Re: [PATCH] x86, nmi: workaround sti; hlt race vs nmi; intr

From: Avi Kivity
Date: Mon Sep 27 2010 - 04:38:13 EST


On 09/19/2010 06:28 PM, Avi Kivity wrote:
On machines without monitor/mwait we use an sti; hlt sequence to atomically
enable interrupts and put the cpu to sleep. The sequence uses the "interrupt
shadow" property of the sti instruction: interrupts are enabled only after
the instruction following sti has been executed. This means an interrupt
cannot happen in the middle of the sequence, which would leave us with
the interrupt processed but the cpu halted.

The interrupt shadow, however, can be broken by an nmi; the following
sequence

sti
nmi ... iret
# interrupt shadow disabled
intr ... iret
hlt

puts the cpu to sleep, even though the interrupt may need additional processing
after the hlt (like scheduling a task).

sti is explicitly documented not to force an interrupt shadow; though many
processors do inhibit nmi immediately after sti.

Avoid the race by checking, during an nmi, if we hit the safe halt sequence.
If we did, increment the instruction pointer past the hlt instruction; this
allows an immediately following interrupt to return to a safe place.

Signed-off-by: Avi Kivity<avi@xxxxxxxxxx>

Ping.

---
arch/x86/include/asm/irqflags.h | 18 +++++++++++++++++-
arch/x86/kernel/traps.c | 14 ++++++++++++++
2 files changed, 31 insertions(+), 1 deletions(-)

diff --git a/arch/x86/include/asm/irqflags.h b/arch/x86/include/asm/irqflags.h
index 9e2b952..f412167 100644
--- a/arch/x86/include/asm/irqflags.h
+++ b/arch/x86/include/asm/irqflags.h
@@ -44,9 +44,25 @@ static inline void native_irq_enable(void)
asm volatile("sti": : :"memory");
}

+extern void safe_halt_addr(void);
+
static inline void native_safe_halt(void)
{
- asm volatile("sti; hlt": : :"memory");
+ asm volatile("sti \n\t"
+ /*
+ * If NMI hits us here, it negates the interrupt shadow
+ * induced by STI. So the NMI handler checks for
+ * safe_halt_addr and skips the hlt if it loses the
+ * interrupt shadow.
+ *
+ * If native_safe_halt() is ever instantiated more
+ * than once, this will fail to build, and we'll need
+ * a list of addresses in a special section.
+ */
+ ".globl safe_halt_addr \n\t"
+ "safe_halt_addr: \n\t"
+ "hlt"
+ : : :"memory");
}

static inline void native_halt(void)
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 60788de..f67da48 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -438,6 +438,20 @@ do_nmi(struct pt_regs *regs, long error_code)

inc_irq_stat(__nmi_count);

+ /*
+ * We hit in the middle of an sti; hlt instruction. When we return,
+ * the interrupt shadow cast by sti will no longer be in effect; then,
+ * if an interrupt causes a wakeup, we won't notice it since the hlt
+ * will take effect and block the cpu.
+ *
+ * If we detect this situation, fix it by advancing the instruction
+ * pointer past the hlt instruction; if the interrupt doesn't happen,
+ * we'll spend a few cycles falling asleep again, but that's better
+ * than a missed wakeup.
+ */
+ if (regs->cs == __KERNEL_CS&& regs->ip == (ulong)safe_halt_addr)
+ ++regs->ip;
+
if (!ignore_nmis)
default_do_nmi(regs);



--
error compiling committee.c: too many arguments to function

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/