: 0x00000010 -> 0x0000009f
May 2 17:57:33 werner kernel: 0: 0x00000100 -> 0x000affc0
May 2 17:57:33 werner kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 715087
May 2 17:57:33 werner kernel: Fast TSC calibration using PIT
May 2 17:57:33 werner kernel: Detected 2410.823 MHz processor.
May 2 17:57:33 werner kernel: ACPI: setting ELCR to 0200 (from 8c00)
May 2 17:57:33 werner kernel: AMD PMU driver.
May 2 17:57:33 werner kernel: raid6: int32x1 621 MB/s
May 2 17:57:33 werner kernel: raid6: int32x2 1003 MB/s
May 2 17:57:33 werner kernel: raid6: int32x4 746 MB/s
May 2 17:57:33 werner kernel: raid6: int32x8 589 MB/s
May 2 17:57:33 werner kernel: raid6: mmxx1 1914 MB/s
May 2 17:57:33 werner kernel: raid6: mmxx2 3226 MB/s
May 2 17:57:33 werner kernel: raid6: sse1x1 1871 MB/s
May 2 17:57:33 werner kernel: raid6: sse1x2 3136 MB/s
May 2 17:57:33 werner kernel: raid6: sse2x1 3187 MB/s
May 2 17:57:33 werner kernel: raid6: sse2x2 4265 MB/s
May 2 17:57:33 werner kernel: raid6: using algorithm sse2x2 (4265 MB/s)
May 2 17:57:33 werner kernel: ACPI: Executed 1 blocks of module-level executable AML code
May 2 17:57:33 werner kernel: mdacon: MDA with 8K of memory detected.
May 2 17:57:33 werner kernel: microcode: CPU0: family 15 not supported
May 2 17:57:33 werner kernel: The force parameter has not been set to 1 so the Iris poweroff handler will not be installed.
May 2 17:57:33 werner kernel: highmem bounce pool size: 64 pages
May 2 17:57:33 werner kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
May 2 17:57:33 werner kernel: DLM (built May 2 2011 14:36:48) installed
May 2 17:57:33 werner kernel: EFS: 1.0a - http://aeschi.ch.eu.org/efs/
May 2 17:57:33 werner kernel: OCFS2 User DLM kernel interface loaded
May 2 17:57:33 werner kernel: GFS2 (built May 2 2011 14:38:12) installed
May 2 17:57:33 werner kernel: acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
May 2 17:57:33 werner kernel: ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 11
May 2 17:57:33 werner kernel: nvidiafb: CRTC0 analog found
May 2 17:57:33 werner kernel: nvidiafb: CRTC1 analog not found
May 2 17:57:33 werner kernel: i2c i2c-0: unable to read EDID block.
May 2 17:57:33 werner last message repeated 2 times
May 2 17:57:33 werner kernel: nvidiafb: EDID found from BUS2
May 2 17:57:33 werner kernel: nvidiafb: CRTC 0 appears to have a CRT attached
May 2 17:57:33 werner kernel: nvidiafb: Using CRT on CRTC 0
May 2 17:57:33 werner kernel: Could not find Carillo Ranch MCH device.
May 2 17:57:33 werner kernel: no IO addresses supplied
May 2 17:57:33 werner kernel: hgafb: probe of hgafb.0 failed with error -22
May 2 17:57:33 werner kernel: uvesafb: failed to execute /sbin/v86d
May 2 17:57:33 werner kernel: uvesafb: make sure that the v86d helper is installed and executable
May 2 17:57:33 werner kernel: uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
May 2 17:57:33 werner kernel: uvesafb: vbe_init() failed with -22
May 2 17:57:33 werner kernel: uvesafb: probe of uvesafb.0 failed with error -22
May 2 17:57:33 werner kernel: vesafb: cannot reserve video memory at 0xc0000000
May 2 17:57:33 werner kernel: toshiba: not a supported Toshiba laptop
May 2 17:57:33 werner kernel: Compaq SMART2 Driver (v 2.6.0)
May 2 17:57:33 werner kernel: i2c-core: driver [isl29003] using legacy suspend method
May 2 17:57:33 werner kernel: i2c-core: driver [isl29003] using legacy resume method
May 2 17:57:33 werner kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5go
May 2 17:57:33 werner kernel: scsi: <fdomain> Detection failed (no card)
May 2 17:57:33 werner kernel: NCR53c406a: no available ports found
May 2 17:57:33 werner kernel: Emulex LightPulse Fibre Channel SCSI driver 8.3.22
May 2 17:57:33 werner kernel: Copyright(c) 2004-2009 Emulex. All rights reserved.
