[RFC/PATCH] i2c/busses: Add support for Diolan U2C-12 USB/I2C adapter
From: Guenter Roeck
Date: Wed Nov 03 2010 - 20:10:00 EST
Signed-off-by: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
---
This is an usb-i2c adapter I am using to connect to i2c evaluation and test
boards. Not sure if it is worth adding it into the kernel. If yes, I'll be
happy to add myself as maintainer.
drivers/i2c/busses/Kconfig | 10 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-diolan-u2c.c | 455 +++++++++++++++++++++++++++++++++++
3 files changed, 466 insertions(+), 0 deletions(-)
create mode 100644 drivers/i2c/busses/i2c-diolan-u2c.c
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 3a6321c..d73be36 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -640,6 +640,16 @@ config I2C_XILINX
comment "External I2C/SMBus adapter drivers"
+config I2C_DIOLAN_U2C
+ tristate "Diolan U2C-12 USB adapter"
+ depends on USB
+ help
+ If you say yes to this option, support will be included for Diolan
+ U2C-12, a USB to I2C interface.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-diolan-u2c.
+
config I2C_PARPORT
tristate "Parallel port adapter"
depends on PARPORT
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 84cb16a..46315db 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -63,6 +63,7 @@ obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o
obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o
# External I2C/SMBus adapter drivers
+obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o
diff --git a/drivers/i2c/busses/i2c-diolan-u2c.c b/drivers/i2c/busses/i2c-diolan-u2c.c
new file mode 100644
index 0000000..5f4fb74
--- /dev/null
+++ b/drivers/i2c/busses/i2c-diolan-u2c.c
@@ -0,0 +1,455 @@
+/*
+ * driver for the Diolan u2c-12 usb adapter
+ *
+ * Copyright (c) 2010 Ericsson AB
+ *
+ * Derived from:
+ * i2c-tiny-usb.c
+ * Copyright (C) 2006-2007 Till Harbaum (Till@xxxxxxxxxxx)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/i2c.h>
+
+#define USB_VENDOR_ID_DIOLAN 0x0abf
+#define USB_DEVICE_ID_DIOLAN_U2C 0x3370
+
+#define DIOLAN_OUT_EP 0x02
+#define DIOLAN_IN_EP 0x84
+
+/* commands via USB, must match command ids in the firmware */
+#define CMD_I2C_READ 0x01
+#define CMD_I2C_WRITE 0x02
+#define CMD_I2C_SCAN 0x03 /* Returns list of detected devices */
+#define CMD_I2C_RELEASE_SDA 0x04
+#define CMD_I2C_RELEASE_SCL 0x05
+#define CMD_I2C_DROP_SDA 0x06
+#define CMD_I2C_DROP_SCL 0x07
+#define CMD_I2C_READ_SDA 0x08
+#define CMD_I2C_READ_SCL 0x09
+#define CMD_GET_FW_VERSION 0x0a
+#define CMD_GET_SERIAL 0x0b
+#define CMD_I2C_START 0x0c
+#define CMD_I2C_STOP 0x0d
+#define CMD_I2C_REPEATED_START 0x0e
+#define CMD_I2C_PUT_BYTE 0x0f
+#define CMD_I2C_GET_BYTE 0x10
+#define CMD_I2C_PUT_ACK 0x11
+#define CMD_I2C_GET_ACK 0x12
+#define CMD_I2C_PUT_BYTE_ACK 0x13
+#define CMD_I2C_GET_BYTE_ACK 0x14
+#define CMD_I2C_SET_SPEED 0x1b
+#define CMD_I2C_GET_SPEED 0x1c
+#define CMD_SET_CLOCK_SYNCH 0x24
+#define CMD_GET_CLOCK_SYNCH 0x25
