Re: [PATCHv2 1/5] misc: Driver for bh1770glc / sfh7770 ALS and proximitysensor
From: Jonathan Cameron
Date: Fri Oct 08 2010 - 10:29:41 EST
On 10/08/10 14:42, Samu Onkalo wrote:
> This is a driver for ROHM BH1770GLC and OSRAM SFH7770 combined
> ALS and proximity sensor.
>
> Interface is sysfs based. The driver uses interrupts to provide new data.
> The driver supports pm_runtime and regulator frameworks.
>
> See Documentation/misc-devices/bhsfh.txt for details
Couple of nitpicks / formatting suggestions inline.
>
> Signed-off-by: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
> ---
> drivers/misc/bhsfh.c | 1443 +++++++++++++++++++++++++++++++++++++++++++++
> include/linux/i2c/bhsfh.h | 42 ++
> 2 files changed, 1485 insertions(+), 0 deletions(-)
> create mode 100644 drivers/misc/bhsfh.c
> create mode 100644 include/linux/i2c/bhsfh.h
>
> diff --git a/drivers/misc/bhsfh.c b/drivers/misc/bhsfh.c
> new file mode 100644
> index 0000000..e82fadb
> --- /dev/null
> +++ b/drivers/misc/bhsfh.c
> @@ -0,0 +1,1443 @@
> +/*
> + * This file is part of the ROHM BH1770GLC / OSRAM SFH7770 sensor driver.
> + * Chip is combined proximity and ambient light sensor.
> + *
> + * Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
> + *
> + * Contact: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
> + * 02110-1301 USA
> + *
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/mutex.h>
> +#include <linux/i2c/bhsfh.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/workqueue.h>
> +#include <linux/delay.h>
> +#include <linux/wait.h>
> +#include <linux/slab.h>
> +
> +#define BHSFH_ALS_CONTROL 0x80 /* ALS operation mode control */
> +#define BHSFH_PS_CONTROL 0x81 /* PS operation mode control */
> +#define BHSFH_I_LED 0x82 /* active LED and LED1, LED2 current */
> +#define BHSFH_I_LED3 0x83 /* LED3 current setting */
> +#define BHSFH_ALS_PS_MEAS 0x84 /* Forced mode trigger */
> +#define BHSFH_PS_MEAS_RATE 0x85 /* PS meas. rate at stand alone mode */
> +#define BHSFH_ALS_MEAS_RATE 0x86 /* ALS meas. rate at stand alone mode */
> +#define BHSFH_PART_ID 0x8a /* Part number and revision ID */
> +#define BHSFH_MANUFACT_ID 0x8b /* Manufacturerer ID */
> +#define BHSFH_ALS_DATA_0 0x8c /* ALS DATA low byte */
> +#define BHSFH_ALS_DATA_1 0x8d /* ALS DATA high byte */
> +#define BHSFH_ALS_PS_STATUS 0x8e /* Measurement data and int status */
> +#define BHSFH_PS_DATA_LED1 0x8f /* PS data from LED1 */
> +#define BHSFH_PS_DATA_LED2 0x90 /* PS data from LED2 */
> +#define BHSFH_PS_DATA_LED3 0x91 /* PS data from LED3 */
> +#define BHSFH_INTERRUPT 0x92 /* Interrupt setting */
> +#define BHSFH_PS_TH_LED1 0x93 /* PS interrupt threshold for LED1 */
> +#define BHSFH_PS_TH_LED2 0x94 /* PS interrupt threshold for LED2 */
> +#define BHSFH_PS_TH_LED3 0x95 /* PS interrupt threshold for LED3 */
> +#define BHSFH_ALS_TH_UP_0 0x96 /* ALS upper threshold low byte */
> +#define BHSFH_ALS_TH_UP_1 0x97 /* ALS upper threshold high byte */
> +#define BHSFH_ALS_TH_LOW_0 0x98 /* ALS lower threshold low byte */
> +#define BHSFH_ALS_TH_LOW_1 0x99 /* ALS lower threshold high byte */
> +
> +/* MANUFACT_ID */
> +#define BHSFH_MANUFACT_ROHM 0x01
> +#define BHSFH_MANUFACT_OSRAM 0x03
> +
> +/* PART_ID */
> +#define BHSFH_PART 0x90
> +#define BHSFH_PART_MASK 0xf0
> +#define BHSFH_REV_MASK 0x0f
> +#define BHSFH_REV_SHIFT 0
> +#define BHSFH_REV_0 0x00
> +#define BHSFH_REV_1 0x01
> +
> +/* ALS_MEAS_RATE */
> +#define BHSFH_ALS_MAX_RATE 9
> +
> +/* PS_MEAS_RATE */
> +#define BHSFH_PS_MAX_RATE 4
> +
> +/* Operating modes for both */
> +#define BHSFH_STANDBY 0x00
> +#define BHSFH_FORCED 0x02
> +#define BHSFH_STANDALONE 0x03
> +#define BHSFH_SWRESET (0x01 << 2)
> +
> +#define BHSFH_PS_TRIG_MEAS (1 << 0)
> +#define BHSFH_ALS_TRIG_MEAS (1 << 1)
> +
> +/* Interrupt control */
> +#define BHSFH_INT_OUTPUT_MODE (1 << 3) /* 0 = latched */
> +#define BHSFH_INT_POLARITY (1 << 2) /* 1 = active high */
> +#define BHSFH_INT_ALS_ENA (1 << 1)
> +#define BHSFH_INT_PS_ENA (1 << 0)
> +
> +/* Interrupt status */
> +#define BHSFH_INT_LED1_DATA (1 << 0)
> +#define BHSFH_INT_LED1_INT (1 << 1)
> +#define BHSFH_INT_LED2_DATA (1 << 2)
> +#define BHSFH_INT_LED2_INT (1 << 3)
> +#define BHSFH_INT_LED3_DATA (1 << 4)
> +#define BHSFH_INT_LED3_INT (1 << 5)
> +#define BHSFH_INT_LEDS_INT ((1 << 1) | (1 << 3) | (1 << 5))
> +#define BHSFH_INT_ALS_DATA (1 << 6)
> +#define BHSFH_INT_ALS_INT (1 << 7)
> +
> +/* Led channels */
> +#define BHSFH_LED1 0x00
> +
> +#define BHSFH_DISABLE 0
> +#define BHSFH_ENABLE 1
> +#define BHSFH_PROX_CHANNELS 1
> +
> +#define BHSFH_LUX_DEFAULT_RATE 1 /* Index to lux rate table */
> +#define BHSFH_PROX_DEFAULT_RATE 50 /* in Hz */
> +#define BHSFH_PROX_DEF_RATE_THRESH 5 /* in Hz */
> +#define BHSFH_STARTUP_DELAY 50
> +#define BHSFH_RESET_TIME 10
> +#define BHSFH_TIMEOUT 2100 /* Timeout in 2.1 seconds */
> +
> +#define BHSFH_LUX_RANGE 65535
> +#define BHSFH_PROX_RANGE 255
> +#define BHSFH_COEF_SCALER 1024
> +#define BHSFH_CALIB_SCALER 8192
> +#define BHSFH_LUX_NEUTRAL_CALIB_VALUE (1 * BHSFH_CALIB_SCALER)