May 2 17:57:33 werner kernel: Failed initialization of WD-7000 SCSI card!
May 2 17:57:33 werner kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.05
May 2 17:57:33 werner kernel: 3ware Storage Controller device driver for Linux v1.26.02.003.
May 2 17:57:33 werner kernel: 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
May 2 17:57:33 werner kernel: imm: Version 2.05 (for Linux 2.4.0)
May 2 17:57:33 werner kernel: ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 15
May 2 17:57:33 werner kernel: mtdoops: mtd device (mtddev=name/number) must be supplied
May 2 17:57:33 werner kernel: physmap-flash.0: failed to claim resource 0
May 2 17:57:33 werner kernel: Failed to ioremap_nocache
May 2 17:57:33 werner last message repeated 2 times
May 2 17:57:33 werner kernel: SNAPGEAR: failed to ioremap() BOOTCS
May 2 17:57:33 werner kernel: Generic platform RAM MTD, (c) 2004 Simtec Electronics
May 2 17:57:33 werner kernel: [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
May 2 17:57:33 werner last message repeated 5 times
May 2 17:57:33 werner kernel: flash size: 8 MiB
May 2 17:57:33 werner kernel: page size: 512 bytes
May 2 17:57:33 werner kernel: OOB area size: 16 bytes
May 2 17:57:33 werner kernel: sector size: 8 KiB
May 2 17:57:33 werner kernel: pages number: 16384
May 2 17:57:33 werner kernel: pages per sector: 16
May 2 17:57:33 werner kernel: bus width: 8
May 2 17:57:33 werner kernel: bits in sector size: 13
May 2 17:57:33 werner kernel: bits in page size: 9
May 2 17:57:33 werner kernel: bits in OOB size: 4
May 2 17:57:33 werner kernel: flash size with OOB: 8448 KiB
May 2 17:57:33 werner kernel: page address bytes: 3
May 2 17:57:33 werner kernel: sector address bytes: 2
May 2 17:57:33 werner kernel: options: 0x62
May 2 17:57:33 werner kernel: onenand_wait: timeout! ctrl=0x0000 intr=0x0000
May 2 17:57:33 werner kernel: DE600: port 0x378 busy
May 2 17:57:33 werner kernel: paride: aten registered as protocol 0
May 2 17:57:33 werner kernel: paride: bpck registered as protocol 1
May 2 17:57:33 werner kernel: paride: comm registered as protocol 2
May 2 17:57:33 werner kernel: paride: dstr registered as protocol 3
May 2 17:57:33 werner kernel: paride: k951 registered as protocol 4
May 2 17:57:33 werner kernel: paride: k971 registered as protocol 5
May 2 17:57:33 werner kernel: paride: epat registered as protocol 6
May 2 17:57:33 werner kernel: paride: epia registered as protocol 7
May 2 17:57:33 werner kernel: paride: frpw registered as protocol 8
May 2 17:57:33 werner kernel: paride: friq registered as protocol 9
May 2 17:57:33 werner kernel: paride: fit2 registered as protocol 10
May 2 17:57:33 werner kernel: paride: fit3 registered as protocol 11
May 2 17:57:33 werner kernel: paride: on20 registered as protocol 12
May 2 17:57:33 werner kernel: paride: on26 registered as protocol 13
May 2 17:57:33 werner kernel: paride: ktti registered as protocol 14
May 2 17:57:33 werner kernel: paride: bpck6 registered as protocol 15
May 2 17:57:33 werner kernel: pd: pd version 1.05, major 45, cluster 64, nice 0
May 2 17:57:33 werner kernel: pda: Autoprobe failed
May 2 17:57:33 werner kernel: pd: no valid drive found
May 2 17:57:33 werner kernel: pcd: pcd version 1.07, major 46, nice 0
May 2 17:57:33 werner kernel: pcd0: Autoprobe failed
May 2 17:57:33 werner kernel: pcd: No CD-ROM drive found
May 2 17:57:33 werner kernel: pf: pf version 1.04, major 47, cluster 64, nice 0
May 2 17:57:33 werner kernel: pf: No ATAPI disk detected
