[em28xx] BUG: unable to handle kernel paging request at ffff880478a16ff8 IP: [<ffffffff81436cf1>] ir_g_keycode_from_table+0x4d/0xb1
From: Sander Eikelenboom
Date: Wed Oct 27 2010 - 06:10:10 EST
Hi Mauro,
When plugging in my em28xx based grabber in a USB2.0 port i get this stack trace (complete boot log attached)
Kernel used: Linus tree commit 12ba8d1e9262ce81a695795410bd9ee5c9407ba1 (pull of todays 2.6.37 merge window tree)
[ 43.628015] u 2-4: new high sed USB device usg ehci_hcd and address 2
[ 43.755974] u 2-4: New USB dece found, idVend=2304, idProduct208
[ 43.7626] usb 2-4: New USB device stris: Mfr=2, Produc1, SerialNumber=
[ 43.769828] b 2-4: Product: PCTV USB2 PAL
[ 43.774013usb 2-4: Manufacturer: Pinnacle Systems GmbH
[ 43.779540] em28xx: New device Pinnacle Systems GmbH PCTV USB2 PAL @ 480 Mbps (2304:0208, interface 0, class 0)
[ 43.789721] em28xx #0: chip ID is em2820 (or em2710)
[ 43.894981] e8xx #0: i2c eepr 00: 1a eb 67 9504 23 08 02 10 001e 03 98 1e 6a 2e
[ 43.903147] em28xx #0: i2c prom 10:
00 00 0 57 6e 00 00 00 8e 00 00 00 07 00 00 00
[ 43.911317] em28xx #0: i2c eeprom 20: 16 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 43.919456] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 01 00 00 00 00 00 00
[ 43.927620] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 43.935751] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 43.943907] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 2e 03 50 00 69 00
[ 43.952066] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
[ 43.960227] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 20 00 47 00
[ 43.968385] em28xx #0: i2c eeprom 90: 6d 00 62 00 48 00 00 00 1e 03 50 00 43 00 54 00
[ 43.976531] em28xx #0: i2c eeprom a0: 56 00 20 00 55 00 53 00 42 00 32 00 20 00 50 00
[ 43.984687] em28xx #0: i2c eeprom b0: 41 00 4c 00 00 00 06 03 31 00 00 00 00 00 00 00
[ 43.992834] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 44.000990] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 44.009143] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 44.017288] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 07 56 d9 35 01 ed 0b f8
[ 44.025436] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x0fd77740
[ 44.031957] em28xx #0: EEPROM info:
[ 44.035449] em28xx #0: AC97 audio (5 sample rates)
[ 44.040241] em28xx #0: 500mA max power
[ 44.043996] em28xx #0: Table at 0x06, strings=0x1e98, 0x2e6a, 0x0000
[ 44.051400] Registered IR keymap rc-pinnacle-grey
[ 44.056170] input: i2c IR (i2c IR (EM28XX Pinnacle as /devices/virtual/rc/rc0/input4
[ 44.063962] rc0: i2c IR (i2c IR (EM28XX Pinnacle as /devices/virtual/rc/rc0
[ 44.070928] ir-kbd-i2c: i2c IR (i2c IR (EM28XX Pinnacle detected at i2c-17/17-0047/ir0 [em28xx #0]
[ 44.079894] em28xx #0: Identified as Pinnacle PCTV USB 2 (card=3)
[ 44.086509] BUG: unable to handle kernel paging request at ffff880478a16ff8
[ 44.087061] IP: [<ffffffff81436cf1>] ir_g_keycode_from_table+0x4d/0xb1
[ 44.087061] PGD 1c04063 PUD 0
[ 44.087061] Oops: 0000 [#1] SMP
[ 44.087061] last sysfs file: /sys/devices/virtual/rc/rc0/input4/capabilities/sw
[ 44.087061] CPU 1
[ 44.087061] Modules linked in: [last unloaded: scsi_wait_scan]
[ 44.087061]
[ 44.087061] Pid: 494, comm: kworker/1:1 Not tainted 2.6.36+ #2 P5Q-EM DO/System Product Name
[ 44.087061] RIP: 0010:[<ffffffff81436cf1>] [<ffffffff81436cf1>] ir_g_keycode_from_table+0x4d/0xb1
[ 44.087061] RSP: 0000:ffff880079d61da0 EFLAGS: 00010817
[ 44.087061] RAX: 000000007fffffff RBX: ffff880078a72800 RCX: 0000000000000000
[ 44.087061] RDX: 000000007fffffff RSI: 0000000000000282 RDI: 00000000ffffffff
[ 44.157005] RBP: ffff880079d61dc0 R08: ffff880078a17000 R09: 0000000000000029
[ 44.157005] R10: ffff880079d61db0 R11: dead000000200200 R12: ffff880078a729b0
[ 44.157005] R13: 0000000000000000 R14: ffff880078a70c00 R15: ffff88007ca96700
[ 44.157005] FS: 0000000000000000(0000) GS:ffff88007ca80000(0000) knlGS:0000000000000000
[ 44.157005] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 44.157005] CR2: ffff880478a16ff8 CR3: 00000000780c3000 CR4: 00000000000406e0
[ 44.157005] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 44.157005] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 44.157005] Process kworker/1:1 (pid: 494, threadinfo ffff880079d60000, task ffff88007c3d9650)
[ 44.157005] Stack:
[ 44.157005] ffff880078a72800 0000000000000000 0000000000000064 ffff880078a70c00
[ 44.157005] <0> ffff880079d61e10 ffffffff81436f51 ffff880079d61e10 ffffffff81459259
[ 44.157005] <0> 0000000000000000 ffff880078bf1140 ffff880078bf1100 0000000000000064
[ 44.157005] Call Trace:
[ 44.157005] [<ffffffff81436f51>] ir_keydown+0x34/0x138
[ 44.157005] [<ffffffff81459259>] ? em28xx_get_key_pinnacle_usb_grey+0x28/0xa3
[ 44.157005] [<ffffffff8145cbda>] ir_work+0x99/0xb6
[ 44.157005] [<ffffffff8105fb52>] process_one_work+0x1d5/0x2d2
[ 44.157005] [<ffffffff8145cb41>] ? ir_work+0x0/0xb6
