[PATCH 1/4] drivers:staging:ti-st: remove TI_ST from staging

[pavan_savoy]

From: Pavan Savoy <pavan_savoy@xxxxxx>

remove the 3 source files st_core.c, st_kim.c and st_ll.c
from staging, also modify the Kconfig and Makefile to not
to include them in build.

Signed-off-by: Pavan Savoy <pavan_savoy@xxxxxx>
---
 drivers/staging/ti-st/Kconfig   |   11 -
 drivers/staging/ti-st/Makefile  |    2 -
 drivers/staging/ti-st/st_core.c | 1030 ---------------------------------------
 drivers/staging/ti-st/st_kim.c  |  797 ------------------------------
 drivers/staging/ti-st/st_ll.c   |  149 ------
 5 files changed, 0 insertions(+), 1989 deletions(-)
 delete mode 100644 drivers/staging/ti-st/st_core.c
 delete mode 100644 drivers/staging/ti-st/st_kim.c
 delete mode 100644 drivers/staging/ti-st/st_ll.c

diff --git a/drivers/staging/ti-st/Kconfig b/drivers/staging/ti-st/Kconfig
index 858062d..074b8e8 100644
--- a/drivers/staging/ti-st/Kconfig
+++ b/drivers/staging/ti-st/Kconfig
@@ -3,17 +3,6 @@
 # drivers (BT, FM and GPS)
 #
 menu "Texas Instruments shared transport line discipline"
-config TI_ST
-	tristate "Shared transport core driver"
-	depends on RFKILL
-	select FW_LOADER
-	help
-	  This enables the shared transport core driver for TI
-	  BT / FM and GPS combo chips. This enables protocol drivers
-	  to register themselves with core and send data, the responses
-	  are returned to relevant protocol drivers based on their
-	  packet types.
-
 config ST_BT
 	tristate "BlueZ bluetooth driver for ST"
 	depends on BT && RFKILL
diff --git a/drivers/staging/ti-st/Makefile b/drivers/staging/ti-st/Makefile
index 0167d1d..5f11b82 100644
--- a/drivers/staging/ti-st/Makefile
+++ b/drivers/staging/ti-st/Makefile
@@ -2,6 +2,4 @@
 # Makefile for TI's shared transport line discipline
 # and its protocol drivers (BT, FM, GPS)
 #
-obj-$(CONFIG_TI_ST) 		+= st_drv.o
-st_drv-objs			:= st_core.o st_kim.o st_ll.o
 obj-$(CONFIG_ST_BT) 		+= bt_drv.o
diff --git a/drivers/staging/ti-st/st_core.c b/drivers/staging/ti-st/st_core.c
deleted file mode 100644
index 5bef61e..0000000
--- a/drivers/staging/ti-st/st_core.c
+++ /dev/null
@@ -1,1030 +0,0 @@
-/*
- *  Shared Transport Line discipline driver Core
- *	This hooks up ST KIM driver and ST LL driver
- *  Copyright (C) 2009 Texas Instruments
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#define pr_fmt(fmt)	"(stc): " fmt
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-
-/* understand BT, FM and GPS for now */
-#include <net/bluetooth/bluetooth.h>
-#include <net/bluetooth/hci_core.h>
-#include <net/bluetooth/hci.h>
-#include <linux/ti_wilink_st.h>
-
-/* strings to be used for rfkill entries and by
- * ST Core to be used for sysfs debug entry
- */
-#define PROTO_ENTRY(type, name)	name
-const unsigned char *protocol_strngs[] = {
-	PROTO_ENTRY(ST_BT, "Bluetooth"),
-	PROTO_ENTRY(ST_FM, "FM"),
-	PROTO_ENTRY(ST_GPS, "GPS"),
-};
-/* function pointer pointing to either,
- * st_kim_recv during registration to receive fw download responses
- * st_int_recv after registration to receive proto stack responses
- */
-void (*st_recv) (void*, const unsigned char*, long);
-
-/********************************************************************/
-#if 0
-/* internal misc functions */
-bool is_protocol_list_empty(void)
-{
-	unsigned char i = 0;
-	pr_debug(" %s ", __func__);
-	for (i = 0; i < ST_MAX; i++) {
-		if (st_gdata->list[i] != NULL)
-			return ST_NOTEMPTY;
-		/* not empty */
-	}
-	/* list empty */
-	return ST_EMPTY;
-}
-#endif
-
-/* can be called in from
- * -- KIM (during fw download)
- * -- ST Core (during st_write)
- *
- *  This is the internal write function - a wrapper
- *  to tty->ops->write
- */
-int st_int_write(struct st_data_s *st_gdata,
-	const unsigned char *data, int count)
-{
-	struct tty_struct *tty;
-	if (unlikely(st_gdata == NULL || st_gdata->tty == NULL)) {
-		pr_err("tty unavailable to perform write");
-		return -1;
-	}
-	tty = st_gdata->tty;
-#ifdef VERBOSE
-	print_hex_dump(KERN_DEBUG, "<out<", DUMP_PREFIX_NONE,
-		16, 1, data, count, 0);
-#endif
-	return tty->ops->write(tty, data, count);
-
-}
-
-/*
- * push the skb received to relevant
- * protocol stacks
- */
-void st_send_frame(enum proto_type protoid, struct st_data_s *st_gdata)
-{
-	pr_info(" %s(prot:%d) ", __func__, protoid);
-
-	if (unlikely
-	    (st_gdata == NULL || st_gdata->rx_skb == NULL
-	     || st_gdata->list[protoid] == NULL)) {
-		pr_err("protocol %d not registered, no data to send?",
-			   protoid);
-		kfree_skb(st_gdata->rx_skb);
-		return;
-	}
-	/* this cannot fail
-	 * this shouldn't take long
-	 * - should be just skb_queue_tail for the
-	 *   protocol stack driver
-	 */
-	if (likely(st_gdata->list[protoid]->recv != NULL)) {
-		if (unlikely
-			(st_gdata->list[protoid]->recv
-			(st_gdata->list[protoid]->priv_data, st_gdata->rx_skb)
-			     != 0)) {
-			pr_err(" proto stack %d's ->recv failed", protoid);
-			kfree_skb(st_gdata->rx_skb);
-			return;
-		}
-	} else {
-		pr_err(" proto stack %d's ->recv null", protoid);
-		kfree_skb(st_gdata->rx_skb);
-	}
-	return;
-}
-
-/**
- * st_reg_complete -
- * to call registration complete callbacks
- * of all protocol stack drivers
- */
-void st_reg_complete(struct st_data_s *st_gdata, char err)
-{
-	unsigned char i = 0;
-	pr_info(" %s ", __func__);
-	for (i = 0; i < ST_MAX; i++) {
-		if (likely(st_gdata != NULL && st_gdata->list[i] != NULL &&
-			   st_gdata->list[i]->reg_complete_cb != NULL))
-			st_gdata->list[i]->reg_complete_cb
-				(st_gdata->list[i]->priv_data, err);
-	}
-}
-
-static inline int st_check_data_len(struct st_data_s *st_gdata,
-	int protoid, int len)
-{
-	register int room = skb_tailroom(st_gdata->rx_skb);
-
-	pr_debug("len %d room %d", len, room);
-
-	if (!len) {
-		/* Received packet has only packet header and
-		 * has zero length payload. So, ask ST CORE to
-		 * forward the packet to protocol driver (BT/FM/GPS)
-		 */
-		st_send_frame(protoid, st_gdata);
-
-	} else if (len > room) {
-		/* Received packet's payload length is larger.
-		 * We can't accommodate it in created skb.
-		 */
-		pr_err("Data length is too large len %d room %d", len,
-			   room);
-		kfree_skb(st_gdata->rx_skb);
-	} else {
-		/* Packet header has non-zero payload length and
-		 * we have enough space in created skb. Lets read
-		 * payload data */
-		st_gdata->rx_state = ST_BT_W4_DATA;
-		st_gdata->rx_count = len;
-		return len;
-	}
-
-	/* Change ST state to continue to process next
-	 * packet */
-	st_gdata->rx_state = ST_W4_PACKET_TYPE;
-	st_gdata->rx_skb = NULL;
-	st_gdata->rx_count = 0;
-
-	return 0;
-}
-
-/**
- * st_wakeup_ack - internal function for action when wake-up ack
- *	received
- */
-static inline void st_wakeup_ack(struct st_data_s *st_gdata,
-	unsigned char cmd)
-{
-	register struct sk_buff *waiting_skb;
-	unsigned long flags = 0;
-
-	spin_lock_irqsave(&st_gdata->lock, flags);
-	/* de-Q from waitQ and Q in txQ now that the
-	 * chip is awake
-	 */
-	while ((waiting_skb = skb_dequeue(&st_gdata->tx_waitq)))
-		skb_queue_tail(&st_gdata->txq, waiting_skb);
-
-	/* state forwarded to ST LL */
-	st_ll_sleep_state(st_gdata, (unsigned long)cmd);
-	spin_unlock_irqrestore(&st_gdata->lock, flags);
-
-	/* wake up to send the recently copied skbs from waitQ */
-	st_tx_wakeup(st_gdata);
-}
-
-/**
- * st_int_recv - ST's internal receive function.
