[PATCH 03/11] x86/dtb: Add a device tree for CE4100
From: Sebastian Andrzej Siewior
Date: Thu Nov 25 2010 - 12:43:57 EST
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
CC: x86@xxxxxxxxxx
Cc: devicetree-discuss@xxxxxxxxxxxxxxxx
Signed-off-by: Dirk Brandewie <dirk.brandewie@xxxxxxxxx>
---
arch/x86/platform/ce4100/ce4100.dts | 210 +++++++++++++++++++++++++++++++++++
1 files changed, 210 insertions(+), 0 deletions(-)
create mode 100644 arch/x86/platform/ce4100/ce4100.dts
diff --git a/arch/x86/platform/ce4100/ce4100.dts b/arch/x86/platform/ce4100/ce4100.dts
new file mode 100644
index 0000000..2901882
--- /dev/null
+++ b/arch/x86/platform/ce4100/ce4100.dts
@@ -0,0 +1,210 @@
+/*
+ * CE4100 on Falcon Falls
+ *
+ * (c) Copyright 2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+/dts-v1/;
+/ {
+ model = "x86,CE4100";
+ compatible = "x86,CE4100";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ x86,Atom@0 {
+ device_type = "cpu";
+ };
+ };
+
+ atom@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+ ranges;
+
+ /* Local APIC */
+ lapic@fee00000 {
+ compatible = "intel,lapic";
+ reg = <0xfee00000 0x1000>;
+ phys_reg = <0xfee00000>;
+ };
+ /* Primary IO-APIC */
+ ioapic1: pic@fec00000 {
+ #interrupt-cells = <2>;
+ compatible = "intel,ioapic";
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ id = <1>;
+ reg = <0xfec00000 0x1000>;
+ phys_reg = <0xfec00000>;
+ };
+
+ hpet@fed00000 {
+ compatible = "intel,hpet";
+ reg = <0xfed00000 0x200>;
+ phys_reg = <0xfed00000>;
+ };
+ };
+
+ isa@legacy {
+ device_type = "isa";
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x400>;
+
+ rtc@legacy {
+ compatible = "motorola,mc146818";
+ interrupts = <8 3>;
+ interrupt-parent = <&ioapic1>;
+ ctrl_reg = <2>;
+ freq_reg = <0x26>;
+ reg = <1 0x70 2>;
+ };
+
+ pci@3fc {
+ #address-cells = <3>;
+ #interrupt-cells = <1>;
+ #size-cells = <1>;
+ compatible = "intel,ce4100-pci";
+ device_type = "pci";
+ bus-range = <0 0>;
+
+ /* Secondary IO-APIC */
+ ioapic2: pic@bffff000 {
+ #interrupt-cells = <2>;
+ compatible = "intel,ioapic";
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ id = <2>;
+ reg = <0x100 0x0 0x0 0x0>;
+ phys_reg = <0xbffff000>;
+ };
+
+ pci@av {
+ #address-cells = <3>;
+ #interrupt-cells = <1>;
+ #size-cells = <1>;
+ compatible = "intel,ce4100-pci";
+ device_type = "pci";
+ bus-range = <1 1>;
+ interrupt-map-mask = <0xffffff 0x0 0x0 0x0>;
+ interrupt-map = <
+ /* GFX: 0x2E5B */
+ 0x11000 0x0 0x0 0x0 &ioapic2 0 0x1
+ /* ***** FIXME ****** Compositing Engine: 0x2E72 */
+ /* 0x11100 0x0 0x0 0x1 &ioapic2 0 0x1 */
+ /* MFD: 0x2E5C */
+ 0x11800 0x0 0x0 0x0 &ioapic2 2 0x1
+ /* TS Prefilter: 0x2E5D */
+ 0x12000 0x0 0x0 0x0 &ioapic2 4 0x1
+ /* TS Demux: 0x2E5E */
+ 0x12100 0x0 0x0 0x0 &ioapic2 5 0x1
+ /* ***** FIXME ***** Audio DSP: 0x2E5F */
+ /* 0x13000 0x0 0x0 0x1 &ioapic2 0 0x1 */
+ /* Audio Interfaces: 0x2E60 */
+ 0x13200 0x0 0x0 0x0 &ioapic2 8 0x1
+ /* VDC: 0x2E61 */
+ 0x14000 0x0 0x0 0x0 &ioapic2 9 0x1
+ /* DPE: 0x2E62 */
+ 0x14100 0x0 0x0 0x0 &ioapic2 10 0x1
+ /* HDMI Tx: 0x2E63 */
+ 0x14200 0x0 0x0 0x0 &ioapic2 11 0x1
+ /* SEC: 0x2E64 */
+ 0x14800 0x0 0x0 0x0 &ioapic2 12 0x1
+ /* EXP: 0x2E65 */
+ 0x15000 0x0 0x0 0x0 &ioapic2 13 0x1
+ /* UART0/1: 0x2E66 */
+ 0x15800 0x0 0x0 0x0 &ioapic2 14 0x1
+ /* GPIO: 0x2E67 */
+ 0x15900 0x0 0x0 0x0 &ioapic2 15 0x1
+ /* I2C0/1/2: 0x2E68 */
+ 0x15a00 0x0 0x0 0x0 &ioapic2 16 0x1
+ /* Smart Card 0/1: 0x2E69 */
+ 0x15b00 0x0 0x0 0x0 &ioapic2 15 0x1
+ /* SPI: 0x2E6A */
+ 0x15c00 0x0 0x0 0x0 &ioapic2 15 0x1
+ /* MSPOD: 0x2E6B */
+ 0x15d00 0x0 0x0 0x0 &ioapic2 19 0x1
+ /* IR: 0x2E6C */
+ 0x15e00 0x0 0x0 0x0 &ioapic2 16 0x1
+ /* **** FIXME ***** DFX: 0x2E6D */
+ /* 0x15f00 0x0 0x0 0x1 &ioapic2 0x0 0x1 */
+ /* Gig Ethernet: 0x2E6E */
+ 0x16000 0x0 0x0 0x0 &ioapic2 21 0x1
+ /* IEEE1588 and Clock Recovery Unit: 0x2E6F */
+ 0x16100 0x0 0x0 0x0 &ioapic2 3 0x1
+ /* USB0: 0x2E70 */
+ 0x16800 0x0 0x0 0x0 &ioapic2 22 0x3
+ /* USB1: 0x2E70 */
+ 0x16900 0x0 0x0 0x0 &ioapic2 22 0x3
+ /* SATA: 0x2E71 */
+ 0x17000 0x0 0x0 0x0 &ioapic2 23 0x3
+ >;
+
+ i2c@15a00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x15a00 0x0 0x0 0x0>;
+
+
+ i2c@0 {
+ reg = <0>;
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ pcf8575@26 {
+ compatible = "ti,pcf8575";
+ reg = <0x26>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ pcf8575@26 {
+ compatible = "ti,pcf8575";
+ reg = <0x26>;
+ };
+ };
+ };
+
+ spi@15c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x15c00 0x0 0x0 0x0>;
+
+ pcm1755@0 {
+ compatible = "ti,pcm1755";
+ reg = <0>;
+ spi-max-frequency = <115200>;
+ };
+
+ pcm1609a@1 {
+ compatible = "ti,pcm1609a";
+ reg = <1>;
+ spi-max-frequency = <115200>;
+ };
+
+ at93c46@2 {
+ compatible = "atmel,at93c46";
+ reg = <2>;
+ spi-max-frequency = <115200>;
+ };
+ };
+ };
+ };
+ };
+};
--
1.7.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/