> +#define BHSFH_LUX_DEF_THRES 1000
> +#define BHSFH_PROX_DEF_THRES 70
> +#define BHSFH_PROX_DEF_ABS_THRES 100
> +#define BHSFH_DEFAULT_PERSISTENCE 10
> +#define BHSFH_PROX_MAX_PERSISTENCE 50
> +#define BHSFH_LUX_GA_SCALE 16384
> +#define BHSFH_LUX_CF_SCALE 2048 /* CF ChipFactor */
> +#define BHSFH_NEUTRAL_CF BHSFH_LUX_CF_SCALE
> +#define BHSFH_LUX_CORR_SCALE 4096
> +
> +#define PROX_ABOVE_THRESHOLD 1
> +#define PROX_BELOW_THRESHOLD 0
> +
> +#define PROX_IGNORE_LUX_LIMIT 500
> +
> +struct bhsfh_chip {
> + struct bhsfh_platform_data *pdata;
> + char chipname[10];
> + u8 revision;
> + struct i2c_client *client;
> + struct regulator_bulk_data regs[2];
> + struct mutex mutex; /* avoid parallel access */
> + wait_queue_head_t wait;
> +
> + bool int_mode_prox;
> + bool int_mode_lux;
> + struct delayed_work prox_work;
> + u32 lux_cf; /* Chip specific factor */
> + u32 lux_ga;
> + u32 lux_calib;
> + int lux_rate_index;
> + u32 lux_corr;
> + u16 lux_data_raw;
> + u16 lux_threshold_hi;
> + u16 lux_threshold_lo;
> + u16 lux_thres_hi_onchip;
> + u16 lux_thres_lo_onchip;
> + bool lux_wait_result;
> +
> + int prox_enable_count;
> + u16 prox_coef;
> + u16 prox_const;
> + int prox_rate;
> + int prox_rate_threshold;
> + u8 prox_persistence;
> + u8 prox_persistence_counter;
> + u8 prox_data;
> + u8 prox_threshold;
> + u8 prox_threshold_hw;
> + bool prox_force_update;
> + u8 prox_abs_thres;
> + u8 prox_led;
Not used as far as I can tell.
> + u8 prox_channels; /* nbr of leds */
> +};
> +
> +static const char reg_vcc[] = "Vcc";
> +static const char reg_vleds[] = "Vleds";
> +
> +/*
> + * Supported stand alone rates in ms from chip data sheet
> + * {10, 20, 30, 40, 70, 100, 200, 500, 1000, 2000};
> + */
> +static const s16 prox_rates_hz[] = {100, 50, 33, 25, 14, 10, 5, 2};
> +static const s16 prox_rates_ms[] = {10, 20, 30, 40, 70, 100, 200, 500};
> +
> +/* Supported IR-led currents in mA */
> +static const u8 prox_curr_ma[] = {5, 10, 20, 50, 100, 150, 200};
> +
> +/*
> + * Supported stand alone rates in ms from chip data sheet
> + * {100, 200, 500, 1000, 2000};
> + */
> +static const s16 lux_rates_hz[] = {10, 5, 2, 1, 0};
> +
> +/*
> + * interrupt control functions are called while keeping chip->mutex
> + * excluding module probe / remove
> + */
> +static inline int bhsfh_lux_interrupt_control(struct bhsfh_chip *chip,
> + int lux)
> +{
> + chip->int_mode_lux = lux;
> + /* Set interrupt modes, interrupt active low, latched */
> + return i2c_smbus_write_byte_data(chip->client,
> + BHSFH_INTERRUPT,
> + (lux << 1) | chip->int_mode_prox);
> +}
> +
> +static inline int bhsfh_prox_interrupt_control(struct bhsfh_chip *chip,
> + int ps)
> +{
> + chip->int_mode_prox = ps;
> + return i2c_smbus_write_byte_data(chip->client,
> + BHSFH_INTERRUPT,
> + (chip->int_mode_lux << 1) | (ps << 0));
> +}
> +
> +/* chip->mutex is always kept here */
> +static int bhsfh_lux_rate(struct bhsfh_chip *chip, int rate_index)
> +{
> + /* sysfs may call this when the chip is powered off */
> + if (pm_runtime_suspended(&chip->client->dev))
> + return 0;
> +
> + /* Proper proximity response needs fastest lux rate (100ms) */
> + if (chip->prox_enable_count)
> + rate_index = 0;
> +
> + return i2c_smbus_write_byte_data(chip->client,
> + BHSFH_ALS_MEAS_RATE,
> + rate_index);
> +}
> +
> +static int bhsfh_prox_rate(struct bhsfh_chip *chip, int mode)
> +{
> + int rate;
> +
> + rate = (mode == PROX_ABOVE_THRESHOLD) ?
> + chip->prox_rate_threshold : chip->prox_rate;
> +
> + return i2c_smbus_write_byte_data(chip->client,
> + BHSFH_PS_MEAS_RATE,
> + rate);
> +}
> +
> +/* InfraredLED is controlled by the chip during proximity scanning */
> +static inline int bhsfh_led_cfg(struct bhsfh_chip *chip)
> +{
> + /* LED cfg, current for leds 1 and 2 */
> + return i2c_smbus_write_byte_data(chip->client,
> + BHSFH_I_LED,
> + (BHSFH_LED1 << 6) |
> + (BHSFH_LED_5mA << 3) |
> + chip->prox_led);
> +}
> +
> +/*
> + * Following two functions converts raw ps values from HW to normalized
> + * values. Purpose is to compensate differences between different sensor
> + * versions and variants so that result means about the same between
> + * versions.
> + */
> +static inline u8 bhsfh_psraw_to_adjusted(struct bhsfh_chip *chip, u8 psraw)
> +{
> + u16 adjusted;
> + adjusted = (u16)(((u32)(psraw + chip->prox_const) * chip->prox_coef) /
> + BHSFH_COEF_SCALER);
> + if (adjusted > BHSFH_PROX_RANGE)
> + adjusted = BHSFH_PROX_RANGE;
> + return adjusted;
> +}
> +
> +static inline u8 bhsfh_psadjusted_to_raw(struct bhsfh_chip *chip, u8 ps)
> +{
> + u16 raw;
> +
> + raw = (((u32)ps * BHSFH_COEF_SCALER) / chip->prox_coef);
> + if (raw > chip->prox_const)
> + raw = raw - chip->prox_const;
> + else
> + raw = 0;
> + return raw;
> +}
> +
> +/*
> + * Following two functions converts raw lux values from HW to normalized
> + * values. Purpose is to compensate differences between different sensor
> + * versions and variants so that result means about the same between
> + * versions. Chip->mutex is kept when this is called.
