OOPS ncpfs kernel version 2.6.38
From: Bongani Hlope
Date: Fri Apr 01 2011 - 00:55:17 EST
My early email was rejected by vger, because I only have access to my account
using a webmail client.
So here it is again.
After applying the 2.6.38 patch I cannot access ncpfs volumes any more.
ncpmount mounts the volume successfully, bus when I ether run ls or change to
the mount mount I get the following Oops:
ncpfs is version 2.2.6, my distro is Mandriva 2010.1
------------[ cut here ]------------
kernel BUG at
/home/bongani/development/c/kernel/linux-2.6.33/fs/dcache.c:2126!
invalid opcode: 0000 [#1] PREEMPT SMP
last sysfs file:
/sys/devices/pci0000:00/0000:00:1f.5/host2/target2:0:0/2:0:0:0/block/sdb/uevent
CPU 0
Modules linked in: ncpfs nls_iso8859_1 nls_cp437 vfat fat uas usb_storage fuse
vmnet vmblock vsock vmci vmmon af_packet ipv6 snd_hda_codec_hdmi
snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq_dummy
snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm sg
snd_timer snd_mixer_oss snd iTCO_wdt iTCO_vendor_support serio_raw sr_mod
soundcore snd_page_alloc r8169 mii i2c_i801 radeon ttm drm_kms_helper drm
i2c_algo_bit i2c_core binfmt_misc cpufreq_ondemand cpufreq_conservative
cpufreq_powersave acpi_cpufreq freq_table mperf nvram evdev button ppdev
parport_pc parport processor ide_generic pata_jmicron ide_pci_generic
ide_gd_mod ide_core pata_acpi ata_generic ahci libahci ata_piix libata sd_mod
scsi_mod crc_t10dif ext4 jbd2 crc16 uhci_hcd ohci_hcd ehci_hcd usbhid hid
usbcore
Pid: 12199, comm: bash Not tainted 2.6.38 #1 Gigabyte Technology Co., Ltd.
EG45M-UD2H/EG45M-UD2H
RIP: 0010:[] [] dentry_update_name_case+0x6c/0x80
RSP: 0018:ffff8801b5af99c8 EFLAGS: 00010246
RAX: 0000000000000001 RBX: ffff8801a81bd9c0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff8801b5af9a88 RDI: ffff8801a81bd9c0
RBP: ffff8801b5af99e8 R08: 0000000000000053 R09: ffff8801a81bd9f8
R10: 0000000000000000 R11: 0000000000000000 R12: ffff88010039c048
R13: ffff8801b5af9a88 R14: ffff8800b8d170c0 R15: ffff8801a81bd9c0
FS: 00007f74a48b9700(0000) GS:ffff8800bfc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007f74a3ff2360 CR3: 000000011075c000 CR4: 00000000000406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process bash (pid: 12199, threadinfo ffff8801b5af8000, task ffff8801bdf6e440)
Stack:
ffff88010039c048 ffff8801b5af9e58 ffff88010039c048 ffff8801b5af9c08
ffff8801b5af9bd8 ffffffffa05ef62f ffff8801b5af9a18 ffffffff8103e4f1
ffff8801b5af9a38 ffffffff8114a030 ffff8801b5af9f38 0000000000000000
Call Trace:
[] ncp_fill_cache+0x1df/0x5a0 [ncpfs]
[] ? get_parent_ip+0x11/0x50
[] ? filldir+0x0/0xd0
[] ? get_parent_ip+0x11/0x50
[] ? sub_preempt_count+0x9d/0xd0
[] ? _raw_spin_unlock_irqrestore+0x2c/0x60
[] ? ncp_do_request+0x2b0/0x3c0 [ncpfs]
[] ? autoremove_wake_function+0x0/0x40
[] ? autoremove_wake_function+0x0/0x40
[] ? ncp_request2+0x52/0x90 [ncpfs]
[] ncp_read_volume_list+0xe7/0x120 [ncpfs]
[] ? filldir+0x0/0xd0
[] ? find_lock_page+0x26/0x80
[] ? untrack_pfn_vma+0x0/0x70
[] ncp_readdir+0x310/0x750 [ncpfs]
[] ? filldir+0x0/0xd0
[] ? filldir+0x0/0xd0
[] vfs_readdir+0xb8/0xe0
[] sys_getdents+0x85/0xf0
[] ? page_fault+0x25/0x30
[] system_call_fastpath+0x16/0x1b
Code: 04 48 8b 7b 28 41 8b 55 04 49 8b 75 08 e8 cd 79 0b 00 ff 43 04 4c 89 e7
e8 22 5c 26 00 48 8b 5d e8 4c 8b 65 f0 4c 8b 6d f8 c9 c3 <0f> 0b eb fe 0f 0b
eb fe 66 66 66 2e 0f 1f 84 00 00 00 00 00 55
RIP [] dentry_update_name_case+0x6c/0x80
