Re: Mass udp flow reboot linux with RealTek RTL-8169 Gigabit

[Seblu]

On Sun, Feb 13, 2011 at 2:56 PM, Francois Romieu <romieu@xxxxxxxxxxxxx> wrote:
> Eric Dumazet <eric.dumazet@xxxxxxxxx> :
> If it still does not perform better, please include the XID line of
> the r8169 driver from dmesg.
>
I've tryed on archlinux i686 distro with 2.6.37 and host reboot like
under debian.

After this, i tryed  wiith a 2.6.38-rc4 (amd64), which include your
recent patchs.

# dmesg|grep -i xid
r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc90005260000,
1c:6f:65:56:d9:17, XID 0c200000 IRQ 47

NIC seems to be reset frequently but host stop rebooting. \o//

r8169 0000:04:00.0: eth0: link up
net_ratelimit: 317 callbacks suppressed
r8169 0000:04:00.0: eth0: link up
...
net_ratelimit: 312 callbacks suppressed
r8169 0000:04:00.0: eth0: link up

i noticed a strange behaviour:
I run an iperf from computer A (gigabit plugged).
I run an ping -f from computer A.
A lot of pintk like previous one is printed on console (dmesg -n 8)

if i run an iperf from a computer B (fast eth plugged)
pings is not answered (computer A) and printk message disapear (on target)

if i run this 2nd iperf from computer A, disable iperf from computer
B, printk and ping answers are back.

i attached dmesg output.

Regards,

-- 
Sébastien Luttringer
www.seblu.net

Attachment: dmesg.2.6.38-rc4.xz
Description: application/xz