Re: ARM target not boot after remap memory

[Russell King - ARM Linux]

BTW, Please do not drop CCs.

On Mon, Sep 13, 2010 at 02:48:18PM +0200, Robin Theunis wrote:
> Hi Russell,
> 
> Yes I have tested it. I made a breakpoint at 0x2008000 and viewed that
> the r1 register and there in I found the correct ID.
> 
> Robin
> 
> 2010/9/13 Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>:
> > On Mon, Sep 13, 2010 at 02:07:51PM +0200, Mike Rapoport wrote:
> >> (add LAKLM to CC)
> >
> >>> The problem is now when linux kernel is booting, nothing happens.
> >>>
> >>> ---
> >>> U-Boot> bootm
> >>> ## Booting kernel from Legacy Image at 21000000 ...
> >>>    Image Name:   Linux-2.6.34.1robin9200v1.0
> >>>    Image Type:   ARM Linux Kernel Image (uncompressed)
> >>>    Data Size:    1811796 Bytes = 1.7 MiB
> >>>    Load Address: 20008000
> >>>    Entry Point:  20008000
> >>>    Verifying Checksum ... OK
> >>>    Loading Kernel Image ... OK
> >>> OK
> >>>
> >>> Starting kernel ...
> >>>
> >>> Uncompressing Linux... done, booting the kernel.
> >>> ---
> >>>
> >>> Here is stalls. With my jtag probe I can locate the problem.
> >>>
> >>> ---
> >>>> halt
> >>> target state: halted
> >>> target halted in ARM state due to debug-request, current mode: Supervisor
> >>> cpsr: 0x600000d3 pc: 0xc000af3c
> >>> MMU: enabled, D-Cache: enabled, I-Cache: enabled
> >>>>   arm disassemble 0xc000af3c
> >>> 0xc000af3c   0xeafffffe      B 0xc000af3c
> >
> > Probably __error.  Either your machine isn't supported, or the kernel
> > doesn't recognise your processor.
> >
> > Is your version of uboot sufficiently recent that it passes the correct
> > machine ID in r1 ?
> >
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/