GA-MA69VM-S2 requires pci=nocrs with 2.6.35.4
From: Simon Arlott
Date: Thu Sep 09 2010 - 08:16:56 EST
With a Gigabyte GA-MA69VM-S2 690V motherboard, it stalls in
qurk_usb_early_handoff unless pci=nocrs is used:
[ 299.177004] calling pci_apply_final_quirks+0x0/0x11e @ 1
[ 299.177004] pci 0000:00:00.0: pci_apply_final_quirks
[ 299.177004] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x21
[ 299.177004] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x5dd
[ 299.177004] pci 0000:00:00.0: calling pci_fixup_video+0x0/0x9c
[ 299.177004] pci 0000:00:01.0: pci_apply_final_quirks
[ 299.177004] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x21
[ 299.177004] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x5dd
[ 299.177004] pci 0000:00:01.0: calling pci_fixup_video+0x0/0x9c
[ 299.177004] pci 0000:00:12.0: pci_apply_final_quirks
[ 299.177004] pci 0000:00:12.0: calling quirk_cardbus_legacy+0x0/0x21
[ 299.177004] pci 0000:00:12.0: calling quirk_usb_early_handoff+0x0/0x5dd
[ 299.177004] pci 0000:00:12.0: calling pci_fixup_video+0x0/0x9c
[ 299.177004] pci 0000:00:13.0: pci_apply_final_quirks
[ 299.177004] pci 0000:00:13.0: calling quirk_cardbus_legacy+0x0/0x21
[ 299.177004] pci 0000:00:13.0: calling quirk_usb_early_handoff+0x0/0x5dd
Full dmesg with/without pci=nocrs attached.
--
Simon Arlott[ 0.000000] Linux version 2.6.35.4-git+ (byte@proxima) (gcc version 4.3.1 (Gentoo 4.3.1 p1.0) ) #git+ SMP PREEMPT 2010-08-25T23:29:08+0100
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007dee0000 (usable)
[ 0.000000] BIOS-e820: 000000007dee0000 - 000000007dee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007dee3000 - 000000007def0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007def0000 - 000000007df00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x7dee0 max_arch_pfn = 0x1000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f5140] f5140
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[ 0.000000] ACPI: RSDP 000f6b00 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 7dee3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 7dee3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 7dee30c0 049B3 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 7dee0000 00040
[ 0.000000] ACPI: SSDT 7dee7b40 00248 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 7dee7dc0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 7dee7e00 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 7dee7a80 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] 1122MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037bfe
[ 0.000000] HighMem 0x00037bfe -> 0x0007dee0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007dee0
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] Allocating PCI resources starting at 7df00000 (gap: 7df00000:62100000)
[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @c2000000 s30400 r0 d22848 u1048576
[ 0.000000] pcpu-alloc: s30400 r0 d22848 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511680
[ 0.000000] Kernel command line: root=/dev/sda1 ro panic=10 init=/startup sysrq_always_enabled console=ttyS0,115200 vga=0xf07 initcall_debug=1 tsc=reliable
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Subtract (44 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0000200000 - 0000c781e4] TEXT DATA BSS
[ 0.000000] #3 [0000c79000 - 0000c810fe] BRK
[ 0.000000] #4 [00000f5150 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000f5140 - 00000f5150] MP-table mpf
[ 0.000000] #6 [000009f800 - 00000f0f00] BIOS reserved
[ 0.000000] #7 [00000f1054 - 00000f5140] BIOS reserved
[ 0.000000] #8 [00000f0f00 - 00000f1054] MP-table mpc
[ 0.000000] #9 [0000002000 - 0000003000] TRAMPOLINE
[ 0.000000] #10 [0000007000 - 0000008000] PGTABLE
[ 0.000000] #11 [0001000000 - 0001001000] BOOTMEM
[ 0.000000] #12 [0001001000 - 0001fc1000] BOOTMEM
[ 0.000000] #13 [0001fc1000 - 0001fc1004] BOOTMEM
[ 0.000000] #14 [0001fc1040 - 0001fc1280] BOOTMEM
[ 0.000000] #15 [0001fc1280 - 0001fc1328] BOOTMEM
[ 0.000000] #16 [0001fc1340 - 0001fca340] BOOTMEM
[ 0.000000] #17 [0001fca340 - 0001fca414] BOOTMEM
[ 0.000000] #18 [0001fca440 - 0001fdc440] BOOTMEM
[ 0.000000] #19 [0001fdc440 - 0001fdc46d] BOOTMEM
[ 0.000000] #20 [0001fdc480 - 0001fdc4af] BOOTMEM
[ 0.000000] #21 [0001fdc4c0 - 0001fdc628] BOOTMEM
[ 0.000000] #22 [0001fdc640 - 0001fdc680] BOOTMEM
[ 0.000000] #23 [0001fdc680 - 0001fdc6c0] BOOTMEM
[ 0.000000] #24 [0001fdc6c0 - 0001fdc700] BOOTMEM
[ 0.000000] #25 [0001fdc700 - 0001fdc740] BOOTMEM
[ 0.000000] #26 [0001fdc740 - 0001fdc780] BOOTMEM
[ 0.000000] #27 [0001fdc780 - 0001fdc7c0] BOOTMEM
[ 0.000000] #28 [0001fdc7c0 - 0001fdc800] BOOTMEM
[ 0.000000] #29 [0001fdc800 - 0001fdc840] BOOTMEM
[ 0.000000] #30 [0001fdc840 - 0001fdc880] BOOTMEM
[ 0.000000] #31 [0001fdc880 - 0001fdc8fb] BOOTMEM
[ 0.000000] #32 [0001fdc900 - 0001fdc97b] BOOTMEM
[ 0.000000] #33 [0002000000 - 000200d000] BOOTMEM
[ 0.000000] #34 [0002100000 - 000210d000] BOOTMEM
[ 0.000000] #35 [0001fde980 - 0001fde984] BOOTMEM
[ 0.000000] #36 [0001fde9c0 - 0001fde9c4] BOOTMEM
[ 0.000000] #37 [0001fdea00 - 0001fdea08] BOOTMEM
[ 0.000000] #38 [0001fdea40 - 0001fdea48] BOOTMEM
[ 0.000000] #39 [0001fdea80 - 0001fdeb20] BOOTMEM
[ 0.000000] #40 [0001fdeb40 - 0001fdeb88] BOOTMEM
[ 0.000000] #41 [0001fdebc0 - 0001fe2bc0] BOOTMEM
[ 0.000000] #42 [000200d000 - 000208d000] BOOTMEM
[ 0.000000] #43 [000208d000 - 00020cd000] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0007dee0)
[ 0.000000] Memory: 2034932k/2063232k available (3157k kernel code, 27908k reserved, 1766k data, 376k init, 1149832k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc06cf000 - 0xc072d000 ( 376 kB)
[ 0.000000] .data : 0xc0515612 - 0xc06ceff4 (1766 kB)
[ 0.000000] .text : 0xc0200000 - 0xc0515612 (3157 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:320
[ 0.000000] Console: colour VGA+ 80x60
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3567 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2305.362 MHz processor.
[ 0.003003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4610.72 BogoMIPS (lpj=2305362)
[ 0.005004] pid_max: default: 32768 minimum: 301
[ 0.006071] Security Framework initialized
[ 0.007065] TCP/UDP port access control v1.1 LSM initialised
[ 0.008045] Mount-cache hash table entries: 512
[ 0.010056] CPU: Physical Processor ID: 0
[ 0.011003] CPU: Processor Core ID: 0
[ 0.012004] mce: CPU supports 5 MCE banks
[ 0.013011] using C1E aware idle routine
[ 0.014009] Performance Events: AMD PMU driver.
[ 0.016010] ... version: 0
[ 0.017003] ... bit width: 48
[ 0.018003] ... generic registers: 4
[ 0.019003] ... value mask: 0000ffffffffffff
[ 0.020003] ... max period: 00007fffffffffff
[ 0.021003] ... fixed-purpose events: 0
[ 0.022003] ... event mask: 000000000000000f
[ 0.024284] Freeing SMP alternatives: 16k freed
[ 0.025017] ACPI: Core revision 20100428
[ 0.037039] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.038565] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.049049] CPU0: AMD Athlon(tm) Dual Core Processor 4450e stepping 02
[ 0.052999] calling migration_init+0x0/0x47 @ 1
[ 0.053007] initcall migration_init+0x0/0x47 returned 0 after 0 usecs
[ 0.054003] calling spawn_ksoftirqd+0x0/0x43 @ 1
[ 0.056043] initcall spawn_ksoftirqd+0x0/0x43 returned 0 after 976 usecs
[ 0.057004] calling init_call_single_data+0x0/0x80 @ 1
[ 0.058004] initcall init_call_single_data+0x0/0x80 returned 0 after 0 usecs
[ 0.059004] calling cpu_stop_init+0x0/0x9b @ 1
[ 0.061016] initcall cpu_stop_init+0x0/0x9b returned 0 after 976 usecs
[ 0.062003] calling spawn_softlockup_task+0x0/0x5f @ 1
[ 0.064016] initcall spawn_softlockup_task+0x0/0x5f returned 0 after 976 usecs
[ 0.067009] lockdep: fixing up alternatives.
[ 0.068103] Booting Node 0, Processors #1 Ok.
[ 0.003999] Initializing CPU#1
[ 0.141083] Brought up 2 CPUs
[ 0.142003] Total of 2 processors activated (9221.11 BogoMIPS).