[ 44.157005] [<ffffffff8105ff2d>] worker_thread+0x146/0x277
[ 44.157005] [<ffffffff8105fde7>] ? worker_thread+0x0/0x277
[ 44.157005] [<ffffffff810645f7>] kthread+0x81/0x89
[ 44.157005] [<ffffffff8100bae4>] kernel_thread_helper+0x4/0x10
[ 44.157005] [<ffffffff81064576>] ? kthread+0x0/0x89
[ 44.157005] [<ffffffff8100bae0>] ? kernel_thread_helper+0x0/0x10
[ 44.157005] Code: 00 00 48 89 c3 4c 89 e7 e8 a5 5e 20 00 44 8b 8b 94 01 00 00 4c 8b 83 88 01 00 00 48 89 c6 31 c9 41
8d 79 ff 8d 14 0f d1 ea 89 d0 <45> 39 2c c0 73 05 8d 4a 01 eb 0c 77 07 44 39 ca 72 0b eb 10 8d
[ 44.157005] RIP [<ffffffff81436cf1>] ir_g_keycode_from_table+0x4d/0xb1
[ 44.157005] RSP <ffff880079d61da0>
[ 44.157005] CR2: ffff880478a16ff8
[ 44.157005] ---[ end trace 2988a93430a1c9ca ]---
[ 44.351618] BUG: unable to handle kernel paging request at fffffffffffffff8
[ 44.352583] IP: [<ffffffff81064258>] kthread_data+0xb/0x11
[ 44.352583] PGD 1c05067 PUD 1c06067 PMD 0
[ 44.352583] Oops: 0000 [#2] SMP
[ 44.352583] last sysfs file: /sys/devices/virtual/rc/rc0/input4/capabilities/sw
[ 44.352583] CPU 1
[ 44.352583] Modules linked in: [last unloaded: scsi_wait_scan]
[ 44.352583]
[ 44.352583] Pid: 494, comm: kworker/1:1 Tainted: G D 2.6.36+ #2 P5Q-EM DO/System Product Name
[ 44.352583] RIP: 0010:[<ffffffff81064258>] [<ffffffff81064258>] kthread_data+0xb/0x11
[ 44.352583] RSP: 0000:ffff880079d61908 EFLAGS: 00010096
[ 44.352583] RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88007c3d9650
[ 44.352583] RDX: 0000000000000040 RSI: 0000000000000001 RDI: ffff88007c3d9650
[ 44.352583] RBP: ffff880079d61908 R08: ffff88007ca96380 R09: ffff880079d15958
[ 44.352583] R10: dead000000200200 R11: 0000000000000000 R12: ffff880079d61a18
[ 44.352583] R13: ffff88007ca93200 R14: ffff88007c380000 R15: ffff88007c3d98d0
[ 44.352583] FS: 0000000000000000(0000) GS:ffff88007ca80000(0000) knlGS:0000000000000000
[ 44.352583] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 44.352583] CR2: fffffffffffffff8 CR3: 0000000001c03000 CR4: 00000000000406e0
[ 44.352583] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 44.352583] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 44.352583] Process kworker/1:1 (pid: 494, threadinfo ffff880079d60000, task ffff88007c3d9650)
[ 44.352583] Stack:
[ 44.352583] ffff880079d61928 ffffffff81061820 ffff88007c3ebba0 ffff880079d61fd8
[ 44.352583] <0> ffff880079d619e8 ffffffff8163b347 ffff88007ca8fa60 ffff880079d60010
[ 44.352583] <0> 0000000000013200 ffff880079d61fd8 ffff880079d61fd8 0000000000013200
[ 44.352583] Call Trace:
[ 44.352583] [<ffffffff81061820>] wq_worker_sleeping+0x10/0x8f
[ 44.352583] [<ffffffff8163b347>] schedule+0x1c5/0x67a
[ 44.352583] [<ffffffff810688e6>] ? switch_task_namespaces+0x18/0x4c
[ 44.352583] [<ffffffff8104df71>] do_exit+0x7dc/0x7ea
[ 44.352583] [<ffffffff8163e029>] oops_end+0xc7/0xcf
[ 44.352583] [<ffffffff81032ed3>] no_context+0x1f3/0x202
[ 44.352583] [<ffffffff810f169a>] ? virt_to_head_page+0x9/0x30
[ 44.352583] [<ffffffff8103309d>] __bad_area_nosemaphore+0x1bb/0x1e1
[ 44.352583] [<ffffffff813e3ed2>] ? urb_destroy+0x23/0x27
[ 44.352583] [<ffffffff811f92b2>] ? kref_put+0x43/0x4f
[ 44.352583] [<ffffffff813e3c22>] ? usb_free_urb+0x15/0x17
[ 44.352583] [<ffffffff813e4c8f>] ? usb_start_wait_urb+0x12b/0x13a
[ 44.352583] [<ffffffff810f2bc1>] ? __kmalloc+0x160/0x16f
[ 44.352583] [<ffffffff810f169a>] ? virt_to_head_page+0x9/0x30
[ 44.352583] [<ffffffff810330d1>] bad_area_nosemaphore+0xe/0x10
[ 44.352583] [<ffffffff8164056d>] do_page_fault+0x238/0x43b
[ 44.352583] [<ffffffff81457832>] ? em28xx_read_reg_req_len+0x133/0x18e
[ 44.352583] [<ffffffff814578ab>] ? em28xx_read_reg_req+0x1e/0x28
[ 44.352583] [<ffffffff8163d415>] page_fault+0x25/0x30
[ 44.352583] [<ffffffff81436cf1>] ? ir_g_keycode_from_table+0x4d/0xb1
[ 44.352583] [<ffffffff81436f51>] ir_keydown+0x34/0x138
[ 44.352583] [<ffffffff81459259>] ? em28xx_get_key_pinnacle_usb_grey+0x28/0xa3
[ 44.352583] [<ffffffff8145cbda>] ir_work+0x99/0xb6
[ 44.352583] [<ffffffff8105fb52>] process_one_work+0x1d5/0x2d2
[ 44.352583] [<ffffffff8145cb41>] ? ir_work+0x0/0xb6
[ 44.352583] [<ffffffff8105ff2d>] worker_thread+0x146/0x277
[ 44.352583] [<ffffffff8105fde7>] ? worker_thread+0x0/0x277
[ 44.352583] [<ffffffff810645f7>] kthread+0x81/0x89
[ 44.352583] [<ffffffff8100bae4>] kernel_thread_helper+0x4/0x10
[ 44.352583] [<ffffffff81064576>] ? kthread+0x0/0x89
[ 44.352583] [<ffffffff8100bae0>] ? kernel_thread_helper+0x0/0x10
[ 44.352583] Code: 41 5d 41 5e c9 c3 90 55 65 48 8b 04 25 40 cc 00 00 48 8b 80 20 03 00 00 48 89 e5 8b 40 f0 c9 c3 48
8b 87 20 03 00 00 55 48 89 e5 <48> 8b 40 f8 c9 c3 55 48 83 c7 40 48 89 e5 e8 71 9f fd ff c9 c3
[ 44.352583] RIP [<ffffffff81064258>] kthread_data+0xb/0x11
[ 44.352583] RSP <ffff880079d61908>
[ 44.352583] CR2: fffffffffffffff8
[ 44.352583] ---[ end trace 2988a93430a1c9cb ]---
[ 44.352583] Fixing recursive fault but reboot is needed!
