[PATCH 1/1] m68k: merge m68k and m68knommu arch directories
From: gerg
Date: Tue Mar 22 2011 - 00:45:29 EST
From: Greg Ungerer <gerg@xxxxxxxxxxx>
There is a lot of common code that could be shared between the m68k
and m68knommu arch branches. It makes sense to merge the two branches
into a single directory structure so that we can more easily share
that common code.
This is a brute force merge, based on a script from Stephen King
<sfking@xxxxxxxxx>, which was originally written by Arnd Bergmann
<arnd@xxxxxxxx>.
> The script was inspired by the script Sam Ravnborg used to merge the
> includes from m68knommu. For those files common to both arches but
> differing in content, the m68k version of the file is renamed to
> <file>_mm.<ext> and the m68knommu version of the file is moved into the
> corresponding m68k directory and renamed <file>_no.<ext> and a small
> wrapper file <file>.<ext> is used to select between the two version. Files
> that are common to both but don't differ are removed from the m68knommu
> tree and files and directories that are unique to the m68knommu tree are
> moved to the m68k tree. Finally, the arch/m68knommu tree is removed.
>
> To select between the the versions of the files, the wrapper uses
>
> #ifdef CONFIG_MMU
> #include <file>_mm.<ext>
> #else
> #include <file>_no.<ext>
> #endif
On top of this file merge I have done a simplistic merge of m68k and
m68knommu Kconfig, which primarily attempts to keep existing options and
menus in place. Other than a handful of options being moved it produces
identical .config outputs on m68k and m68knommu targets I tested it on.
With this in place there is now quite a bit of scope for merge cleanups
in future patches.
Signed-off-by: Greg Ungerer <gerg@xxxxxxxxxxx>
---
arch/m68k/Kconfig | 886 ++++----------
arch/{m68knommu => m68k}/Kconfig.debug | 4 +
arch/m68k/{Kconfig => Kconfig.mmu} | 221 ----
arch/{m68knommu/Kconfig => m68k/Kconfig.nommu} | 94 --
arch/m68k/Makefile | 128 +--
arch/m68k/{Makefile => Makefile_mm} | 0
arch/{m68knommu/Makefile => m68k/Makefile_no} | 14 +-
.../{m68knommu => m68k}/configs/m5208evb_defconfig | 1 +
.../{m68knommu => m68k}/configs/m5249evb_defconfig | 1 +
arch/{m68knommu => m68k}/configs/m5272c3_defconfig | 1 +
.../{m68knommu => m68k}/configs/m5275evb_defconfig | 1 +
arch/{m68knommu => m68k}/configs/m5307c3_defconfig | 1 +
arch/{m68knommu => m68k}/configs/m5407c3_defconfig | 1 +
arch/m68k/kernel/Makefile | 18 +-
arch/m68k/kernel/Makefile_mm | 17 +
.../kernel/Makefile => m68k/kernel/Makefile_no} | 0
arch/m68k/kernel/asm-offsets.c | 105 +--
.../kernel/{asm-offsets.c => asm-offsets_mm.c} | 0
.../asm-offsets.c => m68k/kernel/asm-offsets_no.c} | 0
arch/m68k/kernel/dma.c | 135 +---
arch/m68k/kernel/{dma.c => dma_mm.c} | 0
.../kernel/dma.c => m68k/kernel/dma_no.c} | 0
arch/m68k/kernel/entry.S | 758 +------------
arch/m68k/kernel/{entry.S => entry_mm.S} | 0
.../kernel/entry.S => m68k/kernel/entry_no.S} | 0
arch/{m68knommu => m68k}/kernel/init_task.c | 0
arch/{m68knommu => m68k}/kernel/irq.c | 0
arch/m68k/kernel/m68k_ksyms.c | 21 +-
arch/m68k/kernel/{m68k_ksyms.c => m68k_ksyms_mm.c} | 0
.../m68k_ksyms.c => m68k/kernel/m68k_ksyms_no.c} | 0
arch/m68k/kernel/module.c | 160 +---
arch/m68k/kernel/{module.c => module_mm.c} | 0
.../kernel/module.c => m68k/kernel/module_no.c} | 0
arch/m68k/kernel/process.c | 359 +------
arch/m68k/kernel/{process.c => process_mm.c} | 0
.../kernel/process.c => m68k/kernel/process_no.c} | 0
arch/m68k/kernel/ptrace.c | 282 +-----
arch/m68k/kernel/{ptrace.c => ptrace_mm.c} | 0
.../kernel/ptrace.c => m68k/kernel/ptrace_no.c} | 0
arch/m68k/kernel/setup.c | 538 +---------
arch/m68k/kernel/{setup.c => setup_mm.c} | 0
.../kernel/setup.c => m68k/kernel/setup_no.c} | 0
arch/m68k/kernel/signal.c | 1022 +----------------
arch/m68k/kernel/{signal.c => signal_mm.c} | 0
.../kernel/signal.c => m68k/kernel/signal_no.c} | 0
arch/m68k/kernel/sys_m68k.c | 551 +---------
arch/m68k/kernel/{sys_m68k.c => sys_m68k_mm.c} | 0
.../sys_m68k.c => m68k/kernel/sys_m68k_no.c} | 0
arch/{m68knommu => m68k}/kernel/syscalltable.S | 0
arch/m68k/kernel/time.c | 119 +--
arch/m68k/kernel/{time.c => time_mm.c} | 0
.../kernel/time.c => m68k/kernel/time_no.c} | 0
arch/m68k/kernel/traps.c | 1212 +-------------------
arch/m68k/kernel/{traps.c => traps_mm.c} | 0
.../kernel/traps.c => m68k/kernel/traps_no.c} | 0
arch/m68k/kernel/vmlinux.lds.S | 11 +-
arch/m68k/kernel/vmlinux.lds_mm.S | 10 +
.../vmlinux.lds.S => m68k/kernel/vmlinux.lds_no.S} | 0
arch/m68k/lib/Makefile | 11 +-
arch/m68k/lib/Makefile_mm | 6 +
.../lib/Makefile => m68k/lib/Makefile_no} | 0
arch/m68k/lib/checksum.c | 430 +-------
arch/m68k/lib/{checksum.c => checksum_mm.c} | 0
.../lib/checksum.c => m68k/lib/checksum_no.c} | 0
arch/{m68knommu => m68k}/lib/delay.c | 0
arch/{m68knommu => m68k}/lib/divsi3.S | 0
arch/{m68knommu => m68k}/lib/memcpy.c | 0
arch/{m68knommu => m68k}/lib/memmove.c | 0
arch/{m68knommu => m68k}/lib/memset.c | 0
arch/{m68knommu => m68k}/lib/modsi3.S | 0
arch/m68k/lib/muldi3.c | 68 +-
arch/m68k/lib/{muldi3.c => muldi3_mm.c} | 0
.../lib/muldi3.c => m68k/lib/muldi3_no.c} | 0
arch/{m68knommu => m68k}/lib/mulsi3.S | 0
arch/{m68knommu => m68k}/lib/udivsi3.S | 0
arch/{m68knommu => m68k}/lib/umodsi3.S | 0
arch/m68k/mm/Makefile | 13 +-
arch/m68k/mm/Makefile_mm | 8 +
.../{m68knommu/mm/Makefile => m68k/mm/Makefile_no} | 0
arch/m68k/mm/init.c | 155 +---
arch/m68k/mm/{init.c => init_mm.c} | 0
arch/{m68knommu/mm/init.c => m68k/mm/init_no.c} | 0
arch/m68k/mm/kmap.c | 372 +------
arch/m68k/mm/{kmap.c => kmap_mm.c} | 0
arch/{m68knommu/mm/kmap.c => m68k/mm/kmap_no.c} | 0
arch/{m68knommu => m68k}/platform/5206/Makefile | 0
arch/{m68knommu => m68k}/platform/5206/config.c | 0
arch/{m68knommu => m68k}/platform/5206/gpio.c | 0
arch/{m68knommu => m68k}/platform/5206e/Makefile | 0
arch/{m68knommu => m68k}/platform/5206e/config.c | 0
arch/{m68knommu => m68k}/platform/5206e/gpio.c | 0
arch/{m68knommu => m68k}/platform/520x/Makefile | 0
arch/{m68knommu => m68k}/platform/520x/config.c | 0
arch/{m68knommu => m68k}/platform/520x/gpio.c | 0
arch/{m68knommu => m68k}/platform/523x/Makefile | 0
arch/{m68knommu => m68k}/platform/523x/config.c | 0
arch/{m68knommu => m68k}/platform/523x/gpio.c | 0
arch/{m68knommu => m68k}/platform/5249/Makefile | 0
arch/{m68knommu => m68k}/platform/5249/config.c | 0
arch/{m68knommu => m68k}/platform/5249/gpio.c | 0
arch/{m68knommu => m68k}/platform/5249/intc2.c | 0
arch/{m68knommu => m68k}/platform/5272/Makefile | 0
arch/{m68knommu => m68k}/platform/5272/config.c | 0
arch/{m68knommu => m68k}/platform/5272/gpio.c | 0