- *	Decodes received RAW data and forwards to corresponding
- *	client drivers (Bluetooth,FM,GPS..etc).
- *	This can receive various types of packets,
- *	HCI-Events, ACL, SCO, 4 types of HCI-LL PM packets
- *	CH-8 packets from FM, CH-9 packets from GPS cores.
- */
-void st_int_recv(void *disc_data,
-	const unsigned char *data, long count)
-{
-	register char *ptr;
-	struct hci_event_hdr *eh;
-	struct hci_acl_hdr *ah;
-	struct hci_sco_hdr *sh;
-	struct fm_event_hdr *fm;
-	struct gps_event_hdr *gps;
-	register int len = 0, type = 0, dlen = 0;
-	static enum proto_type protoid = ST_MAX;
-	struct st_data_s *st_gdata = (struct st_data_s *)disc_data;
-
-	ptr = (char *)data;
-	/* tty_receive sent null ? */
-	if (unlikely(ptr == NULL) || (st_gdata == NULL)) {
-		pr_err(" received null from TTY ");
-		return;
-	}
-
-	pr_info("count %ld rx_state %ld"
-		   "rx_count %ld", count, st_gdata->rx_state,
-		   st_gdata->rx_count);
-
-	/* Decode received bytes here */
-	while (count) {
-		if (st_gdata->rx_count) {
-			len = min_t(unsigned int, st_gdata->rx_count, count);
-			memcpy(skb_put(st_gdata->rx_skb, len), ptr, len);
-			st_gdata->rx_count -= len;
-			count -= len;
-			ptr += len;
-
-			if (st_gdata->rx_count)
-				continue;
-
-			/* Check ST RX state machine , where are we? */
-			switch (st_gdata->rx_state) {
-
-				/* Waiting for complete packet ? */
-			case ST_BT_W4_DATA:
-				pr_debug("Complete pkt received");
-
-				/* Ask ST CORE to forward
-				 * the packet to protocol driver */
-				st_send_frame(protoid, st_gdata);
-
-				st_gdata->rx_state = ST_W4_PACKET_TYPE;
-				st_gdata->rx_skb = NULL;
-				protoid = ST_MAX;	/* is this required ? */
-				continue;
-
-				/* Waiting for Bluetooth event header ? */
-			case ST_BT_W4_EVENT_HDR:
-				eh = (struct hci_event_hdr *)st_gdata->rx_skb->
-				    data;
-
-				pr_debug("Event header: evt 0x%2.2x"
-					   "plen %d", eh->evt, eh->plen);
-
-				st_check_data_len(st_gdata, protoid, eh->plen);
-				continue;
-
-				/* Waiting for Bluetooth acl header ? */
-			case ST_BT_W4_ACL_HDR:
-				ah = (struct hci_acl_hdr *)st_gdata->rx_skb->
-				    data;
-				dlen = __le16_to_cpu(ah->dlen);
-
-				pr_info("ACL header: dlen %d", dlen);
-
-				st_check_data_len(st_gdata, protoid, dlen);
-				continue;
-
-				/* Waiting for Bluetooth sco header ? */
-			case ST_BT_W4_SCO_HDR:
-				sh = (struct hci_sco_hdr *)st_gdata->rx_skb->
-				    data;
-
-				pr_info("SCO header: dlen %d", sh->dlen);
-
-				st_check_data_len(st_gdata, protoid, sh->dlen);
-				continue;
-			case ST_FM_W4_EVENT_HDR:
-				fm = (struct fm_event_hdr *)st_gdata->rx_skb->
-				    data;
-				pr_info("FM Header: ");
-				st_check_data_len(st_gdata, ST_FM, fm->plen);
-				continue;
-				/* TODO : Add GPS packet machine logic here */
-			case ST_GPS_W4_EVENT_HDR:
-				/* [0x09 pkt hdr][R/W byte][2 byte len] */
-				gps = (struct gps_event_hdr *)st_gdata->rx_skb->
-				     data;
-				pr_info("GPS Header: ");
-				st_check_data_len(st_gdata, ST_GPS, gps->plen);
-				continue;
-			}	/* end of switch rx_state */
-		}
-
-		/* end of if rx_count */
-		/* Check first byte of packet and identify module
-		 * owner (BT/FM/GPS) */
-		switch (*ptr) {
-
-			/* Bluetooth event packet? */
-		case HCI_EVENT_PKT:
-			pr_info("Event packet");
-			st_gdata->rx_state = ST_BT_W4_EVENT_HDR;
-			st_gdata->rx_count = HCI_EVENT_HDR_SIZE;
-			type = HCI_EVENT_PKT;
-			protoid = ST_BT;
-			break;
-
-			/* Bluetooth acl packet? */
-		case HCI_ACLDATA_PKT:
-			pr_info("ACL packet");
-			st_gdata->rx_state = ST_BT_W4_ACL_HDR;
-			st_gdata->rx_count = HCI_ACL_HDR_SIZE;
-			type = HCI_ACLDATA_PKT;
-			protoid = ST_BT;
-			break;
-
-			/* Bluetooth sco packet? */
-		case HCI_SCODATA_PKT:
-			pr_info("SCO packet");
-			st_gdata->rx_state = ST_BT_W4_SCO_HDR;
-			st_gdata->rx_count = HCI_SCO_HDR_SIZE;
-			type = HCI_SCODATA_PKT;
-			protoid = ST_BT;
-			break;
-
-			/* Channel 8(FM) packet? */
-		case ST_FM_CH8_PKT:
-			pr_info("FM CH8 packet");
-			type = ST_FM_CH8_PKT;
-			st_gdata->rx_state = ST_FM_W4_EVENT_HDR;
-			st_gdata->rx_count = FM_EVENT_HDR_SIZE;
-			protoid = ST_FM;
-			break;
-
-			/* Channel 9(GPS) packet? */
-		case 0x9:	/*ST_LL_GPS_CH9_PKT */
-			pr_info("GPS CH9 packet");
-			type = 0x9;	/* ST_LL_GPS_CH9_PKT; */
-			protoid = ST_GPS;
-			st_gdata->rx_state = ST_GPS_W4_EVENT_HDR;
-			st_gdata->rx_count = 3;	/* GPS_EVENT_HDR_SIZE -1*/
-			break;
-		case LL_SLEEP_IND:
-		case LL_SLEEP_ACK:
-		case LL_WAKE_UP_IND:
-			pr_info("PM packet");
-			/* this takes appropriate action based on
-			 * sleep state received --
-			 */
-			st_ll_sleep_state(st_gdata, *ptr);
-			ptr++;
-			count--;
-			continue;
-		case LL_WAKE_UP_ACK:
-			pr_info("PM packet");
-			/* wake up ack received */
-			st_wakeup_ack(st_gdata, *ptr);
-			ptr++;
-			count--;
-			continue;
-			/* Unknow packet? */
-		default:
-			pr_err("Unknown packet type %2.2x", (__u8) *ptr);
-			ptr++;
-			count--;
-			continue;
-		};
-		ptr++;
-		count--;
-
-		switch (protoid) {
-		case ST_BT:
-			/* Allocate new packet to hold received data */
-			st_gdata->rx_skb =
-			    bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
-			if (!st_gdata->rx_skb) {
-				pr_err("Can't allocate mem for new packet");
-				st_gdata->rx_state = ST_W4_PACKET_TYPE;
-				st_gdata->rx_count = 0;
-				return;
-			}
-			bt_cb(st_gdata->rx_skb)->pkt_type = type;
-			break;
-		case ST_FM:	/* for FM */
-			st_gdata->rx_skb =
-			    alloc_skb(FM_MAX_FRAME_SIZE, GFP_ATOMIC);
-			if (!st_gdata->rx_skb) {
-				pr_err("Can't allocate mem for new packet");
-				st_gdata->rx_state = ST_W4_PACKET_TYPE;
-				st_gdata->rx_count = 0;
-				return;
-			}
-			/* place holder 0x08 */
-			skb_reserve(st_gdata->rx_skb, 1);
-			st_gdata->rx_skb->cb[0] = ST_FM_CH8_PKT;
-			break;
-		case ST_GPS:
-			/* for GPS */
-			st_gdata->rx_skb =
-			    alloc_skb(100 /*GPS_MAX_FRAME_SIZE */ , GFP_ATOMIC);
-			if (!st_gdata->rx_skb) {
-				pr_err("Can't allocate mem for new packet");
-				st_gdata->rx_state = ST_W4_PACKET_TYPE;
-				st_gdata->rx_count = 0;
-				return;
-			}
-			/* place holder 0x09 */
-			skb_reserve(st_gdata->rx_skb, 1);
-			st_gdata->rx_skb->cb[0] = 0x09;	/*ST_GPS_CH9_PKT; */
-			break;
-		case ST_MAX:
-			break;
-		}
-	}
-	pr_debug("done %s", __func__);
-	return;
-}
-
-/**
- * st_int_dequeue - internal de-Q function.