> + */
> +static int bhsfh_prox_set_threshold(struct bhsfh_chip *chip)
> +{
> + u8 tmp = 0;
> +
> + /* sysfs may call this when the chip is powered off */
> + if (pm_runtime_suspended(&chip->client->dev))
> + return 0;
> +
> + tmp = bhsfh_psadjusted_to_raw(chip, chip->prox_threshold);
> + chip->prox_threshold_hw = tmp;
> +
> + return i2c_smbus_write_byte_data(chip->client, BHSFH_PS_TH_LED1,
> + tmp);
> +}
> +
> +static inline u16 bhsfh_lux_raw_to_adjusted(struct bhsfh_chip *chip, u16 raw)
> +{
> + u32 lux;
> + lux = ((u32)raw * chip->lux_corr) / BHSFH_LUX_CORR_SCALE;
> + return min(lux, (u32)BHSFH_LUX_RANGE);
> +}
> +
> +static inline u16 bhsfh_lux_adjusted_to_raw(struct bhsfh_chip *chip,
> + u16 adjusted)
> +{
> + return (u32)adjusted * BHSFH_LUX_CORR_SCALE / chip->lux_corr;
> +}
> +
> +/* chip->mutex is kept when this is called */
> +static int bhsfh_lux_update_thresholds(struct bhsfh_chip *chip,
> + u16 threshold_hi, u16 threshold_lo)
> +{
> + u8 data[4];
u8 data[4] = { threshold_hi,
threshold_hi >> 8,
threshold_lo,
threshold_low >> 8};
and loose the below will give same result.
> + int ret;
> +
> + /* sysfs may call this when the chip is powered off */
> + if (pm_runtime_suspended(&chip->client->dev))
> + return 0;
> +
> + /*
> + * Compensate threshold values with the correction factors if not
> + * set to minimum or maximum.
> + * Min & max values disables interrupts.
> + */
> + if (threshold_hi != BHSFH_LUX_RANGE && threshold_hi != 0)
> + threshold_hi = bhsfh_lux_adjusted_to_raw(chip, threshold_hi);
> +
> + if (threshold_lo != BHSFH_LUX_RANGE && threshold_lo != 0)
> + threshold_lo = bhsfh_lux_adjusted_to_raw(chip, threshold_lo);
> +
> + if (chip->lux_thres_hi_onchip == threshold_hi &&
> + chip->lux_thres_lo_onchip == threshold_lo)
> + return 0;
> +
> + chip->lux_thres_hi_onchip = threshold_hi;
> + chip->lux_thres_lo_onchip = threshold_lo;
> +
> + data[0] = threshold_hi;
> + data[1] = threshold_hi >> 8;
> + data[2] = threshold_lo;
> + data[3] = threshold_lo >> 8;
> +
> + ret = i2c_smbus_write_i2c_block_data(chip->client,
> + BHSFH_ALS_TH_UP_0,
> + ARRAY_SIZE(data),
> + data);
> + return ret;
> +}
> +
> +static int bhsfh_lux_get_result(struct bhsfh_chip *chip)
> +{
> + u16 data;
> + int ret;
> +
> + ret = i2c_smbus_read_byte_data(chip->client, BHSFH_ALS_DATA_0);
> + if (ret < 0)
> + return ret;
> +
> + data = ret & 0xff;
> + ret = i2c_smbus_read_byte_data(chip->client, BHSFH_ALS_DATA_1);
> + if (ret < 0)
> + return ret;
> +
> + chip->lux_data_raw = data | ((ret & 0xff) << 8);
> +
> + return 0;
> +}
> +
> +/* Calculate correction value which contains chip and device specific parts */
> +static u32 bhsfh_get_corr_value(struct bhsfh_chip *chip)
> +{
> + u32 tmp;
> + /* Impact of glass attenuation correction */
> + tmp = (BHSFH_LUX_CORR_SCALE * chip->lux_ga) / BHSFH_LUX_GA_SCALE;
> + /* Impact of chip factor correction */
> + tmp = (tmp * chip->lux_cf) / BHSFH_LUX_CF_SCALE;
> + /* Impact of Device specific calibration correction */
> + tmp = (tmp * chip->lux_calib) / BHSFH_CALIB_SCALER;
> + return tmp;
> +}
> +
> +static int bhsfh_lux_read_result(struct bhsfh_chip *chip)
> +{
> + bhsfh_lux_get_result(chip);
> + return bhsfh_lux_raw_to_adjusted(chip, chip->lux_data_raw);
> +}
> +
> +/*
> + * Chip on / off functions are called while keeping mutex except probe
> + * or remove phase
> + */
> +static int bhsfh_chip_on(struct bhsfh_chip *chip)
> +{
> + int ret = regulator_bulk_enable(ARRAY_SIZE(chip->regs),
> + chip->regs);
> + if (ret < 0)
> + return ret;
> +
> + usleep_range(BHSFH_STARTUP_DELAY, BHSFH_STARTUP_DELAY * 2);
> +
> + /* Reset the chip */
> + i2c_smbus_write_byte_data(chip->client, BHSFH_ALS_CONTROL,
> + BHSFH_SWRESET);
> + usleep_range(BHSFH_RESET_TIME, BHSFH_RESET_TIME * 2);
> +
> + /*
> + * ALS is started always since proximity needs als results
> + * for realibility estimation.
> + * Let's assume dark until the first ALS measurement is ready.
> + */
> + chip->lux_data_raw = 0;
> + ret = i2c_smbus_write_byte_data(chip->client,
> + BHSFH_ALS_CONTROL, BHSFH_STANDALONE);
> +
> + /* Assume reset defaults */
> + chip->lux_thres_hi_onchip = BHSFH_LUX_RANGE;
> + chip->lux_thres_lo_onchip = 0;
> +
> + return ret;
> +}
> +
> +static void bhsfh_chip_off(struct bhsfh_chip *chip)
> +{
> + i2c_smbus_write_byte_data(chip->client,
> + BHSFH_INTERRUPT, BHSFH_DISABLE);
> + i2c_smbus_write_byte_data(chip->client,
> + BHSFH_ALS_CONTROL, BHSFH_STANDBY);
> + i2c_smbus_write_byte_data(chip->client,
> + BHSFH_PS_CONTROL, BHSFH_STANDBY);
> + regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs);
> +}
> +
> +/* chip->mutex is kept when this is called */
> +static int bhsfh_prox_mode_control(struct bhsfh_chip *chip)
> +{
> + if (chip->prox_enable_count) {
> + chip->prox_force_update = true; /* Force immediate update */
> +
> + bhsfh_lux_rate(chip, chip->lux_rate_index);
> + bhsfh_prox_set_threshold(chip);
> + bhsfh_led_cfg(chip);
> + bhsfh_prox_rate(chip, PROX_BELOW_THRESHOLD);
> + bhsfh_prox_interrupt_control(chip, BHSFH_ENABLE);
> + i2c_smbus_write_byte_data(chip->client,
> + BHSFH_PS_CONTROL, BHSFH_STANDALONE);
> + } else {
> + chip->prox_data = 0;
> + bhsfh_lux_rate(chip, chip->lux_rate_index);
> + bhsfh_prox_interrupt_control(chip, BHSFH_DISABLE);
> + i2c_smbus_write_byte_data(chip->client,
> + BHSFH_PS_CONTROL, BHSFH_STANDBY);
> + }
> + return 0;
> +}
> +
Surely these next two can just return the value and let the caller
say which value it goes in? The code is otherwise identical.