arch/{m68knommu => m68k}/platform/5272/intc.c | 0
arch/{m68knommu => m68k}/platform/527x/Makefile | 0
arch/{m68knommu => m68k}/platform/527x/config.c | 0
arch/{m68knommu => m68k}/platform/527x/gpio.c | 0
arch/{m68knommu => m68k}/platform/528x/Makefile | 0
arch/{m68knommu => m68k}/platform/528x/config.c | 0
arch/{m68knommu => m68k}/platform/528x/gpio.c | 0
arch/{m68knommu => m68k}/platform/5307/Makefile | 0
arch/{m68knommu => m68k}/platform/5307/config.c | 0
arch/{m68knommu => m68k}/platform/5307/gpio.c | 0
arch/{m68knommu => m68k}/platform/5307/nettel.c | 0
arch/{m68knommu => m68k}/platform/532x/Makefile | 0
arch/{m68knommu => m68k}/platform/532x/config.c | 0
arch/{m68knommu => m68k}/platform/532x/gpio.c | 0
arch/{m68knommu => m68k}/platform/5407/Makefile | 0
arch/{m68knommu => m68k}/platform/5407/config.c | 0
arch/{m68knommu => m68k}/platform/5407/gpio.c | 0
arch/{m68knommu => m68k}/platform/54xx/Makefile | 0
arch/{m68knommu => m68k}/platform/54xx/config.c | 0
arch/{m68knommu => m68k}/platform/54xx/firebee.c | 0
arch/{m68knommu => m68k}/platform/68328/Makefile | 0
arch/{m68knommu => m68k}/platform/68328/bootlogo.h | 0
.../{m68knommu => m68k}/platform/68328/bootlogo.pl | 0
arch/{m68knommu => m68k}/platform/68328/config.c | 0
arch/{m68knommu => m68k}/platform/68328/entry.S | 0
arch/{m68knommu => m68k}/platform/68328/head-de2.S | 0
.../platform/68328/head-pilot.S | 0
arch/{m68knommu => m68k}/platform/68328/head-ram.S | 0
arch/{m68knommu => m68k}/platform/68328/head-rom.S | 0
arch/{m68knommu => m68k}/platform/68328/ints.c | 0
arch/{m68knommu => m68k}/platform/68328/romvec.S | 0
arch/{m68knommu => m68k}/platform/68328/timers.c | 0
arch/{m68knommu => m68k}/platform/68360/Makefile | 0
arch/{m68knommu => m68k}/platform/68360/commproc.c | 0
arch/{m68knommu => m68k}/platform/68360/config.c | 0
arch/{m68knommu => m68k}/platform/68360/entry.S | 0
arch/{m68knommu => m68k}/platform/68360/head-ram.S | 0
arch/{m68knommu => m68k}/platform/68360/head-rom.S | 0
arch/{m68knommu => m68k}/platform/68360/ints.c | 0
arch/{m68knommu => m68k}/platform/68EZ328/Makefile | 0
.../platform/68EZ328/bootlogo.h | 0
arch/{m68knommu => m68k}/platform/68EZ328/config.c | 0
arch/{m68knommu => m68k}/platform/68VZ328/Makefile | 0
arch/{m68knommu => m68k}/platform/68VZ328/config.c | 0
arch/{m68knommu => m68k}/platform/Makefile | 0
.../{m68knommu => m68k}/platform/coldfire/Makefile | 0
arch/{m68knommu => m68k}/platform/coldfire/cache.c | 0
arch/{m68knommu => m68k}/platform/coldfire/clk.c | 0
arch/{m68knommu => m68k}/platform/coldfire/dma.c | 0
.../platform/coldfire/dma_timer.c | 0
arch/{m68knommu => m68k}/platform/coldfire/entry.S | 0
arch/{m68knommu => m68k}/platform/coldfire/gpio.c | 0
arch/{m68knommu => m68k}/platform/coldfire/head.S | 0
.../{m68knommu => m68k}/platform/coldfire/intc-2.c | 0
.../platform/coldfire/intc-simr.c | 0
arch/{m68knommu => m68k}/platform/coldfire/intc.c | 0
.../{m68knommu => m68k}/platform/coldfire/pinmux.c | 0
arch/{m68knommu => m68k}/platform/coldfire/pit.c | 0
.../platform/coldfire/sltimers.c | 0
.../{m68knommu => m68k}/platform/coldfire/timers.c | 0
.../platform/coldfire/vectors.c | 0
arch/m68knommu/defconfig | 74 --
arch/m68knommu/kernel/.gitignore | 1 -
arch/m68knommu/lib/ashldi3.c | 62 -
arch/m68knommu/lib/ashrdi3.c | 63 -
arch/m68knommu/lib/lshrdi3.c | 62 -
170 files changed, 407 insertions(+), 7589 deletions(-)
rewrite arch/m68k/Kconfig (72%)
rename arch/{m68knommu => m68k}/Kconfig.debug (97%)
rename arch/m68k/{Kconfig => Kconfig.mmu} (72%)
rename arch/{m68knommu/Kconfig => m68k/Kconfig.nommu} (93%)
rewrite arch/m68k/Makefile (99%)
rename arch/m68k/{Makefile => Makefile_mm} (100%)
rename arch/{m68knommu/Makefile => m68k/Makefile_no} (93%)
rename arch/{m68knommu => m68k}/configs/m5208evb_defconfig (98%)
rename arch/{m68knommu => m68k}/configs/m5249evb_defconfig (98%)
rename arch/{m68knommu => m68k}/configs/m5272c3_defconfig (98%)
rename arch/{m68knommu => m68k}/configs/m5275evb_defconfig (98%)
rename arch/{m68knommu => m68k}/configs/m5307c3_defconfig (98%)
rename arch/{m68knommu => m68k}/configs/m5407c3_defconfig (98%)
create mode 100644 arch/m68k/kernel/Makefile_mm
rename arch/{m68knommu/kernel/Makefile => m68k/kernel/Makefile_no} (100%)
rewrite arch/m68k/kernel/asm-offsets.c (99%)
rename arch/m68k/kernel/{asm-offsets.c => asm-offsets_mm.c} (100%)
rename arch/{m68knommu/kernel/asm-offsets.c => m68k/kernel/asm-offsets_no.c} (100%)
rewrite arch/m68k/kernel/dma.c (100%)
rename arch/m68k/kernel/{dma.c => dma_mm.c} (100%)
rename arch/{m68knommu/kernel/dma.c => m68k/kernel/dma_no.c} (100%)
rewrite arch/m68k/kernel/entry.S (99%)
rename arch/m68k/kernel/{entry.S => entry_mm.S} (100%)
rename arch/{m68knommu/kernel/entry.S => m68k/kernel/entry_no.S} (100%)
rename arch/{m68knommu => m68k}/kernel/init_task.c (100%)
rename arch/{m68knommu => m68k}/kernel/irq.c (100%)
rewrite arch/m68k/kernel/m68k_ksyms.c (100%)
rename arch/m68k/kernel/{m68k_ksyms.c => m68k_ksyms_mm.c} (100%)
rename arch/{m68knommu/kernel/m68k_ksyms.c => m68k/kernel/m68k_ksyms_no.c} (100%)
rewrite arch/m68k/kernel/module.c (99%)
rename arch/m68k/kernel/{module.c => module_mm.c} (100%)
rename arch/{m68knommu/kernel/module.c => m68k/kernel/module_no.c} (100%)
rewrite arch/m68k/kernel/process.c (99%)
rename arch/m68k/kernel/{process.c => process_mm.c} (100%)
rename arch/{m68knommu/kernel/process.c => m68k/kernel/process_no.c} (100%)
rewrite arch/m68k/kernel/ptrace.c (100%)
rename arch/m68k/kernel/{ptrace.c => ptrace_mm.c} (100%)
rename arch/{m68knommu/kernel/ptrace.c => m68k/kernel/ptrace_no.c} (100%)
rewrite arch/m68k/kernel/setup.c (99%)
rename arch/m68k/kernel/{setup.c => setup_mm.c} (100%)
rename arch/{m68knommu/kernel/setup.c => m68k/kernel/setup_no.c} (100%)
rewrite arch/m68k/kernel/signal.c (99%)
rename arch/m68k/kernel/{signal.c => signal_mm.c} (100%)
rename arch/{m68knommu/kernel/signal.c => m68k/kernel/signal_no.c} (100%)
rewrite arch/m68k/kernel/sys_m68k.c (100%)
rename arch/m68k/kernel/{sys_m68k.c => sys_m68k_mm.c} (100%)
rename arch/{m68knommu/kernel/sys_m68k.c => m68k/kernel/sys_m68k_no.c} (100%)
rename arch/{m68knommu => m68k}/kernel/syscalltable.S (100%)
rewrite arch/m68k/kernel/time.c (100%)
rename arch/m68k/kernel/{time.c => time_mm.c} (100%)
rename arch/{m68knommu/kernel/time.c => m68k/kernel/time_no.c} (100%)
rewrite arch/m68k/kernel/traps.c (99%)
rename arch/m68k/kernel/{traps.c => traps_mm.c} (100%)
rename arch/{m68knommu/kernel/traps.c => m68k/kernel/traps_no.c} (100%)
create mode 100644 arch/m68k/kernel/vmlinux.lds_mm.S