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.36+ (root@xentest) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #2 SMP Wed Oct 27 13:32:09 C
EST 2010
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.36+ root=UUID=d200160d-e621-4cb4-a75d-702a5abc454e ro console=
ttyS0,115200
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007cd70000 (usable)
[ 0.000000] BIOS-e820: 000000007cd70000 - 000000007cd7e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007cd7e000 - 000000007cdd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007cdd0000 - 000000007ce00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01100 (reserved)
[ 0.000000] BIOS-e820: 00000000fed02000 - 00000000fed14c00 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed40000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7cd70 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] init_memory_mapping: 0000000000000000-000000007cd70000
[ 0.000000] RAMDISK: 37cfe000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fb080 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 000000007cd70100 00054 (v01 A_M_I_ OEMXSDT 05001025 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007cd70290 000F4 (v03 A_M_I_ OEMFACP 05001025 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007cd70440 0841F (v01 A1065 A1065000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 000000007cd7e000 00040
[ 0.000000] ACPI: APIC 000000007cd70390 0006C (v01 A_M_I_ OEMAPIC 05001025 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007cd70400 0003C (v01 A_M_I_ OEMMCFG 05001025 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000007cd7e040 00089 (v01 A_M_I_ AMI_OEM 05001025 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000007cd78860 00038 (v01 A_M_I_ OEMHPET 05001025 MSFT 00000097)
[ 0.000000] ACPI: GSCI 000000007cd7e0d0 02024 (v01 A_M_I_ GMCHSCI 05001025 MSFT 00000097)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007cd70000
[ 0.000000] Initmem setup node 0 0000000000000000-000000007cd70000
[ 0.000000] NODE_DATA [000000007cd6b000 - 000000007cd6ffff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007cd70
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7ce00000 (gap: 7ce00000:81f00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007ca00000 s81472 r8192 d20928 u524288
[ 0.000000] pcpu-alloc: s81472 r8192 d20928 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 504232
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.36+ root=UUID=d200160d-e621-4cb4-a75d-702a5abc454e ro c
onsole=ttyS0,115200
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 1997768k/2045376k available (6424k kernel code, 456k absent, 47152k reserved, 6818k data, 696k in
it)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2666.101 MHz processor.
[ 0.002007] Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.20 BogoMIPS (lpj=2666101)
[ 0.004002] pid_max: default: 32768 minimum: 301
[ 0.005018] Security Framework initialized
[ 0.006004] SELinux: Initializing.
[ 0.008095] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.010317] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.011501] Mount-cache hash table entries: 256
[ 0.012141] Initializing cgroup subsys ns
[ 0.013005] Initializing cgroup subsys cpuacct
[ 0.015004] Initializing cgroup subsys freezer
[ 0.016026] CPU: Physical Processor ID: 0
[ 0.017002] CPU: Processor Core ID: 0
[ 0.018002] mce: CPU supports 6 MCE banks
[ 0.019007] CPU0: Thermal monitoring enabled (TM2)
[ 0.020003] using mwait in idle threads.
[ 0.021002] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.025004] ... version: 2
[ 0.026001] ... bit width: 40
[ 0.027001] ... generic registers: 2
[ 0.028002] ... value mask: 000000ffffffffff
[ 0.029002] ... max period: 000000007fffffff
[ 0.030001] ... fixed-purpose events: 3
[ 0.031002] ... event mask: 0000000700000003
[ 0.033929] ACPI: Core revision 20101013
[ 0.041914] Setting APIC routing to flat
[ 0.043143] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.054141] CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
[ 0.057999] Booting Node 0, Processors #1 #2 #3 Ok.
[ 0.274006] Brought up 4 CPUs
[ 0.275001] Total of 4 processors activated (21329.78 BogoMIPS).
[ 0.277067] kworker/u:0 used greatest stack depth: 5944 bytes left
[ 0.284075] Time: 11:57:47 Date: 10/27/10
[ 0.285032] NET: Registered protocol family 16
[ 0.287017] ACPI: bus type pci registered
[ 0.288025] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.289003] PCI: not using MMCONFIG
[ 0.290001] PCI: Using configuration type 1 for base access
[ 0.301157] bio: create slab <bio-0> at 0
[ 0.304723] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.311257] ACPI: Interpreter enabled
[ 0.312002] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.315003] ACPI: Using IOAPIC for interrupt routing
[ 0.316032] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.318705] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.342113] ACPI: No dock devices found.