[ 0.144267] calling init_mmap_min_addr+0x0/0x11 @ 1
[ 0.149007] initcall init_mmap_min_addr+0x0/0x11 returned 0 after 0 usecs
[ 0.156005] calling init_cpufreq_transition_notifier_list+0x0/0x18 @ 1
[ 0.162007] initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 after 0 usecs
[ 0.171004] calling net_ns_init+0x0/0x162 @ 1
[ 0.175032] initcall net_ns_init+0x0/0x162 returned 0 after 0 usecs
[ 0.182004] calling cpufreq_tsc+0x0/0x25 @ 1
[ 0.186004] initcall cpufreq_tsc+0x0/0x25 returned 0 after 0 usecs
[ 0.192004] calling pci_reboot_init+0x0/0x11 @ 1
[ 0.197006] initcall pci_reboot_init+0x0/0x11 returned 0 after 0 usecs
[ 0.203004] calling reboot_init+0x0/0x11 @ 1
[ 0.208011] initcall reboot_init+0x0/0x11 returned 0 after 0 usecs
[ 0.214003] calling init_lapic_sysfs+0x0/0x28 @ 1
[ 0.219064] initcall init_lapic_sysfs+0x0/0x28 returned 0 after 0 usecs
[ 0.226007] calling init_smp_flush+0x0/0x2a @ 1
[ 0.230004] initcall init_smp_flush+0x0/0x2a returned 0 after 0 usecs
[ 0.237004] calling sysctl_init+0x0/0x2d @ 1
[ 0.241006] initcall sysctl_init+0x0/0x2d returned 0 after 0 usecs
[ 0.247004] calling ksysfs_init+0x0/0x74 @ 1
[ 0.251012] initcall ksysfs_init+0x0/0x74 returned 0 after 976 usecs
[ 0.258003] calling async_init+0x0/0x50 @ 1
[ 0.262017] initcall async_init+0x0/0x50 returned 0 after 0 usecs
[ 0.263004] calling init_jiffies_clocksource+0x0/0xf @ 1
[ 0.264005] initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 usecs
[ 0.265003] calling pm_init+0x0/0x2d @ 1
[ 0.266010] initcall pm_init+0x0/0x2d returned 0 after 0 usecs
[ 0.267003] calling init_hw_breakpoint+0x0/0xaf @ 1
[ 0.268005] initcall init_hw_breakpoint+0x0/0xaf returned 0 after 0 usecs
[ 0.270004] calling init_zero_pfn+0x0/0x14 @ 1
[ 0.271003] initcall init_zero_pfn+0x0/0x14 returned 0 after 0 usecs
[ 0.272003] calling filelock_init+0x0/0x27 @ 1
[ 0.273013] initcall filelock_init+0x0/0x27 returned 0 after 0 usecs
[ 0.274004] calling init_script_binfmt+0x0/0x11 @ 1
[ 0.275021] initcall init_script_binfmt+0x0/0x11 returned 0 after 0 usecs
[ 0.276003] calling init_elf_binfmt+0x0/0x11 @ 1
[ 0.277003] initcall init_elf_binfmt+0x0/0x11 returned 0 after 0 usecs
[ 0.278004] calling random32_init+0x0/0xa8 @ 1
[ 0.279004] initcall random32_init+0x0/0xa8 returned 0 after 0 usecs
[ 0.280004] calling cpufreq_core_init+0x0/0x7b @ 1
[ 0.281007] initcall cpufreq_core_init+0x0/0x7b returned 0 after 0 usecs
[ 0.282004] calling cpuidle_init+0x0/0x32 @ 1
[ 0.283011] initcall cpuidle_init+0x0/0x32 returned 0 after 0 usecs
[ 0.284004] calling sock_init+0x0/0x51 @ 1
[ 0.285123] initcall sock_init+0x0/0x51 returned 0 after 0 usecs
[ 0.286004] calling netlink_proto_init+0x0/0x108 @ 1
[ 0.287040] NET: Registered protocol family 16
[ 0.288055] initcall netlink_proto_init+0x0/0x108 returned 0 after 976 usecs
[ 0.289003] calling bdi_class_init+0x0/0x2f @ 1
[ 0.290031] initcall bdi_class_init+0x0/0x2f returned 0 after 0 usecs
[ 0.291005] calling kobject_uevent_init+0x0/0x1e @ 1
[ 0.292017] initcall kobject_uevent_init+0x0/0x1e returned 0 after 0 usecs
[ 0.293003] calling pcibus_class_init+0x0/0x14 @ 1
[ 0.295030] initcall pcibus_class_init+0x0/0x14 returned 0 after 976 usecs
[ 0.296004] calling pci_driver_init+0x0/0xf @ 1
[ 0.297039] initcall pci_driver_init+0x0/0xf returned 0 after 0 usecs
[ 0.298005] calling tty_class_init+0x0/0x2f @ 1
[ 0.299029] initcall tty_class_init+0x0/0x2f returned 0 after 0 usecs
[ 0.300005] calling vtconsole_class_init+0x0/0xa1 @ 1
[ 0.301075] initcall vtconsole_class_init+0x0/0xa1 returned 0 after 0 usecs
[ 0.302005] calling i2c_init+0x0/0x57 @ 1
[ 0.303061] initcall i2c_init+0x0/0x57 returned 0 after 0 usecs
[ 0.304008] calling amd_postcore_init+0x0/0xa72 @ 1
[ 0.305010] TOM: 0000000080000000 aka 2048M
[ 0.306038] initcall amd_postcore_init+0x0/0xa72 returned 0 after 976 usecs
[ 0.307004] calling arch_kdebugfs_init+0x0/0x11 @ 1
[ 0.308004] initcall arch_kdebugfs_init+0x0/0x11 returned 0 after 0 usecs
[ 0.309003] calling init_pit_clocksource+0x0/0x98 @ 1
[ 0.310003] initcall init_pit_clocksource+0x0/0x98 returned 0 after 0 usecs
[ 0.311003] calling mtrr_if_init+0x0/0x44 @ 1
[ 0.312008] initcall mtrr_if_init+0x0/0x44 returned 0 after 0 usecs
[ 0.313003] calling ffh_cstate_init+0x0/0x27 @ 1
[ 0.314003] initcall ffh_cstate_init+0x0/0x27 returned -1 after 0 usecs
[ 0.315004] initcall ffh_cstate_init+0x0/0x27 returned with error code -1
[ 0.316004] calling acpi_pci_init+0x0/0x51 @ 1
[ 0.317019] ACPI: bus type pci registered
[ 0.318003] initcall acpi_pci_init+0x0/0x51 returned 0 after 976 usecs
[ 0.319003] calling dmi_id_init+0x0/0x26e @ 1
[ 0.320081] initcall dmi_id_init+0x0/0x26e returned 0 after 0 usecs
[ 0.321008] calling pci_arch_init+0x0/0x62 @ 1
[ 0.322035] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.323004] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.324002] PCI: Using MMCONFIG for extended config space
[ 0.325003] PCI: Using configuration type 1 for base access
[ 0.326015] initcall pci_arch_init+0x0/0x62 returned 0 after 3906 usecs
[ 0.327003] calling topology_init+0x0/0x46 @ 1
[ 0.328050] initcall topology_init+0x0/0x46 returned 0 after 0 usecs
[ 0.329010] calling mtrr_init_finialize+0x0/0x35 @ 1
[ 0.330004] initcall mtrr_init_finialize+0x0/0x35 returned 0 after 0 usecs
[ 0.331003] calling param_sysfs_init+0x0/0x18e @ 1
[ 0.342111] initcall param_sysfs_init+0x0/0x18e returned 0 after 9765 usecs
[ 0.343048] calling pm_sysrq_init+0x0/0x16 @ 1
[ 0.344022] initcall pm_sysrq_init+0x0/0x16 returned 0 after 0 usecs
[ 0.345004] calling init_slow_work+0x0/0x32 @ 1
[ 0.346004] initcall init_slow_work+0x0/0x32 returned 0 after 0 usecs
[ 0.347005] calling default_bdi_init+0x0/0xa4 @ 1
[ 0.348090] initcall default_bdi_init+0x0/0xa4 returned 0 after 0 usecs
[ 0.349055] calling init_bio+0x0/0xb9 @ 1
[ 0.350112] bio: create slab <bio-0> at 0
[ 0.351012] initcall init_bio+0x0/0xb9 returned 0 after 976 usecs
[ 0.352003] calling fsnotify_init+0x0/0x19 @ 1
[ 0.353008] initcall fsnotify_init+0x0/0x19 returned 0 after 0 usecs
[ 0.354003] calling fsnotify_notification_init+0x0/0xe7 @ 1
[ 0.355023] initcall fsnotify_notification_init+0x0/0xe7 returned 0 after 0 usecs
[ 0.356003] calling cryptomgr_init+0x0/0xf @ 1
[ 0.357005] initcall cryptomgr_init+0x0/0xf returned 0 after 0 usecs
[ 0.358003] calling blk_settings_init+0x0/0x1d @ 1
[ 0.359003] initcall blk_settings_init+0x0/0x1d returned 0 after 0 usecs
[ 0.360003] calling blk_ioc_init+0x0/0x24 @ 1
[ 0.361013] initcall blk_ioc_init+0x0/0x24 returned 0 after 0 usecs
[ 0.362003] calling blk_softirq_init+0x0/0x51 @ 1
[ 0.363004] initcall blk_softirq_init+0x0/0x51 returned 0 after 0 usecs
[ 0.364003] calling blk_iopoll_setup+0x0/0x51 @ 1
[ 0.365004] initcall blk_iopoll_setup+0x0/0x51 returned 0 after 0 usecs
[ 0.366003] calling genhd_device_init+0x0/0x50 @ 1
[ 0.367051] initcall genhd_device_init+0x0/0x50 returned 0 after 0 usecs
[ 0.368010] calling pci_slot_init+0x0/0x3b @ 1
[ 0.369006] initcall pci_slot_init+0x0/0x3b returned 0 after 0 usecs
[ 0.370003] calling acpi_init+0x0/0x2b6 @ 1
[ 0.378873] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.392585] ACPI: Interpreter enabled
[ 0.396003] ACPI: (supports S0 S5)
[ 0.399586] ACPI: Using IOAPIC for interrupt routing
[ 0.419060] initcall acpi_init+0x0/0x2b6 returned 0 after 46875 usecs
[ 0.425024] calling dock_init+0x0/0x81 @ 1
[ 0.430047] ACPI: No dock devices found.
[ 0.434004] initcall dock_init+0x0/0x81 returned 0 after 4882 usecs
[ 0.440004] calling acpi_pci_root_init+0x0/0x2a @ 1
[ 0.445005] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.454232] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.461348] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.468004] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.474004] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.481004] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.489004] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.496049] pci 0000:00:00.0: calling quirk_no_ata_d3+0x0/0x1c
[ 0.502029] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x1cf
[ 0.509067] pci 0000:00:01.0: calling quirk_no_ata_d3+0x0/0x1c
[ 0.515020] pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x1cf
[ 0.521079] pci 0000:00:12.0: calling quirk_no_ata_d3+0x0/0x1c
[ 0.527074] pci 0000:00:12.0: calling quirk_amd_ide_mode+0x0/0xc2
[ 0.533006] pci 0000:00:12.0: calling quirk_resource_alignment+0x0/0x1cf
[ 0.540058] pci 0000:00:13.0: calling quirk_no_ata_d3+0x0/0x1c
[ 0.546061] pci 0000:00:13.0: calling quirk_resource_alignment+0x0/0x1cf
[ 0.553023] pci 0000:00:13.1: calling quirk_no_ata_d3+0x0/0x1c
[ 0.559060] pci 0000:00:13.1: calling quirk_resource_alignment+0x0/0x1cf
[ 0.565024] pci 0000:00:13.2: calling quirk_no_ata_d3+0x0/0x1c
[ 0.571060] pci 0000:00:13.2: calling quirk_resource_alignment+0x0/0x1cf
[ 0.578023] pci 0000:00:13.3: calling quirk_no_ata_d3+0x0/0x1c
[ 0.584060] pci 0000:00:13.3: calling quirk_resource_alignment+0x0/0x1cf
[ 0.591024] pci 0000:00:13.4: calling quirk_no_ata_d3+0x0/0x1c
[ 0.596060] pci 0000:00:13.4: calling quirk_resource_alignment+0x0/0x1cf
[ 0.603039] pci 0000:00:13.5: calling quirk_no_ata_d3+0x0/0x1c
[ 0.609060] pci 0000:00:13.5: calling quirk_resource_alignment+0x0/0x1cf
[ 0.616079] pci 0000:00:14.0: calling quirk_no_ata_d3+0x0/0x1c
[ 0.622004] pci 0000:00:14.0: calling sb600_disable_hpet_bar+0x0/0x4f
[ 0.628068] pci 0000:00:14.0: calling force_disable_hpet_msi+0x0/0xc
[ 0.635004] pci 0000:00:14.0: calling quirk_resource_alignment+0x0/0x1cf
[ 0.641052] pci 0000:00:14.1: calling quirk_no_ata_d3+0x0/0x1c
[ 0.647073] pci 0000:00:14.1: calling quirk_resource_alignment+0x0/0x1cf
[ 0.654061] pci 0000:00:14.2: calling quirk_no_ata_d3+0x0/0x1c
[ 0.660060] pci 0000:00:14.2: calling quirk_resource_alignment+0x0/0x1cf
[ 0.667061] pci 0000:00:14.3: calling quirk_no_ata_d3+0x0/0x1c
[ 0.673034] pci 0000:00:14.3: calling quirk_resource_alignment+0x0/0x1cf