rename arch/{m68knommu/kernel/vmlinux.lds.S => m68k/kernel/vmlinux.lds_no.S} (100%)
create mode 100644 arch/m68k/lib/Makefile_mm
rename arch/{m68knommu/lib/Makefile => m68k/lib/Makefile_no} (100%)
rewrite arch/m68k/lib/checksum.c (100%)
rename arch/m68k/lib/{checksum.c => checksum_mm.c} (100%)
rename arch/{m68knommu/lib/checksum.c => m68k/lib/checksum_no.c} (100%)
rename arch/{m68knommu => m68k}/lib/delay.c (100%)
rename arch/{m68knommu => m68k}/lib/divsi3.S (100%)
rename arch/{m68knommu => m68k}/lib/memcpy.c (100%)
rename arch/{m68knommu => m68k}/lib/memmove.c (100%)
rename arch/{m68knommu => m68k}/lib/memset.c (100%)
rename arch/{m68knommu => m68k}/lib/modsi3.S (100%)
rewrite arch/m68k/lib/muldi3.c (100%)
rename arch/m68k/lib/{muldi3.c => muldi3_mm.c} (100%)
rename arch/{m68knommu/lib/muldi3.c => m68k/lib/muldi3_no.c} (100%)
rename arch/{m68knommu => m68k}/lib/mulsi3.S (100%)
rename arch/{m68knommu => m68k}/lib/udivsi3.S (100%)
rename arch/{m68knommu => m68k}/lib/umodsi3.S (100%)
create mode 100644 arch/m68k/mm/Makefile_mm
rename arch/{m68knommu/mm/Makefile => m68k/mm/Makefile_no} (100%)
rewrite arch/m68k/mm/init.c (99%)
rename arch/m68k/mm/{init.c => init_mm.c} (100%)
rename arch/{m68knommu/mm/init.c => m68k/mm/init_no.c} (100%)
rewrite arch/m68k/mm/kmap.c (99%)
rename arch/m68k/mm/{kmap.c => kmap_mm.c} (100%)
rename arch/{m68knommu/mm/kmap.c => m68k/mm/kmap_no.c} (100%)
rename arch/{m68knommu => m68k}/platform/5206/Makefile (100%)
rename arch/{m68knommu => m68k}/platform/5206/config.c (100%)
rename arch/{m68knommu => m68k}/platform/5206/gpio.c (100%)
rename arch/{m68knommu => m68k}/platform/5206e/Makefile (100%)
rename arch/{m68knommu => m68k}/platform/5206e/config.c (100%)
rename arch/{m68knommu => m68k}/platform/5206e/gpio.c (100%)
rename arch/{m68knommu => m68k}/platform/520x/Makefile (100%)
rename arch/{m68knommu => m68k}/platform/520x/config.c (100%)
rename arch/{m68knommu => m68k}/platform/520x/gpio.c (100%)
rename arch/{m68knommu => m68k}/platform/523x/Makefile (100%)
rename arch/{m68knommu => m68k}/platform/523x/config.c (100%)
rename arch/{m68knommu => m68k}/platform/523x/gpio.c (100%)
rename arch/{m68knommu => m68k}/platform/5249/Makefile (100%)
rename arch/{m68knommu => m68k}/platform/5249/config.c (100%)
rename arch/{m68knommu => m68k}/platform/5249/gpio.c (100%)
rename arch/{m68knommu => m68k}/platform/5249/intc2.c (100%)
rename arch/{m68knommu => m68k}/platform/5272/Makefile (100%)
rename arch/{m68knommu => m68k}/platform/5272/config.c (100%)
rename arch/{m68knommu => m68k}/platform/5272/gpio.c (100%)
rename arch/{m68knommu => m68k}/platform/5272/intc.c (100%)
rename arch/{m68knommu => m68k}/platform/527x/Makefile (100%)
rename arch/{m68knommu => m68k}/platform/527x/config.c (100%)
rename arch/{m68knommu => m68k}/platform/527x/gpio.c (100%)
rename arch/{m68knommu => m68k}/platform/528x/Makefile (100%)
rename arch/{m68knommu => m68k}/platform/528x/config.c (100%)
rename arch/{m68knommu => m68k}/platform/528x/gpio.c (100%)
rename arch/{m68knommu => m68k}/platform/5307/Makefile (100%)
rename arch/{m68knommu => m68k}/platform/5307/config.c (100%)
rename arch/{m68knommu => m68k}/platform/5307/gpio.c (100%)
rename arch/{m68knommu => m68k}/platform/5307/nettel.c (100%)
rename arch/{m68knommu => m68k}/platform/532x/Makefile (100%)
rename arch/{m68knommu => m68k}/platform/532x/config.c (100%)
rename arch/{m68knommu => m68k}/platform/532x/gpio.c (100%)
rename arch/{m68knommu => m68k}/platform/5407/Makefile (100%)
rename arch/{m68knommu => m68k}/platform/5407/config.c (100%)
rename arch/{m68knommu => m68k}/platform/5407/gpio.c (100%)
rename arch/{m68knommu => m68k}/platform/54xx/Makefile (100%)
rename arch/{m68knommu => m68k}/platform/54xx/config.c (100%)
rename arch/{m68knommu => m68k}/platform/54xx/firebee.c (100%)
rename arch/{m68knommu => m68k}/platform/68328/Makefile (100%)
rename arch/{m68knommu => m68k}/platform/68328/bootlogo.h (100%)
rename arch/{m68knommu => m68k}/platform/68328/bootlogo.pl (100%)
rename arch/{m68knommu => m68k}/platform/68328/config.c (100%)
rename arch/{m68knommu => m68k}/platform/68328/entry.S (100%)
rename arch/{m68knommu => m68k}/platform/68328/head-de2.S (100%)
rename arch/{m68knommu => m68k}/platform/68328/head-pilot.S (100%)
rename arch/{m68knommu => m68k}/platform/68328/head-ram.S (100%)
rename arch/{m68knommu => m68k}/platform/68328/head-rom.S (100%)
rename arch/{m68knommu => m68k}/platform/68328/ints.c (100%)
rename arch/{m68knommu => m68k}/platform/68328/romvec.S (100%)
rename arch/{m68knommu => m68k}/platform/68328/timers.c (100%)
rename arch/{m68knommu => m68k}/platform/68360/Makefile (100%)
rename arch/{m68knommu => m68k}/platform/68360/commproc.c (100%)
rename arch/{m68knommu => m68k}/platform/68360/config.c (100%)
rename arch/{m68knommu => m68k}/platform/68360/entry.S (100%)
rename arch/{m68knommu => m68k}/platform/68360/head-ram.S (100%)
rename arch/{m68knommu => m68k}/platform/68360/head-rom.S (100%)
rename arch/{m68knommu => m68k}/platform/68360/ints.c (100%)
rename arch/{m68knommu => m68k}/platform/68EZ328/Makefile (100%)
rename arch/{m68knommu => m68k}/platform/68EZ328/bootlogo.h (100%)
rename arch/{m68knommu => m68k}/platform/68EZ328/config.c (100%)
rename arch/{m68knommu => m68k}/platform/68VZ328/Makefile (100%)
rename arch/{m68knommu => m68k}/platform/68VZ328/config.c (100%)
rename arch/{m68knommu => m68k}/platform/Makefile (100%)
rename arch/{m68knommu => m68k}/platform/coldfire/Makefile (100%)
rename arch/{m68knommu => m68k}/platform/coldfire/cache.c (100%)
rename arch/{m68knommu => m68k}/platform/coldfire/clk.c (100%)
rename arch/{m68knommu => m68k}/platform/coldfire/dma.c (100%)
rename arch/{m68knommu => m68k}/platform/coldfire/dma_timer.c (100%)
rename arch/{m68knommu => m68k}/platform/coldfire/entry.S (100%)
rename arch/{m68knommu => m68k}/platform/coldfire/gpio.c (100%)
rename arch/{m68knommu => m68k}/platform/coldfire/head.S (100%)
rename arch/{m68knommu => m68k}/platform/coldfire/intc-2.c (100%)
rename arch/{m68knommu => m68k}/platform/coldfire/intc-simr.c (100%)
rename arch/{m68knommu => m68k}/platform/coldfire/intc.c (100%)
rename arch/{m68knommu => m68k}/platform/coldfire/pinmux.c (100%)
rename arch/{m68knommu => m68k}/platform/coldfire/pit.c (100%)
rename arch/{m68knommu => m68k}/platform/coldfire/sltimers.c (100%)
rename arch/{m68knommu => m68k}/platform/coldfire/timers.c (100%)
rename arch/{m68knommu => m68k}/platform/coldfire/vectors.c (100%)
delete mode 100644 arch/m68knommu/defconfig
delete mode 100644 arch/m68knommu/kernel/.gitignore
delete mode 100644 arch/m68knommu/lib/ashldi3.c