> +static void bhsfh_prox_rate_above(struct bhsfh_chip *chip, int rate)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(prox_rates_hz); i++)
> + if (rate >= prox_rates_hz[i])
> + break;
> +
> + if (i > BHSFH_PS_MAX_RATE)
> + i = BHSFH_PS_MAX_RATE;
> +
> + chip->prox_rate_threshold = i;
> +}
> +
> +static void bhsfh_prox_rate_below(struct bhsfh_chip *chip, int rate)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(prox_rates_hz); i++)
> + if (rate >= prox_rates_hz[i])
> + break;
> +
> + if (i > BHSFH_PS_MAX_RATE)
> + i = BHSFH_PS_MAX_RATE;
> +
> + chip->prox_rate = i;
> +}
> +
> +/* chip->mutex is kept when this is called */
> +static int bhsfh_prox_read_result(struct bhsfh_chip *chip)
> +{
> + int ret;
> + bool above;
> + u8 mode;
> +
> + ret = i2c_smbus_read_byte_data(chip->client, BHSFH_PS_DATA_LED1);
> + if (ret < 0)
> + goto out;
> +
> + if (ret > chip->prox_threshold_hw)
> + above = true;
> + else
> + above = false;
> +
> + /*
> + * when ALS levels goes above limit, proximity result may be
> + * false proximity. Thus ignore the result. With real proximity
> + * there is a shadow causing low als levels.
> + */
> + if (chip->lux_data_raw > PROX_IGNORE_LUX_LIMIT)
> + ret = 0;
> +
> + chip->prox_data = bhsfh_psraw_to_adjusted(chip, ret);
> +
> + /* Strong proximity level or force mode requires immediate response */
> + if (chip->prox_data >= chip->prox_abs_thres ||
> + chip->prox_force_update)
> + chip->prox_persistence_counter = chip->prox_persistence;
> +
> + chip->prox_force_update = false;
> +
> + /* Persistence filttering to reduce false proximity events */
> + if (likely(above)) {
> + if (chip->prox_persistence_counter < chip->prox_persistence) {
> + chip->prox_persistence_counter++;
> + ret = -ENODATA;
> + } else {
> + mode = PROX_ABOVE_THRESHOLD;
> + ret = 0;
> + }
> + } else {
> + chip->prox_persistence_counter = 0;
> + mode = PROX_BELOW_THRESHOLD;
> + chip->prox_data = 0;
> + ret = 0;
> + }
> +
> + /* Set proximity detection rate based on above or below value */
> + if (ret == 0) {
> + bhsfh_prox_rate(chip, mode);
> + sysfs_notify(&chip->client->dev.kobj, NULL, "prox0_raw");
> + }
> +out:
> + return ret;
> +}
> +
> +static int bhsfh_detect(struct bhsfh_chip *chip)
> +{
> + struct i2c_client *client = chip->client;
> + s32 ret;
> + u8 manu, part;
> +
> + ret = i2c_smbus_read_byte_data(client, BHSFH_MANUFACT_ID);
> + if (ret < 0)
> + goto error;
> + manu = (u8)ret;
> +
> + ret = i2c_smbus_read_byte_data(client, BHSFH_PART_ID);
> + if (ret < 0)
> + goto error;
> + part = (u8)ret;
> +
> + chip->revision = (part & BHSFH_REV_MASK) >> BHSFH_REV_SHIFT;
> + chip->prox_coef = BHSFH_COEF_SCALER;
> + chip->prox_const = 0;
> + chip->lux_cf = BHSFH_NEUTRAL_CF;
> +
> + if ((manu == BHSFH_MANUFACT_ROHM) &&
> + ((part & BHSFH_PART_MASK) == BHSFH_PART)) {
> + snprintf(chip->chipname, sizeof(chip->chipname), "BH1770GLC");
> + return 0;
> + }
> +
> + if ((manu == BHSFH_MANUFACT_OSRAM) &&
> + ((part & BHSFH_PART_MASK) == BHSFH_PART)) {
> + snprintf(chip->chipname, sizeof(chip->chipname), "SFH7770");
> + /* Values selected by comparing different versions */
> + chip->prox_coef = 819; /* 0.8 * BHSFH_COEF_SCALER */
> + chip->prox_const = 40;
> + return 0;
> + }
> +
> + ret = -ENODEV;
> +error:
> + dev_dbg(&client->dev, "BHSFH or SFH7770 not found\n");
> +
> + return ret;
> +}
> +
> +/*
> + * This work is re-scheduled at every proximity interrupt.
> + * If this work is running, it means that there hasn't been any
> + * proximity interrupt in time. Situation is handled as no-proximity.
> + * It would be nice to have low-threshold interrupt or interrupt
> + * when measurement and hi-threshold are both 0. But neither of those exists.
> + * This is a workaroud for missing HW feature.
> + */
> +
> +static void bhsfh_prox_work(struct work_struct *work)
> +{
> + struct bhsfh_chip *chip =
> + container_of(work, struct bhsfh_chip, prox_work.work);
> +
> + mutex_lock(&chip->mutex);
> + bhsfh_prox_read_result(chip);
> + mutex_unlock(&chip->mutex);
> +}
> +
> +/* This is threaded irq handler */
> +static irqreturn_t bhsfh_irq(int irq, void *data)
> +{
> + struct bhsfh_chip *chip = data;
> + int status;
> + int rate = 0;
> +
> + mutex_lock(&chip->mutex);
> + status = i2c_smbus_read_byte_data(chip->client, BHSFH_ALS_PS_STATUS);
> +
> + /* Acknowledge interrupt by reading this register */
> + i2c_smbus_read_byte_data(chip->client, BHSFH_INTERRUPT);
> +
> + /*
> + * Check if there is fresh data available for als.
> + * If this is the very first data, update thresholds after that.
> + */
> + if (status & BHSFH_INT_ALS_DATA) {
> + bhsfh_lux_get_result(chip);
> + if (unlikely(chip->lux_wait_result)) {
> + chip->lux_wait_result = false;
> + wake_up(&chip->wait);
> + bhsfh_lux_update_thresholds(chip,
> + chip->lux_threshold_hi,
> + chip->lux_threshold_lo);
> + }
> + }
> +
> + /* Disable interrupt logic to guarantee acknowledgement */
> + i2c_smbus_write_byte_data(chip->client, BHSFH_INTERRUPT,
> + (0 << 1) | (0 << 0));
> +
> + if ((status & BHSFH_INT_ALS_INT))
> + sysfs_notify(&chip->client->dev.kobj, NULL, "lux0_input");
> +
> + if (chip->int_mode_prox)
> + if (status & BHSFH_INT_LEDS_INT) {
Could make the above
if (chip->int && (status & BHSFH_INT_LEDS_INT))
> + rate = prox_rates_ms[chip->prox_rate_threshold];
> + bhsfh_prox_read_result(chip);
> + }
> +
> + /* Re-enable interrupt logic */
> + i2c_smbus_write_byte_data(chip->client, BHSFH_INTERRUPT,
> + (chip->int_mode_lux << 1) |
> + (chip->int_mode_prox << 0));
> + mutex_unlock(&chip->mutex);
> +
> + /*
> + * Can't cancel work while keeping mutex since the work uses the
> + * same mutex.