[ 0.343003] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.344112] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.346020] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.347002] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.348001] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.349002] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.350002] pci_root PNP0A08:00: host bridge window [mem 0x7ce00000-0xdfffffff]
[ 0.351002] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff]
[ 0.354115] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.357015] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.358195] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.359009] pci 0000:00:1c.4: PCI bridge to [bus 01-01]
[ 0.360068] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.372426] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.376046] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.380338] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.384614] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.387894] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.391044] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.395337] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.398614] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.402024] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.403011] vgaarb: loaded
[ 0.404073] SCSI subsystem initialized
[ 0.406017] usbcore: registered new interface driver usbfs
[ 0.407016] usbcore: registered new interface driver hub
[ 0.408012] usbcore: registered new device driver usb
[ 0.409017] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 0.410002] PCI: Using ACPI for IRQ routing
[ 0.412159] cfg80211: Calling CRDA to update world regulatory domain
[ 0.413137] NetLabel: Initializing
[ 0.414001] NetLabel: domain hash size = 128
[ 0.415000] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.416010] NetLabel: unlabeled traffic allowed by default
[ 0.417066] HPET: 8 timers in total, 4 timers will be used for per-cpu timer
[ 0.418006] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 0, 0
[ 0.422001] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.762003] Switching to clocksource tsc
[ 0.766415] pnp: PnP ACPI init
[ 0.769485] ACPI: bus type pnp registered
[ 0.776384] pnp: PnP ACPI: found 18 devices
[ 0.780570] ACPI: ACPI bus type pnp unregistered
[ 0.785194] system 00:01: [mem 0xfed14000-0xfed19fff] could not be reserved
[ 0.792150] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.798767] system 00:07: [io 0x0290-0x029f] has been reserved
[ 0.804685] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.810604] system 00:08: [io 0x0800-0x087f] has been reserved
[ 0.816522] system 00:08: [io 0x0500-0x057f] has been reserved
[ 0.822443] system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.829056] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.835670] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.842283] system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.848898] system 00:0b: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.855511] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.862469] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.869085] system 00:10: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.875698] system 00:11: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.882656] system 00:11: [mem 0x000c0000-0x000cffff] has been reserved
[ 0.889269] system 00:11: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.896230] system 00:11: [mem 0x00100000-0x7cdfffff] could not be reserved
[ 0.903190] system 00:11: [mem 0xe0000000-0xffffffff] could not be reserved
[ 0.918118] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.923342] pci 0000:00:1c.0: bridge window [io disabled]
[ 0.929002] pci 0000:00:1c.0: bridge window [mem disabled]
[ 0.934662] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.942404] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.947627] pci 0000:00:1c.1: bridge window [io disabled]
[ 0.953289] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.960074] pci 0000:00:1c.1: bridge window [mem pref disabled]
[ 0.966168] pci 0000:00:1c.4: PCI bridge to [bus 01-01]
[ 0.971393] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.977489] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.984274] pci 0000:00:1c.4: bridge window [mem pref disabled]
[ 0.990369] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.995593] pci 0000:00:1e.0: bridge window [io disabled]
[ 1.001254] pci 0000:00:1e.0: bridge window [mem disabled]
[ 1.006913] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 1.013021] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.019727] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.026433] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.033204] NET: Registered protocol family 2
[ 1.037649] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.045368] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 1.054492] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.061692] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.068305] TCP reno registered
[ 1.071458] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.077475] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.084053] NET: Registered protocol family 1
[ 1.088541] RPC: Registered udp transport module.
[ 1.093242] RPC: Registered tcp transport module.
[ 1.097947] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.104817] Trying to unpack rootfs image as initramfs...
[ 1.161283] Freeing initrd memory: 3016k freed
[ 1.168428] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
[ 1.174442] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
[ 1.180447] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
[ 1.186454] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
[ 1.192502] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 1.201282] Scanning for low memory corruption every 60 seconds
[ 1.207448] audit: initializing netlink socket (disabled)
[ 1.212858] type=2000 audit(1288180667.211:1): initialized
[ 1.229319] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.239020] VFS: Disk quotas dquot_6.5.2
[ 1.243095] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.250312] msgmni has been set to 3907
[ 1.254633] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.262024] io scheduler noop registered
[ 1.265952] io scheduler deadline registered
[ 1.270283] io scheduler cfq registered (default)
[ 1.275198] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.281056] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.289226] ACPI: Power Button [PWRB]
[ 1.292954] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.300345] ACPI: Power Button [PWRF]
[ 1.306524] xenfs: not registering filesystem on non-xen platform
[ 1.312877] Non-volatile memory driver v1.3
[ 1.317065] Linux agpgart interface v0.103
[ 1.321262] agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset
[ 1.327055] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 1.335998] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 1.346573] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.353474] [drm] Initialized drm 1.1.0 20060810
[ 1.358115] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.395446] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.573483] Console: switching to colour frame buffer device 128x48
[ 1.581423] fb0: inteldrmfb frame buffer device
[ 1.585955] drm: registered panic notifier
[ 1.590055] No ACPI video bus found
[ 1.593639] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.600834] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
ÿ[ 1.871111] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.961675] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.982181] brd: module loaded
[ 1.986242] loop: module loaded
[ 1.989710] ahci 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 1.996551] ahci: SSS flag set, parallel bus scan disabled
[ 2.002060] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 2.010233] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems sxs
[ 2.029101] scsi0 : ahci
[ 2.031788] scsi1 : ahci
[ 2.034458] scsi2 : ahci
[ 2.037146] scsi3 : ahci
[ 2.039810] scsi4 : ahci
[ 2.042472] scsi5 : ahci
[ 2.045221] ata1: SATA max UDMA/133 abar m2048@0xfe8f2000 port 0xfe8f2100 irq 45
[ 2.052615] ata2: SATA max UDMA/133 abar m2048@0xfe8f2000 port 0xfe8f2180 irq 45
[ 2.060009] ata3: SATA max UDMA/133 abar m2048@0xfe8f2000 port 0xfe8f2200 irq 45
[ 2.067402] ata4: SATA max UDMA/133 abar m2048@0xfe8f2000 port 0xfe8f2280 irq 45
[ 2.074794] ata5: SATA max UDMA/133 abar m2048@0xfe8f2000 port 0xfe8f2300 irq 45
[ 2.082189] ata6: SATA max UDMA/133 abar m2048@0xfe8f2000 port 0xfe8f2380 irq 45
[ 2.089947] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-NAPI
[ 2.096993] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 2.102788] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2
[ 2.108701] e1000e: Copyright (c) 1999 - 2010 Intel Corporation.
[ 2.114720] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.277235] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:23:54:9a:46:ea
[ 2.285235] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 2.292241] e1000e 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: ffffff-0ff
[ 2.299076] Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2
[ 2.305690] Copyright (c) 2007-2009 Intel Corporation.
[ 2.310877] Intel(R) Virtual Function Network Driver - version 1.0.0-k0
[ 2.317484] Copyright (c) 2009 Intel Corporation.