- *	If the previous data set was not written
- *	completely, return that skb which has the pending data.
- *	In normal cases, return top of txq.
- */
-struct sk_buff *st_int_dequeue(struct st_data_s *st_gdata)
-{
-	struct sk_buff *returning_skb;
-
-	pr_debug("%s", __func__);
-	if (st_gdata->tx_skb != NULL) {
-		returning_skb = st_gdata->tx_skb;
-		st_gdata->tx_skb = NULL;
-		return returning_skb;
-	}
-	return skb_dequeue(&st_gdata->txq);
-}
-
-/**
- * st_int_enqueue - internal Q-ing function.
- *	Will either Q the skb to txq or the tx_waitq
- *	depending on the ST LL state.
- *	If the chip is asleep, then Q it onto waitq and
- *	wakeup the chip.
- *	txq and waitq needs protection since the other contexts
- *	may be sending data, waking up chip.
- */
-void st_int_enqueue(struct st_data_s *st_gdata, struct sk_buff *skb)
-{
-	unsigned long flags = 0;
-
-	pr_debug("%s", __func__);
-	spin_lock_irqsave(&st_gdata->lock, flags);
-
-	switch (st_ll_getstate(st_gdata)) {
-	case ST_LL_AWAKE:
-		pr_info("ST LL is AWAKE, sending normally");
-		skb_queue_tail(&st_gdata->txq, skb);
-		break;
-	case ST_LL_ASLEEP_TO_AWAKE:
-		skb_queue_tail(&st_gdata->tx_waitq, skb);
-		break;
-	case ST_LL_AWAKE_TO_ASLEEP:
-		pr_err("ST LL is illegal state(%ld),"
-			   "purging received skb.", st_ll_getstate(st_gdata));
-		kfree_skb(skb);
-		break;
-	case ST_LL_ASLEEP:
-		skb_queue_tail(&st_gdata->tx_waitq, skb);
-		st_ll_wakeup(st_gdata);
-		break;
-	default:
-		pr_err("ST LL is illegal state(%ld),"
-			   "purging received skb.", st_ll_getstate(st_gdata));
-		kfree_skb(skb);
-		break;
-	}
-
-	spin_unlock_irqrestore(&st_gdata->lock, flags);
-	pr_debug("done %s", __func__);
-	return;
-}
-
-/*
- * internal wakeup function
- * called from either
- * - TTY layer when write's finished
- * - st_write (in context of the protocol stack)
- */
-void st_tx_wakeup(struct st_data_s *st_data)
-{
-	struct sk_buff *skb;
-	unsigned long flags;	/* for irq save flags */
-	pr_debug("%s", __func__);
-	/* check for sending & set flag sending here */
-	if (test_and_set_bit(ST_TX_SENDING, &st_data->tx_state)) {
-		pr_info("ST already sending");
-		/* keep sending */
-		set_bit(ST_TX_WAKEUP, &st_data->tx_state);
-		return;
-		/* TX_WAKEUP will be checked in another
-		 * context
-		 */
-	}
-	do {			/* come back if st_tx_wakeup is set */
-		/* woke-up to write */
-		clear_bit(ST_TX_WAKEUP, &st_data->tx_state);
-		while ((skb = st_int_dequeue(st_data))) {
-			int len;
-			spin_lock_irqsave(&st_data->lock, flags);
-			/* enable wake-up from TTY */
-			set_bit(TTY_DO_WRITE_WAKEUP, &st_data->tty->flags);
-			len = st_int_write(st_data, skb->data, skb->len);
-			skb_pull(skb, len);
-			/* if skb->len = len as expected, skb->len=0 */
-			if (skb->len) {
-				/* would be the next skb to be sent */
-				st_data->tx_skb = skb;
-				spin_unlock_irqrestore(&st_data->lock, flags);
-				break;
-			}
-			kfree_skb(skb);
-			spin_unlock_irqrestore(&st_data->lock, flags);
-		}
-		/* if wake-up is set in another context- restart sending */
-	} while (test_bit(ST_TX_WAKEUP, &st_data->tx_state));
-
-	/* clear flag sending */
-	clear_bit(ST_TX_SENDING, &st_data->tx_state);
-}
-
-/********************************************************************/
-/* functions called from ST KIM
-*/
-void kim_st_list_protocols(struct st_data_s *st_gdata, void *buf)
-{
-	seq_printf(buf, "[%d]\nBT=%c\nFM=%c\nGPS=%c\n",
-			st_gdata->protos_registered,
-			st_gdata->list[ST_BT] != NULL ? 'R' : 'U',
-			st_gdata->list[ST_FM] != NULL ? 'R' : 'U',
-			st_gdata->list[ST_GPS] != NULL ? 'R' : 'U');
-}
-
-/********************************************************************/
-/*
- * functions called from protocol stack drivers
- * to be EXPORT-ed
- */
-long st_register(struct st_proto_s *new_proto)
-{
-	struct st_data_s	*st_gdata;
-	long err = 0;
-	unsigned long flags = 0;
-
-	st_kim_ref(&st_gdata, 0);
-	pr_info("%s(%d) ", __func__, new_proto->type);
-	if (st_gdata == NULL || new_proto == NULL || new_proto->recv == NULL
-	    || new_proto->reg_complete_cb == NULL) {
-		pr_err("gdata/new_proto/recv or reg_complete_cb not ready");
-		return -1;
-	}
-
-	if (new_proto->type < ST_BT || new_proto->type >= ST_MAX) {
-		pr_err("protocol %d not supported", new_proto->type);
-		return -EPROTONOSUPPORT;
-	}
-
-	if (st_gdata->list[new_proto->type] != NULL) {
-		pr_err("protocol %d already registered", new_proto->type);
-		return -EALREADY;
-	}
-
-	/* can be from process context only */
-	spin_lock_irqsave(&st_gdata->lock, flags);
-
-	if (test_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state)) {
-		pr_info(" ST_REG_IN_PROGRESS:%d ", new_proto->type);
-		/* fw download in progress */
-		st_kim_chip_toggle(new_proto->type, KIM_GPIO_ACTIVE);
-
-		st_gdata->list[new_proto->type] = new_proto;
-		st_gdata->protos_registered++;
-		new_proto->write = st_write;
-
-		set_bit(ST_REG_PENDING, &st_gdata->st_state);
-		spin_unlock_irqrestore(&st_gdata->lock, flags);
-		return -EINPROGRESS;
-	} else if (st_gdata->protos_registered == ST_EMPTY) {
-		pr_info(" protocol list empty :%d ", new_proto->type);
-		set_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state);
-		st_recv = st_kim_recv;
-
-		/* release lock previously held - re-locked below */
-		spin_unlock_irqrestore(&st_gdata->lock, flags);
-
-		/* enable the ST LL - to set default chip state */
-		st_ll_enable(st_gdata);
-		/* this may take a while to complete
-		 * since it involves BT fw download
-		 */
-		err = st_kim_start(st_gdata->kim_data);
-		if (err != 0) {
-			clear_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state);
-			if ((st_gdata->protos_registered != ST_EMPTY) &&
-			    (test_bit(ST_REG_PENDING, &st_gdata->st_state))) {
-				pr_err(" KIM failure complete callback ");
-				st_reg_complete(st_gdata, -1);
-			}
-
-			return -1;
-		}
-
-		/* the protocol might require other gpios to be toggled
-		 */
-		st_kim_chip_toggle(new_proto->type, KIM_GPIO_ACTIVE);
-
-		clear_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state);
-		st_recv = st_int_recv;
-
-		/* this is where all pending registration
-		 * are signalled to be complete by calling callback functions
-		 */
-		if ((st_gdata->protos_registered != ST_EMPTY) &&
-		    (test_bit(ST_REG_PENDING, &st_gdata->st_state))) {
-			pr_debug(" call reg complete callback ");
-			st_reg_complete(st_gdata, 0);
-		}
-		clear_bit(ST_REG_PENDING, &st_gdata->st_state);
-
-		/* check for already registered once more,
-		 * since the above check is old
-		 */
-		if (st_gdata->list[new_proto->type] != NULL) {
-			pr_err(" proto %d already registered ",
-				   new_proto->type);
-			return -EALREADY;
-		}
-
-		spin_lock_irqsave(&st_gdata->lock, flags);
-		st_gdata->list[new_proto->type] = new_proto;
-		st_gdata->protos_registered++;
-		new_proto->write = st_write;
-		spin_unlock_irqrestore(&st_gdata->lock, flags);
-		return err;
-	}
-	/* if fw is already downloaded & new stack registers protocol */
-	else {
-		switch (new_proto->type) {
-		case ST_BT:
-			/* do nothing */
-			break;
-		case ST_FM:
-		case ST_GPS:
-			st_kim_chip_toggle(new_proto->type, KIM_GPIO_ACTIVE);
-			break;
-		case ST_MAX:
-		default:
-			pr_err("%d protocol not supported",
-				   new_proto->type);
-			spin_unlock_irqrestore(&st_gdata->lock, flags);
-			return -EPROTONOSUPPORT;
-		}