> + */
> + if (rate) {
> + /*
> + * Simulate missing no-proximity interrupt 50ms after the
> + * next expected interrupt time.
> + */
> + cancel_delayed_work_sync(&chip->prox_work);
> + schedule_delayed_work(&chip->prox_work,
> + msecs_to_jiffies(rate + 50));
> + }
> + return IRQ_HANDLED;
> +}
> +
> +static ssize_t bhsfh_power_state_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct bhsfh_chip *chip = dev_get_drvdata(dev);
> + unsigned long value;
> + size_t ret;
> +
> + if (strict_strtoul(buf, 0, &value))
> + return -EINVAL;
> +
> + mutex_lock(&chip->mutex);
> + if (value) {
> + pm_runtime_get_sync(dev);
> +
> + ret = bhsfh_lux_rate(chip, chip->lux_rate_index);
> + ret |= bhsfh_lux_interrupt_control(chip, BHSFH_ENABLE);
> +
> + if (ret < 0) {
> + pm_runtime_put(dev);
> + goto leave;
> + }
> +
> + /* This causes interrupt after the next measurement cycle */
> + bhsfh_lux_update_thresholds(chip, BHSFH_LUX_DEF_THRES,
> + BHSFH_LUX_DEF_THRES);
> + /* Inform that we are waiting for a result from ALS */
> + chip->lux_wait_result = true;
> + } else {
> + if (!pm_runtime_suspended(dev))
> + pm_runtime_put(dev);
Turn this into an else if statement?
> + }
> + bhsfh_prox_mode_control(chip);
> + ret = count;
> +leave:
> + mutex_unlock(&chip->mutex);
> + return ret;
> +}
> +
> +static ssize_t bhsfh_power_state_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + return sprintf(buf, "%d\n", !pm_runtime_suspended(dev));
> +}
> +
> +static ssize_t bhsfh_lux_result_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct bhsfh_chip *chip = dev_get_drvdata(dev);
> + ssize_t ret;
> + long timeout;
> +
> + if (pm_runtime_suspended(dev))
> + return -EIO; /* Chip is not enabled at all */
> +
> + timeout = wait_event_interruptible_timeout(chip->wait,
> + !chip->lux_wait_result,
> + msecs_to_jiffies(BHSFH_TIMEOUT));
> + if (!timeout)
> + return -EIO;
> +
> + mutex_lock(&chip->mutex);
> + ret = sprintf(buf, "%d\n", bhsfh_lux_read_result(chip));
> + mutex_unlock(&chip->mutex);
> +
> + return ret;
> +}
> +
> +static ssize_t bhsfh_lux_range_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + return sprintf(buf, "%d\n", BHSFH_LUX_RANGE);
> +}
> +
> +static ssize_t bhsfh_prox_enable_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct bhsfh_chip *chip = dev_get_drvdata(dev);
> + unsigned long value;
> +
> + if (strict_strtoul(buf, 0, &value))
> + return -EINVAL;
> +
> + mutex_lock(&chip->mutex);
> + if (value) {
> + /* Assume no proximity. Sensor will tell real state soon */
> + if (!chip->prox_enable_count)
> + chip->prox_data = 0;
> + chip->prox_enable_count++;
> + } else if (chip->prox_enable_count > 0) {
> + chip->prox_enable_count--;
> + } else {
> + goto leave;
> + }
> + /* Run control only when chip is power on */
> + if (!pm_runtime_suspended(dev))
> + bhsfh_prox_mode_control(chip);
> +leave:
> + mutex_unlock(&chip->mutex);
> + return count;
> +}
> +
> +static ssize_t bhsfh_prox_enable_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct bhsfh_chip *chip = dev_get_drvdata(dev);
> + ssize_t len;
> +
> + mutex_lock(&chip->mutex);
> + len = sprintf(buf, "%d\n", chip->prox_enable_count);
> + mutex_unlock(&chip->mutex);
> + return len;
> +}
> +
> +static ssize_t bhsfh_prox_result_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct bhsfh_chip *chip = dev_get_drvdata(dev);
> + ssize_t ret;
> +
> + mutex_lock(&chip->mutex);
> + if (chip->prox_enable_count && !pm_runtime_suspended(dev))
> + ret = sprintf(buf, "%d\n", chip->prox_data);
> + else
> + ret = -EIO;
> + mutex_unlock(&chip->mutex);
> + return ret;
> +}
> +
> +static ssize_t bhsfh_prox_range_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + return sprintf(buf, "%d\n", BHSFH_PROX_RANGE);
> +}
> +
> +static ssize_t bhsfh_get_prox_rate_avail(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + int i;
> + int pos = 0;
> + for (i = 0; i < ARRAY_SIZE(prox_rates_hz); i++)
> + pos += sprintf(buf + pos, "%d ", prox_rates_hz[i]);
> + sprintf(buf + pos - 1, "\n");
> + return pos;
> +}
> +
> +static ssize_t bhsfh_get_prox_rate_above(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct bhsfh_chip *chip = dev_get_drvdata(dev);
> + return sprintf(buf, "%d\n", prox_rates_hz[chip->prox_rate_threshold]);
> +}
> +
> +static ssize_t bhsfh_get_prox_rate_below(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct bhsfh_chip *chip = dev_get_drvdata(dev);
> + return sprintf(buf, "%d\n", prox_rates_hz[chip->prox_rate]);
> +}
> +
> +static ssize_t bhsfh_set_prox_rate_above(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct bhsfh_chip *chip = dev_get_drvdata(dev);
> + unsigned long value;
> +
> + if (strict_strtoul(buf, 0, &value))
> + return -EINVAL;
> +
> + mutex_lock(&chip->mutex);
> + bhsfh_prox_rate_above(chip, value);
> + mutex_unlock(&chip->mutex);
> + return count;
> +}
> +
> +static ssize_t bhsfh_set_prox_rate_below(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct bhsfh_chip *chip = dev_get_drvdata(dev);
> + unsigned long value;
> +
> + if (strict_strtoul(buf, 0, &value))
> + return -EINVAL;
> +
> + mutex_lock(&chip->mutex);
> + bhsfh_prox_rate_below(chip, value);
> + mutex_unlock(&chip->mutex);
> + return count;
> +}
> +
> +static ssize_t bhsfh_get_prox_thres(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct bhsfh_chip *chip = dev_get_drvdata(dev);
> + return sprintf(buf, "%d\n", chip->prox_threshold);
> +}
> +
> +static ssize_t bhsfh_set_prox_thres(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct bhsfh_chip *chip = dev_get_drvdata(dev);
> + unsigned long value;
> + int ret;
> +
> + if (strict_strtoul(buf, 0, &value))
> + return -EINVAL;
> + if (value > BHSFH_PROX_RANGE)
> + return -EINVAL;
> +
> + mutex_lock(&chip->mutex);
> + chip->prox_threshold = value;
> + ret = bhsfh_prox_set_threshold(chip);
> + mutex_unlock(&chip->mutex);
> + if (ret < 0)
> + return ret;
> + return count;
> +}
> +
> +static ssize_t bhsfh_prox_persistence_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct bhsfh_chip *chip = dev_get_drvdata(dev);
> +
> + return snprintf(buf, PAGE_SIZE, "%u\n", chip->prox_persistence);
> +}
> +
> +static ssize_t bhsfh_prox_persistence_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t len)
> +{
> + struct bhsfh_chip *chip = dev_get_drvdata(dev);
> + unsigned long value;
> +
> + if (strict_strtoul(buf, 0, &value))
> + return -EINVAL;
> +
> + if (value > BHSFH_PROX_MAX_PERSISTENCE)
> + return -EINVAL;
> +
> + chip->prox_persistence = value;
> +
> + return len;
> +}
> +
> +static ssize_t bhsfh_prox_abs_thres_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct bhsfh_chip *chip = dev_get_drvdata(dev);
> + return snprintf(buf, PAGE_SIZE, "%u\n", chip->prox_abs_thres);
> +}
> +
> +static ssize_t bhsfh_prox_abs_thres_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t len)
> +{
> + struct bhsfh_chip *chip = dev_get_drvdata(dev);
> + unsigned long value;
> +
> + if (strict_strtoul(buf, 0, &value))
> + return -EINVAL;
> +
> + if (value > BHSFH_PROX_RANGE)
> + return -EINVAL;
> +
> + chip->prox_abs_thres = value;
> +
> + return len;
> +}
> +
> +static ssize_t bhsfh_chip_id_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct bhsfh_chip *chip = dev_get_drvdata(dev);
> + return sprintf(buf, "%s rev %d\n", chip->chipname, chip->revision);
> +}
> +
> +static ssize_t bhsfh_lux_calib_default_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + return snprintf(buf, PAGE_SIZE, "%u\n", BHSFH_CALIB_SCALER);
The PAGE_SIZE limit is rather paranoid for a single integer followed by
a new line! Doesn't do any harm though...
