Re: [PATCH] drm/i915: Suppress spurious vblank interrupts

[Jesse Barnes]

On Tue, 1 Feb 2011 19:37:09 -0800
Hugh Dickins <hughd@xxxxxxxxxx> wrote:

> On Tue, Feb 1, 2011 at 11:32 AM, Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx> wrote:
> 
> > What I find strange is that you're seeing flip pending interrupts. ÂAre
> > your symptoms affected if you remove the
> > I915_DISPLAY_PLANE_[AB]_FLIP_PENDING_INTERRUPT lines from
> > I915_INTERRUPT_ENABLE_FIX at the top of i915_irq.c?
> 
> No.  The first time it looked like yes it fixed it; but when I
> rebooted again, same symptoms and same underruns back: this thing is
> very erratic.
> 
> > Do you see any calls to drm_mode_page_flip_ioctl() in your environment?
> 
> None at all.
> 
> Sometime I should do a bisection between v2.6.36 and v2.6.37 to see
> what started the underruns; but I can't promise when "sometime" will
> arrive.

But presumably the FLIP_PENDING_INTERRUPT bits are stuck on in your
case, otherwise we wouldn't be getting to flip prepare/finish at all.

Some updated docs indicate those bits may not be reliable on 965
(though earlier ones did), so we may need to disable the flip code
entirely on 965 if we can't figure out what's going wrong on your
config...

-- 
Jesse Barnes, Intel Open Source Technology Center
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/