-		st_gdata->list[new_proto->type] = new_proto;
-		st_gdata->protos_registered++;
-		new_proto->write = st_write;
-
-		/* lock already held before entering else */
-		spin_unlock_irqrestore(&st_gdata->lock, flags);
-		return err;
-	}
-	pr_debug("done %s(%d) ", __func__, new_proto->type);
-}
-EXPORT_SYMBOL_GPL(st_register);
-
-/* to unregister a protocol -
- * to be called from protocol stack driver
- */
-long st_unregister(enum proto_type type)
-{
-	long err = 0;
-	unsigned long flags = 0;
-	struct st_data_s	*st_gdata;
-
-	pr_debug("%s: %d ", __func__, type);
-
-	st_kim_ref(&st_gdata, 0);
-	if (type < ST_BT || type >= ST_MAX) {
-		pr_err(" protocol %d not supported", type);
-		return -EPROTONOSUPPORT;
-	}
-
-	spin_lock_irqsave(&st_gdata->lock, flags);
-
-	if (st_gdata->list[type] == NULL) {
-		pr_err(" protocol %d not registered", type);
-		spin_unlock_irqrestore(&st_gdata->lock, flags);
-		return -EPROTONOSUPPORT;
-	}
-
-	st_gdata->protos_registered--;
-	st_gdata->list[type] = NULL;
-
-	/* kim ignores BT in the below function
-	 * and handles the rest, BT is toggled
-	 * only in kim_start and kim_stop
-	 */
-	st_kim_chip_toggle(type, KIM_GPIO_INACTIVE);
-	spin_unlock_irqrestore(&st_gdata->lock, flags);
-
-	if ((st_gdata->protos_registered == ST_EMPTY) &&
-	    (!test_bit(ST_REG_PENDING, &st_gdata->st_state))) {
-		pr_info(" all protocols unregistered ");
-
-		/* stop traffic on tty */
-		if (st_gdata->tty) {
-			tty_ldisc_flush(st_gdata->tty);
-			stop_tty(st_gdata->tty);
-		}
-
-		/* all protocols now unregistered */
-		st_kim_stop(st_gdata->kim_data);
-		/* disable ST LL */
-		st_ll_disable(st_gdata);
-	}
-	return err;
-}
-
-/*
- * called in protocol stack drivers
- * via the write function pointer
- */
-long st_write(struct sk_buff *skb)
-{
-	struct st_data_s *st_gdata;
-#ifdef DEBUG
-	enum proto_type protoid = ST_MAX;
-#endif
-	long len;
-
-	st_kim_ref(&st_gdata, 0);
-	if (unlikely(skb == NULL || st_gdata == NULL
-		|| st_gdata->tty == NULL)) {
-		pr_err("data/tty unavailable to perform write");
-		return -1;
-	}
-#ifdef DEBUG			/* open-up skb to read the 1st byte */
-	switch (skb->data[0]) {
-	case HCI_COMMAND_PKT:
-	case HCI_ACLDATA_PKT:
-	case HCI_SCODATA_PKT:
-		protoid = ST_BT;
-		break;
-	case ST_FM_CH8_PKT:
-		protoid = ST_FM;
-		break;
-	case 0x09:
-		protoid = ST_GPS;
-		break;
-	}
-	if (unlikely(st_gdata->list[protoid] == NULL)) {
-		pr_err(" protocol %d not registered, and writing? ",
-			   protoid);
-		return -1;
-	}
-#endif
-	pr_debug("%d to be written", skb->len);
-	len = skb->len;
-
-	/* st_ll to decide where to enqueue the skb */
-	st_int_enqueue(st_gdata, skb);
-	/* wake up */
-	st_tx_wakeup(st_gdata);
-
-	/* return number of bytes written */
-	return len;
-}
-
-/* for protocols making use of shared transport */
-EXPORT_SYMBOL_GPL(st_unregister);
-
-/********************************************************************/
-/*
- * functions called from TTY layer
- */
-static int st_tty_open(struct tty_struct *tty)
-{
-	int err = 0;
-	struct st_data_s *st_gdata;
-	pr_info("%s ", __func__);
-
-	st_kim_ref(&st_gdata, 0);
-	st_gdata->tty = tty;
-	tty->disc_data = st_gdata;
-
-	/* don't do an wakeup for now */
-	clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
-
-	/* mem already allocated
-	 */
-	tty->receive_room = 65536;
-	/* Flush any pending characters in the driver and discipline. */
-	tty_ldisc_flush(tty);
-	tty_driver_flush_buffer(tty);
-	/*
-	 * signal to UIM via KIM that -
-	 * installation of N_TI_WL ldisc is complete
-	 */
-	st_kim_complete(st_gdata->kim_data);
-	pr_debug("done %s", __func__);
-	return err;
-}
-
-static void st_tty_close(struct tty_struct *tty)
-{
-	unsigned char i = ST_MAX;
-	unsigned long flags = 0;
-	struct	st_data_s *st_gdata = tty->disc_data;
-
-	pr_info("%s ", __func__);
-
-	/* TODO:
-	 * if a protocol has been registered & line discipline
-	 * un-installed for some reason - what should be done ?
-	 */
-	spin_lock_irqsave(&st_gdata->lock, flags);
-	for (i = ST_BT; i < ST_MAX; i++) {
-		if (st_gdata->list[i] != NULL)
-			pr_err("%d not un-registered", i);
-		st_gdata->list[i] = NULL;
-	}
-	st_gdata->protos_registered = 0;
-	spin_unlock_irqrestore(&st_gdata->lock, flags);
-	/*
-	 * signal to UIM via KIM that -
-	 * N_TI_WL ldisc is un-installed
-	 */
-	st_kim_complete(st_gdata->kim_data);
-	st_gdata->tty = NULL;
-	/* Flush any pending characters in the driver and discipline. */
-	tty_ldisc_flush(tty);
-	tty_driver_flush_buffer(tty);
-
-	spin_lock_irqsave(&st_gdata->lock, flags);
-	/* empty out txq and tx_waitq */
-	skb_queue_purge(&st_gdata->txq);
-	skb_queue_purge(&st_gdata->tx_waitq);
-	/* reset the TTY Rx states of ST */
-	st_gdata->rx_count = 0;
-	st_gdata->rx_state = ST_W4_PACKET_TYPE;
-	kfree_skb(st_gdata->rx_skb);
-	st_gdata->rx_skb = NULL;
-	spin_unlock_irqrestore(&st_gdata->lock, flags);
-
-	pr_debug("%s: done ", __func__);
-}
-
-static void st_tty_receive(struct tty_struct *tty, const unsigned char *data,
-			   char *tty_flags, int count)
-{
-
-#ifdef VERBOSE
-	print_hex_dump(KERN_DEBUG, ">in>", DUMP_PREFIX_NONE,
-		16, 1, data, count, 0);
-#endif
-
-	/*
-	 * if fw download is in progress then route incoming data
-	 * to KIM for validation
-	 */
-	st_recv(tty->disc_data, data, count);
-	pr_debug("done %s", __func__);
-}
-
-/* wake-up function called in from the TTY layer
- * inside the internal wakeup function will be called
- */
-static void st_tty_wakeup(struct tty_struct *tty)
-{
-	struct	st_data_s *st_gdata = tty->disc_data;
-	pr_debug("%s ", __func__);
-	/* don't do an wakeup for now */
-	clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
-
-	/* call our internal wakeup */
-	st_tx_wakeup((void *)st_gdata);
-}
-
-static void st_tty_flush_buffer(struct tty_struct *tty)
-{
-	struct	st_data_s *st_gdata = tty->disc_data;
-	pr_debug("%s ", __func__);
-
-	kfree_skb(st_gdata->tx_skb);
-	st_gdata->tx_skb = NULL;
-
-	tty->ops->flush_buffer(tty);
-	return;
-}
-
-/********************************************************************/
-int st_core_init(struct st_data_s **core_data)
-{
-	struct st_data_s *st_gdata;
-	long err;
-	static struct tty_ldisc_ops *st_ldisc_ops;
-
-	/* populate and register to TTY line discipline */
-	st_ldisc_ops = kzalloc(sizeof(*st_ldisc_ops), GFP_KERNEL);
-	if (!st_ldisc_ops) {
-		pr_err("no mem to allocate");
-		return -ENOMEM;
-	}
-
-	st_ldisc_ops->magic = TTY_LDISC_MAGIC;
-	st_ldisc_ops->name = "n_st";	/*"n_hci"; */
-	st_ldisc_ops->open = st_tty_open;
-	st_ldisc_ops->close = st_tty_close;
-	st_ldisc_ops->receive_buf = st_tty_receive;
-	st_ldisc_ops->write_wakeup = st_tty_wakeup;
-	st_ldisc_ops->flush_buffer = st_tty_flush_buffer;
-	st_ldisc_ops->owner = THIS_MODULE;
-
-	err = tty_register_ldisc(N_TI_WL, st_ldisc_ops);
-	if (err) {
-		pr_err("error registering %d line discipline %ld",
-			   N_TI_WL, err);
-		kfree(st_ldisc_ops);
-		return err;
-	}
-	pr_debug("registered n_shared line discipline");
-
-	st_gdata = kzalloc(sizeof(struct st_data_s), GFP_KERNEL);
-	if (!st_gdata) {
-		pr_err("memory allocation failed");
-		err = tty_unregister_ldisc(N_TI_WL);
-		if (err)
-			pr_err("unable to un-register ldisc %ld", err);
-		kfree(st_ldisc_ops);
-		err = -ENOMEM;
-		return err;
-	}
-
-	/* Initialize ST TxQ and Tx waitQ queue head. All BT/FM/GPS module skb's
-	 * will be pushed in this queue for actual transmission.