+#define CMD_SET_CLOCK_SYNCH_TO 0x26
+#define CMD_GET_CLOCK_SYNCH_TO 0x27
+
+#define RESP_OK 0x00
+#define RESP_FAILED 0x01
+#define RESP_BAD_MEMADDR 0x04
+#define RESP_DATA_ERR 0x05
+#define RESP_NOT_IMPLEMENTED 0x06
+#define RESP_NACK 0x07
+
+#define U2C_I2C_FREQ_FAST 0 /* 400 kHz */
+#define U2C_I2C_FREQ_STD 1 /* 100 kHz */
+#define U2C_I2C_FREQ_83KHZ 2
+#define U2C_I2C_FREQ_71KHZ 3
+#define U2C_I2C_FREQ_62KHZ 4
+#define U2C_I2C_FREQ_50KHZ 6
+#define U2C_I2C_FREQ_25KHZ 16
+#define U2C_I2C_FREQ_10KHZ 46
+#define U2C_I2C_FREQ_5KHZ 96
+#define U2C_I2C_FREQ_2KHZ 242
+
+#define DIOLAN_USB_TIMEOUT 100
+
+/* Structure to hold all of our device specific stuff */
+struct i2c_diolan_u2c {
+ struct usb_device *usb_dev; /* the usb device for this device */
+ struct usb_interface *interface;/* the interface for this device */
+ struct i2c_adapter adapter; /* i2c related things */
+};
+
+/* usb layer */
+
+static int diolan_usb_transfer(struct i2c_adapter *adapter, u8 * obuffer,
+ int olen, u8 *ibuffer, int ilen)
+{
+ struct i2c_diolan_u2c *dev = adapter->algo_data;
+ int ret = 0;
+ int actual;
+ unsigned char inbuffer[257];
+
+ if (olen) {
+ ret = usb_bulk_msg(dev->usb_dev,
+ usb_sndbulkpipe(dev->usb_dev, DIOLAN_OUT_EP),
+ obuffer, olen, &actual, DIOLAN_USB_TIMEOUT);
+ }
+ if (!ret) {
+ ret = usb_bulk_msg(dev->usb_dev,
+ usb_rcvbulkpipe(dev->usb_dev, DIOLAN_IN_EP),
+ inbuffer, sizeof(inbuffer), &actual,
+ DIOLAN_USB_TIMEOUT);
+ if (ret == 0 && actual > 0) {
+ ret = min(actual, ilen);
+ switch (inbuffer[actual - 1]) {
+ case RESP_NACK:
+ ret = -EINVAL;
+ goto abort;
+ case RESP_OK:
+ break;
+ default:
+ ret = -EIO;
+ goto abort;
+ }
+ if (ret)
+ memcpy(ibuffer, inbuffer, ret);
+ }
+ }
+abort:
+ return ret;
+}
+
+/*
+ * Flush input queue.
+ * If we don't do this at startup and the controller has queued up
+ * messages which were not retrieved, it will stop responding
+ * at some point.
+ */
+static void diolan_flush_input(struct usb_device *dev)
+{
+ int i;
+
+ for (i = 0; i < 10; i++) {
+ int actual = 0;
+ int ret;
+ u8 inbuffer[257];
+
+ ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, DIOLAN_IN_EP),
+ inbuffer, sizeof(inbuffer), &actual,
+ DIOLAN_USB_TIMEOUT);
+ if (ret < 0 || actual == 0)
+ break;
+ }
+}
+
+static int diolan_i2c_start(struct i2c_adapter *adapter)
+{
+ u8 buffer[1];
+
+ buffer[0] = CMD_I2C_START;
+
+ return diolan_usb_transfer(adapter, buffer, 1, buffer, 1);
+}
+
+static int diolan_i2c_repeated_start(struct i2c_adapter *adapter)
+{
+ u8 buffer[1];
+
+ buffer[0] = CMD_I2C_REPEATED_START;
+
+ return diolan_usb_transfer(adapter, buffer, 1, buffer, 1);
+}
+
+static int diolan_i2c_stop(struct i2c_adapter *adapter)
+{
+ u8 buffer[1];
+
+ buffer[0] = CMD_I2C_STOP;
+
+ return diolan_usb_transfer(adapter, buffer, 1, buffer, 1);
+}
+
+static int diolan_i2c_get_byte_ack(struct i2c_adapter *adapter, bool ack,
+ u8 *byte)
+{
+ u8 buffer[2];
+ int rv;
+
+ buffer[0] = CMD_I2C_GET_BYTE_ACK;
