[PATCH 0/4] davinci-mcasp: fix tdm_slots and CBM/CFS

[Ben Gardiner]

This patch series is comprised of three bugfixes and one cleanup that 
were performed during prototyping of McASP operation in codec clock-
master frame-slave mode.

First we noticed that the check of the number of tdm slots requested
by platform data was always returning true -- unrelated to CMB/CFS
mode.

Then a cleanup: the PDIR values set are currently based on magic 
numbers and there are  available bitfield definitions. Not strictly
needed but it makes the changes introduced in the last patch simpler
to read.

It was found that the hardware parameters assigned when 
codec clock-master frame-slave is requested were incorrect. This
change is required for correct CBM/CFS operation.

Finally, the direction of the pins is corrected to reflect the
implications of codec clock-master frame-slave -- i.e. mcasp clock-
input frame-output. This change is also required for correct operation.

The combination was tested with a logic analyzer and the hrtimer pwm
device from Bill Gatliff's PWM framework [1] on a da850evm with
hardware modifications to access the McASP lines.

[1] http://article.gmane.org/gmane.linux.kernel.embedded/3486/

Ben Gardiner (4):
  davinci-mcasp: correct tdm_slots limit
  davinci-mcasp: use bitfield definitions for PDIR
  davinci-mcasp: fix _CBM_CFS hw_params
  davinci-mcasp: fix _CBM_CFS pin directions

 sound/soc/davinci/davinci-mcasp.c |   19 ++++++++++++-------
 1 files changed, 12 insertions(+), 7 deletions(-)

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/