RSP
---[ end trace 08aa9ee28dc4838c ]---
decodecode < ncpfs-oops2.txt
Code: 04 48 8b 7b 28 41 8b 55 04 49 8b 75 08 e8 cd 79 0b 00 ff 43 04 4c 89 e7
e8 22 5c 26 00 48 8b 5d e8 4c 8b 65 f0 4c 8b 6d f8 c9 c3 <0f> 0b eb fe 0f 0b
eb fe 66 66 66 2e 0f 1f 84 00 00 00 00 00 55
All code
========
0: 04 48 add $0x48,%al
2: 8b 7b 28 mov 0x28(%rbx),%edi
5: 41 8b 55 04 mov 0x4(%r13),%edx
9: 49 8b 75 08 mov 0x8(%r13),%rsi
d: e8 cd 79 0b 00 callq 0xb79df
12: ff 43 04 incl 0x4(%rbx)
15: 4c 89 e7 mov %r12,%rdi
18: e8 22 5c 26 00 callq 0x265c3f
1d: 48 8b 5d e8 mov -0x18(%rbp),%rbx
21: 4c 8b 65 f0 mov -0x10(%rbp),%r12
25: 4c 8b 6d f8 mov -0x8(%rbp),%r13
29: c9 leaveq
2a: c3 retq
2b:* 0f 0b ud2a <-- trapping instruction
2d: eb fe jmp 0x2d
2f:* 0f 0b ud2a <-- trapping instruction
31: eb fe jmp 0x31
33: 66 66 66 2e 0f 1f 84 data32 data32 nopw %cs:0x0(%rax,%rax,1)
3a: 00 00 00 00 00
3f: 55 push %rbp
Code starting with the faulting instruction
===========================================
0: 0f 0b ud2a
2: eb fe jmp 0x2
4: 0f 0b ud2a
6: eb fe jmp 0x6
8: 66 66 66 2e 0f 1f 84 data32 data32 nopw %cs:0x0(%rax,%rax,1)
f: 00 00 00 00 00
14: 55 push %rbp
gdb gives me this:
(gdb) l *0xffffffff8114d19c
0xffffffff8114d19c is in dentry_update_name_case
(/home/bongani/development/c/kernel/linux-2.6.33/fs/dcache.c:2126).
2121 * Parent inode i_mutex must be held over d_lookup and into this call
(to
2122 * keep renames and concurrent inserts, and readdir(2) away).
2123 */
2124 void dentry_update_name_case(struct dentry *dentry, struct qstr *name)
2125 {
2126 BUG_ON(!mutex_is_locked(&dentry->d_inode->i_mutex));
2127 BUG_ON(dentry->d_name.len != name->len); /* d_lookup gives
this */
2128
2129 spin_lock(&dentry->d_lock);
2130 write_seqcount_begin(&dentry->d_seq);
./linux-2.6.33/scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux localhost 2.6.38 #1 SMP PREEMPT Wed Mar 16 13:57:13 SAST 2011 x86_64
x86_64 x86_64 GNU/Linux
Gnu C 4.4.3
Gnu make 3.81
binutils 2.20.51.0.7.20100318
util-linux ./linux-2.6.33/scripts/ver_linux: line 23: fdformat:
command not found
mount support
module-init-tools found
Linux C Library 2.11.1
Dynamic linker (ldd) 2.11.1
Procps 3.2.8
Kbd 1.15.2
Sh-utils 8.5
Modules Loaded ncpfs nls_iso8859_1 nls_cp437 vfat fat uas usb_storage
fuse vmnet vmblock vsock vmci vmmon af_packet ipv6 snd_hda_codec_hdmi
snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq_dummy
snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm sg
snd_timer snd_mixer_oss snd iTCO_wdt iTCO_vendor_support serio_raw sr_mod
soundcore snd_page_alloc r8169 mii i2c_i801 radeon ttm drm_kms_helper drm
i2c_algo_bit i2c_core binfmt_misc cpufreq_ondemand cpufreq_conservative
cpufreq_powersave acpi_cpufreq freq_table mperf nvram evdev button ppdev
parport_pc parport processor ide_generic pata_jmicron ide_pci_generic
ide_gd_mod ide_core pata_acpi ata_generic ahci libahci ata_piix libata sd_mod
scsi_mod crc_t10dif ext4 jbd2 crc16 uhci_hcd ohci_hcd ehci_hcd usbhid hid
usbcore
cat /proc/cpuinfo (trimed to display only the first core)
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz
stepping : 10
cpu MHz : 2667.000
cache size : 3072 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm
constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor
ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dts
tpr_shadow vnmi flexpriority
bogomips : 5332.75
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/