[ 2.322411] jme: JMicron JMC2XX ethernet driver version 1.0.7
[ 2.328204] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 2.334292] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.339954] ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
[ 2.346878] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.6 (Oct 12, 2010)
[ 2.354173] sky2: driver version 1.28
[ 2.358293] console [netcon0] enabled
[ 2.361959] netconsole: network logging started
[ 2.366753] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.373300] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.380441] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.385747] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.398033] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.406476] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe8f9000
[ 2.422009] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.427788] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.434576] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.441795] usb usb1: Product: EHCI Host Controller
[ 2.446674] usb usb1: Manufacturer: Linux 2.6.36+ ehci_hcd
[ 2.452154] usb usb1: SerialNumber: 0000:00:1a.7
[ 2.456914] hub 1-0:1.0: USB hub found
[ 2.460668] hub 1-0:1.0: 6 ports detected
[ 2.464755] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.471899] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.477187] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.489034] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.497454] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8f8000
[ 2.512009] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.517767] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.524552] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.531773] usb usb2: Product: EHCI Host Controller
[ 2.536653] usb usb2: Manufacturer: Linux 2.6.36+ ehci_hcd
[ 2.542139] usb usb2: SerialNumber: 0000:00:1d.7
[ 2.546898] hub 2-0:1.0: USB hub found
[ 2.549034] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.556830] hub 2-0:1.0: 6 ports detected
[ 2.556891] ata1.00: ATA-7: WDC WD800JD-60MSA1, 10.01E01, max UDMA/100
[ 2.556893] ata1.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.557456] ata1.00: configured for UDMA/100
[ 2.557567] scsi 0:0:0:0: Direct-Access ATA WDC WD800JD-60MS 10.0 PQ: 0 ANSI: 5
[ 2.557776] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.557820] sd 0:0:0:0: [sda] Write Protect is off
[ 2.557840] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.557886] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.592841] sda: sda1 sda2 < sda5 >
[ 2.617235] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.617363] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.628081] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.634513] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.641648] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.646937] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.660009] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 2.664914] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d400
[ 2.670690] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.677475] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.684694] usb usb3: Product: UHCI Host Controller
[ 2.689572] usb usb3: Manufacturer: Linux 2.6.36+ uhci_hcd
[ 2.695050] usb usb3: SerialNumber: 0000:00:1a.0
[ 2.699799] hub 3-0:1.0: USB hub found
[ 2.703549] hub 3-0:1.0: 2 ports detected
[ 2.707631] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.714768] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.720076] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.732008] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 2.736905] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d480
[ 2.742673] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.749459] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.756678] usb usb4: Product: UHCI Host Controller
[ 2.761557] usb usb4: Manufacturer: Linux 2.6.36+ uhci_hcd
[ 2.767044] usb usb4: SerialNumber: 0000:00:1a.1
[ 2.771802] hub 4-0:1.0: USB hub found
[ 2.775558] hub 4-0:1.0: 2 ports detected
[ 2.779629] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.786768] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.792066] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 2.804009] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 2.808914] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000d800
[ 2.814702] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.821485] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.828705] usb usb5: Product: UHCI Host Controller
[ 2.833585] usb usb5: Manufacturer: Linux 2.6.36+ uhci_hcd
[ 2.839070] usb usb5: SerialNumber: 0000:00:1a.2
[ 2.843824] hub 5-0:1.0: USB hub found
[ 2.847575] hub 5-0:1.0: 2 ports detected
[ 2.851651] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.858787] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.862024] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.869467] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 2.881009] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 2.885904] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000cc00
[ 2.891678] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.898461] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.905680] usb usb6: Product: UHCI Host Controller
[ 2.910559] usb usb6: Manufacturer: Linux 2.6.36+ uhci_hcd
[ 2.916037] usb usb6: SerialNumber: 0000:00:1d.0
[ 2.920788] hub 6-0:1.0: USB hub found
[ 2.924543] hub 6-0:1.0: 2 ports detected
[ 2.928617] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.935754] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.941046] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 2.953008] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 2.957933] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000
[ 2.963705] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.970490] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.977706] usb usb7: Product: UHCI Host Controller
[ 2.982577] usb usb7: Manufacturer: Linux 2.6.36+ uhci_hcd
[ 2.988057] usb usb7: SerialNumber: 0000:00:1d.1
[ 2.992815] hub 7-0:1.0: USB hub found
[ 2.996571] hub 7-0:1.0: 2 ports detected
[ 3.000646] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.007782] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.013065] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 3.025009] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 3.029917] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d080
[ 3.035698] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.042480] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.049699] usb usb8: Product: UHCI Host Controller
[ 3.054571] usb usb8: Manufacturer: Linux 2.6.36+ uhci_hcd
[ 3.060059] usb usb8: SerialNumber: 0000:00:1d.2
[ 3.064808] hub 8-0:1.0: USB hub found
[ 3.068563] hub 8-0:1.0: 2 ports detected
[ 3.072694] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.079833] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 3.085122] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[ 3.097145] xhci_hcd 0000:02:00.0: irq 17, io mem 0xfebfe000
[ 3.102969] usb usb9: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum v
alues
[ 3.114008] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.120790] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.128010] usb usb9: Product: xHCI Host Controller
[ 3.132883] usb usb9: Manufacturer: Linux 2.6.36+ xhci_hcd
[ 3.138369] usb usb9: SerialNumber: 0000:02:00.0
[ 3.143133] hub 9-0:1.0: USB hub found
[ 3.146884] hub 9-0:1.0: 4 ports detected
[ 3.151083] usbcore: registered new interface driver usblp
[ 3.156570] Initializing USB Mass Storage driver...
[ 3.161511] usbcore: registered new interface driver usb-storage
[ 3.167023] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.172910] USB Mass Storage support registered.