[ 0.679037] pci 0000:00:14.4: calling quirk_no_ata_d3+0x0/0x1c
[ 0.685027] pci 0000:00:14.4: calling quirk_resource_alignment+0x0/0x1cf
[ 0.692053] pci 0000:00:18.0: calling quirk_resource_alignment+0x0/0x1cf
[ 0.699045] pci 0000:00:18.1: calling quirk_resource_alignment+0x0/0x1cf
[ 0.705036] pci 0000:00:18.2: calling quirk_resource_alignment+0x0/0x1cf
[ 0.712039] pci 0000:00:18.3: calling quirk_resource_alignment+0x0/0x1cf
[ 0.719076] pci 0000:01:05.0: calling quirk_no_ata_d3+0x0/0x1c
[ 0.725044] pci 0000:01:05.0: calling quirk_resource_alignment+0x0/0x1cf
[ 0.732044] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.737166] pci 0000:02:07.0: calling quirk_resource_alignment+0x0/0x1cf
[ 0.744006] pci 0000:02:07.0: calling pci_fixup_transparent_bridge+0x0/0x2b
[ 0.751179] pci 0000:02:07.1: calling quirk_resource_alignment+0x0/0x1cf
[ 0.758004] pci 0000:02:07.1: calling pci_fixup_transparent_bridge+0x0/0x2b
[ 0.765127] pci 0000:02:0f.0: calling quirk_resource_alignment+0x0/0x1cf
[ 0.771083] pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.823054] initcall acpi_pci_root_init+0x0/0x2a returned 0 after 369140 usecs
[ 0.830005] calling acpi_pci_link_init+0x0/0x3f @ 1
[ 0.835182] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.843150] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.851093] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.858345] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.866343] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.874342] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.882346] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.890148] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.898018] initcall acpi_pci_link_init+0x0/0x3f returned 0 after 61523 usecs
[ 0.899005] calling pnp_init+0x0/0xf @ 1
[ 0.900043] initcall pnp_init+0x0/0xf returned 0 after 0 usecs
[ 0.901004] calling misc_init+0x0/0x9b @ 1
[ 0.902057] initcall misc_init+0x0/0x9b returned 0 after 0 usecs
[ 0.903005] calling vga_arb_device_init+0x0/0x68 @ 1
[ 0.904140] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.905012] vgaarb: loaded
[ 0.906003] initcall vga_arb_device_init+0x0/0x68 returned 0 after 1953 usecs
[ 0.907003] calling init_scsi+0x0/0x74 @ 1
[ 0.909059] SCSI subsystem initialized
[ 0.912009] initcall init_scsi+0x0/0x74 returned 0 after 3906 usecs
[ 0.919003] calling ata_init+0x0/0x2ab @ 1
[ 0.923021] initcall ata_init+0x0/0x2ab returned 0 after 0 usecs
[ 0.924007] calling usb_init+0x0/0xfa @ 1
[ 0.925078] usbcore: registered new interface driver usbfs
[ 0.926067] usbcore: registered new interface driver hub
[ 0.927050] usbcore: registered new device driver usb
[ 0.932006] initcall usb_init+0x0/0xfa returned 0 after 6835 usecs
[ 0.939003] calling serio_init+0x0/0x73 @ 1
[ 0.943046] initcall serio_init+0x0/0x73 returned 0 after 0 usecs
[ 0.944009] calling input_init+0x0/0x10f @ 1
[ 0.946000] initcall input_init+0x0/0x10f returned 0 after 976 usecs
[ 0.952009] calling power_supply_class_init+0x0/0x39 @ 1
[ 0.957032] initcall power_supply_class_init+0x0/0x39 returned 0 after 0 usecs
[ 0.965005] calling hwmon_init+0x0/0xf3 @ 1
[ 0.969033] initcall hwmon_init+0x0/0xf3 returned 0 after 0 usecs
[ 0.975006] calling thermal_init+0x0/0x46 @ 1
[ 0.980029] initcall thermal_init+0x0/0x46 returned 0 after 976 usecs
[ 0.986005] calling md_init+0x0/0xb7 @ 1
[ 0.990013] initcall md_init+0x0/0xb7 returned 0 after 0 usecs
[ 0.996004] calling init_soundcore+0x0/0x83 @ 1
[ 1.001026] initcall init_soundcore+0x0/0x83 returned 0 after 976 usecs
[ 1.007004] calling alsa_sound_init+0x0/0x88 @ 1
[ 1.012074] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 1.018004] initcall alsa_sound_init+0x0/0x88 returned 0 after 5859 usecs
[ 1.025004] calling pci_subsys_init+0x0/0x44 @ 1
[ 1.030002] PCI: Using ACPI for IRQ routing
[ 1.034049] pci 0000:00:14.0: no compatible bridge window for [mem 0xfed00000-0xfed003ff]
[ 1.042119] calling proto_init+0x0/0xf @ 1
[ 1.047009] initcall proto_init+0x0/0xf returned 0 after 0 usecs
[ 1.053004] calling net_dev_init+0x0/0x1d5 @ 1
[ 1.058013] initcall net_dev_init+0x0/0x1d5 returned 0 after 976 usecs
[ 1.064004] calling neigh_init+0x0/0x66 @ 1
[ 1.068004] initcall neigh_init+0x0/0x66 returned 0 after 0 usecs
[ 1.074003] calling fib_rules_init+0x0/0x99 @ 1
[ 1.079005] initcall fib_rules_init+0x0/0x99 returned 0 after 0 usecs
[ 1.086003] calling pktsched_init+0x0/0xce @ 1
[ 1.090024] initcall pktsched_init+0x0/0xce returned 0 after 0 usecs
[ 1.096003] calling tc_filter_init+0x0/0x43 @ 1
[ 1.101003] initcall tc_filter_init+0x0/0x43 returned 0 after 0 usecs
[ 1.108003] calling tc_action_init+0x0/0x43 @ 1
[ 1.112004] initcall tc_action_init+0x0/0x43 returned 0 after 0 usecs
[ 1.119003] calling genl_init+0x0/0x77 @ 1
[ 1.123070] initcall genl_init+0x0/0x77 returned 0 after 0 usecs
[ 1.129004] calling atm_init+0x0/0xbc @ 1
[ 1.133004] NET: Registered protocol family 8
[ 1.137002] NET: Registered protocol family 20
[ 1.142031] initcall atm_init+0x0/0xbc returned 0 after 8789 usecs
[ 1.148009] calling sysctl_init+0x0/0x3b @ 1
[ 1.152005] initcall sysctl_init+0x0/0x3b returned 0 after 0 usecs
[ 1.159004] calling print_ICs+0x0/0x4e1 @ 1
[ 1.163003] initcall print_ICs+0x0/0x4e1 returned 0 after 0 usecs
[ 1.169003] calling hpet_late_init+0x0/0x22e @ 1
[ 1.174010] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.179199] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 1.187003] initcall hpet_late_init+0x0/0x22e returned 0 after 12695 usecs
[ 1.194003] calling init_k8_nbs+0x0/0x21 @ 1
[ 1.198067] initcall init_k8_nbs+0x0/0x21 returned 0 after 0 usecs
[ 1.204004] calling clocksource_done_booting+0x0/0x53 @ 1
[ 1.210005] Switching to clocksource hpet
[ 1.214099] initcall clocksource_done_booting+0x0/0x53 returned 0 after 3926 usecs
[ 1.221608] calling init_pipe_fs+0x0/0x3d @ 1
[ 1.226144] initcall init_pipe_fs+0x0/0x3d returned 0 after 77 usecs
[ 1.232501] calling eventpoll_init+0x0/0xb9 @ 1
[ 1.237178] initcall eventpoll_init+0x0/0xb9 returned 0 after 47 usecs
[ 1.243717] calling anon_inode_init+0x0/0xf5 @ 1
[ 1.248499] initcall anon_inode_init+0x0/0xf5 returned 0 after 65 usecs
[ 1.255122] calling blk_scsi_ioctl_init+0x0/0x294 @ 1
[ 1.260275] initcall blk_scsi_ioctl_init+0x0/0x294 returned 0 after 2 usecs
[ 1.267246] calling acpi_event_init+0x0/0x46 @ 1
[ 1.271975] initcall acpi_event_init+0x0/0x46 returned 0 after 14 usecs
[ 1.278599] calling pnpacpi_init+0x0/0x7b @ 1
[ 1.283053] pnp: PnP ACPI init
[ 1.286148] ACPI: bus type pnp registered
[ 1.291339] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:02:0f.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 1.308933] pnp: PnP ACPI: found 14 devices
[ 1.313140] ACPI: ACPI bus type pnp unregistered
[ 1.317770] initcall pnpacpi_init+0x0/0x7b returned 0 after 33901 usecs
[ 1.324396] calling pnp_system_init+0x0/0xf @ 1
[ 1.329050] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 1.334980] system 00:01: [io 0x0220-0x0225] has been reserved
[ 1.340907] system 00:01: [io 0x0290-0x0294] has been reserved
[ 1.346843] system 00:02: [io 0x4100-0x411f] has been reserved
[ 1.352774] system 00:02: [io 0x0228-0x022f] has been reserved
[ 1.358700] system 00:02: [io 0x040b] has been reserved
[ 1.364023] system 00:02: [io 0x04d6] has been reserved
[ 1.369344] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 1.375273] system 00:02: [io 0x0c14] has been reserved
[ 1.380593] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 1.386520] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
[ 1.392449] system 00:02: [io 0x0c6f] has been reserved
[ 1.397770] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 1.403697] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 1.409626] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
[ 1.415557] system 00:02: [io 0x4000-0x40fe] has been reserved
[ 1.421482] system 00:02: [io 0x4210-0x4217] has been reserved
[ 1.427412] system 00:02: [io 0x0b00-0x0b1f] could not be reserved
[ 1.433686] system 00:02: [io 0x0238-0x023f] has been reserved
[ 1.439615] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 1.446852] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.453478] system 00:0d: [mem 0x000cd400-0x000cffff] has been reserved
[ 1.460102] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 1.467069] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 1.474038] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[ 1.481014] system 00:0d: [mem 0x7dee0000-0x7defffff] could not be reserved
[ 1.487984] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
[ 1.494604] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.501572] system 00:0d: [mem 0x00100000-0x7dedffff] could not be reserved
[ 1.508542] system 00:0d: [mem 0x7dff0000-0x7ffeffff] could not be reserved
[ 1.515510] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.522476] system 00:0d: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 1.529445] system 00:0d: [mem 0xfff80000-0xfffeffff] has been reserved
[ 1.536141] initcall pnp_system_init+0x0/0xf returned 0 after 202260 usecs
[ 1.543033] calling chr_dev_init+0x0/0xb0 @ 1
[ 1.554552] initcall chr_dev_init+0x0/0xb0 returned 0 after 6894 usecs
[ 1.561142] calling firmware_class_init+0x0/0x14 @ 1
[ 1.566352] initcall firmware_class_init+0x0/0x14 returned 0 after 79 usecs
[ 1.573333] calling ieee1394_init+0x0/0x208 @ 1
[ 1.578505] initcall ieee1394_init+0x0/0x208 returned 0 after 529 usecs
[ 1.585129] calling cpufreq_gov_performance_init+0x0/0xf @ 1
[ 1.590906] initcall cpufreq_gov_performance_init+0x0/0xf returned 0 after 22 usecs
[ 1.598568] calling init_acpi_pm_clocksource+0x0/0x1a7 @ 1
[ 1.638698] initcall init_acpi_pm_clocksource+0x0/0x1a7 returned 0 after 33736 usecs
[ 1.646443] calling pcibios_assign_resources+0x0/0x81 @ 1
[ 1.651998] pci 0000:00:14.0: BAR 1: assigned [mem 0x80000000-0x800003ff]