delete mode 100644 arch/m68knommu/lib/ashrdi3.c
delete mode 100644 arch/m68knommu/lib/lshrdi3.c
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
dissimilarity index 72%
index 525174d..6e056d3 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -1,638 +1,248 @@
-config M68K
- bool
- default y
- select HAVE_AOUT
- select HAVE_IDE
- select GENERIC_ATOMIC64
-
-config MMU
- bool
- default y
-
-config RWSEM_GENERIC_SPINLOCK
- bool
- default y
-
-config RWSEM_XCHGADD_ALGORITHM
- bool
-
-config ARCH_HAS_ILOG2_U32
- bool
-
-config ARCH_HAS_ILOG2_U64
- bool
-
-config GENERIC_HWEIGHT
- bool
- default y
-
-config GENERIC_CALIBRATE_DELAY
- bool
- default y
-
-config TIME_LOW_RES
- bool
- default y
-
-config GENERIC_IOMAP
- bool
- default y
-
-config ARCH_MAY_HAVE_PC_FDC
- bool
- depends on BROKEN && (Q40 || SUN3X)
- default y
-
-config NO_IOPORT
- def_bool y
-
-config NO_DMA
- def_bool SUN3
-
-config HZ
- int
- default 100
-
-config ARCH_USES_GETTIMEOFFSET
- def_bool y
-
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
-menu "Platform dependent setup"
-
-config EISA
- bool
- ---help---
- The Extended Industry Standard Architecture (EISA) bus was
- developed as an open alternative to the IBM MicroChannel bus.
-
- The EISA bus provided some of the features of the IBM MicroChannel
- bus while maintaining backward compatibility with cards made for
- the older ISA bus. The EISA bus saw limited use between 1988 and
- 1995 when it was made obsolete by the PCI bus.
-
- Say Y here if you are building a kernel for an EISA-based machine.
-
- Otherwise, say N.
-
-config MCA
- bool
- help
- MicroChannel Architecture is found in some IBM PS/2 machines and
- laptops. It is a bus system similar to PCI or ISA. See
- <file:Documentation/mca.txt> (and especially the web page given
- there) before attempting to build an MCA bus kernel.
-
-config PCMCIA
- tristate
- ---help---
- Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
- computer. These are credit-card size devices such as network cards,
- modems or hard drives often used with laptops computers. There are
- actually two varieties of these cards: the older 16 bit PCMCIA cards
- and the newer 32 bit CardBus cards. If you want to use CardBus
- cards, you need to say Y here and also to "CardBus support" below.
-
- To use your PC-cards, you will need supporting software from David
- Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
- for location). Please also read the PCMCIA-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as modules, choose M here: the
- modules will be called pcmcia_core and ds.
-
-config AMIGA
- bool "Amiga support"
- select MMU_MOTOROLA if MMU
- help
- This option enables support for the Amiga series of computers. If
- you plan to use this kernel on an Amiga, say Y here and browse the
- material available in <file:Documentation/m68k>; otherwise say N.
-
-config ATARI
- bool "Atari support"
- select MMU_MOTOROLA if MMU
- help
- This option enables support for the 68000-based Atari series of
- computers (including the TT, Falcon and Medusa). If you plan to use
- this kernel on an Atari, say Y here and browse the material
- available in <file:Documentation/m68k>; otherwise say N.
-
-config MAC
- bool "Macintosh support"
- select MMU_MOTOROLA if MMU
- help
- This option enables support for the Apple Macintosh series of
- computers (yes, there is experimental support now, at least for part
- of the series).
-
- Say N unless you're willing to code the remaining necessary support.
- ;)
-
-config NUBUS
- bool
- depends on MAC
- default y
-
-config M68K_L2_CACHE
- bool
- depends on MAC
- default y
-
-config APOLLO
- bool "Apollo support"
- select MMU_MOTOROLA if MMU
- help
- Say Y here if you want to run Linux on an MC680x0-based Apollo
- Domain workstation such as the DN3500.
-
-config VME
- bool "VME (Motorola and BVM) support"
- select MMU_MOTOROLA if MMU
- help
- Say Y here if you want to build a kernel for a 680x0 based VME
- board. Boards currently supported include Motorola boards MVME147,
- MVME162, MVME166, MVME167, MVME172, and MVME177. BVME4000 and
- BVME6000 boards from BVM Ltd are also supported.
-
-config MVME147
- bool "MVME147 support"
- depends on VME
- help
- Say Y to include support for early Motorola VME boards. This will
- build a kernel which can run on MVME147 single-board computers. If
- you select this option you will have to select the appropriate
- drivers for SCSI, Ethernet and serial ports later on.
-
-config MVME16x
- bool "MVME162, 166 and 167 support"
- depends on VME
- help
- Say Y to include support for Motorola VME boards. This will build a
- kernel which can run on MVME162, MVME166, MVME167, MVME172, and
- MVME177 boards. If you select this option you will have to select
- the appropriate drivers for SCSI, Ethernet and serial ports later
- on.
-
-config BVME6000
- bool "BVME4000 and BVME6000 support"
- depends on VME
- help
- Say Y to include support for VME boards from BVM Ltd. This will
- build a kernel which can run on BVME4000 and BVME6000 boards. If
- you select this option you will have to select the appropriate
- drivers for SCSI, Ethernet and serial ports later on.
-
-config HP300
- bool "HP9000/300 and HP9000/400 support"
- select MMU_MOTOROLA if MMU
- help
- This option enables support for the HP9000/300 and HP9000/400 series
- of workstations. Support for these machines is still somewhat
- experimental. If you plan to try to use the kernel on such a machine
- say Y here.
- Everybody else says N.
-
-config DIO
- bool "DIO bus support"
- depends on HP300
- default y
- help
- Say Y here to enable support for the "DIO" expansion bus used in
- HP300 machines. If you are using such a system you almost certainly
- want this.
-
-config SUN3X
- bool "Sun3x support"
- select MMU_MOTOROLA if MMU
- select M68030
- help
- This option enables support for the Sun 3x series of workstations.
- Be warned that this support is very experimental.
- Note that Sun 3x kernels are not compatible with Sun 3 hardware.
- General Linux information on the Sun 3x series (now discontinued)
- is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
-
- If you don't want to compile a kernel for a Sun 3x, say N.
-
-config Q40
- bool "Q40/Q60 support"
- select MMU_MOTOROLA if MMU
- help
- The Q40 is a Motorola 68040-based successor to the Sinclair QL
- manufactured in Germany. There is an official Q40 home page at
- <http://www.q40.de/>. This option enables support for the Q40 and
- Q60. Select your CPU below. For 68LC060 don't forget to enable FPU
- emulation.
