Re: [PATCH v3] ata: pata_at91.c bugfix for high master clock

[Igor Plyatov]

Hi!

Please abandon this patch and use its new version 4 with subjects:
* "[PATCH v4 1/2] ata: pata_at91.c bugfix for initial_timing
initialisation"
* "[PATCH v4 2/2] ata: pata_at91.c bugfix for high master clock"

Best regards!
--
Igor Plyatov

> The AT91SAM9 microcontrollers with master clock higher then 105 MHz
> and PIO0, have overflow of the NCS_RD_PULSE value in the MSB. This
> lead to "NCS_RD_PULSE" pulse longer then "NRD_CYCLE" pulse and driver
> does not detect ATA device.
> 
> Signed-off-by: Igor Plyatov <plyatov@xxxxxxxxx>
> ---
>  drivers/ata/pata_at91.c |    8 +++++++-
>  1 files changed, 7 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
> index d1aaeb5..3c2bf86 100644
> --- a/drivers/ata/pata_at91.c
> +++ b/drivers/ata/pata_at91.c
> @@ -33,11 +33,12 @@
>  
> 
>  #define DRV_NAME "pata_at91"
> -#define DRV_VERSION "0.1"
> +#define DRV_VERSION "0.2"
>  
>  #define CF_IDE_OFFSET	    0x00c00000
>  #define CF_ALT_IDE_OFFSET   0x00e00000
>  #define CF_IDE_RES_SIZE     0x08
> +#define NCS_RD_PULSE_LIMIT  0x3f /* maximal value for pulse bitfields */
>  
>  struct at91_ide_info {
>  	unsigned long mode;
> @@ -110,6 +111,11 @@ static void set_smc_timing(struct device *dev,
>  	/* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX) timings */
>  	ncs_read_setup = 1;
>  	ncs_read_pulse = read_cycle - 2;
> +	if (ncs_read_pulse > NCS_RD_PULSE_LIMIT) {
> +		ncs_read_pulse = NCS_RD_PULSE_LIMIT;
> +		dev_warn(dev, "ncs_read_pulse limited to maximal value %lu\n",
> +			ncs_read_pulse);
> +	}
>  
>  	/* Write timings same as read timings */
>  	write_cycle = read_cycle;


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/