[ 1.658796] pci 0000:00:14.0: BAR 1: set to [mem 0x80000000-0x800003ff] (PCI address [0x80000000-0x800003ff]
[ 299.177004] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 299.177004] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 299.177004] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff]
[ 299.177004] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
[ 299.177004] pci 0000:02:0f.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref]
[ 299.177004] pci 0000:00:14.4: PCI bridge to [bus 02-02]
[ 299.177004] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
[ 299.177004] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 299.177004] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 299.177004] initcall pcibios_assign_resources+0x0/0x81 returned 0 after 290550845 usecs
[ 299.177004] calling sysctl_core_init+0x0/0x2d @ 1
[ 299.177004] initcall sysctl_core_init+0x0/0x2d returned 0 after 0 usecs
[ 299.177004] calling inet_init+0x0/0x1f6 @ 1
[ 299.177004] NET: Registered protocol family 2
[ 299.177004] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 299.177004] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 299.177004] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[ 299.177004] TCP: Hash tables configured (established 131072 bind 65536)
[ 299.177004] TCP reno registered
[ 299.177004] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 299.177004] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 299.177004] initcall inet_init+0x0/0x1f6 returned 0 after 0 usecs
[ 299.177004] calling af_unix_init+0x0/0x47 @ 1
[ 299.177004] NET: Registered protocol family 1
[ 299.177004] initcall af_unix_init+0x0/0x47 returned 0 after 0 usecs
[ 299.177004] calling pci_apply_final_quirks+0x0/0x11e @ 1
[ 299.177004] pci 0000:00:00.0: pci_apply_final_quirks
[ 299.177004] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x21
[ 299.177004] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x5dd
[ 299.177004] pci 0000:00:00.0: calling pci_fixup_video+0x0/0x9c
[ 299.177004] pci 0000:00:01.0: pci_apply_final_quirks
[ 299.177004] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x21
[ 299.177004] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x5dd
[ 299.177004] pci 0000:00:01.0: calling pci_fixup_video+0x0/0x9c
[ 299.177004] pci 0000:00:12.0: pci_apply_final_quirks
[ 299.177004] pci 0000:00:12.0: calling quirk_cardbus_legacy+0x0/0x21
[ 299.177004] pci 0000:00:12.0: calling quirk_usb_early_handoff+0x0/0x5dd
[ 299.177004] pci 0000:00:12.0: calling pci_fixup_video+0x0/0x9c
[ 299.177004] pci 0000:00:13.0: pci_apply_final_quirks
[ 299.177004] pci 0000:00:13.0: calling quirk_cardbus_legacy+0x0/0x21
[ 299.177004] pci 0000:00:13.0: calling quirk_usb_early_handoff+0x0/0x5dd
=stalled=[ 0.000000] Linux version 2.6.35.4-git+ (byte@proxima) (gcc version 4.3.1 (Gentoo 4.3.1 p1.0) ) #git+ SMP PREEMPT 2010-08-25T23:29:08+0100
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007dee0000 (usable)
[ 0.000000] BIOS-e820: 000000007dee0000 - 000000007dee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007dee3000 - 000000007def0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007def0000 - 000000007df00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7dee0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 007DF00000 mask FFFFF00000 uncachable
[ 0.000000] 2 base 007E000000 mask FFFE000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01000000
[ 0.000000] found SMP MP-table at [c00f5140] f5140
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037a00000 page 2M
[ 0.000000] 0037a00000 - 0037bfe000 page 4k
[ 0.000000] kernel direct mapping tables up to 37bfe000 @ 7000-c000
[ 0.000000] ACPI: RSDP 000f6b00 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 7dee3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 7dee3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 7dee30c0 049B3 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 7dee0000 00040
[ 0.000000] ACPI: SSDT 7dee7b40 00248 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 7dee7dc0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 7dee7e00 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 7dee7a80 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1122MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037bfe
[ 0.000000] HighMem 0x00037bfe -> 0x0007dee0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007dee0
[ 0.000000] On node 0 totalpages: 515710
[ 0.000000] free_area_init_node: node 0, pgdat c06ca980, node_mem_map c1001020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3966 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2246 pages used for memmap
[ 0.000000] HighMem zone: 285212 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [3000 - 37ff]
[ 0.000000] Allocating PCI resources starting at 7df00000 (gap: 7df00000:62100000)
[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @c2000000 s30400 r0 d22848 u1048576
[ 0.000000] pcpu-alloc: s30400 r0 d22848 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511680
[ 0.000000] Kernel command line: root=/dev/sda1 ro panic=10 init=/startup sysrq_always_enabled console=ttyS0,115200 vga=0xf07 initcall_debug=1 tsc=reliable pci=nocrs
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Subtract (44 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0000200000 - 0000c781e4] TEXT DATA BSS
[ 0.000000] #3 [0000c79000 - 0000c810fe] BRK
[ 0.000000] #4 [00000f5150 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000f5140 - 00000f5150] MP-table mpf
[ 0.000000] #6 [000009f800 - 00000f0f00] BIOS reserved
[ 0.000000] #7 [00000f1054 - 00000f5140] BIOS reserved
[ 0.000000] #8 [00000f0f00 - 00000f1054] MP-table mpc
[ 0.000000] #9 [0000002000 - 0000003000] TRAMPOLINE
[ 0.000000] #10 [0000007000 - 0000008000] PGTABLE
[ 0.000000] #11 [0001000000 - 0001001000] BOOTMEM
[ 0.000000] #12 [0001001000 - 0001fc1000] BOOTMEM
[ 0.000000] #13 [0001fc1000 - 0001fc1004] BOOTMEM
[ 0.000000] #14 [0001fc1040 - 0001fc1280] BOOTMEM
[ 0.000000] #15 [0001fc1280 - 0001fc1328] BOOTMEM
[ 0.000000] #16 [0001fc1340 - 0001fca340] BOOTMEM
[ 0.000000] #17 [0001fca340 - 0001fca414] BOOTMEM
[ 0.000000] #18 [0001fca440 - 0001fdc440] BOOTMEM
[ 0.000000] #19 [0001fdc440 - 0001fdc46d] BOOTMEM
[ 0.000000] #20 [0001fdc480 - 0001fdc4af] BOOTMEM
[ 0.000000] #21 [0001fdc4c0 - 0001fdc628] BOOTMEM
[ 0.000000] #22 [0001fdc640 - 0001fdc680] BOOTMEM
[ 0.000000] #23 [0001fdc680 - 0001fdc6c0] BOOTMEM
[ 0.000000] #24 [0001fdc6c0 - 0001fdc700] BOOTMEM
[ 0.000000] #25 [0001fdc700 - 0001fdc740] BOOTMEM
[ 0.000000] #26 [0001fdc740 - 0001fdc780] BOOTMEM
[ 0.000000] #27 [0001fdc780 - 0001fdc7c0] BOOTMEM
[ 0.000000] #28 [0001fdc7c0 - 0001fdc800] BOOTMEM
[ 0.000000] #29 [0001fdc800 - 0001fdc840] BOOTMEM
[ 0.000000] #30 [0001fdc840 - 0001fdc880] BOOTMEM
[ 0.000000] #31 [0001fdc880 - 0001fdc905] BOOTMEM
[ 0.000000] #32 [0001fdc940 - 0001fdc9c5] BOOTMEM
[ 0.000000] #33 [0002000000 - 000200d000] BOOTMEM
[ 0.000000] #34 [0002100000 - 000210d000] BOOTMEM
[ 0.000000] #35 [0001fdea00 - 0001fdea04] BOOTMEM
[ 0.000000] #36 [0001fdea40 - 0001fdea44] BOOTMEM
[ 0.000000] #37 [0001fdea80 - 0001fdea88] BOOTMEM
[ 0.000000] #38 [0001fdeac0 - 0001fdeac8] BOOTMEM
[ 0.000000] #39 [0001fdeb00 - 0001fdeba0] BOOTMEM
[ 0.000000] #40 [0001fdebc0 - 0001fdec08] BOOTMEM
[ 0.000000] #41 [0001fdec40 - 0001fe2c40] BOOTMEM
[ 0.000000] #42 [000200d000 - 000208d000] BOOTMEM
[ 0.000000] #43 [000208d000 - 00020cd000] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0007dee0)
[ 0.000000] Memory: 2034932k/2063232k available (3157k kernel code, 27908k reserved, 1766k data, 376k init, 1149832k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc06cf000 - 0xc072d000 ( 376 kB)
[ 0.000000] .data : 0xc05155ca - 0xc06ceff4 (1766 kB)
[ 0.000000] .text : 0xc0200000 - 0xc05155ca (3157 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:320
[ 0.000000] Console: colour VGA+ 80x60
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3567 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2305.745 MHz processor.
[ 0.003003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4611.49 BogoMIPS (lpj=2305745)
[ 0.005004] pid_max: default: 32768 minimum: 301
[ 0.006071] Security Framework initialized
[ 0.007065] TCP/UDP port access control v1.1 LSM initialised
[ 0.008045] Mount-cache hash table entries: 512
[ 0.010052] CPU: Physical Processor ID: 0
[ 0.011003] CPU: Processor Core ID: 0
[ 0.012004] mce: CPU supports 5 MCE banks
[ 0.013011] using C1E aware idle routine
[ 0.014010] Performance Events: AMD PMU driver.
[ 0.016010] ... version: 0
[ 0.017003] ... bit width: 48
[ 0.018003] ... generic registers: 4
[ 0.019003] ... value mask: 0000ffffffffffff
[ 0.020003] ... max period: 00007fffffffffff
[ 0.021003] ... fixed-purpose events: 0
[ 0.022004] ... event mask: 000000000000000f
[ 0.024109] Freeing SMP alternatives: 16k freed
[ 0.025017] ACPI: Core revision 20100428
[ 0.035210] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.037335] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.048354] CPU0: AMD Athlon(tm) Dual Core Processor 4450e stepping 02
[ 0.051999] calling migration_init+0x0/0x47 @ 1
[ 0.052006] initcall migration_init+0x0/0x47 returned 0 after 0 usecs
[ 0.053003] calling spawn_ksoftirqd+0x0/0x43 @ 1
[ 0.055043] initcall spawn_ksoftirqd+0x0/0x43 returned 0 after 976 usecs
[ 0.056004] calling init_call_single_data+0x0/0x80 @ 1
[ 0.057004] initcall init_call_single_data+0x0/0x80 returned 0 after 0 usecs
[ 0.058003] calling cpu_stop_init+0x0/0x9b @ 1
[ 0.060017] initcall cpu_stop_init+0x0/0x9b returned 0 after 976 usecs
[ 0.061003] calling spawn_softlockup_task+0x0/0x5f @ 1
[ 0.063016] initcall spawn_softlockup_task+0x0/0x5f returned 0 after 976 usecs
[ 0.066008] lockdep: fixing up alternatives.
[ 0.067104] Booting Node 0, Processors #1 Ok.
[ 0.003999] Initializing CPU#1
[ 0.140099] Brought up 2 CPUs
[ 0.141003] Total of 2 processors activated (9221.86 BogoMIPS).
