[PATCH 4/4] x86: Minimize SRAT messages

[Mike Travis]

Condense the SRAT: messages to show all the APIC id's on one line for
each Node.  This not only saves space in the log buf, it also makes
it easier to spot inconsistencies in core to node placement.

On a system with 2368 cores on 248 nodes the change will be...

Was 2368 lines (for 2368 cores):

 779 [0] SRAT: PXM 0 -> APIC 0x0000 -> Node 0
 780 [0] SRAT: PXM 0 -> APIC 0x0002 -> Node 0
 781 [0] SRAT: PXM 0 -> APIC 0x0004 -> Node 0
 ...
 3145 [0] SRAT: PXM 247 -> APIC 0x3df0 -> Node 247
 3146 [0] SRAT: PXM 247 -> APIC 0x3df2 -> Node 247

Now it's 248 lines (for 248 Nodes):

 821 [0] SRAT: Node 0: PXM:APIC 0:0x0 :0x2 :0x4 :0x10 :0x12 ...
 822 [0] SRAT: Node 1: PXM:APIC 1:0x40 :0x42 :0x44 :0x50 :0x52 ...
 823 [0] SRAT: Node 2: PXM:APIC 2:0x80 :0x82 :0x84 :0x90 :0x92 ...
 ...
 1067 [0] SRAT: Node 246: PXM:APIC 246:0x3d80 :0x3d82 :0x3d84 :0x3d90 ...
 1068 [0] SRAT: Node 247: PXM:APIC 247:0x3dc0 :0x3dc2 :0x3dc4 :0x3dd2 ...

Signed-off-by: Mike Travis <travis@xxxxxxx>
Reviewed-by: Jack Steiner <steiner@xxxxxxx>
Reviewed-by: Robin Holt <holt@xxxxxxx>
---
 arch/x86/mm/srat_64.c |   19 +++++++++++++++++--
 drivers/acpi/numa.c   |    7 +++++++
 2 files changed, 24 insertions(+), 2 deletions(-)

--- linux.orig/arch/x86/mm/srat_64.c
+++ linux/arch/x86/mm/srat_64.c
@@ -110,6 +110,12 @@ void __init acpi_numa_slit_init(struct a
 	memblock_x86_reserve_range(phys, phys + length, "ACPI SLIT");
 }
 
+/*
+ * Keep track of previous node and PXM values so we can combine
+ * same ones onto a single line.
+ */
+static int __initdata last_node = NUMA_NO_NODE, last_pxm =  PXM_INVAL;
+
 /* Callback for Proximity Domain -> x2APIC mapping */
 void __init
 acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa)
@@ -141,8 +147,17 @@ acpi_numa_x2apic_affinity_init(struct ac
 	set_apicid_to_node(apic_id, node);
 	node_set(node, cpu_nodes_parsed);
 	acpi_numa = 1;
-	printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u\n",
-	       pxm, apic_id, node);
+	if (node != last_node) {
+		pr_info("SRAT: Node %u: PXM:APIC %u:0x%x",
+		       node, pxm, apic_id);
+		last_node = node;
+		last_pxm = pxm;
+	} else if (pxm != last_pxm) {
+		pr_cont(" %u:0x%x", pxm, apic_id);
+		last_pxm = pxm;
+	} else {
+		pr_cont(" :0x%x", apic_id);
+	}
 }
 
 /* Callback for Proximity Domain -> LAPIC mapping */
--- linux.orig/drivers/acpi/numa.c
+++ linux/drivers/acpi/numa.c
@@ -286,6 +286,13 @@ int __init acpi_numa_init(void)
 	if (!acpi_table_parse(ACPI_SIG_SRAT, acpi_parse_srat)) {
 		acpi_table_parse_srat(ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY,
 				     acpi_parse_x2apic_affinity, 0);
+		/*
+		 * Parsing ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY entries place
+		 * multiple CPU's on the same Node line.  This can leave the
+		 * last entry "dangling" without a newline.  Insert it here.
+		 */
+		pr_cont("\n");
+
 		acpi_table_parse_srat(ACPI_SRAT_TYPE_CPU_AFFINITY,
 				     acpi_parse_processor_affinity, 0);
 		ret = acpi_table_parse_srat(ACPI_SRAT_TYPE_MEMORY_AFFINITY,

-- 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/