[PATCH 07/10] trivial: fix typos concerning "implementation"

From: Uwe Kleine-KÃnig
Date: Wed Feb 09 2011 - 05:09:44 EST


Signed-off-by: Uwe Kleine-KÃnig <u.kleine-koenig@xxxxxxxxxxxxxx>
---
Documentation/power/opp.txt | 2 +-
Documentation/scsi/ChangeLog.lpfc | 2 +-
arch/powerpc/include/asm/mmzone.h | 2 +-
arch/tile/include/asm/mmzone.h | 2 +-
arch/x86/include/asm/mmzone_32.h | 2 +-
drivers/media/video/cx18/cx18-io.h | 2 +-
drivers/net/irda/toim3232-sir.c | 2 +-
drivers/scsi/cxgbi/cxgb3i/cxgb3i.c | 2 +-
drivers/scsi/cxgbi/cxgb4i/cxgb4i.c | 2 +-
fs/nfsd/nfs4callback.c | 2 +-
fs/ocfs2/cluster/heartbeat.c | 2 +-
include/net/sctp/structs.h | 2 +-
12 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/Documentation/power/opp.txt b/Documentation/power/opp.txt
index cd44558..95961de 100644
--- a/Documentation/power/opp.txt
+++ b/Documentation/power/opp.txt
@@ -82,7 +82,7 @@ opp_get_{voltage, freq, opp_count} fall into this category.

opp_{add,enable,disable} are updaters which use mutex and implement it's own
RCU locking mechanisms. opp_init_cpufreq_table acts as an updater and uses
-mutex to implment RCU updater strategy. These functions should *NOT* be called
+mutex to implement RCU updater strategy. These functions should *NOT* be called
under RCU locks and other contexts that prevent blocking functions in RCU or
mutex operations from working.

diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc
index 5e83769..8b5bfa3 100644
--- a/Documentation/scsi/ChangeLog.lpfc
+++ b/Documentation/scsi/ChangeLog.lpfc
@@ -174,7 +174,7 @@ Changes from 20050201 to 20050208
lpfc_sli_chipset_init static.
* Cleaned up references to list_head->next field in the driver.
* Replaced lpfc_discq_post_event with lpfc_workq_post_event.
- * Implmented Christoph Hellwig's review from 2/5: Check for return
+ * Implemented Christoph Hellwig's review from 2/5: Check for return
values of kmalloc.
* Integrated Christoph Hellwig's patch from 1/30: Protecting
scan_tmo and friends in !FC_TRANSPORT_PATCHES_V2 &&
diff --git a/arch/powerpc/include/asm/mmzone.h b/arch/powerpc/include/asm/mmzone.h
index fd3fd58..60344eb 100644
--- a/arch/powerpc/include/asm/mmzone.h
+++ b/arch/powerpc/include/asm/mmzone.h
@@ -39,7 +39,7 @@ u64 memory_hotplug_max(void);
#endif

/*
- * Following are macros that each numa implmentation must define.
+ * Following are macros that each numa implementation must define.
*/

#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn)
diff --git a/arch/tile/include/asm/mmzone.h b/arch/tile/include/asm/mmzone.h
index c6344c4..a56937d 100644
--- a/arch/tile/include/asm/mmzone.h
+++ b/arch/tile/include/asm/mmzone.h
@@ -41,7 +41,7 @@ static inline int pfn_to_nid(unsigned long pfn)
}

/*
- * Following are macros that each numa implmentation must define.
+ * Following are macros that each numa implementation must define.
*/

#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn)
diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h
index 91df7c5..7288148 100644
--- a/arch/x86/include/asm/mmzone_32.h
+++ b/arch/x86/include/asm/mmzone_32.h
@@ -69,7 +69,7 @@ static inline int pfn_to_nid(unsigned long pfn)
}

/*
- * Following are macros that each numa implmentation must define.
+ * Following are macros that each numa implementation must define.
*/