-
-config SUN3
- bool "Sun3 support"
- depends on !MMU_MOTOROLA
- select MMU_SUN3 if MMU
- select M68020
- help
- This option enables support for the Sun 3 series of workstations
- (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
- that all other hardware types must be disabled, as Sun 3 kernels
- are incompatible with all other m68k targets (including Sun 3x!).
-
- If you don't want to compile a kernel exclusively for a Sun 3, say N.
-
-config NATFEAT
- bool "ARAnyM emulator support"
- depends on ATARI
- help
- This option enables support for ARAnyM native features, such as
- access to a disk image as /dev/hda.
-
-config NFBLOCK
- tristate "NatFeat block device support"
- depends on BLOCK && NATFEAT
- help
- Say Y to include support for the ARAnyM NatFeat block device
- which allows direct access to the hard drives without using
- the hardware emulation.
-
-config NFCON
- tristate "NatFeat console driver"
- depends on NATFEAT
- help
- Say Y to include support for the ARAnyM NatFeat console driver
- which allows the console output to be redirected to the stderr
- output of ARAnyM.
-
-config NFETH
- tristate "NatFeat Ethernet support"
- depends on NET_ETHERNET && NATFEAT
- help
- Say Y to include support for the ARAnyM NatFeat network device
- which will emulate a regular ethernet device while presenting an
- ethertap device to the host system.
-
-comment "Processor type"
-
-config M68020
- bool "68020 support"
- help
- If you anticipate running this kernel on a computer with a MC68020
- processor, say Y. Otherwise, say N. Note that the 68020 requires a
- 68851 MMU (Memory Management Unit) to run Linux/m68k, except on the
- Sun 3, which provides its own version.
-
-config M68030
- bool "68030 support"
- depends on !MMU_SUN3
- help
- If you anticipate running this kernel on a computer with a MC68030
- processor, say Y. Otherwise, say N. Note that a MC68EC030 will not
- work, as it does not include an MMU (Memory Management Unit).
-
-config M68040
- bool "68040 support"
- depends on !MMU_SUN3
- help
- If you anticipate running this kernel on a computer with a MC68LC040
- or MC68040 processor, say Y. Otherwise, say N. Note that an
- MC68EC040 will not work, as it does not include an MMU (Memory
- Management Unit).
-
-config M68060
- bool "68060 support"
- depends on !MMU_SUN3
- help
- If you anticipate running this kernel on a computer with a MC68060
- processor, say Y. Otherwise, say N.
-
-config MMU_MOTOROLA
- bool
-
-config MMU_SUN3
- bool
- depends on MMU && !MMU_MOTOROLA
-
-config M68KFPU_EMU
- bool "Math emulation support (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- help
- At some point in the future, this will cause floating-point math
- instructions to be emulated by the kernel on machines that lack a
- floating-point math coprocessor. Thrill-seekers and chronically
- sleep-deprived psychotic hacker types can say Y now, everyone else
- should probably wait a while.
-
-config M68KFPU_EMU_EXTRAPREC
- bool "Math emulation extra precision"
- depends on M68KFPU_EMU
- help
- The fpu uses normally a few bit more during calculations for
- correct rounding, the emulator can (often) do the same but this
- extra calculation can cost quite some time, so you can disable
- it here. The emulator will then "only" calculate with a 64 bit
- mantissa and round slightly incorrect, what is more than enough
- for normal usage.
-
-config M68KFPU_EMU_ONLY
- bool "Math emulation only kernel"
- depends on M68KFPU_EMU
- help
- This option prevents any floating-point instructions from being
- compiled into the kernel, thereby the kernel doesn't save any
- floating point context anymore during task switches, so this
- kernel will only be usable on machines without a floating-point
- math coprocessor. This makes the kernel a bit faster as no tests
- needs to be executed whether a floating-point instruction in the
- kernel should be executed or not.
-
-config ADVANCED
- bool "Advanced configuration options"
- ---help---
- This gives you access to some advanced options for the CPU. The
- defaults should be fine for most users, but these options may make
- it possible for you to improve performance somewhat if you know what
- you are doing.
-
- Note that the answer to this question won't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about these options.
-
- Most users should say N to this question.
-
-config RMW_INSNS
- bool "Use read-modify-write instructions"
- depends on ADVANCED
- ---help---
- This allows to use certain instructions that work with indivisible
- read-modify-write bus cycles. While this is faster than the
- workaround of disabling interrupts, it can conflict with DMA
- ( = direct memory access) on many Amiga systems, and it is also said
- to destabilize other machines. It is very likely that this will
- cause serious problems on any Amiga or Atari Medusa if set. The only
- configuration where it should work are 68030-based Ataris, where it
- apparently improves performance. But you've been warned! Unless you
- really know what you are doing, say N. Try Y only if you're quite
- adventurous.
-
-config SINGLE_MEMORY_CHUNK
- bool "Use one physical chunk of memory only" if ADVANCED && !SUN3
- default y if SUN3
- select NEED_MULTIPLE_NODES
- help
- Ignore all but the first contiguous chunk of physical memory for VM
- purposes. This will save a few bytes kernel size and may speed up
- some operations. Say N if not sure.
-
-config 060_WRITETHROUGH
- bool "Use write-through caching for 68060 supervisor accesses"
- depends on ADVANCED && M68060
- ---help---
- The 68060 generally uses copyback caching of recently accessed data.
- Copyback caching means that memory writes will be held in an on-chip
- cache and only written back to memory some time later. Saying Y
- here will force supervisor (kernel) accesses to use writethrough
- caching. Writethrough caching means that data is written to memory
- straight away, so that cache and memory data always agree.
- Writethrough caching is less efficient, but is needed for some
- drivers on 68060 based systems where the 68060 bus snooping signal
- is hardwired on. The 53c710 SCSI driver is known to suffer from
- this problem.
-
-config ARCH_DISCONTIGMEM_ENABLE
- def_bool !SINGLE_MEMORY_CHUNK
-
-config NODES_SHIFT
- int
- default "3"
- depends on !SINGLE_MEMORY_CHUNK
-
-source "mm/Kconfig"
-
-endmenu
-
-menu "General setup"
-
-source "fs/Kconfig.binfmt"
-
-config ZORRO
- bool "Amiga Zorro (AutoConfig) bus support"
- depends on AMIGA
- help
- This enables support for the Zorro bus in the Amiga. If you have
- expansion cards in your Amiga that conform to the Amiga
- AutoConfig(tm) specification, say Y, otherwise N. Note that even
- expansion cards that do not fit in the Zorro slots but fit in e.g.
- the CPU slot may fall in this category, so you have to say Y to let
- Linux use these.
-
-config AMIGA_PCMCIA
- bool "Amiga 1200/600 PCMCIA support (EXPERIMENTAL)"
- depends on AMIGA && EXPERIMENTAL
- help
- Include support in the kernel for pcmcia on Amiga 1200 and Amiga
- 600. If you intend to use pcmcia cards say Y; otherwise say N.
-
-config STRAM_PROC
- bool "ST-RAM statistics in /proc"
- depends on ATARI
- help
- Say Y here to report ST-RAM usage statistics in /proc/stram.
-
-config HEARTBEAT
- bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40
- default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300
- help
- Use the power-on LED on your machine as a load meter. The exact
- behavior is platform-dependent, but normally the flash frequency is
- a hyperbolic function of the 5-minute load average.
-
-# We have a dedicated heartbeat LED. :-)
-config PROC_HARDWARE
- bool "/proc/hardware support"
- help
- Say Y here to support the /proc/hardware file, which gives you
- access to information about the machine you're running on,
- including the model, CPU, MMU, clock speed, BogoMIPS rating,
- and memory size.
-
-config ISA
- bool
- depends on Q40 || AMIGA_PCMCIA
- default y
- help
- Find out whether you have ISA slots on your motherboard. ISA is the
- name of a bus system, i.e. the way the CPU talks to the other stuff
- inside your box. Other bus systems are PCI, EISA, MicroChannel
- (MCA) or VESA. ISA is an older system, now being displaced by PCI;
- newer boards don't support it. If you have ISA, say Y, otherwise N.
-
-config GENERIC_ISA_DMA
- bool
- depends on Q40 || AMIGA_PCMCIA
- default y
-
-config ZONE_DMA
- bool
- default y
-
-source "drivers/pci/Kconfig"
-
-source "drivers/zorro/Kconfig"
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-menu "Character devices"
-
-config ATARI_MFPSER
- tristate "Atari MFP serial support"
- depends on ATARI
- ---help---
- If you like to use the MFP serial ports ("Modem1", "Serial1") under
- Linux, say Y. The driver equally supports all kinds of MFP serial
- ports and automatically detects whether Serial1 is available.