> +}
> +
> +static ssize_t bhsfh_lux_calib_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct bhsfh_chip *chip = dev_get_drvdata(dev);
> + ssize_t len;
> +
> + mutex_lock(&chip->mutex);
> + len = snprintf(buf, PAGE_SIZE, "%u\n", chip->lux_calib);
> + mutex_unlock(&chip->mutex);
> + return len;
> +}
> +
> +static ssize_t bhsfh_lux_calib_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t len)
> +{
> + struct bhsfh_chip *chip = dev_get_drvdata(dev);
> + unsigned long value;
> + u32 old_calib;
> + u32 new_corr;
> +
> + if (strict_strtoul(buf, 0, &value))
> + return -EINVAL;
> +
> + mutex_lock(&chip->mutex);
> + old_calib = chip->lux_calib;
> + chip->lux_calib = value;
> + new_corr = bhsfh_get_corr_value(chip);
> + if (new_corr == 0) {
> + chip->lux_calib = old_calib;
> + mutex_unlock(&chip->mutex);
> + return -EINVAL;
> + }
> + chip->lux_corr = new_corr;
> + /* Refresh thresholds on HW after changing correction value */
> + bhsfh_lux_update_thresholds(chip, chip->lux_threshold_hi,
> + chip->lux_threshold_lo);
> +
> + mutex_unlock(&chip->mutex);
> +
> + return len;
> +}
> +
> +static ssize_t bhsfh_get_lux_rate_avail(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + int i;
> + int pos = 0;
> + for (i = 0; i < ARRAY_SIZE(lux_rates_hz); i++)
> + pos += sprintf(buf + pos, "%d ", lux_rates_hz[i]);
> + sprintf(buf + pos - 1, "\n");
> + return pos;
> +}
> +
> +static ssize_t bhsfh_get_lux_rate(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct bhsfh_chip *chip = dev_get_drvdata(dev);
> + return sprintf(buf, "%d\n", lux_rates_hz[chip->lux_rate_index]);
> +}
> +
> +static ssize_t bhsfh_set_lux_rate(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct bhsfh_chip *chip = dev_get_drvdata(dev);
> + unsigned long rate_hz;
> + int ret, i;
> +
> + if (strict_strtoul(buf, 0, &rate_hz))
> + return -EINVAL;
> +
> + mutex_lock(&chip->mutex);
> +
Why does the search need to occur under the mutex?
> + for (i = 0; i < ARRAY_SIZE(lux_rates_hz); i++)
> + if (rate_hz >= lux_rates_hz[i])
> + break;
> +
> + if (i > BHSFH_ALS_MAX_RATE)
> + i = BHSFH_ALS_MAX_RATE;
> +
> + chip->lux_rate_index = i;
> + ret = bhsfh_lux_rate(chip, i);
> + mutex_unlock(&chip->mutex);
> +
> + if (ret < 0)
> + return ret;
> +
> + return count;
> +}
> +
> +static ssize_t bhsfh_get_lux_thresh_above(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct bhsfh_chip *chip = dev_get_drvdata(dev);
> + return sprintf(buf, "%d\n", chip->lux_threshold_hi);
> +}
> +
> +static ssize_t bhsfh_get_lux_thresh_below(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct bhsfh_chip *chip = dev_get_drvdata(dev);
> + return sprintf(buf, "%d\n", chip->lux_threshold_lo);
> +}
> +
> +static ssize_t bhsfh_set_lux_thresh(struct bhsfh_chip *chip, u16 *target,
> + const char *buf)
> +{
> + int ret = 0;
> + unsigned long thresh;
> +
> + if (strict_strtoul(buf, 0, &thresh))
> + return -EINVAL;
> +
> + if (thresh > BHSFH_LUX_RANGE)
> + return -EINVAL;
> +
> + mutex_lock(&chip->mutex);
> + *target = thresh;
> + /*
> + * Don't update values in HW if we are still waiting for
> + * first interrupt to come after device handle open call.