[ 3.177615] usbcore: registered new interface driver libusual
[ 3.188107] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 3.198244] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.203213] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.208373] mice: PS/2 mouse device common for all mice
[ 3.213829] rtc_cmos 00:03: RTC can wake from S4
[ 3.223076] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 3.229197] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.236061] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.243374] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x0400-0x040f disabl
ed]
[ 3.254241] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.254316] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 3.273134] lirc_dev: IR Remote Control driver registered, major 250
[ 3.279576] IR NEC protocol handler initialized
[ 3.284118] IR RC5(x) protocol handler initialized
[ 3.288911] IR RC6 protocol handler initialized
[ 3.293444] IR JVC protocol handler initialized
[ 3.297977] IR Sony protocol handler initialized
[ 3.302605] IR LIRC bridge handler initialized
[ 3.307051] Linux video capture interface: v2.00
[ 3.311960] usbcore: registered new interface driver em28xx
[ 3.317533] em28xx driver loaded
[ 3.320773] Em28xx: Initialized (Em28xx Audio Extension) extension
[ 3.327304] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@xxxxxxxxxx
[ 3.335823] cpuidle: using governor ladder
[ 3.339923] cpuidle: using governor menu
[ 3.344846] usbcore: registered new interface driver usbhid
[ 3.350424] usbhid: USB HID core driver
modprobe: FATAL: Could not load /lib/modules/2.6.36+/modules.dep: No such file or directory
[ 3.366135] modprobe used greatest stack depth: 5464 bytes left
[ 3.372163] ALSA device list:
[ 3.375131] No soundcards found.
[ 3.378581] Netfilter messages via NETLINK v0.30.
[ 3.383307] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 3.389607] ctnetlink v0.93: registering with nfnetlink.
[ 3.395325] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.400670] TCP cubic registered
[ 3.403898] Initializing XFRM netlink socket
[ 3.408413] NET: Registered protocol family 10
[ 3.413516] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.418954] IPv6 over IPv4 tunneling driver
[ 3.423642] NET: Registered protocol family 17
[ 3.428102] Registering the dns_resolver key type
[ 3.433022] registered taskstats version 1
[ 3.437374] Magic number: 14:661:985
[ 3.472014] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.488290] logips2pp: Detected unknown logitech mouse model 57
[ 3.782013] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.960905] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[ 4.092014] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.097434] Freeing unused kernel memory: 696k freed
[ 4.102575] Write protecting the kernel read-only data: 12288k
[ 4.108621] Freeing unused kernel memory: 1748k freed
[ 4.114250] Freeing unused kernel memory: 1520k freed
Loading, please wait...
[ 4.127871] all_generic_ide used greatest stack depth: 5416 bytes left
Couldnt get a file descriptor referring to the console
KDGKBMODE: Bad file descriptor
loadkeys: error reading keyboard mode
Begin: Loading essential drivers [ 4.154594] udevd (1137): /proc/1137/oom_adj is deprecated, please use /proc/1137/oo
m_score_adj instead.
... done.
Begin: Running /scripts/init-premount ... [ 4.370516] vol_id used greatest stack depth: 4984 bytes left
done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-[ 4.544549] PM: Starting manual resume from disk
premount ... kinit: name_to_dev_t(/dev/sda5) = dev(8,5)
kinit: trying to resume from /dev/sda5
kinit: No resume image, doing normal boot...
resume: libgcrypt version: 1.4.1
done.
[ 4.584557] EXT3-fs: barriers not enabled
[ 4.606868] kjournald starting. Commit interval 5 seconds
[ 4.606896] EXT3-fs (sda1): mounted filesystem with writeback data mode
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
SELinux: Could not open policy file <= /etc/selinux/targeted/policy/policy.24: No such file or directory
INIT: version 2.86 booting
[ 5.338231] stty used greatest stack depth: 3984 bytes left
Starting the hotug events dispater: udevd[ 5.931132] uvd version 125 srted
.
Synthesizing thenitial hotplug ents...done.
Waiting f /dev to be fully populated...done.
Setting the system clock.
Activating swap.[ 8.136043] Adding 3229028k swap on /dev/sda5. Priority:-1 extents:1 across:3229028k
done.
Checking root file system...fsck 1.41.3 (12-Oct-2008)
/dev/sda1: clean, 588961/4685824[ 8.397251] EXT3-fs (sda1): files, 15993494using internal journal
/18729774 blocks (check in 4 mounts)
done.
Setting the system clock.
Cleaning up ifupdown....
Loading kernel modules...done.
Checking file syems...fsck 1.41.3 (12-Oct-2008)
done.
Setting kernel variables (/etc/sysctl.conf)...done.
Mounting local filesystems...done.
Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...add bridge failed: Package not installed
Failed to bring up xen_bridge.
done.
Initializing IP Masquerading...done.
Loading IP Masquerade kernel modules...done.
Setting sensors mits[ 10.849367] ARCONF(NETDEV_UP)eth1: link is noready
.
Setting console reen modes and fts.
[ 11.318437] rc used greatest stack depth: 3728 bytes left
INIT: Entering runlevel: 2
Starting enhanced syslogd: rsyslogd.
Starting ACPI services....
Starting system message bus: dbus.
Starting OpenBSD Secure Shell server: sshd[ 12.521861] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control:
RX/TX
[ 12.529348] e1000e 0000:00:19.0: eth1: 10/100 speed: disabling TSO
[ 12.535825] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
.
Starting MTA: exim4.
FATAL: Module kvm_intel not found.
Module kvm_intel failed to load failed!
Setting sysfs variables....
grep: /proc/xen/capabilities: No such file or directory
xencommons should be started first.
Starting Hardwarabstraction laye hald[ 15.981302] Ieth1 OUT= MAC=003:54:9a:46:ea:401:86:f4:67:d8:080 SRC=172.16.1.1ST=
172.16.1.251 N=328 TOS=0x10 PREC=0x00 TTL=1 ID=0 PROTO=UDP T=67 DPT=68 LEN=8
.
Starting DHCP server: dhcpd3check syslog foriagnostics. failed!
failed!
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: crond.