-
- To compile this driver as a module, choose M here.
-
- Note for Falcon users: You also have an MFP port, it's just not
- wired to the outside... But you could use the port under Linux.
-
-config ATARI_MIDI
- tristate "Atari MIDI serial support"
- depends on ATARI
- help
- If you want to use your Atari's MIDI port in Linux, say Y.
-
- To compile this driver as a module, choose M here.
-
-config ATARI_DSP56K
- tristate "Atari DSP56k support (EXPERIMENTAL)"
- depends on ATARI && EXPERIMENTAL
- help
- If you want to be able to use the DSP56001 in Falcons, say Y. This
- driver is still experimental, and if you don't know what it is, or
- if you don't have this processor, just say N.
-
- To compile this driver as a module, choose M here.
-
-config AMIGA_BUILTIN_SERIAL
- tristate "Amiga builtin serial support"
- depends on AMIGA
- help
- If you want to use your Amiga's built-in serial port in Linux,
- answer Y.
-
- To compile this driver as a module, choose M here.
-
-config MULTIFACE_III_TTY
- tristate "Multiface Card III serial support"
- depends on AMIGA
- help
- If you want to use a Multiface III card's serial port in Linux,
- answer Y.
-
- To compile this driver as a module, choose M here.
-
-config GVPIOEXT
- tristate "GVP IO-Extender support"
- depends on PARPORT=n && ZORRO
- help
- If you want to use a GVP IO-Extender serial card in Linux, say Y.
- Otherwise, say N.
-
-config GVPIOEXT_LP
- tristate "GVP IO-Extender parallel printer support"
- depends on GVPIOEXT
- help
- Say Y to enable driving a printer from the parallel port on your
- GVP IO-Extender card, N otherwise.
-
-config GVPIOEXT_PLIP
- tristate "GVP IO-Extender PLIP support"
- depends on GVPIOEXT
- help
- Say Y to enable doing IP over the parallel port on your GVP
- IO-Extender card, N otherwise.
-
-config MAC_HID
- bool
- depends on INPUT_ADBHID
- default y
-
-config HPDCA
- tristate "HP DCA serial support"
- depends on DIO && SERIAL_8250
- help
- If you want to use the internal "DCA" serial ports on an HP300
- machine, say Y here.
-
-config HPAPCI
- tristate "HP APCI serial support"
- depends on HP300 && SERIAL_8250 && EXPERIMENTAL
- help
- If you want to use the internal "APCI" serial ports on an HP400
- machine, say Y here.
-
-config MVME147_SCC
- bool "SCC support for MVME147 serial ports"
- depends on MVME147 && BROKEN
- help
- This is the driver for the serial ports on the Motorola MVME147
- boards. Everyone using one of these boards should say Y here.
-
-config MVME162_SCC
- bool "SCC support for MVME162 serial ports"
- depends on MVME16x && BROKEN
- help
- This is the driver for the serial ports on the Motorola MVME162 and
- 172 boards. Everyone using one of these boards should say Y here.
-
-config BVME6000_SCC
- bool "SCC support for BVME6000 serial ports"
- depends on BVME6000 && BROKEN
- help
- This is the driver for the serial ports on the BVME4000 and BVME6000
- boards from BVM Ltd. Everyone using one of these boards should say
- Y here.
-
-config DN_SERIAL
- bool "Support for DN serial port (dummy)"
- depends on APOLLO
-
-config SERIAL_CONSOLE
- bool "Support for serial port console"
- depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
- ---help---
- If you say Y here, it will be possible to use a serial port as the
- system console (the system console is the device which receives all
- kernel messages and warnings and which allows logins in single user
- mode). This could be useful if some terminal or printer is connected
- to that serial port.
-
- Even if you say Y here, the currently visible virtual console
- (/dev/tty0) will still be used as the system console by default, but
- you can alter that using a kernel command line option such as
- "console=ttyS1". (Try "man bootparam" or see the documentation of
- your boot loader (lilo or loadlin) about how to pass options to the
- kernel at boot time.)
-
- If you don't have a VGA card installed and you say Y here, the
- kernel will automatically use the first serial line, /dev/ttyS0, as
- system console.
-
- If unsure, say N.
-
-endmenu
-
-source "fs/Kconfig"
-
-source "arch/m68k/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
+config M68K
+ bool
+ default y
+ select HAVE_IDE
+ select HAVE_AOUT if MMU
+ select GENERIC_ATOMIC64 if MMU
+ select HAVE_GENERIC_HARDIRQS if !MMU
+ select GENERIC_HARDIRQS_NO_DEPRECATED if !MMU
+
+config RWSEM_GENERIC_SPINLOCK
+ bool
+ default y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+
+config ARCH_HAS_ILOG2_U32
+ bool
+
+config ARCH_HAS_ILOG2_U64
+ bool
+
+config GENERIC_HWEIGHT
+ bool
+ default y
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config TIME_LOW_RES
+ bool
+ default y
+
+config NO_IOPORT
+ def_bool y
+
+config NO_DMA
+ def_bool (MMU && SUN3) || (!MMU && !COLDFIRE)
+
+config ZONE_DMA
+ bool
+ default y
+config HZ
+ int
+ default 1000 if CLEOPATRA
+ default 100
+
+source "init/Kconfig"
+
+source "kernel/Kconfig.freezer"
+
+config MMU
+ bool "MMU-based Paged Memory Management Support"
+ default y
+ help
+ Select if you want MMU-based virtualised addressing space
+ support by paged memory management. If unsure, say 'Y'.
+
+menu "Platform dependent setup"
+
+if MMU
+source arch/m68k/Kconfig.mmu
+endif
+if !MMU
+source arch/m68k/Kconfig.nommu
+endif
+
+source "mm/Kconfig"
+
+endmenu
+
+menu "Executable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+if !MMU
+menu "Power management options"
+
+config PM
+ bool "Power Management support"
+ help
+ Support processor power management modes
+
+endmenu
+endif
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+if MMU
+
+menu "Character devices"
+
+config ATARI_MFPSER
+ tristate "Atari MFP serial support"
+ depends on ATARI
+ ---help---
+ If you like to use the MFP serial ports ("Modem1", "Serial1") under
+ Linux, say Y. The driver equally supports all kinds of MFP serial
+ ports and automatically detects whether Serial1 is available.
+
+ To compile this driver as a module, choose M here.
+
+ Note for Falcon users: You also have an MFP port, it's just not
+ wired to the outside... But you could use the port under Linux.
+
+config ATARI_MIDI
+ tristate "Atari MIDI serial support"
+ depends on ATARI
+ help
+ If you want to use your Atari's MIDI port in Linux, say Y.
+
+ To compile this driver as a module, choose M here.
+
+config ATARI_DSP56K
+ tristate "Atari DSP56k support (EXPERIMENTAL)"
+ depends on ATARI && EXPERIMENTAL
+ help
+ If you want to be able to use the DSP56001 in Falcons, say Y. This
+ driver is still experimental, and if you don't know what it is, or
+ if you don't have this processor, just say N.
+
+ To compile this driver as a module, choose M here.
+
+config AMIGA_BUILTIN_SERIAL
+ tristate "Amiga builtin serial support"
+ depends on AMIGA
+ help
+ If you want to use your Amiga's built-in serial port in Linux,
+ answer Y.
+
+ To compile this driver as a module, choose M here.
+
+config MULTIFACE_III_TTY
+ tristate "Multiface Card III serial support"
+ depends on AMIGA
+ help
+ If you want to use a Multiface III card's serial port in Linux,
+ answer Y.
+
+ To compile this driver as a module, choose M here.
+
+config GVPIOEXT
+ tristate "GVP IO-Extender support"
+ depends on PARPORT=n && ZORRO
+ help
+ If you want to use a GVP IO-Extender serial card in Linux, say Y.
+ Otherwise, say N.
+
+config GVPIOEXT_LP
+ tristate "GVP IO-Extender parallel printer support"
+ depends on GVPIOEXT
+ help
+ Say Y to enable driving a printer from the parallel port on your
+ GVP IO-Extender card, N otherwise.
+
+config GVPIOEXT_PLIP
+ tristate "GVP IO-Extender PLIP support"
+ depends on GVPIOEXT
+ help
+ Say Y to enable doing IP over the parallel port on your GVP
+ IO-Extender card, N otherwise.
