Re: [PATCH 1/4] Dynamic Debug: Introduce global fake module parammodule.ddebug - V3

From: Jason Baron
Date: Fri Sep 17 2010 - 15:56:19 EST


On Thu, Sep 16, 2010 at 12:11:45AM +0200, Thomas Renninger wrote:
> Dynamic Debug allows enabling of pr_debug and dev_dbg messages at runtime.
> This is controlled via /sys/kernel/debug/dynamic_debug/control.
> One major drawback is that the whole initialization of a module cannot be
> tracked, because ddebug is only aware of debug strings of loaded modules.
> But this is the most interesting part...
>
> This patch introduces a fake module parameter module.ddebug(not shown in
> /sys/module/*/parameters, thus it does not use any resources/memory).
>
> If a module passes ddebug as a module parameter (e.g. via module.ddebug
> kernel boot param or via "modprobe module ddebug"), all debug strings of this
> module get activated by issuing "module module_name +p" internally
> (not via sysfs) when the module gets loaded.
>
> Possible enhancements for the future if ddebug might get extended with
> further flags:
> module.ddebug=flags
> Then module.ddebug="p" would be the same as module.ddebug, but if there
> is a "x" ddebug flag added, one could pass:
> module.ddebug="xp"
> which would result in such a dynamic debug query:
> module module_name +xp
>
> Modules must not use "ddebug" as module parameter or it will get ignored.
> If it's tried, a warning will show up at module load time that it will get
> ignored (only works for not built-in modules).
>
> Tested with (additional added pr_debug messages):
> options hp-wmi ddebug
> in modprobe.conf
> -> works and pr_debug messages issued at module initialization time show
> up. Also "p" flag gets set for the whole hp-wmi module:
> grep hp-wmi /sys/../dynamic_debug/control
> also tested with compiled-in modules, e.g. pnp.ddebug and an additional
> patch later in the patch series which instruments pnp code to work with ddebug.
>
> Signed-off-by: Thomas Renninger <trenn@xxxxxxx>
> CC: Bjorn Helgaas <bjorn.helgaas@xxxxxx>
> CC: Jason Baron <jbaron@xxxxxxxxxx>
> CC: Greg KH <gregkh@xxxxxxx>
> CC: lkml <linux-kernel@xxxxxxxxxxxxxxx>
> ---
> Documentation/dynamic-debug-howto.txt | 28 ++++++++++-
> include/linux/dynamic_debug.h | 15 ++++++
> include/linux/moduleparam.h | 3 +
> kernel/module.c | 1 +
> kernel/params.c | 13 +++++-
> lib/dynamic_debug.c | 86 +++++++++++++++++++++++++++++++-
> 6 files changed, 141 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/dynamic-debug-howto.txt b/Documentation/dynamic-debug-howto.txt
> index 58ea64a..ebbbbdd 100644
> --- a/Documentation/dynamic-debug-howto.txt
> +++ b/Documentation/dynamic-debug-howto.txt
> @@ -213,7 +213,7 @@ Note also that there is no convenient syntax to remove all
> the flags at once, you need to use "-psc".
>
>
> -Debug messages during boot process
> +Debug Messages during Boot Process
> ==================================
>
> To be able to activate debug messages during the boot process,
> @@ -232,6 +232,32 @@ PCI (or other devices) initialization also is a hot candidate for using
> this boot parameter for debugging purposes.
>
>
> +Debug Messages at Module Initialization Time
> +============================================
> +
> +Enabling debug messages inside a module is only possible if the module itself
> +is loaded already. If you unload a module, the dynamic debug flags associated
> +to its debug messages are lost.
> +Therefore, enabling debug messages that get processed at module initialization
> +time through the <debugfs>/dynamic_debug/control interface is not possible.
> +Instead, a "ddebug" module paramter can be passed:
> +
> + - via kernel boot parameter:
> + module.ddebug
> +
> + - as an ordinary module parameter via modprobe
> + modprobe module ddebug
> +
> + - or the parameter can be used permanently via modprobe.conf(.local)
> + options module ddebug
> +
> +The ddebug option is not implemented as an ordinary module parameter and thus
> +will not show up in /sys/module/module_name/parameters/ddebug
> +The settings can get reverted through the sysfs interface again when the