May 2 17:57:33 werner kernel: pt: pt version 1.04, major 96
May 2 17:57:33 werner kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
May 2 17:57:33 werner kernel: pt0: Autoprobe failed
May 2 17:57:33 werner kernel: pt: No ATAPI tape drive detected
May 2 17:57:33 werner kernel: pg: pg version 1.02, major 97
May 2 17:57:33 werner kernel: pga: Autoprobe failed
May 2 17:57:33 werner kernel: pg: No ATAPI device detected
May 2 17:57:33 werner kernel: ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
May 2 17:57:33 werner kernel: ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 11
May 2 17:57:33 werner kernel: GTCO usb driver version: 2.00.0006
May 2 17:57:33 werner kernel: mk712: device not present
May 2 17:57:33 werner kernel: wistron_btns: System unknown
May 2 17:57:33 werner kernel: EISA: Cannot allocate resource for mainboard
May 2 17:57:33 werner kernel: Cannot allocate resource for EISA slot 1
May 2 17:57:33 werner kernel: Cannot allocate resource for EISA slot 2
May 2 17:57:33 werner kernel: Cannot allocate resource for EISA slot 3
May 2 17:57:33 werner kernel: Cannot allocate resource for EISA slot 4
May 2 17:57:33 werner kernel: Cannot allocate resource for EISA slot 5
May 2 17:57:33 werner kernel: Cannot allocate resource for EISA slot 6
May 2 17:57:33 werner kernel: Cannot allocate resource for EISA slot 7
May 2 17:57:33 werner kernel: Cannot allocate resource for EISA slot 8
May 2 17:57:33 werner kernel: asus_wmi: Management GUID not found
May 2 17:57:33 werner kernel: asus_wmi: Management GUID not found
May 2 17:57:33 werner kernel: compal-laptop: Motherboard not recognized (You could try the module's force-parameter)
May 2 17:57:33 werner kernel: dell-wmi: No known WMI GUID found
May 2 17:57:33 werner kernel: dell_wmi_aio: No known WMI GUID found
May 2 17:57:33 werner kernel: acer_wmi: No or unsupported WMI interface, unable to load
May 2 17:57:33 werner kernel: acerhdf: unknown (unsupported) BIOS version System manufacturer/System Product Name/0413 , please report, aborting!
May 2 17:57:33 werner kernel: hdaps: supported laptop not found!
May 2 17:57:33 werner kernel: hdaps: driver init failed (ret=-19)!
May 2 17:57:33 werner kernel: This machine doesn't have MSI-hotkeys through WMI
May 2 17:57:33 werner kernel: [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
May 2 17:57:33 werner kernel: powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup
May 2 17:57:33 werner kernel: hd: no drives specified - use hd=cyl,head,sectors on kernel command line
May 2 17:57:33 werner kernel: usb 2-3: device descriptor read/64, error -62
May 2 17:57:33 werner last message repeated 3 times
May 2 17:57:33 werner kernel: usb 2-3: device not accepting address 4, error -62
May 2 17:57:33 werner kernel: usb 2-3: device not accepting address 5, error -62
May 2 17:57:33 werner kernel: hub 2-0:1.0: unable to enumerate USB device on port 3
May 2 17:57:33 werner kernel: udevd (2885): /proc/2885/oom_adj is deprecated, please use /proc/2885/oom_score_adj instead.
May 2 17:57:33 werner kernel: k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
May 2 17:57:33 werner kernel: ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 11
May 2 17:57:33 werner kernel: ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 11
May 2 17:57:33 werner kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
May 2 17:57:33 werner kernel: EXT3-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
May 2 17:57:33 werner kernel: rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.