+ buffer[1] = ack;
+
+ rv = diolan_usb_transfer(adapter, buffer, 2, buffer, 2);
+ if (rv > 0)
+ *byte = buffer[0];
+ else if (rv == 0)
+ rv = -EIO;
+
+ return rv;
+}
+
+static int diolan_i2c_put_byte_ack(struct i2c_adapter *adapter, u8 byte)
+{
+ u8 buffer[2];
+
+ buffer[0] = CMD_I2C_PUT_BYTE_ACK;
+ buffer[1] = byte;
+
+ return diolan_usb_transfer(adapter, buffer, 2, buffer, 1);
+}
+
+static int diolan_set_speed(struct i2c_adapter *adapter, u8 speed)
+{
+ u8 buffer[2];
+
+ buffer[0] = CMD_I2C_SET_SPEED;
+ buffer[1] = speed;
+
+ return diolan_usb_transfer(adapter, buffer, 2, buffer, 1);
+}
+
+static int diolan_fw_version(struct i2c_adapter *adapter)
+{
+ u8 buffer[3];
+ int ret;
+
+ buffer[0] = CMD_GET_FW_VERSION;
+ ret = diolan_usb_transfer(adapter, buffer, 1, buffer, 3);
+ if (ret == 3)
+ dev_info(&adapter->dev,
+ "Diolan U2C firmware version %d.%d\n",
+ buffer[0], buffer[1]);
+ return ret;
+}
+
+static int diolan_get_serial(struct i2c_adapter *adapter)
+{
+ u8 buffer[5];
+ int ret;
+
+ buffer[0] = CMD_GET_SERIAL;
+ ret = diolan_usb_transfer(adapter, buffer, 1, buffer, 5);
+ if (ret == 5)
+ dev_info(&adapter->dev,
+ "Diolan U2C serial number %d\n", *(u32 *) &buffer[0]);
+ return ret;
+}
+
+static int diolan_scan(struct i2c_adapter *adapter)
+{
+ u8 buffer[257];
+ int i, ret;
+
+ buffer[0] = CMD_I2C_SCAN;
+ ret = diolan_usb_transfer(adapter, buffer, 1, buffer, 257);
+ if (ret > 0) {
+ for (i = 0; i < ret - 1; i++) {
+ if (buffer[i])
+ dev_info(&adapter->dev,
+ "Found I2C device at address 0x%x\n",
+ buffer[i] >> 1);
+ }
+ }
+ return ret;
+}
+
+/* i2c layer */
+
+static int usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num)
+{
+ struct i2c_msg *pmsg;
+ int i, j;
+ int rc = 0;
+
+ rc = diolan_i2c_start(adapter);
+ if (rc < 0)
+ return rc;
+
+ for (i = 0; i < num; i++) {
+ pmsg = &msgs[i];
+ if (i) {
+ rc = diolan_i2c_repeated_start(adapter);
+ if (rc < 0)
+ goto abort;
+ }
+ if (pmsg->flags & I2C_M_RD) {
+ rc = diolan_i2c_put_byte_ack(adapter,
+ ((pmsg->addr & 0x7f) << 1) | 1);
+ if (rc < 0)
+ goto abort;
+ for (j = 0; j < pmsg->len; j++) {
+ u8 byte;
+ bool ack = j < pmsg->len - 1;
+
+ /*
+ * Don't send NACK if this is the first byte
+ * of a SMBUS_BLOCK message.
+ */
+ if (j == 0 && (pmsg->flags & I2C_M_RECV_LEN))
+ ack = true;
+
+ rc = diolan_i2c_get_byte_ack(adapter, ack,
+ &byte);
+ if (rc < 0)
+ goto abort;
+ /*
+ * Adjust count if first received byte is length
+ */
+ if (j == 0 && (pmsg->flags & I2C_M_RECV_LEN)) {
+ if (byte == 0
+ || byte > I2C_SMBUS_BLOCK_MAX) {
+ rc = -EREMOTEIO;
+ goto abort;
+ }
+ pmsg->len += byte;
+ }
+ pmsg->buf[j] = byte;
+ }
+ } else {
+ rc = diolan_i2c_put_byte_ack(adapter,
+ (pmsg->addr & 0x7f) << 1);
+ if (rc < 0)
+ goto abort;
+ for (j = 0; j < pmsg->len; j++) {
+ rc = diolan_i2c_put_byte_ack(adapter,
+ pmsg->buf[j]);
+ if (rc < 0)
+ goto abort;
+ }
+ }
+ }
+abort:
+ diolan_i2c_stop(adapter);
+ return rc;
+}
+
+/*
+ * Return list of supported functionality.
