Re: [PATCHv3 3/3] ARM: mx51: Add support for low power suspend on MX51

From: Lothar WaÃmann
Date: Thu Mar 17 2011 - 06:31:47 EST


Hi,

Dinh.Nguyen@xxxxxxxxxxxxx writes:
> From: Dinh Nguyen <Dinh.Nguyen@xxxxxxxxxxxxx>
>
> Adds initial low power suspend functionality to MX51.
> Supports "mem" and "standby" modes.
>
> Tested on mx51-babbage.
>
> Signed-off-by: Dinh Nguyen <Dinh.Nguyen@xxxxxxxxxxxxx>
> ---
> arch/arm/mach-mx5/Makefile | 1 +
> arch/arm/mach-mx5/pm-imx51.c | 69 ++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 70 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/mach-mx5/pm-imx51.c
>
> diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
> index 0b9338c..787cb80 100644
> --- a/arch/arm/mach-mx5/Makefile
> +++ b/arch/arm/mach-mx5/Makefile
> @@ -6,6 +6,7 @@
> obj-y := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o system.o
> obj-$(CONFIG_SOC_IMX50) += mm-mx50.o
>
> +obj-$(CONFIG_PM) += pm-imx51.o
> obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o
> obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
> obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
> diff --git a/arch/arm/mach-mx5/pm-imx51.c b/arch/arm/mach-mx5/pm-imx51.c
> new file mode 100644
> index 0000000..4a1d915
> --- /dev/null
> +++ b/arch/arm/mach-mx5/pm-imx51.c
> @@ -0,0 +1,69 @@
> +/*
> + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +#include <linux/suspend.h>
> +#include <linux/clk.h>
> +#include <asm/mach/map.h>
> +#include <asm/cacheflush.h>
> +#include <asm/tlb.h>
> +#include <mach/system.h>
> +#include "crm_regs.h"
> +
> +struct clk *gpc_dvfs_clk;
> +
static?

> +static int mx5_suspend_enter(suspend_state_t state)
> +{
> + if (gpc_dvfs_clk == NULL)
> + gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs_clk");
> +
> + clk_enable(gpc_dvfs_clk);
>
error check?


Lothar WaÃmann
--
___________________________________________________________

Ka-Ro electronics GmbH | PascalstraÃe 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
GeschÃftsfÃhrer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996

www.karo-electronics.de | info@xxxxxxxxxxxxxxxxxxx
___________________________________________________________
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/