> +module got loaded as soon as debug messages are not needed anymore:
> +echo "module module_name -p" > <debugfs>/dynamic_debug/control
> +as described in the "Command Language Reference" chapter above.
> +
> Examples
> ========
>
> diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h
> index 52c0da4..56c0c3a 100644
> --- a/include/linux/dynamic_debug.h
> +++ b/include/linux/dynamic_debug.h
> @@ -39,8 +39,13 @@ struct _ddebug {
> int ddebug_add_module(struct _ddebug *tab, unsigned int n,
> const char *modname);
>
> +struct kernel_param;
> +
> #if defined(CONFIG_DYNAMIC_DEBUG)
> extern int ddebug_remove_module(const char *mod_name);
> +extern int ddebug_exec_query(char *query_string);
> +extern void ddebug_module_parse_args(const char *name, char* args,
> + struct kernel_param *params, unsigned num);
>
> #define __dynamic_dbg_enabled(dd) ({ \
> int __ret = 0; \
> @@ -77,6 +82,16 @@ static inline int ddebug_remove_module(const char *mod)
> {
> return 0;
> }
> +static inline int ddebug_exec_query(char *query_string)
> +{
> + return 0;
> +}
> +static incline void ddebug_module_parse_args(const char *name, char* args,
> + struct kernel_param *params,
> + unsigned num)
> +{
> + return 0;
> +}
>
> #define dynamic_pr_debug(fmt, ...) \
> do { if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); } while (0)
> diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
> index 82a9124..ab0c88c 100644
> --- a/include/linux/moduleparam.h
> +++ b/include/linux/moduleparam.h
> @@ -251,4 +251,7 @@ static inline void module_param_sysfs_remove(struct module *mod)
> { }
> #endif
>
> +/* For being able to parse parameters the same way params.c does */
> +extern char *next_arg(char *args, char **param, char **val);
> +
> #endif /* _LINUX_MODULE_PARAMS_H */
> diff --git a/kernel/module.c b/kernel/module.c
> index d0b5f8d..3912e12 100644
> --- a/kernel/module.c
> +++ b/kernel/module.c
> @@ -2628,6 +2628,7 @@ static struct module *load_module(void __user *umod,
> list_add_rcu(&mod->list, &modules);
> mutex_unlock(&module_mutex);
>
> + ddebug_module_parse_args(mod->name, mod->args, mod->kp, mod->num_kp);
> /* Module is ready to execute: parsing args may do that. */
> err = parse_args(mod->name, mod->args, mod->kp, mod->num_kp, NULL);
> if (err < 0)
> diff --git a/kernel/params.c b/kernel/params.c
> index 0b30ecd..df06dc0 100644
> --- a/kernel/params.c
> +++ b/kernel/params.c
> @@ -54,6 +54,7 @@ static int parse_one(char *param,
> int (*handle_unknown)(char *param, char *val))
> {
> unsigned int i;
> + char *tmp;
>
> /* Find parameter */
> for (i = 0; i < num_params; i++) {
> @@ -64,6 +65,16 @@ static int parse_one(char *param,
> }
> }
>
> + /*
> + * Ignore ddebug module params and module.ddebug boot params:
> + * Documentation/dynamic-debug-howto.txt
> + */
> + tmp = strstr(param, ".ddebug");
> + if (parameq(param, "ddebug") || (tmp && strlen(tmp) == 7)) {
> + DEBUGP("Ignoring ddebug parameter %s\n", param);
> + return 0;
> + }
> +
> if (handle_unknown) {
> DEBUGP("Unknown argument: calling %p\n", handle_unknown);
> return handle_unknown(param, val);
> @@ -75,7 +86,7 @@ static int parse_one(char *param,
>
> /* You can use " around spaces, but can't escape ". */
> /* Hyphens and underscores equivalent in parameter names. */
> -static char *next_arg(char *args, char **param, char **val)
> +char *next_arg(char *args, char **param, char **val)
> {
> unsigned int i, equals = 0;
> int in_quote = 0, quoted = 0;
> diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
> index a687d90..826ea2e 100644
> --- a/lib/dynamic_debug.c
> +++ b/lib/dynamic_debug.c
> @@ -10,6 +10,7 @@
> */
>
> #include <linux/kernel.h>
> +#include <linux/init.h>
> #include <linux/module.h>
> #include <linux/moduleparam.h>
> #include <linux/kallsyms.h>
> @@ -27,9 +28,13 @@
> #include <linux/debugfs.h>
> #include <linux/slab.h>
>
> +#include <asm/setup.h>
> +
> extern struct _ddebug __start___verbose[];
> extern struct _ddebug __stop___verbose[];
>
> +#define DDEBUG_STRING_SIZE 1024
> +
> /* dynamic_debug_enabled, and dynamic_debug_enabled2 are bitmasks in which