> + */
> + if (!chip->lux_wait_result)
> + ret = bhsfh_lux_update_thresholds(chip, chip->lux_threshold_hi,
> + chip->lux_threshold_lo);
> + mutex_unlock(&chip->mutex);
> + return ret;
> +
> +}
> +
> +static ssize_t bhsfh_set_lux_thresh_above(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t len)
> +{
> + struct bhsfh_chip *chip = dev_get_drvdata(dev);
> + int ret = bhsfh_set_lux_thresh(chip, &chip->lux_threshold_hi, buf);
> + if (ret < 0)
> + return ret;
> + return len;
> +}
> +
> +static ssize_t bhsfh_set_lux_thresh_below(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t len)
> +{
> + struct bhsfh_chip *chip = dev_get_drvdata(dev);
> + int ret = bhsfh_set_lux_thresh(chip, &chip->lux_threshold_lo, buf);
> + if (ret < 0)
> + return ret;
> + return len;
> +}
> +
> +static DEVICE_ATTR(prox0_raw_en, S_IRUGO | S_IWUSR, bhsfh_prox_enable_show,
> + bhsfh_prox_enable_store);
> +static DEVICE_ATTR(prox0_thresh_above1_value, S_IRUGO | S_IWUSR,
> + bhsfh_prox_abs_thres_show,
> + bhsfh_prox_abs_thres_store);
> +static DEVICE_ATTR(prox0_thresh_above0_value, S_IRUGO | S_IWUSR,
> + bhsfh_get_prox_thres,
> + bhsfh_set_prox_thres);
> +static DEVICE_ATTR(prox0_raw, S_IRUGO, bhsfh_prox_result_show, NULL);
> +static DEVICE_ATTR(prox0_sensor_range, S_IRUGO, bhsfh_prox_range_show, NULL);
> +static DEVICE_ATTR(prox0_thresh_above_count, S_IRUGO | S_IWUSR,
> + bhsfh_prox_persistence_show,
> + bhsfh_prox_persistence_store);
> +static DEVICE_ATTR(prox0_rate_above, S_IRUGO | S_IWUSR,
> + bhsfh_get_prox_rate_above,
> + bhsfh_set_prox_rate_above);
> +static DEVICE_ATTR(prox0_rate_below, S_IRUGO | S_IWUSR,
> + bhsfh_get_prox_rate_below,
> + bhsfh_set_prox_rate_below);
> +static DEVICE_ATTR(prox0_rate_avail, S_IRUGO, bhsfh_get_prox_rate_avail, NULL);
> +
> +static DEVICE_ATTR(lux0_calibscale, S_IRUGO | S_IWUSR, bhsfh_lux_calib_show,
> + bhsfh_lux_calib_store);
> +static DEVICE_ATTR(lux0_calibscale_default, S_IRUGO,
> + bhsfh_lux_calib_default_show,
> + NULL);
> +static DEVICE_ATTR(lux0_input, S_IRUGO, bhsfh_lux_result_show, NULL);
> +static DEVICE_ATTR(lux0_sensor_range, S_IRUGO, bhsfh_lux_range_show, NULL);
> +static DEVICE_ATTR(lux0_rate, S_IRUGO | S_IWUSR, bhsfh_get_lux_rate,
> + bhsfh_set_lux_rate);
> +static DEVICE_ATTR(lux0_rate_avail, S_IRUGO, bhsfh_get_lux_rate_avail, NULL);
> +static DEVICE_ATTR(lux0_thresh_above_value, S_IRUGO | S_IWUSR,
> + bhsfh_get_lux_thresh_above,
> + bhsfh_set_lux_thresh_above);
> +static DEVICE_ATTR(lux0_thresh_below_value, S_IRUGO | S_IWUSR,
> + bhsfh_get_lux_thresh_below,
> + bhsfh_set_lux_thresh_below);
> +static DEVICE_ATTR(chip_id, S_IRUGO, bhsfh_chip_id_show, NULL);
> +static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR, bhsfh_power_state_show,
> + bhsfh_power_state_store);
> +
> +
> +static struct attribute *sysfs_attrs[] = {
> + &dev_attr_lux0_calibscale.attr,
> + &dev_attr_lux0_calibscale_default.attr,
> + &dev_attr_lux0_input.attr,
> + &dev_attr_lux0_sensor_range.attr,
> + &dev_attr_lux0_rate.attr,
> + &dev_attr_lux0_rate_avail.attr,
> + &dev_attr_lux0_thresh_above_value.attr,
> + &dev_attr_lux0_thresh_below_value.attr,
> + &dev_attr_prox0_raw.attr,
> + &dev_attr_prox0_sensor_range.attr,
> + &dev_attr_prox0_raw_en.attr,
> + &dev_attr_prox0_thresh_above_count.attr,
> + &dev_attr_prox0_rate_above.attr,
> + &dev_attr_prox0_rate_below.attr,
> + &dev_attr_prox0_rate_avail.attr,
> + &dev_attr_prox0_thresh_above0_value.attr,
> + &dev_attr_prox0_thresh_above1_value.attr,
> + &dev_attr_chip_id.attr,
> + &dev_attr_power_state.attr,
> + NULL
> +};
> +
> +static struct attribute_group bhsfh_attribute_group = {
> + .attrs = sysfs_attrs
> +};
> +
> +static int __devinit bhsfh_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct bhsfh_chip *chip;
> + int err;
> +
> + chip = kzalloc(sizeof *chip, GFP_KERNEL);
> + if (!chip)
> + return -ENOMEM;
> +
> + i2c_set_clientdata(client, chip);
> + chip->client = client;
> +
> + mutex_init(&chip->mutex);
> + init_waitqueue_head(&chip->wait);
> + INIT_DELAYED_WORK(&chip->prox_work, bhsfh_prox_work);
> +
> + if (client->dev.platform_data == NULL) {
> + dev_err(&client->dev, "platform data is mandatory\n");
> + err = -EINVAL;
> + goto fail1;
> + }
> +
> + chip->pdata = client->dev.platform_data;
> + chip->lux_calib = BHSFH_LUX_NEUTRAL_CALIB_VALUE;
> + chip->lux_rate_index = BHSFH_LUX_DEFAULT_RATE;
> + chip->lux_threshold_lo = BHSFH_LUX_DEF_THRES;
> + chip->lux_threshold_hi = BHSFH_LUX_DEF_THRES;
> +
> + if (chip->pdata->glass_attenuation == 0)
> + chip->lux_ga = BHFSH_NEUTRAL_GA;
> + else
> + chip->lux_ga = chip->pdata->glass_attenuation;
> +
> + chip->prox_threshold = BHSFH_PROX_DEF_THRES;
> + chip->prox_led = chip->pdata->led_def_curr;
> + chip->prox_abs_thres = BHSFH_PROX_DEF_ABS_THRES;
> + chip->prox_persistence = BHSFH_DEFAULT_PERSISTENCE;
> + chip->prox_data = 0;
> +
> +
> + bhsfh_prox_rate_below(chip, BHSFH_PROX_DEFAULT_RATE);
> + bhsfh_prox_rate_above(chip, BHSFH_PROX_DEF_RATE_THRESH);
> +
> + chip->regs[0].supply = reg_vcc;
> + chip->regs[1].supply = reg_vleds;
> +
> + err = regulator_bulk_get(&client->dev,
> + ARRAY_SIZE(chip->regs), chip->regs);
> + if (err < 0) {
> + dev_err(&client->dev, "Cannot get regulators\n");
> + goto fail1;
> + }
> +
> + err = regulator_bulk_enable(ARRAY_SIZE(chip->regs),
> + chip->regs);
> + if (err < 0) {
> + dev_err(&client->dev, "Cannot enable regulators\n");
> + goto fail2;
> + }
> +
> + usleep_range(BHSFH_STARTUP_DELAY, BHSFH_STARTUP_DELAY * 2);
> + err = bhsfh_detect(chip);
> + if (err < 0)
> + goto fail3;
> +
> + /* Start chip */
> + bhsfh_chip_on(chip);
> + pm_runtime_set_active(&client->dev);
> + pm_runtime_enable(&client->dev);
> +
> + chip->lux_corr = bhsfh_get_corr_value(chip);
> + if (chip->lux_corr == 0) {
