[PATCHv7 2/3] ARM: mx5: Add gpio-keys to mx51 babbage board

From: Dinh.Nguyen
Date: Sat Oct 23 2010 - 10:11:07 EST


From: Dinh Nguyen <Dinh.Nguyen@xxxxxxxxxxxxx>

Add functionality for the power button on MX51 Babbage board.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@xxxxxxxxxxxxx>
---
arch/arm/configs/mx51_defconfig | 1 +
arch/arm/mach-mx5/board-mx51_babbage.c | 24 ++++++++++++++++++++++++
arch/arm/mach-mx5/devices-imx51.h | 2 ++
3 files changed, 27 insertions(+), 0 deletions(-)

diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig
index 163cfee..5c7a872 100644
--- a/arch/arm/configs/mx51_defconfig
+++ b/arch/arm/configs/mx51_defconfig
@@ -82,6 +82,7 @@ CONFIG_FEC=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
CONFIG_INPUT_EVBUG=m
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ELANTECH=y
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 23ee4a4..276a1fb 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -18,6 +18,8 @@
#include <linux/io.h>
#include <linux/fsl_devices.h>
#include <linux/fec.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>

#include <mach/common.h>
#include <mach/hardware.h>
@@ -37,6 +39,7 @@
#define BABBAGE_USBH1_STP (0*32 + 27) /* GPIO_1_27 */
#define BABBAGE_PHY_RESET (1*32 + 5) /* GPIO_2_5 */
#define BABBAGE_FEC_PHY_RESET (1*32 + 14) /* GPIO_2_14 */
+#define BABBAGE_POWER_KEY (1*32 + 21) /* GPIO_2_21 */

/* USB_CTRL_1 */
#define MX51_USB_CTRL_1_OFFSET 0x10
@@ -46,6 +49,21 @@
#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
#define MX51_USB_PLL_DIV_24_MHZ 0x02

+static struct gpio_keys_button babbage_buttons[] = {
+ {
+ .gpio = BABBAGE_POWER_KEY,
+ .code = BTN_0,
+ .desc = "PWR",
+ .active_low = 1,
+ .wakeup = 1,
+ },
+};
+
+static const struct gpio_keys_platform_data imx_button_data __initconst = {
+ .buttons = babbage_buttons,
+ .nbuttons = ARRAY_SIZE(babbage_buttons),
+};
+
static struct pad_desc mx51babbage_pads[] = {
/* UART1 */
MX51_PAD_UART1_RXD__UART1_RXD,
@@ -281,6 +299,7 @@ __setup("otg_mode=", babbage_otg_mode);
static void __init mxc_board_init(void)
{
struct pad_desc usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
+ struct pad_desc power_key = MX51_PAD_EIM_A27__GPIO_2_21;

mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
ARRAY_SIZE(mx51babbage_pads));
@@ -288,6 +307,11 @@ static void __init mxc_board_init(void)
babbage_fec_reset();
imx51_add_fec(NULL);

+ /* Set the PAD settings for the pwr key. */
+ power_key.pad_ctrl = MX51_GPIO_PAD_CTRL_2;
+ mxc_iomux_v3_setup_pad(&power_key);
+ imx51_add_gpio_keys(&imx_button_data);
+
imx51_add_imx_i2c(0, &babbage_i2c_data);
imx51_add_imx_i2c(1, &babbage_i2c_data);
mxc_register_device(&mxc_hsi2c_device, &babbage_hsi2c_data);
diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h
index 5cc910e..8c50cb5 100644
--- a/arch/arm/mach-mx5/devices-imx51.h
+++ b/arch/arm/mach-mx5/devices-imx51.h
@@ -13,6 +13,8 @@ extern const struct imx_fec_data imx51_fec_data __initconst;
#define imx51_add_fec(pdata) \
imx_add_fec(&imx51_fec_data, pdata)

+#define imx51_add_gpio_keys(pdata) imx_add_gpio_keys(pdata)
+
extern const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst;
#define imx51_add_imx_i2c(id, pdata) \
imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata)
--
1.6.0.4


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/