[116/129] drm/radeon/kms: force legacy pll algo for RV515 LVDS

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Alex Deucher <alexdeucher@xxxxxxxxx>

commit 0d9958b18e10d7426d94cc3dd024920a40db3ee2 upstream.

There has been periodic evidence that LVDS, on at least some
panels, prefers the dividers selected by the legacy pll algo.
This patch forces the use of the legacy pll algo on RV515
LVDS panels.  The old behavior (new pll algo) can be selected
by setting the new_pll module parameter to 1.

Signed-off-by: Alex Deucher <alexdeucher@xxxxxxxxx>
Signed-off-by: Dave Airlie <airlied@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>

---
 drivers/gpu/drm/radeon/atombios_crtc.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -527,6 +527,20 @@ static u32 atombios_adjust_pll(struct dr
 					pll->algo = PLL_ALGO_LEGACY;
 					pll->flags |= RADEON_PLL_PREFER_CLOSEST_LOWER;
 				}
+				/* There is some evidence (often anecdotal) that RV515 LVDS
+				 * (on some boards at least) prefers the legacy algo.  I'm not
+				 * sure whether this should handled generically or on a
+				 * case-by-case quirk basis.  Both algos should work fine in the
+				 * majority of cases.
+				 */
+				if ((radeon_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT)) &&
+				    (rdev->family == CHIP_RV515)) {
+					/* allow the user to overrride just in case */
+					if (radeon_new_pll == 1)
+						pll->algo = PLL_ALGO_NEW;
+					else
+						pll->algo = PLL_ALGO_LEGACY;
+				}
 			} else {
 				if (encoder->encoder_type != DRM_MODE_ENCODER_DAC)
 					pll->flags |= RADEON_PLL_NO_ODD_POST_DIV;


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/