Re: [git patches] libata updates for 2.6.37

[Tejun Heo]

On 11/30/2010 04:38 PM, Kyle McMartin wrote:
> On Tue, Nov 30, 2010 at 03:13:58PM +0100, Tejun Heo wrote:
>>> Tejun, any ideas how I can debug this?
>>
>> Hmm... DIPM commands are failing with AC_ERR_OTHER.  Other than DIPM
>> not being configured and speed capped at 1.5Gbps, the machine works
>> fine afterwards, right?  Are you up for applying debug patches?
>>
> 
> Yup, it's chugging along happily, though I notice kernel builds are
> taking a minute or two longer (but I don't bother to time them so it's
> purely subjective.)
> 
> Be happy to apply any debug patches, but I plan on replacing the drive
> with a faster one at some point in the next few weeks.

Can you please apply the following patch and report the resulting
kernel log?  You're on ahci, right?

diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index ebc08d6..b1c39db 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -1560,6 +1560,10 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
 	}

 	/* okay, let's hand over to EH */
+	if (active_qc && ata_tag_internal(active_qc->tag))
+		ata_dev_printk(active_qc->dev, KERN_WARNING,
+			       "ahci: internal command failure, irq_stat=0x%x\n",
+			       irq_stat);

 	if (irq_stat & PORT_IRQ_FREEZE)
 		ata_port_freeze(ap);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 7f77c67..7cf236b 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1668,6 +1668,10 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,

 	/* perform minimal error analysis */
 	if (qc->flags & ATA_QCFLAG_FAILED) {
+		ata_dev_printk(dev, KERN_WARNING,
+			       "internal command failure: stat=0x%x ehi_desc=\"%s\"\n",
+			       qc->tf.command, dev->link->eh_info.desc);
+
 		if (qc->result_tf.command & (ATA_ERR | ATA_DF))
 			qc->err_mask |= AC_ERR_DEV;

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/