[ 43.628015] u 2-4: new high sed USB device usg ehci_hcd and address 2
[ 43.755974] u 2-4: New USB dece found, idVend=2304, idProduct208
[ 43.7626] usb 2-4: New USB device stris: Mfr=2, Produc1, SerialNumber=
[ 43.769828] b 2-4: Product: PCTV USB2 PAL
[ 43.774013usb 2-4: Manufacturer: Pinnacle Systems GmbH
[ 43.779540] em28xx: New device Pinnacle Systems GmbH PCTV USB2 PAL @ 480 Mbps (2304:0208, interface 0, class 0)
[ 43.789721] em28xx #0: chip ID is em2820 (or em2710)
[ 43.894981] e8xx #0: i2c eepr 00: 1a eb 67 9504 23 08 02 10 001e 03 98 1e 6a 2e
[ 43.903147] em28xx #0: i2c prom 10:
00 00 0 57 6e 00 00 00 8e 00 00 00 07 00 00 00
[ 43.911317] em28xx #0: i2c eeprom 20: 16 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 43.919456] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 01 00 00 00 00 00 00
[ 43.927620] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 43.935751] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 43.943907] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 2e 03 50 00 69 00
[ 43.952066] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
[ 43.960227] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 20 00 47 00
[ 43.968385] em28xx #0: i2c eeprom 90: 6d 00 62 00 48 00 00 00 1e 03 50 00 43 00 54 00
[ 43.976531] em28xx #0: i2c eeprom a0: 56 00 20 00 55 00 53 00 42 00 32 00 20 00 50 00
[ 43.984687] em28xx #0: i2c eeprom b0: 41 00 4c 00 00 00 06 03 31 00 00 00 00 00 00 00
[ 43.992834] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 44.000990] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 44.009143] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 44.017288] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 07 56 d9 35 01 ed 0b f8
[ 44.025436] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x0fd77740
[ 44.031957] em28xx #0: EEPROM info:
[ 44.035449] em28xx #0: AC97 audio (5 sample rates)
[ 44.040241] em28xx #0: 500mA max power
[ 44.043996] em28xx #0: Table at 0x06, strings=0x1e98, 0x2e6a, 0x0000
[ 44.051400] Registered IR keymap rc-pinnacle-grey
[ 44.056170] input: i2c IR (i2c IR (EM28XX Pinnacle as /devices/virtual/rc/rc0/input4
[ 44.063962] rc0: i2c IR (i2c IR (EM28XX Pinnacle as /devices/virtual/rc/rc0
[ 44.070928] ir-kbd-i2c: i2c IR (i2c IR (EM28XX Pinnacle detected at i2c-17/17-0047/ir0 [em28xx #0]
[ 44.079894] em28xx #0: Identified as Pinnacle PCTV USB 2 (card=3)
[ 44.086509] BUG: unable to handle kernel paging request at ffff880478a16ff8
[ 44.087061] IP: [<ffffffff81436cf1>] ir_g_keycode_from_table+0x4d/0xb1
[ 44.087061] PGD 1c04063 PUD 0
[ 44.087061] Oops: 0000 [#1] SMP
[ 44.087061] last sysfs file: /sys/devices/virtual/rc/rc0/input4/capabilities/sw
[ 44.087061] CPU 1
[ 44.087061] Modules linked in: [last unloaded: scsi_wait_scan]
[ 44.087061]
[ 44.087061] Pid: 494, comm: kworker/1:1 Not tainted 2.6.36+ #2 P5Q-EM DO/System Product Name
[ 44.087061] RIP: 0010:[<ffffffff81436cf1>] [<ffffffff81436cf1>] ir_g_keycode_from_table+0x4d/0xb1
[ 44.087061] RSP: 0000:ffff880079d61da0 EFLAGS: 00010817
[ 44.087061] RAX: 000000007fffffff RBX: ffff880078a72800 RCX: 0000000000000000
[ 44.087061] RDX: 000000007fffffff RSI: 0000000000000282 RDI: 00000000ffffffff
[ 44.157005] RBP: ffff880079d61dc0 R08: ffff880078a17000 R09: 0000000000000029
[ 44.157005] R10: ffff880079d61db0 R11: dead000000200200 R12: ffff880078a729b0
[ 44.157005] R13: 0000000000000000 R14: ffff880078a70c00 R15: ffff88007ca96700
[ 44.157005] FS: 0000000000000000(0000) GS:ffff88007ca80000(0000) knlGS:0000000000000000
[ 44.157005] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 44.157005] CR2: ffff880478a16ff8 CR3: 00000000780c3000 CR4: 00000000000406e0
[ 44.157005] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 44.157005] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 44.157005] Process kworker/1:1 (pid: 494, threadinfo ffff880079d60000, task ffff88007c3d9650)
[ 44.157005] Stack:
[ 44.157005] ffff880078a72800 0000000000000000 0000000000000064 ffff880078a70c00
[ 44.157005] <0> ffff880079d61e10 ffffffff81436f51 ffff880079d61e10 ffffffff81459259
[ 44.157005] <0> 0000000000000000 ffff880078bf1140 ffff880078bf1100 0000000000000064
[ 44.157005] Call Trace:
[ 44.157005] [<ffffffff81436f51>] ir_keydown+0x34/0x138
[ 44.157005] [<ffffffff81459259>] ? em28xx_get_key_pinnacle_usb_grey+0x28/0xa3
[ 44.157005] [<ffffffff8145cbda>] ir_work+0x99/0xb6
[ 44.157005] [<ffffffff8105fb52>] process_one_work+0x1d5/0x2d2
[ 44.157005] [<ffffffff8145cb41>] ? ir_work+0x0/0xb6
[ 44.157005] [<ffffffff8105ff2d>] worker_thread+0x146/0x277
[ 44.157005] [<ffffffff8105fde7>] ? worker_thread+0x0/0x277
[ 44.157005] [<ffffffff810645f7>] kthread+0x81/0x89
[ 44.157005] [<ffffffff8100bae4>] kernel_thread_helper+0x4/0x10