#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn)
diff --git a/drivers/media/video/cx18/cx18-io.h b/drivers/media/video/cx18/cx18-io.h
index 18974d8..b29fe69 100644
--- a/drivers/media/video/cx18/cx18-io.h
+++ b/drivers/media/video/cx18/cx18-io.h
@@ -28,7 +28,7 @@
/*
* Readback and retry of MMIO access for reliability:
* The concept was suggested by Steve Toth <stoth@xxxxxxxxxxx>.
- * The implmentation is the fault of Andy Walls <awalls@xxxxxxxxxxxxxxxx>.
+ * The implementation is the fault of Andy Walls <awalls@xxxxxxxxxxxxxxxx>.
*
* *write* functions are implied to retry the mmio unless suffixed with _noretry
* *read* functions never retry the mmio (it never helps to do so)
diff --git a/drivers/net/irda/toim3232-sir.c b/drivers/net/irda/toim3232-sir.c
index 99e1ec0..17ef584 100644
--- a/drivers/net/irda/toim3232-sir.c
+++ b/drivers/net/irda/toim3232-sir.c
@@ -336,7 +336,7 @@ static int toim3232_change_speed(struct sir_dev *dev, unsigned speed)
* high, but it seems to have the same effect.
*
* This behaviour will probably work on dongles that have the RESET line connected,
- * but if not, add a flag for the IR320ST-2, and implment the above-listed proper
+ * but if not, add a flag for the IR320ST-2, and implement the above-listed proper
* behaviour.
*
* RTS is inverted and then fed to BR/~D, so to put it in programming mode, we
diff --git a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
index a129a17..dde8dbc 100644
--- a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
+++ b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
@@ -164,7 +164,7 @@ static struct scsi_transport_template *cxgb3i_stt;
/*
* CPL (Chelsio Protocol Language) defines a message passing interface between
* the host driver and Chelsio asic.
- * The section below implments CPLs that related to iscsi tcp connection
+ * The section below implements CPLs that related to iscsi tcp connection
* open/close/abort and data send/receive.
*/

diff --git a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
index 8c04fad..af92770 100644
--- a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
+++ b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
@@ -165,7 +165,7 @@ static struct scsi_transport_template *cxgb4i_stt;
/*
* CPL (Chelsio Protocol Language) defines a message passing interface between
* the host driver and Chelsio asic.
- * The section below implments CPLs that related to iscsi tcp connection
+ * The section below implements CPLs that related to iscsi tcp connection
* open/close/abort and data send/receive.
*/
#define DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d))
diff --git a/fs/nfsd/nfs4callback.c b/fs/nfsd/nfs4callback.c
index 3be975e..93ab180 100644
--- a/fs/nfsd/nfs4callback.c
+++ b/fs/nfsd/nfs4callback.c
@@ -414,7 +414,7 @@ static void encode_cb_sequence4args(struct xdr_stream *xdr,
* void;
* };
*
- * Our current back channel implmentation supports a single backchannel
+ * Our current back channel implementation supports a single backchannel
* with a single slot.
*/
static int decode_cb_sequence4resok(struct xdr_stream *xdr,
diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c
index b108e86..1c7a8c8 100644
--- a/fs/ocfs2/cluster/heartbeat.c
+++ b/fs/ocfs2/cluster/heartbeat.c
@@ -924,7 +924,7 @@ out:
return changed;
}

-/* This could be faster if we just implmented a find_last_bit, but I
+/* This could be faster if we just implemented a find_last_bit, but I
* don't think the circumstances warrant it. */
static int o2hb_highest_node(unsigned long *nodes,
int numbits)
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index cc9185c..21531d9 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -1248,7 +1248,7 @@ typedef enum {
} sctp_endpoint_type_t;

/*
- * A common base class to bridge the implmentation view of a
+ * A common base class to bridge the implementation view of a
* socket (usually listening) endpoint versus an association's
* local endpoint.
* This common structure is useful for several purposes:
--
1.7.2.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/