-	 */
-	skb_queue_head_init(&st_gdata->txq);
-	skb_queue_head_init(&st_gdata->tx_waitq);
-
-	/* Locking used in st_int_enqueue() to avoid multiple execution */
-	spin_lock_init(&st_gdata->lock);
-
-	/* ldisc_ops ref to be only used in __exit of module */
-	st_gdata->ldisc_ops = st_ldisc_ops;
-
-#if 0
-	err = st_kim_init();
-	if (err) {
-		pr_err("error during kim initialization(%ld)", err);
-		kfree(st_gdata);
-		err = tty_unregister_ldisc(N_TI_WL);
-		if (err)
-			pr_err("unable to un-register ldisc");
-		kfree(st_ldisc_ops);
-		return -1;
-	}
-#endif
-
-	err = st_ll_init(st_gdata);
-	if (err) {
-		pr_err("error during st_ll initialization(%ld)", err);
-		kfree(st_gdata);
-		err = tty_unregister_ldisc(N_TI_WL);
-		if (err)
-			pr_err("unable to un-register ldisc");
-		kfree(st_ldisc_ops);
-		return -1;
-	}
-	*core_data = st_gdata;
-	return 0;
-}
-
-void st_core_exit(struct st_data_s *st_gdata)
-{
-	long err;
-	/* internal module cleanup */
-	err = st_ll_deinit(st_gdata);
-	if (err)
-		pr_err("error during deinit of ST LL %ld", err);
-#if 0
-	err = st_kim_deinit();
-	if (err)
-		pr_err("error during deinit of ST KIM %ld", err);
-#endif
-	if (st_gdata != NULL) {
-		/* Free ST Tx Qs and skbs */
-		skb_queue_purge(&st_gdata->txq);
-		skb_queue_purge(&st_gdata->tx_waitq);
-		kfree_skb(st_gdata->rx_skb);
-		kfree_skb(st_gdata->tx_skb);
-		/* TTY ldisc cleanup */
-		err = tty_unregister_ldisc(N_TI_WL);
-		if (err)
-			pr_err("unable to un-register ldisc %ld", err);
-		kfree(st_gdata->ldisc_ops);
-		/* free the global data pointer */
-		kfree(st_gdata);
-	}
-}
-
-
diff --git a/drivers/staging/ti-st/st_kim.c b/drivers/staging/ti-st/st_kim.c
deleted file mode 100644
index 372a996..0000000
--- a/drivers/staging/ti-st/st_kim.c
+++ /dev/null
@@ -1,797 +0,0 @@
-/*
- *  Shared Transport Line discipline driver Core
- *	Init Manager module responsible for GPIO control
- *	and firmware download
- *  Copyright (C) 2009 Texas Instruments
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#define pr_fmt(fmt) "(stk) :" fmt
-#include <linux/platform_device.h>
-#include <linux/jiffies.h>
-#include <linux/firmware.h>
-#include <linux/delay.h>
-#include <linux/wait.h>
-#include <linux/gpio.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/sched.h>
-#include <linux/rfkill.h>
-
-/* understand BT events for fw response */
-#include <net/bluetooth/bluetooth.h>
-#include <net/bluetooth/hci_core.h>
-#include <net/bluetooth/hci.h>
-
-#include <linux/ti_wilink_st.h>
-
-
-static int kim_probe(struct platform_device *pdev);
-static int kim_remove(struct platform_device *pdev);
-
-/* KIM platform device driver structure */
-static struct platform_driver kim_platform_driver = {
-	.probe = kim_probe,
-	.remove = kim_remove,
-	/* TODO: ST driver power management during suspend/resume ?
-	 */
-#if 0
-	.suspend = kim_suspend,
-	.resume = kim_resume,
-#endif
-	.driver = {
-		   .name = "kim",
-		   .owner = THIS_MODULE,
-		   },
-};
-
-static int kim_toggle_radio(void*, bool);
-static const struct rfkill_ops kim_rfkill_ops = {
-	.set_block = kim_toggle_radio,
-};
-
-/* strings to be used for rfkill entries and by
- * ST Core to be used for sysfs debug entry
- */
-#define PROTO_ENTRY(type, name)	name
-const unsigned char *protocol_names[] = {
-	PROTO_ENTRY(ST_BT, "Bluetooth"),
-	PROTO_ENTRY(ST_FM, "FM"),
-	PROTO_ENTRY(ST_GPS, "GPS"),
-};
-
-#define MAX_ST_DEVICES	3	/* Imagine 1 on each UART for now */
-struct platform_device *st_kim_devices[MAX_ST_DEVICES];
-
-/**********************************************************************/
-/* internal functions */
-
-/**
- * st_get_plat_device -
- *	function which returns the reference to the platform device
- *	requested by id. As of now only 1 such device exists (id=0)
- *	the context requesting for reference can get the id to be
- *	requested by a. The protocol driver which is registering or
- *	b. the tty device which is opened.
- */
-static struct platform_device *st_get_plat_device(int id)
-{
-	return st_kim_devices[id];
-}
-
-/**
- * validate_firmware_response -
- *	function to return whether the firmware response was proper
- *	in case of error don't complete so that waiting for proper
- *	response times out
- */
-void validate_firmware_response(struct kim_data_s *kim_gdata)
-{
-	struct sk_buff *skb = kim_gdata->rx_skb;
-	if (unlikely(skb->data[5] != 0)) {
-		pr_err("no proper response during fw download");
-		pr_err("data6 %x", skb->data[5]);
-		return;		/* keep waiting for the proper response */
-	}
-	/* becos of all the script being downloaded */
-	complete_all(&kim_gdata->kim_rcvd);
-	kfree_skb(skb);
-}
-
-/* check for data len received inside kim_int_recv
- * most often hit the last case to update state to waiting for data
- */
-static inline int kim_check_data_len(struct kim_data_s *kim_gdata, int len)
-{
-	register int room = skb_tailroom(kim_gdata->rx_skb);
-
-	pr_debug("len %d room %d", len, room);
-
-	if (!len) {
-		validate_firmware_response(kim_gdata);
-	} else if (len > room) {
-		/* Received packet's payload length is larger.
-		 * We can't accommodate it in created skb.
