Re: [patch v2] x86: allow ZONE_DMA to be configurable

[H. Peter Anvin]

On 04/15/2011 04:42 AM, Clemens Ladisch wrote:
> David Rientjes wrote:
>> ZONE_DMA is unnecessary for a large number of machines that do not
>> require addressing in the lower 16MB of memory because they do not use
>> ISA devices with 16-bit address registers (plus one page byte register).
>>
>> This patch allows users to disable ZONE_DMA for x86 if they know they
>> will not be using such devices with their kernel.
>> ...
>>  config ZONE_DMA
>> -	def_bool y
>> +	bool "DMA memory allocation support" if EXPERT
> 
> Better call it "ISA/LPC DMA memory allocation support".
> 
>> +	default y
> 
> Does it make sense to have this without CONFIG_ISA_DMA_API?
> 
>> +	help
>> +	  DMA memory allocation support allows old ISA devices with 16-bit
>> +	  address registers to allocate memory within the first 16MB of
>> +	  address space.  Disable if no such devices will be used.
> 
> "Old ISA devices" might be misleading because ISA does not imply actual
> ISA slots; please mention LPC devices like the floppy controller and the
> parallel port in ECP mode.
> 

This isn't really a very good edit, as ZONE_DMA isn't inherently limited
to ISA/LPC devices (and LPC devices which do LPC-native bus mastering
DMA are not affected.)  ZONE_DMA is used even for some PCI devices which
have restrictions on the DMA address mask.

	-hpa


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/