[PATCH 4/4] x86: OLPC: convert olpc-xo1 driver from pci device toplatform device

From: Andres Salomon
Date: Sat Oct 23 2010 - 03:41:34 EST



The cs5535-mfd driver now takes care of the PCI BAR handling; this
means the olpc-xo1 driver shouldn't be touching the PCI device at all.

This patch uses both cs5535-acpi and cs5535-pms platform devices rather
than a single platform device because the cs5535-mfd driver may be used
by other CS5535 platform-specific drivers; OLPC doesn't get to dictate
that ACPI and PMS will always be used together.

Signed-off-by: Andres Salomon <dilinger@xxxxxxxxxx>
---
arch/x86/Kconfig | 2 +-
arch/x86/kernel/olpc-xo1.c | 101 ++++++++++++++++++++++++--------------------
2 files changed, 56 insertions(+), 47 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index dfabfef..7ad6666 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2038,7 +2038,7 @@ config OLPC

config OLPC_XO1
tristate "OLPC XO-1 support"
- depends on OLPC && PCI
+ depends on OLPC && MFD_CS5535
---help---
Add support for non-essential features of the OLPC XO-1 laptop.

diff --git a/arch/x86/kernel/olpc-xo1.c b/arch/x86/kernel/olpc-xo1.c
index f5442c0..1277756 100644
--- a/arch/x86/kernel/olpc-xo1.c
+++ b/arch/x86/kernel/olpc-xo1.c
@@ -1,6 +1,7 @@
/*
* Support for features of the OLPC XO-1 laptop
*
+ * Copyright (C) 2010 Andres Salomon <dilinger@xxxxxxxxxx>
* Copyright (C) 2010 One Laptop per Child
* Copyright (C) 2006 Red Hat, Inc.
* Copyright (C) 2006 Advanced Micro Devices, Inc.
@@ -12,8 +13,6 @@
*/

#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/pci_ids.h>
#include <linux/platform_device.h>
#include <linux/pm.h>

@@ -22,9 +21,6 @@

#define DRV_NAME "olpc-xo1"

-#define PMS_BAR 4
-#define ACPI_BAR 5
-
/* PMC registers (PMS block) */
#define PM_SCLK 0x10
#define PM_IN_SLPCTL 0x20
@@ -57,65 +53,67 @@ static void xo1_power_off(void)
outl(0x00002000, acpi_base + PM1_CNT);
}

-/* Read the base addresses from the PCI BAR info */
-static int __devinit setup_bases(struct pci_dev *pdev)
+static int __devinit olpc_xo1_probe(struct platform_device *pdev)
{
- int r;
+ struct resource *res;

- r = pci_enable_device_io(pdev);
- if (r) {
- dev_err(&pdev->dev, "can't enable device IO\n");
- return r;
- }
+ /* don't run on non-XOs */
+ if (!machine_is_olpc())
+ return -ENODEV;

- r = pci_request_region(pdev, ACPI_BAR, DRV_NAME);
- if (r) {
- dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", ACPI_BAR);
- return r;
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "can't fetch device resource info\n");
+ return -EIO;
}

- r = pci_request_region(pdev, PMS_BAR, DRV_NAME);
- if (r) {
- dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", PMS_BAR);
- pci_release_region(pdev, ACPI_BAR);
- return r;
+ if (!request_region(res->start, resource_size(res), DRV_NAME)) {
+ dev_err(&pdev->dev, "can't request region\n");
+ return -EIO;
}

- acpi_base = pci_resource_start(pdev, ACPI_BAR);
- pms_base = pci_resource_start(pdev, PMS_BAR);
+ if (strcmp(pdev->name, "cs5535-pms") == 0)
+ pms_base = res->start;
+ else if (strcmp(pdev->name, "cs5535-acpi") == 0)
+ acpi_base = res->start;
+
+ /* If we have both addresses, we can override the poweroff hook */
+ if (pms_base && acpi_base) {
+ pm_power_off = xo1_power_off;
+ printk(KERN_INFO "OLPC XO-1 support registered\n");
+ }

return 0;
}

-static int __devinit olpc_xo1_probe(struct platform_device *pdev)
+static int __devexit olpc_xo1_remove(struct platform_device *pdev)
{
- struct pci_dev *pcidev;
- int r;
-
- pcidev = pci_get_device(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA,
- NULL);
- if (!pdev)
- return -ENODEV;
-
- r = setup_bases(pcidev);
- if (r)
- return r;
+ struct resource *r;

- pm_power_off = xo1_power_off;
+ r = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ release_region(r->start, resource_size(r));

- printk(KERN_INFO "OLPC XO-1 support registered\n");
- return 0;
-}
+ if (strcmp(pdev->name, "cs5535-pms") == 0)
+ pms_base = 0;
+ else if (strcmp(pdev->name, "cs5535-acpi") == 0)
+ acpi_base = 0;

-static int __devexit olpc_xo1_remove(struct platform_device *pdev)
-{
pm_power_off = NULL;
return 0;
}

-static struct platform_driver olpc_xo1_driver = {
+static struct platform_driver cs5535_pms_drv = {
+ .driver = {
+ .name = "cs5535-pms",
+ .owner = THIS_MODULE,
+ },
+ .probe = olpc_xo1_probe,
+ .remove = __devexit_p(olpc_xo1_remove),
+};
+
+static struct platform_driver cs5535_acpi_drv = {
.driver = {
- .name = DRV_NAME,
+ .name = "cs5535-acpi",
.owner = THIS_MODULE,
},
.probe = olpc_xo1_probe,
@@ -124,12 +122,23 @@ static struct platform_driver olpc_xo1_driver = {

static int __init olpc_xo1_init(void)
{
- return platform_driver_register(&olpc_xo1_driver);
+ int r;
+
+ r = platform_driver_register(&cs5535_pms_drv);
+ if (r)
+ return r;
+
+ r = platform_driver_register(&cs5535_acpi_drv);
+ if (r)
+ platform_driver_unregister(&cs5535_pms_drv);
+
+ return r;
}

static void __exit olpc_xo1_exit(void)
{
- platform_driver_unregister(&olpc_xo1_driver);
+ platform_driver_unregister(&cs5535_acpi_drv);
+ platform_driver_unregister(&cs5535_pms_drv);
}

MODULE_AUTHOR("Daniel Drake <dsd@xxxxxxxxxx>");
--
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/