> + dev_err(&client->dev, "Improper correction values\n");
> + err = -EINVAL;
> + goto fail3;
> + }
> +
> + if (chip->pdata->setup_resources) {
> + err = chip->pdata->setup_resources();
> + if (err) {
> + err = -EINVAL;
> + goto fail3;
> + }
> + }
> +
> + err = sysfs_create_group(&chip->client->dev.kobj,
> + &bhsfh_attribute_group);
> + if (err < 0) {
> + dev_err(&chip->client->dev, "Sysfs registration failed\n");
> + goto fail4;
> + }
> +
> + /*
> + * Chip needs level triggered interrupt to work. However,
> + * level triggering doesn't work always correctly with power
> + * management. Select both
> + */
> + err = request_threaded_irq(client->irq, NULL,
> + bhsfh_irq,
> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
> + IRQF_TRIGGER_LOW,
> + "bhsfh", chip);
> + if (err) {
> + dev_err(&client->dev, "could not get IRQ %d\n",
> + client->irq);
> + goto fail5;
> + }
> + regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs);
> + return err;
> +fail5:
> + sysfs_remove_group(&chip->client->dev.kobj,
> + &bhsfh_attribute_group);
> +fail4:
> + if (chip->pdata->release_resources)
> + chip->pdata->release_resources();
> +fail3:
> + regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs);
> +fail2:
> + regulator_bulk_free(ARRAY_SIZE(chip->regs), chip->regs);
> +fail1:
> + kfree(chip);
> + return err;
> +}
> +
> +static int __devexit bhsfh_remove(struct i2c_client *client)
> +{
> + struct bhsfh_chip *chip = i2c_get_clientdata(client);
> +
> + free_irq(client->irq, chip);
> +
> + sysfs_remove_group(&chip->client->dev.kobj,
> + &bhsfh_attribute_group);
> +
> + if (chip->pdata->release_resources)
> + chip->pdata->release_resources();
> +
> + cancel_delayed_work_sync(&chip->prox_work);
> +
> + if (!pm_runtime_suspended(&client->dev))
> + bhsfh_chip_off(chip);
> +
> + pm_runtime_disable(&client->dev);
> + pm_runtime_set_suspended(&client->dev);
> +
> + regulator_bulk_free(ARRAY_SIZE(chip->regs), chip->regs);
> + kfree(chip);
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +static int bhsfh_suspend(struct device *dev)
> +{
> + struct i2c_client *client = container_of(dev, struct i2c_client, dev);
> + struct bhsfh_chip *chip = i2c_get_clientdata(client);
> +
> + bhsfh_chip_off(chip);
> +
> + return 0;
> +}
> +
> +static int bhsfh_resume(struct device *dev)
> +{
> + struct i2c_client *client = container_of(dev, struct i2c_client, dev);
> + struct bhsfh_chip *chip = i2c_get_clientdata(client);
> + int ret = 0;
> +
> + bhsfh_chip_on(chip);
> +
> + if (!pm_runtime_suspended(dev)) {
> + /*
> + * If we were enabled at suspend time, it is expected
> + * everything works nice and smoothly
> + */
> + ret = bhsfh_lux_rate(chip, chip->lux_rate_index);
> + ret |= bhsfh_lux_interrupt_control(chip, BHSFH_ENABLE);
> +
> + /* This causes interrupt after the next measurement cycle */
> + bhsfh_lux_update_thresholds(chip, BHSFH_LUX_DEF_THRES,
> + BHSFH_LUX_DEF_THRES);
> + /* Inform that we are waiting for a result from ALS */
> + chip->lux_wait_result = true;
> + bhsfh_prox_mode_control(chip);
> + }
> + return ret;
> +}
> +
> +#else
> +#define bhsfh_suspend NULL
> +#define bhsfh_shutdown NULL
> +#define bhsfh_resume NULL
> +#endif
> +
> +#ifdef CONFIG_PM_RUNTIME
> +static int bhsfh_runtime_suspend(struct device *dev)
> +{
> + struct i2c_client *client = container_of(dev, struct i2c_client, dev);
> + struct bhsfh_chip *chip = i2c_get_clientdata(client);
> +
> + bhsfh_chip_off(chip);
> +
> + return 0;
> +}
> +
> +static int bhsfh_runtime_resume(struct device *dev)
> +{
> + struct i2c_client *client = container_of(dev, struct i2c_client, dev);
> + struct bhsfh_chip *chip = i2c_get_clientdata(client);
> +
> + bhsfh_chip_on(chip);
> +
> + return 0;
> +}
> +#endif
> +
> +static const struct i2c_device_id bhsfh_id[] = {
> + {"bh1770glc", 0 },
> + {"sfh7770", 0 },
> + {}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, bhsfh_id);
> +
> +static const struct dev_pm_ops bhsfh_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(bhsfh_suspend, bhsfh_resume)
> + SET_RUNTIME_PM_OPS(bhsfh_runtime_suspend, bhsfh_runtime_resume, NULL)
> +};
> +
> +static struct i2c_driver bhsfh_driver = {
> + .driver = {
> + .name = "bhsfh",
> + .owner = THIS_MODULE,
> + .pm = &bhsfh_pm_ops,
> + },
> + .probe = bhsfh_probe,
> + .remove = __devexit_p(bhsfh_remove),
> + .id_table = bhsfh_id,
> +};
> +
> +static int __init bhsfh_init(void)
> +{
> + return i2c_add_driver(&bhsfh_driver);
> +}
> +
> +static void __exit bhsfh_exit(void)
> +{
> + i2c_del_driver(&bhsfh_driver);
> +}
> +
> +MODULE_DESCRIPTION("BH1770GLC / SFH7770 combined ALS and proximity sensor");
> +MODULE_AUTHOR("Samu Onkalo, Nokia Corporation");
> +MODULE_LICENSE("GPL v2");
> +
> +module_init(bhsfh_init);
> +module_exit(bhsfh_exit);
> diff --git a/include/linux/i2c/bhsfh.h b/include/linux/i2c/bhsfh.h
> new file mode 100644
> index 0000000..a19e791
> --- /dev/null
> +++ b/include/linux/i2c/bhsfh.h
> @@ -0,0 +1,42 @@
> +/*
> + * This file is part of the ROHM BH1770GLC / OSRAM SFH7770 sensor driver.
> + * Chip is combined proximity and ambient light sensor.
> + *
> + * Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
> + *
> + * Contact: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
> + * 02110-1301 USA
> + *
> + */
> +
> +#ifndef __BHSFH_H__
> +#define __BHSFH_H__
> +
> +struct bhsfh_platform_data {
> +#define BHSFH_LED_5mA 0
> +#define BHSFH_LED_10mA 1
> +#define BHSFH_LED_20mA 2
> +#define BHSFH_LED_50mA 3
> +#define BHSFH_LED_100mA 4
> +#define BHSFH_LED_150mA 5
> +#define BHSFH_LED_200mA 6
> + __u8 led_def_curr;
> +#define BHFSH_NEUTRAL_GA 16384 /* 16384 / 16384 = 1 */
> + __u32 glass_attenuation;
> + int (*setup_resources)(void);
> + int (*release_resources)(void);
> +};
> +#endif
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/