+
+config MAC_HID
+ bool
+ depends on INPUT_ADBHID
+ default y
+
+config HPDCA
+ tristate "HP DCA serial support"
+ depends on DIO && SERIAL_8250
+ help
+ If you want to use the internal "DCA" serial ports on an HP300
+ machine, say Y here.
+
+config HPAPCI
+ tristate "HP APCI serial support"
+ depends on HP300 && SERIAL_8250 && EXPERIMENTAL
+ help
+ If you want to use the internal "APCI" serial ports on an HP400
+ machine, say Y here.
+
+config MVME147_SCC
+ bool "SCC support for MVME147 serial ports"
+ depends on MVME147 && BROKEN
+ help
+ This is the driver for the serial ports on the Motorola MVME147
+ boards. Everyone using one of these boards should say Y here.
+
+config MVME162_SCC
+ bool "SCC support for MVME162 serial ports"
+ depends on MVME16x && BROKEN
+ help
+ This is the driver for the serial ports on the Motorola MVME162 and
+ 172 boards. Everyone using one of these boards should say Y here.
+
+config BVME6000_SCC
+ bool "SCC support for BVME6000 serial ports"
+ depends on BVME6000 && BROKEN
+ help
+ This is the driver for the serial ports on the BVME4000 and BVME6000
+ boards from BVM Ltd. Everyone using one of these boards should say
+ Y here.
+
+config DN_SERIAL
+ bool "Support for DN serial port (dummy)"
+ depends on APOLLO
+
+config SERIAL_CONSOLE
+ bool "Support for serial port console"
+ depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
+ ---help---
+ If you say Y here, it will be possible to use a serial port as the
+ system console (the system console is the device which receives all
+ kernel messages and warnings and which allows logins in single user
+ mode). This could be useful if some terminal or printer is connected
+ to that serial port.
+
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttyS1". (Try "man bootparam" or see the documentation of
+ your boot loader (lilo or loadlin) about how to pass options to the
+ kernel at boot time.)
+
+ If you don't have a VGA card installed and you say Y here, the
+ kernel will automatically use the first serial line, /dev/ttyS0, as
+ system console.
+
+ If unsure, say N.
+
+endmenu
+
+endif
+
+source "fs/Kconfig"
+
+source "arch/m68k/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
diff --git a/arch/m68knommu/Kconfig.debug b/arch/m68k/Kconfig.debug
similarity index 97%
rename from arch/m68knommu/Kconfig.debug
rename to arch/m68k/Kconfig.debug
index ed6d9a8..2bdb1b0 100644
--- a/arch/m68knommu/Kconfig.debug
+++ b/arch/m68k/Kconfig.debug
@@ -2,6 +2,8 @@ menu "Kernel hacking"
source "lib/Kconfig.debug"
+if !MMU
+
config FULLDEBUG
bool "Full Symbolic/Source Debugging support"
help
@@ -32,4 +34,6 @@ config BDM_DISABLE
help
Disable the ColdFire CPU's BDM signals.
+endif
+
endmenu
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig.mmu
similarity index 72%
rename from arch/m68k/Kconfig
rename to arch/m68k/Kconfig.mmu
index 525174d..16539b1 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig.mmu
@@ -1,39 +1,3 @@
-config M68K
- bool
- default y
- select HAVE_AOUT
- select HAVE_IDE
- select GENERIC_ATOMIC64
-
-config MMU
- bool
- default y
-
-config RWSEM_GENERIC_SPINLOCK
- bool
- default y
-
-config RWSEM_XCHGADD_ALGORITHM
- bool
-
-config ARCH_HAS_ILOG2_U32
- bool
-
-config ARCH_HAS_ILOG2_U64
- bool
-
-config GENERIC_HWEIGHT
- bool
- default y
-
-config GENERIC_CALIBRATE_DELAY
- bool
- default y
-
-config TIME_LOW_RES
- bool
- default y
-
config GENERIC_IOMAP
bool
default y
@@ -43,25 +7,9 @@ config ARCH_MAY_HAVE_PC_FDC
depends on BROKEN && (Q40 || SUN3X)
default y
-config NO_IOPORT
- def_bool y
-
-config NO_DMA
- def_bool SUN3
-
-config HZ
- int
- default 100
-
config ARCH_USES_GETTIMEOFFSET
def_bool y
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
-menu "Platform dependent setup"
-
config EISA
bool
---help---
@@ -406,14 +354,6 @@ config NODES_SHIFT
default "3"
depends on !SINGLE_MEMORY_CHUNK
-source "mm/Kconfig"
-
-endmenu
-
-menu "General setup"
-
-source "fs/Kconfig.binfmt"
-
config ZORRO
bool "Amiga Zorro (AutoConfig) bus support"
depends on AMIGA
@@ -471,168 +411,7 @@ config GENERIC_ISA_DMA
depends on Q40 || AMIGA_PCMCIA
default y
-config ZONE_DMA
- bool
- default y
-
source "drivers/pci/Kconfig"
source "drivers/zorro/Kconfig"
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-menu "Character devices"
-
-config ATARI_MFPSER
- tristate "Atari MFP serial support"
- depends on ATARI
- ---help---
- If you like to use the MFP serial ports ("Modem1", "Serial1") under
- Linux, say Y. The driver equally supports all kinds of MFP serial
- ports and automatically detects whether Serial1 is available.
-
- To compile this driver as a module, choose M here.
-
- Note for Falcon users: You also have an MFP port, it's just not
- wired to the outside... But you could use the port under Linux.
-
-config ATARI_MIDI
- tristate "Atari MIDI serial support"
- depends on ATARI
- help
- If you want to use your Atari's MIDI port in Linux, say Y.
-
- To compile this driver as a module, choose M here.
-
-config ATARI_DSP56K
- tristate "Atari DSP56k support (EXPERIMENTAL)"
- depends on ATARI && EXPERIMENTAL
- help
- If you want to be able to use the DSP56001 in Falcons, say Y. This
- driver is still experimental, and if you don't know what it is, or
- if you don't have this processor, just say N.
-
- To compile this driver as a module, choose M here.
-
-config AMIGA_BUILTIN_SERIAL
- tristate "Amiga builtin serial support"
- depends on AMIGA
- help
- If you want to use your Amiga's built-in serial port in Linux,
- answer Y.
-
- To compile this driver as a module, choose M here.
-
-config MULTIFACE_III_TTY
- tristate "Multiface Card III serial support"
- depends on AMIGA
- help
- If you want to use a Multiface III card's serial port in Linux,
- answer Y.
-
- To compile this driver as a module, choose M here.
-
-config GVPIOEXT
- tristate "GVP IO-Extender support"
- depends on PARPORT=n && ZORRO
- help
- If you want to use a GVP IO-Extender serial card in Linux, say Y.
- Otherwise, say N.
-
-config GVPIOEXT_LP
- tristate "GVP IO-Extender parallel printer support"
- depends on GVPIOEXT
- help
- Say Y to enable driving a printer from the parallel port on your
- GVP IO-Extender card, N otherwise.
-
-config GVPIOEXT_PLIP
- tristate "GVP IO-Extender PLIP support"
- depends on GVPIOEXT
- help
- Say Y to enable doing IP over the parallel port on your GVP
- IO-Extender card, N otherwise.
-
-config MAC_HID
- bool
- depends on INPUT_ADBHID
- default y
-
-config HPDCA
- tristate "HP DCA serial support"
- depends on DIO && SERIAL_8250
- help
- If you want to use the internal "DCA" serial ports on an HP300
- machine, say Y here.
-
-config HPAPCI
- tristate "HP APCI serial support"
- depends on HP300 && SERIAL_8250 && EXPERIMENTAL
- help
- If you want to use the internal "APCI" serial ports on an HP400
- machine, say Y here.
-
-config MVME147_SCC
- bool "SCC support for MVME147 serial ports"
- depends on MVME147 && BROKEN
- help
- This is the driver for the serial ports on the Motorola MVME147
- boards. Everyone using one of these boards should say Y here.
-
-config MVME162_SCC
- bool "SCC support for MVME162 serial ports"
- depends on MVME16x && BROKEN
- help
- This is the driver for the serial ports on the Motorola MVME162 and
- 172 boards. Everyone using one of these boards should say Y here.
-
-config BVME6000_SCC
- bool "SCC support for BVME6000 serial ports"
- depends on BVME6000 && BROKEN
- help
- This is the driver for the serial ports on the BVME4000 and BVME6000
- boards from BVM Ltd. Everyone using one of these boards should say
- Y here.