[ 44.157005] [<ffffffff81064576>] ? kthread+0x0/0x89
[ 44.157005] [<ffffffff8100bae0>] ? kernel_thread_helper+0x0/0x10
[ 44.157005] Code: 00 00 48 89 c3 4c 89 e7 e8 a5 5e 20 00 44 8b 8b 94 01 00 00 4c 8b 83 88 01 00 00 48 89 c6 31 c9 41
8d 79 ff 8d 14 0f d1 ea 89 d0 <45> 39 2c c0 73 05 8d 4a 01 eb 0c 77 07 44 39 ca 72 0b eb 10 8d
[ 44.157005] RIP [<ffffffff81436cf1>] ir_g_keycode_from_table+0x4d/0xb1
[ 44.157005] RSP <ffff880079d61da0>
[ 44.157005] CR2: ffff880478a16ff8
[ 44.157005] ---[ end trace 2988a93430a1c9ca ]---
[ 44.351618] BUG: unable to handle kernel paging request at fffffffffffffff8
[ 44.352583] IP: [<ffffffff81064258>] kthread_data+0xb/0x11
[ 44.352583] PGD 1c05067 PUD 1c06067 PMD 0
[ 44.352583] Oops: 0000 [#2] SMP
[ 44.352583] last sysfs file: /sys/devices/virtual/rc/rc0/input4/capabilities/sw
[ 44.352583] CPU 1
[ 44.352583] Modules linked in: [last unloaded: scsi_wait_scan]
[ 44.352583]
[ 44.352583] Pid: 494, comm: kworker/1:1 Tainted: G D 2.6.36+ #2 P5Q-EM DO/System Product Name
[ 44.352583] RIP: 0010:[<ffffffff81064258>] [<ffffffff81064258>] kthread_data+0xb/0x11
[ 44.352583] RSP: 0000:ffff880079d61908 EFLAGS: 00010096
[ 44.352583] RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88007c3d9650
[ 44.352583] RDX: 0000000000000040 RSI: 0000000000000001 RDI: ffff88007c3d9650
[ 44.352583] RBP: ffff880079d61908 R08: ffff88007ca96380 R09: ffff880079d15958
[ 44.352583] R10: dead000000200200 R11: 0000000000000000 R12: ffff880079d61a18
[ 44.352583] R13: ffff88007ca93200 R14: ffff88007c380000 R15: ffff88007c3d98d0
[ 44.352583] FS: 0000000000000000(0000) GS:ffff88007ca80000(0000) knlGS:0000000000000000
[ 44.352583] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 44.352583] CR2: fffffffffffffff8 CR3: 0000000001c03000 CR4: 00000000000406e0
[ 44.352583] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 44.352583] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 44.352583] Process kworker/1:1 (pid: 494, threadinfo ffff880079d60000, task ffff88007c3d9650)
[ 44.352583] Stack:
[ 44.352583] ffff880079d61928 ffffffff81061820 ffff88007c3ebba0 ffff880079d61fd8
[ 44.352583] <0> ffff880079d619e8 ffffffff8163b347 ffff88007ca8fa60 ffff880079d60010
[ 44.352583] <0> 0000000000013200 ffff880079d61fd8 ffff880079d61fd8 0000000000013200
[ 44.352583] Call Trace:
[ 44.352583] [<ffffffff81061820>] wq_worker_sleeping+0x10/0x8f
[ 44.352583] [<ffffffff8163b347>] schedule+0x1c5/0x67a
[ 44.352583] [<ffffffff810688e6>] ? switch_task_namespaces+0x18/0x4c
[ 44.352583] [<ffffffff8104df71>] do_exit+0x7dc/0x7ea
[ 44.352583] [<ffffffff8163e029>] oops_end+0xc7/0xcf
[ 44.352583] [<ffffffff81032ed3>] no_context+0x1f3/0x202
[ 44.352583] [<ffffffff810f169a>] ? virt_to_head_page+0x9/0x30
[ 44.352583] [<ffffffff8103309d>] __bad_area_nosemaphore+0x1bb/0x1e1
[ 44.352583] [<ffffffff813e3ed2>] ? urb_destroy+0x23/0x27
[ 44.352583] [<ffffffff811f92b2>] ? kref_put+0x43/0x4f
[ 44.352583] [<ffffffff813e3c22>] ? usb_free_urb+0x15/0x17
[ 44.352583] [<ffffffff813e4c8f>] ? usb_start_wait_urb+0x12b/0x13a
[ 44.352583] [<ffffffff810f2bc1>] ? __kmalloc+0x160/0x16f
[ 44.352583] [<ffffffff810f169a>] ? virt_to_head_page+0x9/0x30
[ 44.352583] [<ffffffff810330d1>] bad_area_nosemaphore+0xe/0x10
[ 44.352583] [<ffffffff8164056d>] do_page_fault+0x238/0x43b
[ 44.352583] [<ffffffff81457832>] ? em28xx_read_reg_req_len+0x133/0x18e
[ 44.352583] [<ffffffff814578ab>] ? em28xx_read_reg_req+0x1e/0x28
[ 44.352583] [<ffffffff8163d415>] page_fault+0x25/0x30
[ 44.352583] [<ffffffff81436cf1>] ? ir_g_keycode_from_table+0x4d/0xb1
[ 44.352583] [<ffffffff81436f51>] ir_keydown+0x34/0x138
[ 44.352583] [<ffffffff81459259>] ? em28xx_get_key_pinnacle_usb_grey+0x28/0xa3
[ 44.352583] [<ffffffff8145cbda>] ir_work+0x99/0xb6
[ 44.352583] [<ffffffff8105fb52>] process_one_work+0x1d5/0x2d2
[ 44.352583] [<ffffffff8145cb41>] ? ir_work+0x0/0xb6
[ 44.352583] [<ffffffff8105ff2d>] worker_thread+0x146/0x277
[ 44.352583] [<ffffffff8105fde7>] ? worker_thread+0x0/0x277
[ 44.352583] [<ffffffff810645f7>] kthread+0x81/0x89
[ 44.352583] [<ffffffff8100bae4>] kernel_thread_helper+0x4/0x10
[ 44.352583] [<ffffffff81064576>] ? kthread+0x0/0x89
[ 44.352583] [<ffffffff8100bae0>] ? kernel_thread_helper+0x0/0x10
[ 44.352583] Code: 41 5d 41 5e c9 c3 90 55 65 48 8b 04 25 40 cc 00 00 48 8b 80 20 03 00 00 48 89 e5 8b 40 f0 c9 c3 48
8b 87 20 03 00 00 55 48 89 e5 <48> 8b 40 f8 c9 c3 55 48 83 c7 40 48 89 e5 e8 71 9f fd ff c9 c3
[ 44.352583] RIP [<ffffffff81064258>] kthread_data+0xb/0x11
[ 44.352583] RSP <ffff880079d61908>
[ 44.352583] CR2: fffffffffffffff8
[ 44.352583] ---[ end trace 2988a93430a1c9cb ]---
[ 44.352583] Fixing recursive fault but reboot is needed!