-		 */
-		pr_err("Data length is too large len %d room %d", len,
-			   room);
-		kfree_skb(kim_gdata->rx_skb);
-	} else {
-		/* Packet header has non-zero payload length and
-		 * we have enough space in created skb. Lets read
-		 * payload data */
-		kim_gdata->rx_state = ST_BT_W4_DATA;
-		kim_gdata->rx_count = len;
-		return len;
-	}
-
-	/* Change ST LL state to continue to process next
-	 * packet */
-	kim_gdata->rx_state = ST_W4_PACKET_TYPE;
-	kim_gdata->rx_skb = NULL;
-	kim_gdata->rx_count = 0;
-
-	return 0;
-}
-
-/**
- * kim_int_recv - receive function called during firmware download
- *	firmware download responses on different UART drivers
- *	have been observed to come in bursts of different
- *	tty_receive and hence the logic
- */
-void kim_int_recv(struct kim_data_s *kim_gdata,
-	const unsigned char *data, long count)
-{
-	register char *ptr;
-	struct hci_event_hdr *eh;
-	register int len = 0, type = 0;
-
-	pr_debug("%s", __func__);
-	/* Decode received bytes here */
-	ptr = (char *)data;
-	if (unlikely(ptr == NULL)) {
-		pr_err(" received null from TTY ");
-		return;
-	}
-	while (count) {
-		if (kim_gdata->rx_count) {
-			len = min_t(unsigned int, kim_gdata->rx_count, count);
-			memcpy(skb_put(kim_gdata->rx_skb, len), ptr, len);
-			kim_gdata->rx_count -= len;
-			count -= len;
-			ptr += len;
-
-			if (kim_gdata->rx_count)
-				continue;
-
-			/* Check ST RX state machine , where are we? */
-			switch (kim_gdata->rx_state) {
-				/* Waiting for complete packet ? */
-			case ST_BT_W4_DATA:
-				pr_debug("Complete pkt received");
-				validate_firmware_response(kim_gdata);
-				kim_gdata->rx_state = ST_W4_PACKET_TYPE;
-				kim_gdata->rx_skb = NULL;
-				continue;
-				/* Waiting for Bluetooth event header ? */
-			case ST_BT_W4_EVENT_HDR:
-				eh = (struct hci_event_hdr *)kim_gdata->
-				    rx_skb->data;
-				pr_debug("Event header: evt 0x%2.2x"
-					   "plen %d", eh->evt, eh->plen);
-				kim_check_data_len(kim_gdata, eh->plen);
-				continue;
-			}	/* end of switch */
-		}		/* end of if rx_state */
-		switch (*ptr) {
-			/* Bluetooth event packet? */
-		case HCI_EVENT_PKT:
-			pr_info("Event packet");
-			kim_gdata->rx_state = ST_BT_W4_EVENT_HDR;
-			kim_gdata->rx_count = HCI_EVENT_HDR_SIZE;
-			type = HCI_EVENT_PKT;
-			break;
-		default:
-			pr_info("unknown packet");
-			ptr++;
-			count--;
-			continue;
-		}
-		ptr++;
-		count--;
-		kim_gdata->rx_skb =
-		    bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
-		if (!kim_gdata->rx_skb) {
-			pr_err("can't allocate mem for new packet");
-			kim_gdata->rx_state = ST_W4_PACKET_TYPE;
-			kim_gdata->rx_count = 0;
-			return;
-		}
-		bt_cb(kim_gdata->rx_skb)->pkt_type = type;
-	}
-	pr_info("done %s", __func__);
-	return;
-}
-
-static long read_local_version(struct kim_data_s *kim_gdata, char *bts_scr_name)
-{
-	unsigned short version = 0, chip = 0, min_ver = 0, maj_ver = 0;
-	char read_ver_cmd[] = { 0x01, 0x01, 0x10, 0x00 };
-
-	pr_debug("%s", __func__);
-
-	INIT_COMPLETION(kim_gdata->kim_rcvd);
-	if (4 != st_int_write(kim_gdata->core_data, read_ver_cmd, 4)) {
-		pr_err("kim: couldn't write 4 bytes");
-		return -1;
-	}
-
-	if (!wait_for_completion_timeout
-	    (&kim_gdata->kim_rcvd, msecs_to_jiffies(CMD_RESP_TIME))) {
-		pr_err(" waiting for ver info- timed out ");
-		return -1;
-	}
-
-	version =
-		MAKEWORD(kim_gdata->resp_buffer[13],
-				kim_gdata->resp_buffer[14]);
-	chip = (version & 0x7C00) >> 10;
-	min_ver = (version & 0x007F);
-	maj_ver = (version & 0x0380) >> 7;
-
-	if (version & 0x8000)
-		maj_ver |= 0x0008;
-
-	sprintf(bts_scr_name, "TIInit_%d.%d.%d.bts", chip, maj_ver, min_ver);
-
-	/* to be accessed later via sysfs entry */
-	kim_gdata->version.full = version;
-	kim_gdata->version.chip = chip;
-	kim_gdata->version.maj_ver = maj_ver;
-	kim_gdata->version.min_ver = min_ver;
-
-	pr_info("%s", bts_scr_name);
-	return 0;
-}
-
-/**
- * download_firmware -
- *	internal function which parses through the .bts firmware
- *	script file intreprets SEND, DELAY actions only as of now
- */
-static long download_firmware(struct kim_data_s *kim_gdata)
-{
-	long err = 0;
-	long len = 0;
-	register unsigned char *ptr = NULL;
-	register unsigned char *action_ptr = NULL;
-	unsigned char bts_scr_name[30] = { 0 };	/* 30 char long bts scr name? */
-
-	err = read_local_version(kim_gdata, bts_scr_name);
-	if (err != 0) {
-		pr_err("kim: failed to read local ver");
-		return err;
-	}
-	err =
-	    request_firmware(&kim_gdata->fw_entry, bts_scr_name,
-			     &kim_gdata->kim_pdev->dev);
-	if (unlikely((err != 0) || (kim_gdata->fw_entry->data == NULL) ||
-		     (kim_gdata->fw_entry->size == 0))) {
-		pr_err(" request_firmware failed(errno %ld) for %s", err,
-			   bts_scr_name);
-		return -1;
-	}
-	ptr = (void *)kim_gdata->fw_entry->data;
-	len = kim_gdata->fw_entry->size;
-	/* bts_header to remove out magic number and
-	 * version
-	 */
-	ptr += sizeof(struct bts_header);
-	len -= sizeof(struct bts_header);
-
-	while (len > 0 && ptr) {
-		pr_debug(" action size %d, type %d ",
-			   ((struct bts_action *)ptr)->size,
-			   ((struct bts_action *)ptr)->type);
-
-		switch (((struct bts_action *)ptr)->type) {
-		case ACTION_SEND_COMMAND:	/* action send */
-			action_ptr = &(((struct bts_action *)ptr)->data[0]);
-			if (unlikely
-			    (((struct hci_command *)action_ptr)->opcode ==
-			     0xFF36)) {
-				/* ignore remote change
-				 * baud rate HCI VS command */
-				pr_err
-				    (" change remote baud"
-				    " rate command in firmware");
-				break;
-			}
-
-			INIT_COMPLETION(kim_gdata->kim_rcvd);
-			err = st_int_write(kim_gdata->core_data,
-			((struct bts_action_send *)action_ptr)->data,
-					   ((struct bts_action *)ptr)->size);
-			if (unlikely(err < 0)) {
-				release_firmware(kim_gdata->fw_entry);
-				return -1;
-			}
-			if (!wait_for_completion_timeout
-			    (&kim_gdata->kim_rcvd,
-			     msecs_to_jiffies(CMD_RESP_TIME))) {
-				pr_err
-				    (" response timeout during fw download ");
-				/* timed out */
-				release_firmware(kim_gdata->fw_entry);
-				return -1;
-			}
-			break;
-		case ACTION_DELAY:	/* sleep */
-			pr_info("sleep command in scr");
-			action_ptr = &(((struct bts_action *)ptr)->data[0]);
-			mdelay(((struct bts_action_delay *)action_ptr)->msec);
-			break;
-		}
-		len =
-		    len - (sizeof(struct bts_action) +
-			   ((struct bts_action *)ptr)->size);
-		ptr =
-		    ptr + sizeof(struct bts_action) +
-		    ((struct bts_action *)ptr)->size;
-	}
-	/* fw download complete */
-	release_firmware(kim_gdata->fw_entry);
-	return 0;
-}
-
-/**********************************************************************/
-/* functions called from ST core */
-/* function to toggle the GPIO
- * needs to know whether the GPIO is active high or active low
- */
-void st_kim_chip_toggle(enum proto_type type, enum kim_gpio_state state)
-{
-	struct platform_device	*kim_pdev;
-	struct kim_data_s	*kim_gdata;
-	pr_info(" %s ", __func__);
-
-	kim_pdev = st_get_plat_device(0);
-	kim_gdata = dev_get_drvdata(&kim_pdev->dev);
-
-	if (kim_gdata->gpios[type] == -1) {
-		pr_info(" gpio not requested for protocol %s",
-			   protocol_names[type]);
-		return;
-	}
-	switch (type) {
-	case ST_BT:
-		/*Do Nothing */
-		break;
-
-	case ST_FM:
-		if (state == KIM_GPIO_ACTIVE)
-			gpio_set_value(kim_gdata->gpios[ST_FM], GPIO_LOW);
-		else
-			gpio_set_value(kim_gdata->gpios[ST_FM], GPIO_HIGH);
-		break;
-
-	case ST_GPS:
-		if (state == KIM_GPIO_ACTIVE)
-			gpio_set_value(kim_gdata->gpios[ST_GPS], GPIO_HIGH);
-		else
-			gpio_set_value(kim_gdata->gpios[ST_GPS], GPIO_LOW);
-		break;
-
-	case ST_MAX:
-	default:
-		break;
-	}
-
-	return;
-}
-
-/* called from ST Core, when REG_IN_PROGRESS (registration in progress)
- * can be because of
- * 1. response to read local version
- * 2. during send/recv's of firmware download
- */
-void st_kim_recv(void *disc_data, const unsigned char *data, long count)
-{
-	struct st_data_s	*st_gdata = (struct st_data_s *)disc_data;
-	struct kim_data_s	*kim_gdata = st_gdata->kim_data;
-
-	pr_info(" %s ", __func__);
-	/* copy to local buffer */
-	if (unlikely(data[4] == 0x01 && data[5] == 0x10 && data[0] == 0x04)) {
-		/* must be the read_ver_cmd */
-		memcpy(kim_gdata->resp_buffer, data, count);
-		complete_all(&kim_gdata->kim_rcvd);
-		return;
-	} else {
-		kim_int_recv(kim_gdata, data, count);
-		/* either completes or times out */
-	}
-	return;
-}
-
-/* to signal completion of line discipline installation
- * called from ST Core, upon tty_open
- */
-void st_kim_complete(void *kim_data)
-{
-	struct kim_data_s	*kim_gdata = (struct kim_data_s *)kim_data;
-	complete(&kim_gdata->ldisc_installed);
-}
-
-/**
- * st_kim_start - called from ST Core upon 1st registration
- *	This involves toggling the chip enable gpio, reading
- *	the firmware version from chip, forming the fw file name
- *	based on the chip version, requesting the fw, parsing it
- *	and perform download(send/recv).