May 2 17:57:33 werner kernel: EXT3-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended
May 2 17:57:33 werner kernel: REISERFS warning (device sda3): sh-2021 reiserfs_fill_super: can not find reiserfs on sda3
May 2 17:57:33 werner kernel: EXT2-fs (sda3): error: can't find an ext2 filesystem on dev sda3.
May 2 17:57:33 werner kernel: EXT4-fs (sda3): VFS: Can't find ext4 filesystem
May 2 17:57:33 werner kernel: cramfs: wrong magic
May 2 17:57:33 werner kernel: SQUASHFS error: Can't find a SQUASHFS superblock on sda3
May 2 17:57:33 werner kernel: VFS: Can't find a Minix filesystem V1 | V2 | V3 on device sda3.
May 2 17:57:33 werner kernel: FAT: invalid media value (0x75)
May 2 17:57:33 werner kernel: FAT: invalid media value (0x75)
May 2 17:57:33 werner kernel: BFS-fs: bfs_fill_super(): No BFS filesystem on sda3 (magic=458bc330)
May 2 17:57:33 werner kernel: ISOFS: Unable to identify CD-ROM format.
May 2 17:57:33 werner kernel: hfs: unable to find HFS+ superblock
May 2 17:57:33 werner kernel: hfs: can't find a HFS filesystem on dev sda3.
May 2 17:57:33 werner kernel: VFS: unable to find oldfs superblock on device sda3
May 2 17:57:33 werner kernel: VFS: could not find a valid V7 on sda3.
May 2 17:57:33 werner kernel: HPFS: Bad magic ... probably not HPFS
May 2 17:57:33 werner kernel: NTFS-fs warning (device sda3): is_boot_sector_ntfs(): Invalid boot sector checksum.
May 2 17:57:33 werner kernel: NTFS-fs error (device sda3): read_ntfs_boot_sector(): Primary boot sector is invalid.
May 2 17:57:33 werner kernel: NTFS-fs error (device sda3): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
May 2 17:57:33 werner kernel: NTFS-fs error (device sda3): ntfs_fill_super(): Not an NTFS volume.
May 2 17:57:33 werner kernel: You didn't specify the type of your ufs filesystem
May 2 17:57:33 werner kernel:
May 2 17:57:33 werner kernel: mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...
May 2 17:57:33 werner kernel:
May 2 17:57:33 werner kernel: >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
May 2 17:57:33 werner kernel: ufs_read_super: bad magic number
May 2 17:57:33 werner kernel: BUG: unable to handle kernel NULL pointer dereference at 00000004
May 2 17:57:33 werner kernel: IP: [<c12d00a3>] logfs_drop_inode+0x3c/0x68
May 2 17:57:33 werner kernel: *pde = 00000000
May 2 17:57:33 werner kernel: Oops: 0002 [#1] SMP
May 2 17:57:33 werner kernel: last sysfs file: /sys/devices/pci0000:00/0000:00:08.0/host2/target2:0:0/2:0:0:0/block/sda/dev
May 2 17:57:33 werner kernel: Modules linked in: snd_usb_audio snd_usbmidi_lib snd_rawmidi snd_seq_device rt2860sta(C) uvcvideo asus_atk0110 snd_hda_codec_realtek 8139too rtc_cmos snd_hda_intel rtc_core rtc_lib snd_hda_codec tpm_tis snd_hwdep tpm tpm_bios snd_pcm snd_timer snd soundcore atl1 k8temp snd_page_alloc i2c_nforce2
May 2 17:57:33 werner kernel:
May 2 17:57:33 werner kernel: Pid: 5592, comm: mount Tainted: G C 2.6.39-rc5-git4-i486-1sys #1 System manufacturer System Product Name/M2N8-VMX
May 2 17:57:33 werner kernel: EIP: 0060:[<c12d00a3>] EFLAGS: 00010246 CPU: 0