[ 0.144065] calling init_mmap_min_addr+0x0/0x11 @ 1
[ 0.145005] initcall init_mmap_min_addr+0x0/0x11 returned 0 after 0 usecs
[ 0.146004] calling init_cpufreq_transition_notifier_list+0x0/0x18 @ 1
[ 0.147006] initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 after 0 usecs
[ 0.148026] calling net_ns_init+0x0/0x162 @ 1
[ 0.149027] initcall net_ns_init+0x0/0x162 returned 0 after 0 usecs
[ 0.150004] calling cpufreq_tsc+0x0/0x25 @ 1
[ 0.151003] initcall cpufreq_tsc+0x0/0x25 returned 0 after 0 usecs
[ 0.152005] calling pci_reboot_init+0x0/0x11 @ 1
[ 0.153006] initcall pci_reboot_init+0x0/0x11 returned 0 after 0 usecs
[ 0.154003] calling reboot_init+0x0/0x11 @ 1
[ 0.155011] initcall reboot_init+0x0/0x11 returned 0 after 0 usecs
[ 0.157003] calling init_lapic_sysfs+0x0/0x28 @ 1
[ 0.158038] initcall init_lapic_sysfs+0x0/0x28 returned 0 after 0 usecs
[ 0.159018] calling init_smp_flush+0x0/0x2a @ 1
[ 0.160004] initcall init_smp_flush+0x0/0x2a returned 0 after 0 usecs
[ 0.161003] calling sysctl_init+0x0/0x2d @ 1
[ 0.162005] initcall sysctl_init+0x0/0x2d returned 0 after 0 usecs
[ 0.163004] calling ksysfs_init+0x0/0x74 @ 1
[ 0.164010] initcall ksysfs_init+0x0/0x74 returned 0 after 0 usecs
[ 0.165003] calling async_init+0x0/0x50 @ 1
[ 0.166017] initcall async_init+0x0/0x50 returned 0 after 0 usecs
[ 0.172006] calling init_jiffies_clocksource+0x0/0xf @ 1
[ 0.177006] initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 usecs
[ 0.184004] calling pm_init+0x0/0x2d @ 1
[ 0.188015] initcall pm_init+0x0/0x2d returned 0 after 0 usecs
[ 0.194004] calling init_hw_breakpoint+0x0/0xaf @ 1
[ 0.199005] initcall init_hw_breakpoint+0x0/0xaf returned 0 after 0 usecs
[ 0.206003] calling init_zero_pfn+0x0/0x14 @ 1
[ 0.210003] initcall init_zero_pfn+0x0/0x14 returned 0 after 0 usecs
[ 0.217003] calling filelock_init+0x0/0x27 @ 1
[ 0.221027] initcall filelock_init+0x0/0x27 returned 0 after 0 usecs
[ 0.228004] calling init_script_binfmt+0x0/0x11 @ 1
[ 0.233023] initcall init_script_binfmt+0x0/0x11 returned 0 after 0 usecs
[ 0.240003] calling init_elf_binfmt+0x0/0x11 @ 1
[ 0.244004] initcall init_elf_binfmt+0x0/0x11 returned 0 after 0 usecs
[ 0.251004] calling random32_init+0x0/0xa8 @ 1
[ 0.255004] initcall random32_init+0x0/0xa8 returned 0 after 0 usecs
[ 0.262004] calling cpufreq_core_init+0x0/0x7b @ 1
[ 0.267007] initcall cpufreq_core_init+0x0/0x7b returned 0 after 0 usecs
[ 0.273003] calling cpuidle_init+0x0/0x32 @ 1
[ 0.278008] initcall cpuidle_init+0x0/0x32 returned 0 after 0 usecs
[ 0.284004] calling sock_init+0x0/0x51 @ 1
[ 0.288146] initcall sock_init+0x0/0x51 returned 0 after 0 usecs
[ 0.294004] calling netlink_proto_init+0x0/0x108 @ 1
[ 0.299043] NET: Registered protocol family 16
[ 0.304056] initcall netlink_proto_init+0x0/0x108 returned 0 after 4882 usecs
[ 0.311003] calling bdi_class_init+0x0/0x2f @ 1
[ 0.316033] initcall bdi_class_init+0x0/0x2f returned 0 after 0 usecs
[ 0.322009] calling kobject_uevent_init+0x0/0x1e @ 1
[ 0.327028] initcall kobject_uevent_init+0x0/0x1e returned 0 after 0 usecs
[ 0.334004] calling pcibus_class_init+0x0/0x14 @ 1
[ 0.339062] initcall pcibus_class_init+0x0/0x14 returned 0 after 0 usecs
[ 0.346006] calling pci_driver_init+0x0/0xf @ 1
[ 0.350040] initcall pci_driver_init+0x0/0xf returned 0 after 976 usecs
[ 0.357010] calling tty_class_init+0x0/0x2f @ 1
[ 0.362031] initcall tty_class_init+0x0/0x2f returned 0 after 0 usecs
[ 0.368005] calling vtconsole_class_init+0x0/0xa1 @ 1
[ 0.374063] initcall vtconsole_class_init+0x0/0xa1 returned 0 after 976 usecs
[ 0.381008] calling i2c_init+0x0/0x57 @ 1
[ 0.385061] initcall i2c_init+0x0/0x57 returned 0 after 0 usecs
[ 0.391006] calling amd_postcore_init+0x0/0xa72 @ 1
[ 0.396006] node 0 link 0: io port [d000, ffff]
[ 0.396010] TOM: 0000000080000000 aka 2048M
[ 0.400003] node 0 link 0: mmio [a0000, bffff]
[ 0.400007] node 0 link 0: mmio [fc000000, fe02ffff]
[ 0.400011] node 0 link 0: mmio [80000000, f9ffffff]
[ 0.400014] node 0 link 0: mmio [fa000000, fbffffff]
[ 0.400018] node 0 link 0: mmio [e0000000, efffffff]
[ 0.400022] bus: [00, 02] on node 0 link 0
[ 0.400025] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.400027] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.400030] bus: 00 index 2 [mem 0xfa000000-0xfcffffffff]
[ 0.400033] bus: 00 index 3 [mem 0x80000000-0xf9ffffff]
[ 0.400038] initcall amd_postcore_init+0x0/0xa72 returned 0 after 3906 usecs
[ 0.407004] calling arch_kdebugfs_init+0x0/0x11 @ 1
[ 0.412004] initcall arch_kdebugfs_init+0x0/0x11 returned 0 after 0 usecs
[ 0.419003] calling init_pit_clocksource+0x0/0x98 @ 1
[ 0.424004] initcall init_pit_clocksource+0x0/0x98 returned 0 after 0 usecs
[ 0.431004] calling mtrr_if_init+0x0/0x44 @ 1
[ 0.436007] initcall mtrr_if_init+0x0/0x44 returned 0 after 0 usecs
[ 0.442004] calling ffh_cstate_init+0x0/0x27 @ 1
[ 0.447004] initcall ffh_cstate_init+0x0/0x27 returned -1 after 0 usecs
[ 0.453004] initcall ffh_cstate_init+0x0/0x27 returned with error code -1
[ 0.460004] calling acpi_pci_init+0x0/0x51 @ 1
[ 0.465018] ACPI: bus type pci registered
[ 0.469004] initcall acpi_pci_init+0x0/0x51 returned 0 after 3906 usecs
[ 0.475003] calling dmi_id_init+0x0/0x26e @ 1
[ 0.480081] initcall dmi_id_init+0x0/0x26e returned 0 after 0 usecs
[ 0.486011] calling pci_arch_init+0x0/0x62 @ 1
[ 0.491038] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.500004] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.507002] PCI: Using MMCONFIG for extended config space
[ 0.512002] PCI: Using configuration type 1 for base access
[ 0.518015] initcall pci_arch_init+0x0/0x62 returned 0 after 26367 usecs
[ 0.524003] calling topology_init+0x0/0x46 @ 1
[ 0.529046] initcall topology_init+0x0/0x46 returned 0 after 0 usecs
[ 0.535021] calling mtrr_init_finialize+0x0/0x35 @ 1
[ 0.541004] initcall mtrr_init_finialize+0x0/0x35 returned 0 after 0 usecs
[ 0.547004] calling param_sysfs_init+0x0/0x18e @ 1
[ 0.562114] initcall param_sysfs_init+0x0/0x18e returned 0 after 9765 usecs
[ 0.569045] calling pm_sysrq_init+0x0/0x16 @ 1
[ 0.574018] initcall pm_sysrq_init+0x0/0x16 returned 0 after 0 usecs
[ 0.580004] calling init_slow_work+0x0/0x32 @ 1
[ 0.585004] initcall init_slow_work+0x0/0x32 returned 0 after 0 usecs
[ 0.591003] calling default_bdi_init+0x0/0xa4 @ 1
[ 0.596091] initcall default_bdi_init+0x0/0xa4 returned 0 after 0 usecs
[ 0.603044] calling init_bio+0x0/0xb9 @ 1
[ 0.607092] bio: create slab <bio-0> at 0
[ 0.611012] initcall init_bio+0x0/0xb9 returned 0 after 3906 usecs
[ 0.617003] calling fsnotify_init+0x0/0x19 @ 1
[ 0.622008] initcall fsnotify_init+0x0/0x19 returned 0 after 0 usecs
[ 0.628003] calling fsnotify_notification_init+0x0/0xe7 @ 1
[ 0.634023] initcall fsnotify_notification_init+0x0/0xe7 returned 0 after 0 usecs
[ 0.641004] calling cryptomgr_init+0x0/0xf @ 1
[ 0.646004] initcall cryptomgr_init+0x0/0xf returned 0 after 0 usecs
[ 0.652003] calling blk_settings_init+0x0/0x1d @ 1
[ 0.657004] initcall blk_settings_init+0x0/0x1d returned 0 after 0 usecs
[ 0.664003] calling blk_ioc_init+0x0/0x24 @ 1
[ 0.668013] initcall blk_ioc_init+0x0/0x24 returned 0 after 0 usecs
[ 0.675003] calling blk_softirq_init+0x0/0x51 @ 1
[ 0.679004] initcall blk_softirq_init+0x0/0x51 returned 0 after 0 usecs
[ 0.686003] calling blk_iopoll_setup+0x0/0x51 @ 1
[ 0.691004] initcall blk_iopoll_setup+0x0/0x51 returned 0 after 0 usecs
[ 0.697003] calling genhd_device_init+0x0/0x50 @ 1
[ 0.702054] initcall genhd_device_init+0x0/0x50 returned 0 after 0 usecs
[ 0.709043] calling pci_slot_init+0x0/0x3b @ 1
[ 0.714007] initcall pci_slot_init+0x0/0x3b returned 0 after 0 usecs
[ 0.720004] calling acpi_init+0x0/0x2b6 @ 1
[ 0.728497] ACPI: EC: Look up EC in DSDT
[ 0.732519] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.742159] ACPI: Interpreter enabled
[ 0.743002] ACPI: (supports S0 S5)
[ 0.745290] ACPI: Using IOAPIC for interrupt routing
[ 0.760150] initcall acpi_init+0x0/0x2b6 returned 0 after 35156 usecs
[ 0.761048] calling dock_init+0x0/0x81 @ 1
[ 0.762323] ACPI: No dock devices found.
[ 0.763004] initcall dock_init+0x0/0x81 returned 0 after 976 usecs
[ 0.764004] calling acpi_pci_root_init+0x0/0x2a @ 1
[ 0.765007] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.766234] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.768134] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.768138] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.768141] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.768144] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.768147] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[ 0.768375] pci 0000:00:12.0: reg 10: [io 0xff00-0xff07]
[ 0.768385] pci 0000:00:12.0: reg 14: [io 0xfe00-0xfe03]
[ 0.768394] pci 0000:00:12.0: reg 18: [io 0xfd00-0xfd07]
[ 0.768403] pci 0000:00:12.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.768413] pci 0000:00:12.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.768423] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.768499] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.768574] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.768650] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff]
[ 0.768725] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 0.768801] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.768892] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff]
[ 0.768965] pci 0000:00:13.5: supports D1 D2
[ 0.768967] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.768974] pci 0000:00:13.5: PME# disabled
[ 0.769033] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f]
[ 0.769042] pci 0000:00:14.0: reg 14: [mem 0xfed00000-0xfed003ff]
[ 0.769151] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.769160] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.769169] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.769178] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.769187] pci 0000:00:14.1: reg 20: [io 0xf900-0xf90f]
[ 0.769281] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.769347] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.769353] pci 0000:00:14.2: PME# disabled
[ 0.769659] PCI: peer root bus 00 res updated from pci conf
[ 0.769725] pci 0000:01:05.0: reg 10: [mem 0xfa000000-0xfbffffff 64bit pref]
[ 0.769735] pci 0000:01:05.0: reg 18: [mem 0xfdff0000-0xfdffffff 64bit]
[ 0.769741] pci 0000:01:05.0: reg 20: [io 0xee00-0xeeff]
[ 0.769747] pci 0000:01:05.0: reg 24: [mem 0xfde00000-0xfdefffff]
[ 0.769769] pci 0000:01:05.0: supports D1 D2
[ 0.769802] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.770006] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.770011] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff]
[ 0.770017] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
[ 0.770112] pci 0000:02:07.0: reg 10: [mem 0xfdda0000-0xfddbffff 64bit]
[ 0.770140] pci 0000:02:07.0: reg 20: [io 0xdf00-0xdf3f]
[ 0.770201] pci 0000:02:07.0: PME# supported from D0 D3hot D3cold
[ 0.770207] pci 0000:02:07.0: PME# disabled
[ 0.770286] pci 0000:02:07.1: reg 10: [mem 0xfddc0000-0xfdddffff 64bit]
[ 0.770314] pci 0000:02:07.1: reg 20: [io 0xde00-0xde3f]
[ 0.770374] pci 0000:02:07.1: PME# supported from D0 D3hot D3cold
[ 0.770380] pci 0000:02:07.1: PME# disabled
[ 0.770467] pci 0000:02:0f.0: reg 10: [io 0xdc00-0xdcff]
[ 0.770477] pci 0000:02:0f.0: reg 14: [mem 0xfddff000-0xfddff0ff]
[ 0.770519] pci 0000:02:0f.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.770551] pci 0000:02:0f.0: supports D1 D2
[ 0.770553] pci 0000:02:0f.0: PME# supported from D1 D2 D3hot D3cold
[ 0.770560] pci 0000:02:0f.0: PME# disabled
[ 0.770606] pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.771006] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
[ 0.771013] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.771019] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 0.771023] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.771026] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.771030] pci 0000:00:14.4: bridge window [mem 0xfa000000-0xfcffffffff] (subtractive decode)
[ 0.771033] pci 0000:00:14.4: bridge window [mem 0x80000000-0xf9ffffff] (subtractive decode)
[ 0.771048] pci_bus 0000:00: on NUMA node 0
[ 0.771055] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.772440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.772753] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.815099] initcall acpi_pci_root_init+0x0/0x2a returned 0 after 48828 usecs
[ 0.816011] calling acpi_pci_link_init+0x0/0x3f @ 1
[ 0.817181] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.821350] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.825347] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.829349] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.834152] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.839023] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.843349] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.847349] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.851272] initcall acpi_pci_link_init+0x0/0x3f returned 0 after 33203 usecs
[ 0.852022] calling pnp_init+0x0/0xf @ 1
[ 0.853038] initcall pnp_init+0x0/0xf returned 0 after 0 usecs
[ 0.854009] calling misc_init+0x0/0x9b @ 1
[ 0.855055] initcall misc_init+0x0/0x9b returned 0 after 0 usecs
[ 0.856006] calling vga_arb_device_init+0x0/0x68 @ 1
[ 0.858092] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.859012] vgaarb: loaded
[ 0.860003] initcall vga_arb_device_init+0x0/0x68 returned 0 after 2929 usecs
[ 0.861003] calling init_scsi+0x0/0x74 @ 1
[ 0.862143] SCSI subsystem initialized
[ 0.863009] initcall init_scsi+0x0/0x74 returned 0 after 976 usecs
[ 0.864003] calling ata_init+0x0/0x2ab @ 1
[ 0.865027] libata version 3.00 loaded.