- */
-long st_kim_start(void *kim_data)
-{
-	long err = 0;
-	long retry = POR_RETRY_COUNT;
-	struct kim_data_s	*kim_gdata = (struct kim_data_s *)kim_data;
-
-	pr_info(" %s", __func__);
-
-	do {
-		/* TODO: this is only because rfkill sub-system
-		 * doesn't send events to user-space if the state
-		 * isn't changed
-		 */
-		rfkill_set_hw_state(kim_gdata->rfkill[ST_BT], 1);
-		/* Configure BT nShutdown to HIGH state */
-		gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_LOW);
-		mdelay(5);	/* FIXME: a proper toggle */
-		gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_HIGH);
-		mdelay(100);
-		/* re-initialize the completion */
-		INIT_COMPLETION(kim_gdata->ldisc_installed);
-#if 0 /* older way of signalling user-space UIM */
-		/* send signal to UIM */
-		err = kill_pid(find_get_pid(kim_gdata->uim_pid), SIGUSR2, 0);
-		if (err != 0) {
-			pr_info(" sending SIGUSR2 to uim failed %ld", err);
-			err = -1;
-			continue;
-		}
-#endif
-		/* unblock and send event to UIM via /dev/rfkill */
-		rfkill_set_hw_state(kim_gdata->rfkill[ST_BT], 0);
-		/* wait for ldisc to be installed */
-		err = wait_for_completion_timeout(&kim_gdata->ldisc_installed,
-				msecs_to_jiffies(LDISC_TIME));
-		if (!err) {	/* timeout */
-			pr_err("line disc installation timed out ");
-			err = -1;
-			continue;
-		} else {
-			/* ldisc installed now */
-			pr_info(" line discipline installed ");
-			err = download_firmware(kim_gdata);
-			if (err != 0) {
-				pr_err("download firmware failed");
-				continue;
-			} else {	/* on success don't retry */
-				break;
-			}
-		}
-	} while (retry--);
-	return err;
-}
-
-/**
- * st_kim_stop - called from ST Core, on the last un-registration
- *	toggle low the chip enable gpio
- */
-long st_kim_stop(void *kim_data)
-{
-	long err = 0;
-	struct kim_data_s	*kim_gdata = (struct kim_data_s *)kim_data;
-
-	INIT_COMPLETION(kim_gdata->ldisc_installed);
-#if 0 /* older way of signalling user-space UIM */
-	/* send signal to UIM */
-	err = kill_pid(find_get_pid(kim_gdata->uim_pid), SIGUSR2, 1);
-	if (err != 0) {
-		pr_err("sending SIGUSR2 to uim failed %ld", err);
-		return -1;
-	}
-#endif
-	/* set BT rfkill to be blocked */
-	err = rfkill_set_hw_state(kim_gdata->rfkill[ST_BT], 1);
-
-	/* wait for ldisc to be un-installed */
-	err = wait_for_completion_timeout(&kim_gdata->ldisc_installed,
-			msecs_to_jiffies(LDISC_TIME));
-	if (!err) {		/* timeout */
-		pr_err(" timed out waiting for ldisc to be un-installed");
-		return -1;
-	}
-
-	/* By default configure BT nShutdown to LOW state */
-	gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_LOW);
-	mdelay(1);
-	gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_HIGH);
-	mdelay(1);
-	gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_LOW);
-	return err;
-}
-
-/**********************************************************************/
-/* functions called from subsystems */
-/* called when debugfs entry is read from */
-
-static int show_version(struct seq_file *s, void *unused)
-{
-	struct kim_data_s *kim_gdata = (struct kim_data_s *)s->private;
-	seq_printf(s, "%04X %d.%d.%d\n", kim_gdata->version.full,
-			kim_gdata->version.chip, kim_gdata->version.maj_ver,
-			kim_gdata->version.min_ver);
-	return 0;
-}
-
-static int show_list(struct seq_file *s, void *unused)
-{
-	struct kim_data_s *kim_gdata = (struct kim_data_s *)s->private;
-	kim_st_list_protocols(kim_gdata->core_data, s);
-	return 0;
-}
-
-/* function called from rfkill subsystem, when someone from
- * user space would write 0/1 on the sysfs entry
- * /sys/class/rfkill/rfkill0,1,3/state
- */
-static int kim_toggle_radio(void *data, bool blocked)
-{
-	enum proto_type type = *((enum proto_type *)data);
-	pr_debug(" %s: %d ", __func__, type);
-
-	switch (type) {
-	case ST_BT:
-		/* do nothing */
-	break;
-	case ST_FM:
-	case ST_GPS:
-		if (blocked)
-			st_kim_chip_toggle(type, KIM_GPIO_INACTIVE);
-		else
-			st_kim_chip_toggle(type, KIM_GPIO_ACTIVE);
-	break;
-	case ST_MAX:
-		pr_err(" wrong proto type ");
-	break;
-	}
-	return 0;
-}
-
-/**
- * st_kim_ref - reference the core's data
- *	This references the per-ST platform device in the arch/xx/
- *	board-xx.c file.
- *	This would enable multiple such platform devices to exist
- *	on a given platform
- */
-void st_kim_ref(struct st_data_s **core_data, int id)
-{
-	struct platform_device	*pdev;
-	struct kim_data_s	*kim_gdata;
-	/* get kim_gdata reference from platform device */
-	pdev = st_get_plat_device(id);
-	kim_gdata = dev_get_drvdata(&pdev->dev);
-	*core_data = kim_gdata->core_data;
-}
-
-static int kim_version_open(struct inode *i, struct file *f)
-{
-	return single_open(f, show_version, i->i_private);
-}
-
-static int kim_list_open(struct inode *i, struct file *f)
-{
-	return single_open(f, show_list, i->i_private);
-}
-
-static const struct file_operations version_debugfs_fops = {
-	/* version info */
-	.open = kim_version_open,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-};
-static const struct file_operations list_debugfs_fops = {
-	/* protocols info */
-	.open = kim_list_open,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-};
-
-/**********************************************************************/
-/* functions called from platform device driver subsystem
- * need to have a relevant platform device entry in the platform's
- * board-*.c file
- */
-
-struct dentry *kim_debugfs_dir;
-static int kim_probe(struct platform_device *pdev)
-{
-	long status;
-	long proto;
-	long *gpios = pdev->dev.platform_data;
-	struct kim_data_s	*kim_gdata;
-
-	if ((pdev->id != -1) && (pdev->id < MAX_ST_DEVICES)) {
-		/* multiple devices could exist */
-		st_kim_devices[pdev->id] = pdev;
-	} else {
-		/* platform's sure about existance of 1 device */
-		st_kim_devices[0] = pdev;
-	}
-
-	kim_gdata = kzalloc(sizeof(struct kim_data_s), GFP_ATOMIC);
-	if (!kim_gdata) {
-		pr_err("no mem to allocate");
-		return -ENOMEM;
-	}
-	dev_set_drvdata(&pdev->dev, kim_gdata);
-
-	status = st_core_init(&kim_gdata->core_data);
-	if (status != 0) {
-		pr_err(" ST core init failed");
-		return -1;
-	}
-	/* refer to itself */
-	kim_gdata->core_data->kim_data = kim_gdata;
-
-	for (proto = 0; proto < ST_MAX; proto++) {
-		kim_gdata->gpios[proto] = gpios[proto];
-		pr_info(" %ld gpio to be requested", gpios[proto]);
-	}
-
-	for (proto = 0; (proto < ST_MAX) && (gpios[proto] != -1); proto++) {
-		/* Claim the Bluetooth/FM/GPIO
-		 * nShutdown gpio from the system
-		 */
-		status = gpio_request(gpios[proto], "kim");
-		if (unlikely(status)) {
-			pr_err(" gpio %ld request failed ", gpios[proto]);
-			proto -= 1;
-			while (proto >= 0) {
-				if (gpios[proto] != -1)
-					gpio_free(gpios[proto]);
-			}
-			return status;
-		}
-
-		/* Configure nShutdown GPIO as output=0 */
-		status =
-		    gpio_direction_output(gpios[proto], 0);
