Re: Firmware works I think, why my networking fails?

[Piotr Hosowicz]

On 18.03.2011 12:34, Piotr Hosowicz wrote:
> Hello,
>
> The 2.6.39-git3 kernel works as usual, mii-tool shows that there is
> link. Any newer kernel fails this test. What can I do? What extra
> information would you need?

Here is some more ethtool info, when cannot connect through ADSL via eth0:

aapi205:~# cat eth0.et.BAD.txt
Settings for eth0:
        Supported ports: [ TP MII ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Half 1000baseT/Full
        Supports auto-negotiation: Yes
        Advertised link modes:  1000baseT/Half 1000baseT/Full
        Advertised pause frame use: No
        Advertised auto-negotiation: Yes
        Speed: 10Mb/s
        Duplex: Half
        Port: MII
        PHYAD: 0
        Transceiver: internal
        Auto-negotiation: on
        Supports Wake-on: pumbg
        Wake-on: g
        Current message level: 0x00000033 (51)
        Link detected: no

Regards,

Piotr Hosowicz

--
TV: "Gruchała jest taka, że cieszy się z każdego pchnięcia."
NP: Banda Do Sol - Tempo
NB: 2.6.38-git3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/