[ 0.865027] initcall ata_init+0x0/0x2ab returned 0 after 0 usecs
[ 0.871008] calling usb_init+0x0/0xfa @ 1
[ 0.876055] usbcore: registered new interface driver usbfs
[ 0.881064] usbcore: registered new interface driver hub
[ 0.887050] usbcore: registered new device driver usb
[ 0.888005] initcall usb_init+0x0/0xfa returned 0 after 12695 usecs
[ 0.889003] calling serio_init+0x0/0x73 @ 1
[ 0.890048] initcall serio_init+0x0/0x73 returned 0 after 0 usecs
[ 0.896009] calling input_init+0x0/0x10f @ 1
[ 0.901039] initcall input_init+0x0/0x10f returned 0 after 0 usecs
[ 0.907010] calling power_supply_class_init+0x0/0x39 @ 1
[ 0.913028] initcall power_supply_class_init+0x0/0x39 returned 0 after 0 usecs
[ 0.920008] calling hwmon_init+0x0/0xf3 @ 1
[ 0.924032] initcall hwmon_init+0x0/0xf3 returned 0 after 0 usecs
[ 0.930008] calling thermal_init+0x0/0x46 @ 1
[ 0.935031] initcall thermal_init+0x0/0x46 returned 0 after 0 usecs
[ 0.941005] calling md_init+0x0/0xb7 @ 1
[ 0.945014] initcall md_init+0x0/0xb7 returned 0 after 0 usecs
[ 0.951004] calling init_soundcore+0x0/0x83 @ 1
[ 0.956029] initcall init_soundcore+0x0/0x83 returned 0 after 0 usecs
[ 0.962010] calling alsa_sound_init+0x0/0x88 @ 1
[ 0.967075] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 0.973004] initcall alsa_sound_init+0x0/0x88 returned 0 after 5859 usecs
[ 0.980004] calling pci_subsys_init+0x0/0x44 @ 1
[ 0.985002] PCI: Using ACPI for IRQ routing
[ 0.989004] PCI: pci_cache_line_size set to 64 bytes
[ 0.989156] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.989160] reserve RAM buffer: 000000007dee0000 - 000000007fffffff initcall pci_subsys_init+0x0/0x44 returned 0 after 3906 usecs
[ 0.989170] calling proto_init+0x0/0xf @ 1
[ 0.993009] initcall proto_init+0x0/0xf returned 0 after 0 usecs
[ 0.999004] calling net_dev_init+0x0/0x1d5 @ 1
[ 1.004248] initcall net_dev_init+0x0/0x1d5 returned 0 after 0 usecs
[ 1.011007] calling neigh_init+0x0/0x66 @ 1
[ 1.015005] initcall neigh_init+0x0/0x66 returned 0 after 0 usecs
[ 1.021004] calling fib_rules_init+0x0/0x99 @ 1
[ 1.026006] initcall fib_rules_init+0x0/0x99 returned 0 after 0 usecs
[ 1.032003] calling pktsched_init+0x0/0xce @ 1
[ 1.037025] initcall pktsched_init+0x0/0xce returned 0 after 0 usecs
[ 1.043003] calling tc_filter_init+0x0/0x43 @ 1
[ 1.048003] initcall tc_filter_init+0x0/0x43 returned 0 after 0 usecs
[ 1.054011] calling tc_action_init+0x0/0x43 @ 1
[ 1.059003] initcall tc_action_init+0x0/0x43 returned 0 after 0 usecs
[ 1.065003] calling genl_init+0x0/0x77 @ 1
[ 1.069052] initcall genl_init+0x0/0x77 returned 0 after 0 usecs
[ 1.075004] calling atm_init+0x0/0xbc @ 1
[ 1.079004] NET: Registered protocol family 8
[ 1.084002] NET: Registered protocol family 20
[ 1.088031] initcall atm_init+0x0/0xbc returned 0 after 8789 usecs
[ 1.095014] calling sysctl_init+0x0/0x3b @ 1
[ 1.099005] initcall sysctl_init+0x0/0x3b returned 0 after 0 usecs
[ 1.105004] calling print_ICs+0x0/0x4e1 @ 1
[ 1.109004] initcall print_ICs+0x0/0x4e1 returned 0 after 0 usecs
[ 1.115003] calling hpet_late_init+0x0/0x22e @ 1
[ 1.120010] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.125760] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 1.133003] initcall hpet_late_init+0x0/0x22e returned 0 after 12695 usecs
[ 1.140005] calling init_k8_nbs+0x0/0x21 @ 1
[ 1.145039] initcall init_k8_nbs+0x0/0x21 returned 0 after 0 usecs
[ 1.151005] calling clocksource_done_booting+0x0/0x53 @ 1
[ 1.156006] Switching to clocksource hpet
[ 1.160092] initcall clocksource_done_booting+0x0/0x53 returned 0 after 3929 usecs
[ 1.167607] calling init_pipe_fs+0x0/0x3d @ 1
[ 1.172153] initcall init_pipe_fs+0x0/0x3d returned 0 after 84 usecs
[ 1.178512] calling eventpoll_init+0x0/0xb9 @ 1
[ 1.183193] initcall eventpoll_init+0x0/0xb9 returned 0 after 50 usecs
[ 1.189727] calling anon_inode_init+0x0/0xf5 @ 1
[ 1.194507] initcall anon_inode_init+0x0/0xf5 returned 0 after 63 usecs
[ 1.201132] calling blk_scsi_ioctl_init+0x0/0x294 @ 1
[ 1.206282] initcall blk_scsi_ioctl_init+0x0/0x294 returned 0 after 1 usecs
[ 1.213248] calling acpi_event_init+0x0/0x46 @ 1
[ 1.217974] initcall acpi_event_init+0x0/0x46 returned 0 after 9 usecs
[ 1.224506] calling pnpacpi_init+0x0/0x7b @ 1
[ 1.228960] pnp: PnP ACPI init
[ 1.232055] ACPI: bus type pnp registered
[ 1.237220] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:02:0f.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 1.254826] pnp: PnP ACPI: found 14 devices
[ 1.259032] ACPI: ACPI bus type pnp unregistered
[ 1.263666] initcall pnpacpi_init+0x0/0x7b returned 0 after 33890 usecs
[ 1.270284] calling pnp_system_init+0x0/0xf @ 1
[ 1.274936] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 1.280868] system 00:01: [io 0x0220-0x0225] has been reserved
[ 1.286796] system 00:01: [io 0x0290-0x0294] has been reserved
[ 1.292729] system 00:02: [io 0x4100-0x411f] has been reserved
[ 1.298661] system 00:02: [io 0x0228-0x022f] has been reserved
[ 1.304587] system 00:02: [io 0x040b] has been reserved
[ 1.309909] system 00:02: [io 0x04d6] has been reserved
[ 1.315230] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 1.321159] system 00:02: [io 0x0c14] has been reserved
[ 1.326481] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 1.332410] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
[ 1.338337] system 00:02: [io 0x0c6f] has been reserved
[ 1.343661] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 1.349587] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 1.355514] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
[ 1.361442] system 00:02: [io 0x4000-0x40fe] has been reserved
[ 1.367371] system 00:02: [io 0x4210-0x4217] has been reserved
[ 1.373298] system 00:02: [io 0x0b00-0x0b1f] could not be reserved
[ 1.379573] system 00:02: [io 0x0238-0x023f] has been reserved
[ 1.385502] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 1.392738] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.399368] system 00:0d: [mem 0x000cd400-0x000cffff] has been reserved
[ 1.405993] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 1.412959] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 1.419925] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[ 1.426893] system 00:0d: [mem 0x7dee0000-0x7defffff] could not be reserved
[ 1.433862] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
[ 1.440484] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.447450] system 00:0d: [mem 0x00100000-0x7dedffff] could not be reserved
[ 1.454419] system 00:0d: [mem 0x7dff0000-0x7ffeffff] could not be reserved
[ 1.461388] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.468356] system 00:0d: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 1.475323] system 00:0d: [mem 0xfff80000-0xfffeffff] has been reserved
[ 1.482028] initcall pnp_system_init+0x0/0xf returned 0 after 202260 usecs
[ 1.488914] calling chr_dev_init+0x0/0xb0 @ 1
[ 1.500397] initcall chr_dev_init+0x0/0xb0 returned 0 after 6860 usecs
[ 1.506991] calling firmware_class_init+0x0/0x14 @ 1
[ 1.512152] initcall firmware_class_init+0x0/0x14 returned 0 after 73 usecs
[ 1.519168] calling ieee1394_init+0x0/0x208 @ 1
[ 1.524366] initcall ieee1394_init+0x0/0x208 returned 0 after 549 usecs
[ 1.530992] calling cpufreq_gov_performance_init+0x0/0xf @ 1
[ 1.536772] initcall cpufreq_gov_performance_init+0x0/0xf returned 0 after 23 usecs
[ 1.544432] calling init_acpi_pm_clocksource+0x0/0x1a7 @ 1
[ 1.584559] initcall init_acpi_pm_clocksource+0x0/0x1a7 returned 0 after 33735 usecs
[ 1.592309] calling pcibios_assign_resources+0x0/0x81 @ 1
[ 1.597859] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.603097] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 1.609200] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff]
[ 1.615996] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
[ 1.623747] pci 0000:02:0f.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref]
[ 1.630978] pci 0000:00:14.4: PCI bridge to [bus 02-02]
[ 1.636214] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
[ 1.642319] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 1.649121] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 1.656368] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 1.656371] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 1.656374] pci_bus 0000:00: resource 6 [mem 0xfa000000-0xfcffffffff]
[ 1.656378] pci_bus 0000:00: resource 7 [mem 0x80000000-0xf9ffffff]
[ 1.656381] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 1.656384] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdffffff]
[ 1.656387] pci_bus 0000:01: resource 2 [mem 0xfa000000-0xfbffffff 64bit pref]
[ 1.656391] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 1.656394] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 1.656397] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