-		if (unlikely(status)) {
-			pr_err(" unable to configure gpio %ld",
-				   gpios[proto]);
-			proto -= 1;
-			while (proto >= 0) {
-				if (gpios[proto] != -1)
-					gpio_free(gpios[proto]);
-			}
-			return status;
-		}
-	}
-	/* get reference of pdev for request_firmware
-	 */
-	kim_gdata->kim_pdev = pdev;
-	init_completion(&kim_gdata->kim_rcvd);
-	init_completion(&kim_gdata->ldisc_installed);
-
-	for (proto = 0; (proto < ST_MAX) && (gpios[proto] != -1); proto++) {
-		/* TODO: should all types be rfkill_type_bt ? */
-		kim_gdata->rf_protos[proto] = proto;
-		kim_gdata->rfkill[proto] = rfkill_alloc(protocol_names[proto],
-			&pdev->dev, RFKILL_TYPE_BLUETOOTH,
-			&kim_rfkill_ops, &kim_gdata->rf_protos[proto]);
-		if (kim_gdata->rfkill[proto] == NULL) {
-			pr_err("cannot create rfkill entry for gpio %ld",
-				   gpios[proto]);
-			continue;
-		}
-		/* block upon creation */
-		rfkill_init_sw_state(kim_gdata->rfkill[proto], 1);
-		status = rfkill_register(kim_gdata->rfkill[proto]);
-		if (unlikely(status)) {
-			pr_err("rfkill registration failed for gpio %ld",
-				   gpios[proto]);
-			rfkill_unregister(kim_gdata->rfkill[proto]);
-			continue;
-		}
-		pr_info("rfkill entry created for %ld", gpios[proto]);
-	}
-
-	kim_debugfs_dir = debugfs_create_dir("ti-st", NULL);
-	if (IS_ERR(kim_debugfs_dir)) {
-		pr_err(" debugfs entries creation failed ");
-		kim_debugfs_dir = NULL;
-		return -1;
-	}
-
-	debugfs_create_file("version", S_IRUGO, kim_debugfs_dir,
-				kim_gdata, &version_debugfs_fops);
-	debugfs_create_file("protocols", S_IRUGO, kim_debugfs_dir,
-				kim_gdata, &list_debugfs_fops);
-	pr_info(" debugfs entries created ");
-	return 0;
-}
-
-static int kim_remove(struct platform_device *pdev)
-{
-	/* free the GPIOs requested
-	 */
-	long *gpios = pdev->dev.platform_data;
-	long proto;
-	struct kim_data_s	*kim_gdata;
-
-	kim_gdata = dev_get_drvdata(&pdev->dev);
-
-	for (proto = 0; (proto < ST_MAX) && (gpios[proto] != -1); proto++) {
-		/* Claim the Bluetooth/FM/GPIO
-		 * nShutdown gpio from the system
-		 */
-		gpio_free(gpios[proto]);
-		rfkill_unregister(kim_gdata->rfkill[proto]);
-		rfkill_destroy(kim_gdata->rfkill[proto]);
-		kim_gdata->rfkill[proto] = NULL;
-	}
-	pr_info("kim: GPIO Freed");
-	debugfs_remove_recursive(kim_debugfs_dir);
-	kim_gdata->kim_pdev = NULL;
-	st_core_exit(kim_gdata->core_data);
-
-	kfree(kim_gdata);
-	kim_gdata = NULL;
-	return 0;
-}
-
-/**********************************************************************/
-/* entry point for ST KIM module, called in from ST Core */
-
-static int __init st_kim_init(void)
-{
-	long ret = 0;
-	ret = platform_driver_register(&kim_platform_driver);
-	if (ret != 0) {
-		pr_err("platform drv registration failed");
-		return -1;
-	}
-	return 0;
-}
-
-static void __exit st_kim_deinit(void)
-{
-	/* the following returns void */
-	platform_driver_unregister(&kim_platform_driver);
-}
-
-
-module_init(st_kim_init);
-module_exit(st_kim_deinit);
-MODULE_AUTHOR("Pavan Savoy <pavan_savoy@xxxxxx>");
-MODULE_DESCRIPTION("Shared Transport Driver for TI BT/FM/GPS combo chips ");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/ti-st/st_ll.c b/drivers/staging/ti-st/st_ll.c
deleted file mode 100644
index ed1e4bc..0000000
--- a/drivers/staging/ti-st/st_ll.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- *  Shared Transport driver
- *	HCI-LL module responsible for TI proprietary HCI_LL protocol
- *  Copyright (C) 2009 Texas Instruments
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#define pr_fmt(fmt) "(stll) :" fmt
-#include <linux/skbuff.h>
-#include <linux/module.h>
-#include <linux/ti_wilink_st.h>
-
-/**********************************************************************/
-/* internal functions */
-static void send_ll_cmd(struct st_data_s *st_data,
-	unsigned char cmd)
-{
-
-	pr_info("%s: writing %x", __func__, cmd);
-	st_int_write(st_data, &cmd, 1);
-	return;
-}
-
-static void ll_device_want_to_sleep(struct st_data_s *st_data)
-{
-	pr_debug("%s", __func__);
-	/* sanity check */
-	if (st_data->ll_state != ST_LL_AWAKE)
-		pr_err("ERR hcill: ST_LL_GO_TO_SLEEP_IND"
-			  "in state %ld", st_data->ll_state);
-
-	send_ll_cmd(st_data, LL_SLEEP_ACK);
-	/* update state */
-	st_data->ll_state = ST_LL_ASLEEP;
-}
-
-static void ll_device_want_to_wakeup(struct st_data_s *st_data)
-{
-	/* diff actions in diff states */
-	switch (st_data->ll_state) {
-	case ST_LL_ASLEEP:
-		send_ll_cmd(st_data, LL_WAKE_UP_ACK);	/* send wake_ack */
-		break;
-	case ST_LL_ASLEEP_TO_AWAKE:
-		/* duplicate wake_ind */
-		pr_err("duplicate wake_ind while waiting for Wake ack");
-		break;
-	case ST_LL_AWAKE:
-		/* duplicate wake_ind */
-		pr_err("duplicate wake_ind already AWAKE");
-		break;
-	case ST_LL_AWAKE_TO_ASLEEP:
-		/* duplicate wake_ind */
-		pr_err("duplicate wake_ind");
-		break;
-	}
-	/* update state */
-	st_data->ll_state = ST_LL_AWAKE;
-}
-
-/**********************************************************************/
-/* functions invoked by ST Core */
-
-/* called when ST Core wants to
- * enable ST LL */
-void st_ll_enable(struct st_data_s *ll)
-{
-	ll->ll_state = ST_LL_AWAKE;
-}
-
-/* called when ST Core /local module wants to
- * disable ST LL */
-void st_ll_disable(struct st_data_s *ll)
-{
-	ll->ll_state = ST_LL_INVALID;
-}
-
-/* called when ST Core wants to update the state */
-void st_ll_wakeup(struct st_data_s *ll)
-{
-	if (likely(ll->ll_state != ST_LL_AWAKE)) {
-		send_ll_cmd(ll, LL_WAKE_UP_IND);	/* WAKE_IND */
-		ll->ll_state = ST_LL_ASLEEP_TO_AWAKE;
-	} else {
-		/* don't send the duplicate wake_indication */
-		pr_err(" Chip already AWAKE ");
-	}
-}
-
-/* called when ST Core wants the state */
-unsigned long st_ll_getstate(struct st_data_s *ll)
-{
-	pr_debug(" returning state %ld", ll->ll_state);
-	return ll->ll_state;
-}
-
-/* called from ST Core, when a PM related packet arrives */
-unsigned long st_ll_sleep_state(struct st_data_s *st_data,
-	unsigned char cmd)
-{
-	switch (cmd) {
-	case LL_SLEEP_IND:	/* sleep ind */
-		pr_info("sleep indication recvd");
-		ll_device_want_to_sleep(st_data);
-		break;
-	case LL_SLEEP_ACK:	/* sleep ack */
-		pr_err("sleep ack rcvd: host shouldn't");
-		break;
-	case LL_WAKE_UP_IND:	/* wake ind */
-		pr_info("wake indication recvd");
-		ll_device_want_to_wakeup(st_data);
-		break;
-	case LL_WAKE_UP_ACK:	/* wake ack */
-		pr_info("wake ack rcvd");
-		st_data->ll_state = ST_LL_AWAKE;
-		break;
-	default:
-		pr_err(" unknown input/state ");
-		return -1;
-	}
-	return 0;
-}
-
-/* Called from ST CORE to initialize ST LL */
-long st_ll_init(struct st_data_s *ll)
-{
-	/* set state to invalid */
-	ll->ll_state = ST_LL_INVALID;
-	return 0;
-}
-
-/* Called from ST CORE to de-initialize ST LL */
-long st_ll_deinit(struct st_data_s *ll)
-{
-	return 0;
-}
-- 
1.6.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/