+ */
+static u32 usb_func(struct i2c_adapter *a)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
+ I2C_FUNC_SMBUS_READ_BLOCK_DATA;
+}
+
+static const struct i2c_algorithm usb_algorithm = {
+ .master_xfer = usb_xfer,
+ .functionality = usb_func,
+};
+
+/* device layer */
+
+static struct usb_device_id i2c_diolan_u2c_table[] = {
+ {USB_DEVICE(USB_VENDOR_ID_DIOLAN, USB_DEVICE_ID_DIOLAN_U2C)},
+ {}
+};
+
+MODULE_DEVICE_TABLE(usb, i2c_diolan_u2c_table);
+
+static void i2c_diolan_u2c_free(struct i2c_diolan_u2c *dev)
+{
+ usb_put_dev(dev->usb_dev);
+ kfree(dev);
+}
+
+static int i2c_diolan_u2c_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct i2c_diolan_u2c *dev;
+ int retval = -ENOMEM;
+
+ /* allocate memory for our device state and initialize it */
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (dev == NULL) {
+ dev_err(&interface->dev, "Out of memory\n");
+ goto error;
+ }
+
+ dev->usb_dev = usb_get_dev(interface_to_usbdev(interface));
+ dev->interface = interface;
+
+ /* save our data pointer in this interface device */
+ usb_set_intfdata(interface, dev);
+
+ dev_info(&interface->dev,
+ "Diolan U2C at bus %03d address %03d\n",
+ dev->usb_dev->bus->busnum, dev->usb_dev->devnum);
+
+ /* setup i2c adapter description */
+ dev->adapter.owner = THIS_MODULE;
+ dev->adapter.class = I2C_CLASS_HWMON;
+ dev->adapter.algo = &usb_algorithm;
+ dev->adapter.algo_data = dev;
+ snprintf(dev->adapter.name, sizeof(dev->adapter.name),
+ "i2c-u2c-usb at bus %03d device %03d",
+ dev->usb_dev->bus->busnum, dev->usb_dev->devnum);
+
+ dev->adapter.dev.parent = &dev->interface->dev;
+
+ diolan_flush_input(dev->usb_dev);
+
+ /* and finally attach to i2c layer */
+ i2c_add_adapter(&dev->adapter);
+
+ diolan_fw_version(&dev->adapter);
+
+ retval = diolan_set_speed(&dev->adapter, U2C_I2C_FREQ_STD);
+ if (retval < 0) {
+ dev_err(&dev->adapter.dev,
+ "failure %d setting I2C bus frequency\n", retval);
+ goto error_del;
+ }
+ diolan_get_serial(&dev->adapter);
+ diolan_scan(&dev->adapter);
+
+ dev_dbg(&dev->adapter.dev, "connected i2c-u2c-usb device\n");
+
+ return 0;
+
+error_del:
+ i2c_del_adapter(&dev->adapter);
+ i2c_diolan_u2c_free(dev);
+error:
+ return retval;
+}
+
+static void i2c_diolan_u2c_disconnect(struct usb_interface *interface)
+{
+ struct i2c_diolan_u2c *dev = usb_get_intfdata(interface);
+
+ i2c_del_adapter(&dev->adapter);
+ usb_set_intfdata(interface, NULL);
+ i2c_diolan_u2c_free(dev);
+
+ dev_dbg(&interface->dev, "disconnected\n");
+}
+
+static struct usb_driver i2c_diolan_u2c_driver = {
+ .name = "i2c-u2c-usb",
+ .probe = i2c_diolan_u2c_probe,
+ .disconnect = i2c_diolan_u2c_disconnect,
+ .id_table = i2c_diolan_u2c_table,
+};
+
+static int __init usb_i2c_diolan_u2c_init(void)
+{
+ /* register this driver with the USB subsystem */
+ return usb_register(&i2c_diolan_u2c_driver);
+}
+
+static void __exit usb_i2c_diolan_u2c_exit(void)
+{
+ /* deregister this driver with the USB subsystem */
+ usb_deregister(&i2c_diolan_u2c_driver);
+}
+
+module_init(usb_i2c_diolan_u2c_init);
+module_exit(usb_i2c_diolan_u2c_exit);
+
+/* ----- end of usb layer ------------------------------------------------ */
+
+MODULE_AUTHOR("Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>");
+MODULE_DESCRIPTION("i2c-u2c-usb driver");
+MODULE_LICENSE("GPL");
--
1.7.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/