[ 1.656400] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 1.656403] pci_bus 0000:02: resource 5 [mem 0x000a0000-0x000bffff]
[ 1.656406] pci_bus 0000:02: resource 6 [mem 0xfa000000-0xfcffffffff]
[ 1.656409] pci_bus 0000:02: resource 7 [mem 0x80000000-0xf9ffffff]
[ 1.656415] initcall pcibios_assign_resources+0x0/0x81 returned 0 after 57237 usecs
[ 1.664078] calling sysctl_core_init+0x0/0x2d @ 1
[ 1.668897] initcall sysctl_core_init+0x0/0x2d returned 0 after 16 usecs
[ 1.675604] calling inet_init+0x0/0x1f6 @ 1
[ 1.679964] NET: Registered protocol family 2
[ 1.684497] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.692105] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.700213] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[ 1.711683] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.718339] TCP reno registered
[ 1.721501] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 1.727507] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 1.734118] initcall inet_init+0x0/0x1f6 returned 0 after 52958 usecs
[ 1.740571] calling af_unix_init+0x0/0x47 @ 1
[ 1.745042] NET: Registered protocol family 1
[ 1.749416] initcall af_unix_init+0x0/0x47 returned 0 after 4286 usecs
[ 1.755954] calling pci_apply_final_quirks+0x0/0xea @ 1
[ 1.826074] pci 0000:01:05.0: Boot video device
[ 1.826092] PCI: CLS 4 bytes, default 64
[ 1.826097] initcall pci_apply_final_quirks+0x0/0xea returned 0 after 63300 usecs
[ 1.833585] calling default_rootfs+0x0/0x65 @ 1
[ 1.838293] initcall default_rootfs+0x0/0x65 returned 0 after 75 usecs
[ 1.844832] calling pci_iommu_init+0x0/0xd @ 1
[ 1.849377] initcall pci_iommu_init+0x0/0xd returned 0 after 1 usecs
[ 1.855735] calling i8259A_init_sysfs+0x0/0x2b @ 1
[ 1.860790] initcall i8259A_init_sysfs+0x0/0x2b returned 0 after 162 usecs
[ 1.867669] calling sbf_init+0x0/0xdd @ 1
[ 1.871778] initcall sbf_init+0x0/0xdd returned 0 after 1 usecs
[ 1.877705] calling i8237A_init_sysfs+0x0/0x1d @ 1
[ 1.882730] initcall i8237A_init_sysfs+0x0/0x1d returned 0 after 133 usecs
[ 1.889619] calling add_rtc_cmos+0x0/0x9d @ 1
[ 1.894081] initcall add_rtc_cmos+0x0/0x9d returned 0 after 3 usecs
[ 1.900360] calling cache_sysfs_init+0x0/0x2c5 @ 1
[ 1.905864] initcall cache_sysfs_init+0x0/0x2c5 returned 0 after 600 usecs
[ 1.912753] calling mcheck_init_device+0x0/0x262 @ 1
[ 1.918179] initcall mcheck_init_device+0x0/0x262 returned 0 after 355 usecs
[ 1.925242] calling threshold_init_device+0x0/0x6f @ 1
[ 1.930492] initcall threshold_init_device+0x0/0x6f returned 0 after 14 usecs
[ 1.937634] calling thermal_throttle_init_device+0x0/0x5f @ 1
[ 1.943478] initcall thermal_throttle_init_device+0x0/0x5f returned 0 after 1 usecs
[ 1.951138] calling msr_init+0x0/0x11c @ 1
[ 1.955612] initcall msr_init+0x0/0x11c returned 0 after 270 usecs
[ 1.961807] calling cpuid_init+0x0/0x11c @ 1
[ 1.966447] initcall cpuid_init+0x0/0x11c returned 0 after 264 usecs
[ 1.972815] calling ioapic_init_sysfs+0x0/0x84 @ 1
[ 1.977842] initcall ioapic_init_sysfs+0x0/0x84 returned 0 after 135 usecs
[ 1.984733] calling add_pcspkr+0x0/0x24 @ 1
[ 1.989097] initcall add_pcspkr+0x0/0x24 returned 0 after 84 usecs
[ 1.995296] calling aes_init+0x0/0xf @ 1
[ 1.999529] initcall aes_init+0x0/0xf returned 0 after 206 usecs
[ 2.005559] calling init_sched_debug_procfs+0x0/0x27 @ 1
[ 2.010975] initcall init_sched_debug_procfs+0x0/0x27 returned 0 after 8 usecs
[ 2.018204] calling proc_schedstat_init+0x0/0x1c @ 1
[ 2.023269] initcall proc_schedstat_init+0x0/0x1c returned 0 after 3 usecs
[ 2.030155] calling proc_execdomains_init+0x0/0x1c @ 1
[ 2.035394] initcall proc_execdomains_init+0x0/0x1c returned 0 after 3 usecs
[ 2.042453] calling ioresources_init+0x0/0x31 @ 1
[ 2.047268] initcall ioresources_init+0x0/0x31 returned 0 after 5 usecs
[ 2.053894] calling uid_cache_init+0x0/0x78 @ 1
[ 2.058565] initcall uid_cache_init+0x0/0x78 returned 0 after 40 usecs
[ 2.065100] calling init_posix_timers+0x0/0x14c @ 1
[ 2.070092] initcall init_posix_timers+0x0/0x14c returned 0 after 14 usecs
[ 2.076975] calling init_posix_cpu_timers+0x0/0xb8 @ 1
[ 2.082211] initcall init_posix_cpu_timers+0x0/0xb8 returned 0 after 1 usecs
[ 2.089271] calling nsproxy_cache_init+0x0/0x27 @ 1
[ 2.094271] initcall nsproxy_cache_init+0x0/0x27 returned 0 after 23 usecs
[ 2.101154] calling timekeeping_init_device+0x0/0x1d @ 1
[ 2.106719] initcall timekeeping_init_device+0x0/0x1d returned 0 after 153 usecs
[ 2.114130] calling init_clocksource_sysfs+0x0/0x43 @ 1
[ 2.119599] initcall init_clocksource_sysfs+0x0/0x43 returned 0 after 135 usecs
[ 2.126925] calling init_timer_list_procfs+0x0/0x27 @ 1
[ 2.132262] initcall init_timer_list_procfs+0x0/0x27 returned 0 after 10 usecs
[ 2.139494] calling init_tstats_procfs+0x0/0x27 @ 1
[ 2.144475] initcall init_tstats_procfs+0x0/0x27 returned 0 after 3 usecs
[ 2.151273] calling lockdep_proc_init+0x0/0x4f @ 1
[ 2.156171] initcall lockdep_proc_init+0x0/0x4f returned 0 after 8 usecs
[ 2.162879] calling futex_init+0x0/0x70 @ 1
[ 2.167190] initcall futex_init+0x0/0x70 returned 0 after 28 usecs
[ 2.173384] calling proc_dma_init+0x0/0x1c @ 1
[ 2.177929] initcall proc_dma_init+0x0/0x1c returned 0 after 3 usecs
[ 2.184295] calling proc_modules_init+0x0/0x1c @ 1
[ 2.189187] initcall proc_modules_init+0x0/0x1c returned 0 after 3 usecs
[ 2.195900] calling kallsyms_init+0x0/0x1f @ 1
[ 2.200447] initcall kallsyms_init+0x0/0x1f returned 0 after 3 usecs
[ 2.206812] calling ikconfig_init+0x0/0x3a @ 1
[ 2.211355] initcall ikconfig_init+0x0/0x3a returned 0 after 3 usecs
[ 2.217721] calling hung_task_init+0x0/0x42 @ 1
[ 2.222397] initcall hung_task_init+0x0/0x42 returned 0 after 44 usecs
[ 2.228938] calling utsname_sysctl_init+0x0/0x11 @ 1
[ 2.234001] initcall utsname_sysctl_init+0x0/0x11 returned 0 after 3 usecs
[ 2.240885] calling init_lstats_procfs+0x0/0x1f @ 1
[ 2.245872] initcall init_lstats_procfs+0x0/0x1f returned 0 after 10 usecs
[ 2.252752] calling perf_event_sysfs_init+0x0/0x14 @ 1
[ 2.257993] initcall perf_event_sysfs_init+0x0/0x14 returned 0 after 6 usecs
[ 2.265048] calling init_per_zone_wmark_min+0x0/0x59 @ 1
[ 2.270558] initcall init_per_zone_wmark_min+0x0/0x59 returned 0 after 98 usecs
[ 2.277876] calling kswapd_init+0x0/0x13 @ 1
[ 2.282302] initcall kswapd_init+0x0/0x13 returned 0 after 54 usecs
[ 2.288585] calling setup_vmstat+0x0/0xa8 @ 1
[ 2.293063] initcall setup_vmstat+0x0/0xa8 returned 0 after 16 usecs
[ 2.299424] calling mm_sysfs_init+0x0/0x22 @ 1
[ 2.303970] initcall mm_sysfs_init+0x0/0x22 returned 0 after 4 usecs
[ 2.310335] calling proc_vmalloc_init+0x0/0x1f @ 1
[ 2.315227] initcall proc_vmalloc_init+0x0/0x1f returned 0 after 3 usecs
[ 2.321940] calling init_emergency_pool+0x0/0x57 @ 1
[ 2.327048] highmem bounce pool size: 64 pages
[ 2.331508] initcall init_emergency_pool+0x0/0x57 returned 0 after 4399 usecs
[ 2.338649] calling procswaps_init+0x0/0x1c @ 1
[ 2.343283] initcall procswaps_init+0x0/0x1c returned 0 after 3 usecs
[ 2.349733] calling hugetlb_init+0x0/0x2e2 @ 1
[ 2.354277] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.360649] initcall hugetlb_init+0x0/0x2e2 returned 0 after 6222 usecs
[ 2.367276] calling slab_proc_init+0x0/0x1f @ 1
[ 2.371907] initcall slab_proc_init+0x0/0x1f returned 0 after 3 usecs
[ 2.378361] calling cpucache_init+0x0/0x36 @ 1
[ 2.382907] initcall cpucache_init+0x0/0x36 returned 0 after 4 usecs
[ 2.389273] calling fasync_init+0x0/0x24 @ 1
[ 2.393657] initcall fasync_init+0x0/0x24 returned 0 after 16 usecs
[ 2.399930] calling proc_filesystems_init+0x0/0x1c @ 1
[ 2.405173] initcall proc_filesystems_init+0x0/0x1c returned 0 after 4 usecs
[ 2.412230] calling dnotify_init+0x0/0x6f @ 1
[ 2.416736] initcall dnotify_init+0x0/0x6f returned 0 after 50 usecs
[ 2.423098] calling inotify_setup+0x0/0x11 @ 1
[ 2.427641] initcall inotify_setup+0x0/0x11 returned 0 after 1 usecs
[ 2.434001] calling inotify_user_setup+0x0/0x65 @ 1
[ 2.439015] initcall inotify_user_setup+0x0/0x65 returned 0 after 28 usecs
[ 2.445899] calling aio_setup+0x0/0x8c @ 1
[ 2.450218] initcall aio_setup+0x0/0x8c returned 0 after 118 usecs
[ 2.456406] calling proc_locks_init+0x0/0x1c @ 1
[ 2.461125] initcall proc_locks_init+0x0/0x1c returned 0 after 4 usecs
[ 2.467662] calling init_mbcache+0x0/0x11 @ 1
[ 2.472122] initcall init_mbcache+0x0/0x11 returned 0 after 1 usecs
[ 2.478401] calling dquot_init+0x0/0xf6 @ 1
[ 2.482681] VFS: Disk quotas dquot_6.5.2
[ 2.486650] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.493188] initcall dquot_init+0x0/0xf6 returned 0 after 10259 usecs
[ 2.499635] calling init_v2_quota_format+0x0/0x1d @ 1
[ 2.504809] initcall init_v2_quota_format+0x0/0x1d returned 0 after 23 usecs
[ 2.511864] calling quota_init+0x0/0x20 @ 1
[ 2.516153] initcall quota_init+0x0/0x20 returned 0 after 8 usecs
[ 2.522260] calling proc_cmdline_init+0x0/0x1c @ 1
[ 2.527156] initcall proc_cmdline_init+0x0/0x1c returned 0 after 4 usecs