> * bit n is set to 1 if any modname hashes into the bucket n, 0 otherwise. They
> * use independent hash functions, to reduce the chance of false positives.
> @@ -429,7 +434,7 @@ static int ddebug_parse_flags(const char *str, unsigned int *flagsp,
> return 0;
> }
>
> -static int ddebug_exec_query(char *query_string)
> +int ddebug_exec_query(char *query_string)
> {
> unsigned int flags = 0, mask = 0;
> struct ddebug_query query;
> @@ -437,6 +442,9 @@ static int ddebug_exec_query(char *query_string)
> int nwords;
> char *words[MAXWORDS];
>
> + if (verbose)
> + printk(KERN_INFO "%s: got query: %s\n", __func__, query_string);
> +
> nwords = ddebug_tokenize(query_string, words, MAXWORDS);
> if (nwords <= 0)
> return -EINVAL;
> @@ -450,10 +458,10 @@ static int ddebug_exec_query(char *query_string)
> return 0;
> }
>
> -static __initdata char ddebug_setup_string[1024];
> +static __initdata char ddebug_setup_string[DDEBUG_STRING_SIZE];
> static __init int ddebug_setup_query(char *str)
> {
> - if (strlen(str) >= 1024) {
> + if (strlen(str) >= DDEBUG_STRING_SIZE) {
> pr_warning("ddebug boot param string too large\n");
> return 0;
> }
> @@ -704,6 +712,76 @@ int ddebug_add_module(struct _ddebug *tab, unsigned int n,
> }
> EXPORT_SYMBOL_GPL(ddebug_add_module);
>
> +/* We search for *ddebug* module params */
> +void ddebug_module_parse_args(const char *name, char* args,
> + struct kernel_param *params, unsigned num)
> +{
> + char ddebug[DDEBUG_STRING_SIZE], *param, *val, *args_it, *arg_dup_ptr;
> + int i;
> +
> + /*
> + * We must not modify the passed args string and need to store the
> + * kstrdup pointer to be able to free memory later, TBD: find a way
> + * to do this nicer
> + */
> + arg_dup_ptr = args_it = kstrdup(args, GFP_KERNEL);
> +
> + if (verbose)
> + printk(KERN_INFO "%s: Parsing ARGS: -%s- of %s\n",
> + __func__, args_it, name);
> +
> + for (i = 0; i < num; i++) {
> + if (!strcmp("ddebug", params[i].name))
> + pr_warning("Module %s uses reserved keyword "
> + "*ddebug* as parameter\n", name);
> + }
> +
> + /* Chew leading spaces */
> + args_it = skip_spaces(args_it);
> +
> + while (*args_it) {
> + args_it = next_arg(args_it, &param, &val);
> + if (verbose)
> + printk(KERN_INFO "%s: Param: %s, val: %s\n",
> + __func__, param, val);
> + if (!strcmp(param, "ddebug")) {
> + pr_info("Enabling debugging for module %s\n", name);
> + snprintf(ddebug, DDEBUG_STRING_SIZE, "module %s +p",
> + name);
> + ddebug_exec_query(ddebug);
> + }
> + }
> + kfree(arg_dup_ptr);
> + if (verbose)
> + printk(KERN_INFO "%s: Finished %s parsing\n", __func__, name);
> +}
> +/* We search for module.ddebug kernel boot params */
> +static void ddebug_boot_parse_args(void)
> +{
> + char tmp_cmd_arr[COMMAND_LINE_SIZE], *tmp_cmd_ptr, *param, *val, *tmp;
> + char module[MODULE_NAME_LEN], ddebug[DDEBUG_STRING_SIZE];
> +
> + /* next_arg touches the passed buffer and chops each argument */
> + strlcpy(tmp_cmd_arr, saved_command_line, COMMAND_LINE_SIZE);
> + /* Chew leading spaces */
> + tmp_cmd_ptr = skip_spaces(tmp_cmd_arr);
> +
> + while (*tmp_cmd_ptr) {
> + tmp_cmd_ptr = next_arg(tmp_cmd_ptr, &param, &val);
> + if (verbose)
> + printk(KERN_INFO "%s: Param: %s, val: %s\n",
> + __func__, param, val);
> + tmp = strstr(param, ".ddebug");
> + if (tmp && strlen(tmp) == 7) {
> + strlcpy(module, param, tmp - param + 1);
> + pr_info("Enabling debugging for module %s\n", module);
> + snprintf(ddebug, DDEBUG_STRING_SIZE, "module %s +p",
> + module);
> + ddebug_exec_query(ddebug);
> + }
> + }
> +}
> +
> static void ddebug_table_free(struct ddebug_table *dt)
> {
> list_del_init(&dt->link);
> @@ -805,6 +883,8 @@ static int __init dynamic_debug_init(void)
> ddebug_setup_string);
> }
>
> + ddebug_boot_parse_args();
> +
> out_free:
> if (ret)
> ddebug_remove_all_tables();
> --
> 1.6.0.2
>

Hi,

So i'm wondering if need to support the module.ddebug on the command
line? The ddebug_query="module foo +p" format that you introduced does
the same thing.

Also, we can't put those large char[] arrays on the kernel stack. They
probably should be global.

thanks,

-Jason
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/