-
-config DN_SERIAL
- bool "Support for DN serial port (dummy)"
- depends on APOLLO
-
-config SERIAL_CONSOLE
- bool "Support for serial port console"
- depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
- ---help---
- If you say Y here, it will be possible to use a serial port as the
- system console (the system console is the device which receives all
- kernel messages and warnings and which allows logins in single user
- mode). This could be useful if some terminal or printer is connected
- to that serial port.
-
- Even if you say Y here, the currently visible virtual console
- (/dev/tty0) will still be used as the system console by default, but
- you can alter that using a kernel command line option such as
- "console=ttyS1". (Try "man bootparam" or see the documentation of
- your boot loader (lilo or loadlin) about how to pass options to the
- kernel at boot time.)
-
- If you don't have a VGA card installed and you say Y here, the
- kernel will automatically use the first serial line, /dev/ttyS0, as
- system console.
-
- If unsure, say N.
-
-endmenu
-
-source "fs/Kconfig"
-
-source "arch/m68k/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
diff --git a/arch/m68knommu/Kconfig b/arch/m68k/Kconfig.nommu
similarity index 93%
rename from arch/m68knommu/Kconfig
rename to arch/m68k/Kconfig.nommu
index b5424cf..273bcca 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68k/Kconfig.nommu
@@ -1,43 +1,7 @@
-config M68K
- bool
- default y
- select HAVE_IDE
- select HAVE_GENERIC_HARDIRQS
- select GENERIC_HARDIRQS_NO_DEPRECATED
-
-config MMU
- bool
- default n
-
-config NO_DMA
- bool
- depends on !COLDFIRE
- default y
-
config FPU
bool
default n
-config ZONE_DMA
- bool
- default y
-
-config RWSEM_GENERIC_SPINLOCK
- bool
- default y
-
-config RWSEM_XCHGADD_ALGORITHM
- bool
- default n
-
-config ARCH_HAS_ILOG2_U32
- bool
- default n
-
-config ARCH_HAS_ILOG2_U64
- bool
- default n
-
config GENERIC_FIND_NEXT_BIT
bool
default y
@@ -46,29 +10,14 @@ config GENERIC_GPIO
bool
default n
-config GENERIC_HWEIGHT
- bool
- default y
-
-config GENERIC_CALIBRATE_DELAY
- bool
- default y
-
config GENERIC_CMOS_UPDATE
bool
default y
-config TIME_LOW_RES
- bool
- default y
-
config GENERIC_CLOCKEVENTS
bool
default n
-config NO_IOPORT
- def_bool y
-
config COLDFIRE_SW_A7
bool
default n
@@ -85,12 +34,6 @@ config HAVE_MBAR
config HAVE_IPSBAR
bool
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
-menu "Processor type and features"
-
choice
prompt "CPU"
default M68EZ328
@@ -630,11 +573,6 @@ config 4KSTACKS
running more threads on a system and also reduces the pressure
on the VM subsystem for higher order allocations.
-config HZ
- int
- default 1000 if CLEOPATRA
- default 100
-
comment "RAM configuration"
config RAMBASE
@@ -803,10 +741,6 @@ endif
source "kernel/time/Kconfig"
-source "mm/Kconfig"
-
-endmenu
-
config ISA_DMA_API
bool
depends on !M5272
@@ -814,31 +748,3 @@ config ISA_DMA_API
source "drivers/pcmcia/Kconfig"
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
-menu "Power management options"
-
-config PM
- bool "Power Management support"
- help
- Support processor power management modes
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
-source "arch/m68knommu/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
diff --git a/arch/m68knommu/Makefile b/arch/m68k/Makefile_no
similarity index 93%
rename from arch/m68knommu/Makefile
rename to arch/m68k/Makefile_no
index 589613f..c2a6e9d 100644
--- a/arch/m68knommu/Makefile
+++ b/arch/m68k/Makefile_no
@@ -1,5 +1,5 @@
#
-# arch/m68knommu/Makefile
+# arch/m68k/Makefile
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
@@ -82,7 +82,7 @@ cpuclass-$(CONFIG_M68360) := 68360
CPUCLASS := $(cpuclass-y)
ifneq ($(CPUCLASS),$(PLATFORM))
-CLASSDIR := arch/m68knommu/platform/$(cpuclass-y)/
+CLASSDIR := arch/m68k/platform/$(cpuclass-y)/
endif
export PLATFORM BOARD MODEL CPUCLASS
@@ -114,13 +114,13 @@ KBUILD_CFLAGS += $(cflags-y)
KBUILD_CFLAGS += -D__linux__
KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\"
-head-y := arch/m68knommu/platform/$(cpuclass-y)/head.o
+head-y := arch/m68k/platform/$(cpuclass-y)/head.o
-core-y += arch/m68knommu/kernel/ \
- arch/m68knommu/mm/ \
+core-y += arch/m68k/kernel/ \
+ arch/m68k/mm/ \
$(CLASSDIR) \
- arch/m68knommu/platform/$(PLATFORM)/
-libs-y += arch/m68knommu/lib/
+ arch/m68k/platform/$(PLATFORM)/
+libs-y += arch/m68k/lib/
archclean:
diff --git a/arch/m68knommu/configs/m5208evb_defconfig b/arch/m68k/configs/m5208evb_defconfig
similarity index 98%
rename from arch/m68knommu/configs/m5208evb_defconfig
rename to arch/m68k/configs/m5208evb_defconfig
index 2f5655c..7a5967f 100644
--- a/arch/m68knommu/configs/m5208evb_defconfig
+++ b/arch/m68k/configs/m5208evb_defconfig
@@ -1,3 +1,4 @@
+# CONFIG_MMU is not set
CONFIG_EXPERIMENTAL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
diff --git a/arch/m68knommu/configs/m5249evb_defconfig b/arch/m68k/configs/m5249evb_defconfig
similarity index 98%
rename from arch/m68knommu/configs/m5249evb_defconfig
rename to arch/m68k/configs/m5249evb_defconfig
index 16df72b..fc4e033 100644
--- a/arch/m68knommu/configs/m5249evb_defconfig
+++ b/arch/m68k/configs/m5249evb_defconfig
@@ -1,3 +1,4 @@
+# CONFIG_MMU is not set
CONFIG_EXPERIMENTAL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
diff --git a/arch/m68knommu/configs/m5272c3_defconfig b/arch/m68k/configs/m5272c3_defconfig
similarity index 98%
rename from arch/m68knommu/configs/m5272c3_defconfig
rename to arch/m68k/configs/m5272c3_defconfig
index 4e6ea50..3b5591d 100644
--- a/arch/m68knommu/configs/m5272c3_defconfig
+++ b/arch/m68k/configs/m5272c3_defconfig
@@ -1,3 +1,4 @@
+# CONFIG_MMU is not set
CONFIG_EXPERIMENTAL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
diff --git a/arch/m68knommu/configs/m5275evb_defconfig b/arch/m68k/configs/m5275evb_defconfig
similarity index 98%
rename from arch/m68knommu/configs/m5275evb_defconfig
rename to arch/m68k/configs/m5275evb_defconfig
index f3dd741..fe1a30e 100644
--- a/arch/m68knommu/configs/m5275evb_defconfig
+++ b/arch/m68k/configs/m5275evb_defconfig
@@ -1,3 +1,4 @@
+# CONFIG_MMU is not set
CONFIG_EXPERIMENTAL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
diff --git a/arch/m68knommu/configs/m5307c3_defconfig b/arch/m68k/configs/m5307c3_defconfig
similarity index 98%
rename from arch/m68knommu/configs/m5307c3_defconfig
rename to arch/m68k/configs/m5307c3_defconfig
index bce0a20..342ab94 100644
--- a/arch/m68knommu/configs/m5307c3_defconfig
+++ b/arch/m68k/configs/m5307c3_defconfig
@@ -1,3 +1,4 @@
+# CONFIG_MMU is not set
CONFIG_EXPERIMENTAL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
diff --git a/arch/m68knommu/configs/m5407c3_defconfig b/arch/m68k/configs/m5407c3_defconfig
similarity index 98%
rename from arch/m68knommu/configs/m5407c3_defconfig
rename to arch/m68k/configs/m5407c3_defconfig
index 618cc32..b38aa6e 100644
--- a/arch/m68knommu/configs/m5407c3_defconfig
+++ b/arch/m68k/configs/m5407c3_defconfig
@@ -1,3 +1,4 @@
+# CONFIG_MMU is not set
CONFIG_EXPERIMENTAL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/