May 2 17:57:33 werner kernel: EIP is at logfs_drop_inode+0x3c/0x68
May 2 17:57:33 werner kernel: EAX: 00000000 EBX: f0716000 ECX: f07161f4 EDX: f07161f4
May 2 17:57:33 werner kernel: ESI: f5224000 EDI: f527ca00 EBP: ee017e68 ESP: ee017e60
May 2 17:57:33 werner kernel: DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
May 2 17:57:33 werner kernel: Process mount (pid: 5592, ti=ee016000 task=f56c6730 task.ti=ee016000)
May 2 17:57:33 werner kernel: Stack:
May 2 17:57:33 werner kernel: c1f07a8c f0716000 ee017e7c c10e9f9d ffffffea f527ca00 f67bd6c0 ee017eb8
May 2 17:57:33 werner kernel: c12d765a 00000000 00000000 c156de18 00000000 f5224000 00000400 f5224000
May 2 17:57:33 werner kernel: f67bd6a0 00000040 0000000a 00000000 f5286a20 f5286a20 ee017ef0 c10d9545
May 2 17:57:33 werner kernel: Call Trace:
May 2 17:57:33 werner kernel: [<c10e9f9d>] iput+0x5c/0x119
May 2 17:57:33 werner kernel: [<c12d765a>] logfs_mount+0x44f/0x5ca
May 2 17:57:33 werner kernel: [<c156de18>] ? ida_get_new_above+0x16c/0x186
May 2 17:57:33 werner kernel: [<c10d9545>] mount_fs+0x68/0x13e
May 2 17:57:33 werner kernel: [<c10b1727>] ? kstrdup+0x30/0x41
May 2 17:57:33 werner kernel: [<c10ee12b>] vfs_kern_mount+0x53/0x7f
May 2 17:57:33 werner kernel: [<c10ee1af>] do_kern_mount+0x3c/0xbb
May 2 17:57:33 werner kernel: [<c10ee84b>] do_mount+0x61d/0x669
May 2 17:57:33 werner kernel: [<c10ed433>] ? copy_mount_options+0xe/0xe6
May 2 17:57:33 werner kernel: [<c10b1659>] ? memdup_user+0x34/0x4b
May 2 17:57:33 werner kernel: [<c10b16a1>] ? strndup_user+0x31/0x42
May 2 17:57:33 werner kernel: [<c10ee904>] sys_mount+0x6d/0x99
May 2 17:57:33 werner kernel: [<c1e9e42c>] syscall_call+0x7/0xb
May 2 17:57:33 werner kernel: Code: 8c 01 00 00 b8 60 59 76 c2 e8 c9 df bc 00 8b 83 f8 01 00 00 8d 8b f4 01 00 00 8b 93 f4 01 00 00 89 42 04 89 10 8b 86 54 02 00 00
May 2 17:57:33 werner kernel: EIP: [<c12d00a3>] logfs_drop_inode+0x3c/0x68 SS:ESP 0068:ee017e60
May 2 17:57:33 werner kernel: CR2: 0000000000000004
May 2 17:57:33 werner kernel: ---[ end trace 2e5a561f55162e52 ]---
May 2 17:57:35 werner udevd-event[5659]: udev_rules_apply_format: unknown format variable '$modalias | grep -q eagle-usb || exit; while ! /sbin/eaglectrl -p 2>/dev/null | /bin/grep -q Post-firmware; do sleep 2; done; /sbin/eaglectrl -d''
May 2 17:57:35 werner udevd-event[5663]: udev_rules_apply_format: unknown format variable '$modalias | grep -q eagle-usb || exit; while ! /sbin/eaglectrl -p 2>/dev/null | /bin/grep -q Post-firmware; do sleep 2; done; /sbin/eaglectrl -d''
May 2 17:57:45 werner apcupsd[5637]: apcupsd FATAL ERROR in smartsetup.c at line 171 PANIC! Cannot communicate with UPS via serial port. Please make sure the port specified on the DEVICE directive is correct, and that your cable specification on the UPSCABLE directive is correct.
May 2 17:57:45 werner apcupsd[5637]: apcupsd error shutdown completed
May 2 17:57:57 werner udevd[2885]: add_to_rules: unknown key 'MODALIAS' in /etc/udev/rules.d/80-eagle-usb.rules:1
May 2 17:58:18 werner kdm_greet[6068]: Can't open default user face