Re: sata_mv port lockup on hotplug (kernel 2.6.38.2)

[Mark Lord]

On 11-04-06 10:57 AM, Bruce Stenning wrote:
> Please accept my most humble apologies for the lack of line breaks in
> my previous email.  Here it is again, this time in a more readable
> format:
> 
> Hello,
> 
> We have a bespoke platform utilising a Marvell MV88SX6041 SATA controller
> on which we have been running Linux 2.6.26 and using the sata_mv driver.
> 
> We have noticed problems with SATA ports occasionally locking up (on
> hotplug events) and remaining unresponsive.  The normal kernel logging
> that occurs on hotplug events is no longer emitted for the locked ports
> (but will be emitted for the other sata ports that have not exhibited
> the problem.)  The disks attached to the locked ports are completely
> unresponsive.  The condition can be cleared by removing the sata_mv
> kernel module from memory and reloading it, after which the kernel
> logging becomes active (and the disks are usable) for all ports.
> 
> The following changeset was seen as a strong candidate for addressing
> this problem:
> 
> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=933cb8e5fcdebd4b666165e3f039f814d62b0e52


That changeset is already in upstream kernels (kernel.org).
Does the latest kernel (2.6.38) w/ sata_mv work ?
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/