[ 2.533869] calling proc_cpuinfo_init+0x0/0x1c @ 1
[ 2.538761] initcall proc_cpuinfo_init+0x0/0x1c returned 0 after 3 usecs
[ 2.545475] calling proc_devices_init+0x0/0x1c @ 1
[ 2.550367] initcall proc_devices_init+0x0/0x1c returned 0 after 3 usecs
[ 2.557079] calling proc_interrupts_init+0x0/0x1c @ 1
[ 2.562230] initcall proc_interrupts_init+0x0/0x1c returned 0 after 3 usecs
[ 2.569204] calling proc_loadavg_init+0x0/0x1c @ 1
[ 2.574097] initcall proc_loadavg_init+0x0/0x1c returned 0 after 3 usecs
[ 2.580807] calling proc_meminfo_init+0x0/0x1c @ 1
[ 2.585701] initcall proc_meminfo_init+0x0/0x1c returned 0 after 4 usecs
[ 2.592412] calling proc_stat_init+0x0/0x1c @ 1
[ 2.597045] initcall proc_stat_init+0x0/0x1c returned 0 after 3 usecs
[ 2.603498] calling proc_uptime_init+0x0/0x1c @ 1
[ 2.608303] initcall proc_uptime_init+0x0/0x1c returned 0 after 3 usecs
[ 2.614929] calling proc_version_init+0x0/0x1c @ 1
[ 2.619820] initcall proc_version_init+0x0/0x1c returned 0 after 3 usecs
[ 2.626534] calling proc_softirqs_init+0x0/0x1c @ 1
[ 2.631513] initcall proc_softirqs_init+0x0/0x1c returned 0 after 3 usecs
[ 2.638312] calling proc_kcore_init+0x0/0xa2 @ 1
[ 2.643052] initcall proc_kcore_init+0x0/0xa2 returned 0 after 23 usecs
[ 2.649675] calling proc_kmsg_init+0x0/0x1f @ 1
[ 2.654307] initcall proc_kmsg_init+0x0/0x1f returned 0 after 3 usecs
[ 2.660759] calling proc_page_init+0x0/0x37 @ 1
[ 2.665396] initcall proc_page_init+0x0/0x37 returned 0 after 6 usecs
[ 2.671843] calling init_devpts_fs+0x0/0x3d @ 1
[ 2.676550] initcall init_devpts_fs+0x0/0x3d returned 0 after 75 usecs
[ 2.683086] calling init_ext3_fs+0x0/0x64 @ 1
[ 2.687594] initcall init_ext3_fs+0x0/0x64 returned 0 after 53 usecs
[ 2.693960] calling init_ext2_fs+0x0/0x64 @ 1
[ 2.698448] initcall init_ext2_fs+0x0/0x64 returned 0 after 29 usecs
[ 2.704812] calling journal_init+0x0/0x85 @ 1
[ 2.709322] initcall journal_init+0x0/0x85 returned 0 after 52 usecs
[ 2.715689] calling init_ramfs_fs+0x0/0xf @ 1
[ 2.720147] initcall init_ramfs_fs+0x0/0xf returned 0 after 2 usecs
[ 2.726428] calling init_hugetlbfs_fs+0x0/0x82 @ 1
[ 2.731428] initcall init_hugetlbfs_fs+0x0/0x82 returned 0 after 108 usecs
[ 2.738310] calling init_nls_utf8+0x0/0x1f @ 1
[ 2.742872] initcall init_nls_utf8+0x0/0x1f returned 0 after 19 usecs
[ 2.749324] calling ipc_init+0x0/0x20 @ 1
[ 2.753439] msgmni has been set to 1728
[ 2.757295] initcall ipc_init+0x0/0x20 returned 0 after 3770 usecs
[ 2.763485] calling ipc_sysctl_init+0x0/0x11 @ 1
[ 2.768204] initcall ipc_sysctl_init+0x0/0x11 returned 0 after 2 usecs
[ 2.774744] calling init_mqueue_fs+0x0/0xa3 @ 1
[ 2.779490] initcall init_mqueue_fs+0x0/0xa3 returned 0 after 114 usecs
[ 2.786117] calling crypto_wq_init+0x0/0x2f @ 1
[ 2.790834] initcall crypto_wq_init+0x0/0x2f returned 0 after 88 usecs
[ 2.797374] calling crypto_algapi_init+0x0/0xc @ 1
[ 2.802264] initcall crypto_algapi_init+0x0/0xc returned 0 after 4 usecs
[ 2.808977] calling skcipher_module_init+0x0/0x2c @ 1
[ 2.814126] initcall skcipher_module_init+0x0/0x2c returned 0 after 0 usecs
[ 2.821091] calling chainiv_module_init+0x0/0xf @ 1
[ 2.826078] initcall chainiv_module_init+0x0/0xf returned 0 after 9 usecs
[ 2.832872] calling eseqiv_module_init+0x0/0xf @ 1
[ 2.837761] initcall eseqiv_module_init+0x0/0xf returned 0 after 1 usecs
[ 2.844466] calling hmac_module_init+0x0/0xf @ 1
[ 2.849185] initcall hmac_module_init+0x0/0xf returned 0 after 1 usecs
[ 2.855717] calling md5_mod_init+0x0/0xf @ 1
[ 2.860182] initcall md5_mod_init+0x0/0xf returned 0 after 93 usecs
[ 2.866465] calling sha1_generic_mod_init+0x0/0xf @ 1
[ 2.871691] initcall sha1_generic_mod_init+0x0/0xf returned 0 after 77 usecs
[ 2.878756] calling sha256_generic_mod_init+0x0/0x33 @ 1
[ 2.884314] initcall sha256_generic_mod_init+0x0/0x33 returned 0 after 147 usecs
[ 2.891723] calling sha512_generic_mod_init+0x0/0x33 @ 1
[ 2.897384] initcall sha512_generic_mod_init+0x0/0x33 returned 0 after 242 usecs
[ 2.904789] calling crypto_ecb_module_init+0x0/0xf @ 1
[ 2.910023] initcall crypto_ecb_module_init+0x0/0xf returned 0 after 1 usecs
[ 2.917076] calling crypto_cbc_module_init+0x0/0xf @ 1
[ 2.922313] initcall crypto_cbc_module_init+0x0/0xf returned 0 after 1 usecs
[ 2.929364] calling des_generic_mod_init+0x0/0x33 @ 1
[ 2.934664] initcall des_generic_mod_init+0x0/0x33 returned 0 after 146 usecs
[ 2.941809] calling aes_init+0x0/0xf @ 1
[ 2.945926] initcall aes_init+0x0/0xf returned 0 after 85 usecs
[ 2.951860] calling arc4_init+0x0/0xf @ 1
[ 2.956067] initcall arc4_init+0x0/0xf returned 0 after 99 usecs
[ 2.962089] calling deflate_mod_init+0x0/0xf @ 1
[ 2.967307] initcall deflate_mod_init+0x0/0xf returned 0 after 484 usecs
[ 2.974019] calling crypto_authenc_module_init+0x0/0xf @ 1
[ 2.979601] initcall crypto_authenc_module_init+0x0/0xf returned 0 after 1 usecs
[ 2.986999] calling krng_mod_init+0x0/0xf @ 1
[ 2.991506] alg: No test for stdrng (krng)
[ 2.995633] initcall krng_mod_init+0x0/0xf returned 0 after 4076 usecs
[ 3.002172] calling proc_genhd_init+0x0/0x31 @ 1
[ 3.006906] initcall proc_genhd_init+0x0/0x31 returned 0 after 12 usecs
[ 3.013532] calling noop_init+0x0/0x11 @ 1
[ 3.017760] io scheduler noop registered
[ 3.021695] initcall noop_init+0x0/0x11 returned 0 after 3875 usecs
[ 3.027970] calling deadline_init+0x0/0x11 @ 1
[ 3.032510] io scheduler deadline registered
[ 3.036793] initcall deadline_init+0x0/0x11 returned 0 after 4181 usecs
[ 3.043415] calling cfq_init+0x0/0x89 @ 1
[ 3.047562] io scheduler cfq registered (default)
[ 3.052281] initcall cfq_init+0x0/0x89 returned 0 after 4645 usecs
[ 3.058468] calling percpu_counter_startup+0x0/0x29 @ 1
[ 3.063791] initcall percpu_counter_startup+0x0/0x29 returned 0 after 0 usecs
[ 3.070930] calling pci_proc_init+0x0/0x5b @ 1
[ 3.075581] initcall pci_proc_init+0x0/0x5b returned 0 after 105 usecs
[ 3.082119] calling pcie_portdrv_init+0x0/0x4b @ 1
[ 3.087299] initcall pcie_portdrv_init+0x0/0x4b returned 0 after 280 usecs
[ 3.094188] calling aer_service_init+0x0/0x28 @ 1
[ 3.099071] initcall aer_service_init+0x0/0x28 returned 0 after 73 usecs
[ 3.105786] calling ioapic_init+0x0/0x16 @ 1
[ 3.110252] initcall ioapic_init+0x0/0x16 returned 0 after 91 usecs
[ 3.116530] calling acpi_reserve_resources+0x0/0xc8 @ 1
[ 3.121865] initcall acpi_reserve_resources+0x0/0xc8 returned 0 after 6 usecs
[ 3.129007] calling irqrouter_init_sysfs+0x0/0x33 @ 1
[ 3.134296] initcall irqrouter_init_sysfs+0x0/0x33 returned 0 after 135 usecs
[ 3.141449] calling acpi_ac_init+0x0/0x25 @ 1
[ 3.146025] initcall acpi_ac_init+0x0/0x25 returned 0 after 114 usecs
[ 3.152478] calling acpi_button_init+0x0/0x4a @ 1
[ 3.157531] input: Power Button as /class/input/input0
[ 3.162737] ACPI: Power Button [PWRB]
[ 3.166601] input: Power Button as /class/input/input1
[ 3.171758] ACPI: Power Button [PWRF]
[ 3.175528] initcall acpi_button_init+0x0/0x4a returned 0 after 17820 usecs
[ 3.182504] calling acpi_fan_init+0x0/0x15 @ 1
[ 3.187147] initcall acpi_fan_init+0x0/0x15 returned 0 after 93 usecs
[ 3.193603] calling acpi_pci_slot_init+0x0/0x1b @ 1
[ 3.199075] initcall acpi_pci_slot_init+0x0/0x1b returned 0 after 478 usecs
[ 3.206047] calling acpi_processor_init+0x0/0x81 @ 1
[ 3.211132] ACPI: acpi_idle registered with cpuidle
[ 3.211770] initcall acpi_processor_init+0x0/0x81 returned 0 after 645 usecs
[ 3.218833] calling acpi_thermal_init+0x0/0x6f @ 1
[ 3.223849] initcall acpi_thermal_init+0x0/0x6f returned 0 after 117 usecs
[ 3.230741] calling rand_initialize+0x0/0x25 @ 1
[ 3.235514] initcall rand_initialize+0x0/0x25 returned 0 after 50 usecs
[ 3.242135] calling pty_init+0x0/0x40d @ 1
[ 3.299967] initcall pty_init+0x0/0x40d returned 0 after 52375 usecs
[ 3.306386] calling sysrq_init+0x0/0x6d @ 1
[ 3.310688] initcall sysrq_init+0x0/0x6d returned 0 after 14 usecs
[ 3.316879] calling n_hdlc_init+0x0/0x81 @ 1
[ 3.321245] HDLC line discipline maxframe=4096
[ 3.325699] N_HDLC line discipline registered.
[ 3.330154] initcall n_hdlc_init+0x0/0x81 returned 0 after 8698 usecs
[ 3.336603] calling rtc_init+0x0/0xf8 @ 1
[ 3.340824] Real Time Clock Driver v1.12b
[ 3.344877] initcall rtc_init+0x0/0xf8 returned 0 after 4068 usecs
[ 3.351067] calling hpet_init+0x0/0x57 @ 1
[ 3.355669] initcall hpet_init+0x0/0x57 returned 0 after 396 usecs
[ 3.361870] calling nvram_init+0x0/0x70 @ 1
[ 3.366296] Non-volatile memory driver v1.3
[ 3.370495] initcall nvram_init+0x0/0x70 returned 0 after 4236 usecs
[ 3.376860] calling agp_init+0x0/0x21 @ 1
[ 3.380966] Linux agpgart interface v0.103
[ 3.385076] initcall agp_init+0x0/0x21 returned 0 after 4012 usecs
[ 3.391264] calling agp_amd64_mod_init+0x0/0xa @ 1
[ 3.396611] initcall agp_amd64_mod_init+0x0/0xa returned -19 after 448 usecs
[ 3.403666] calling hangcheck_init+0x0/0x99 @ 1
[ 3.408295] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 3.417261] Hangcheck: Using getrawmonotonic().
[ 3.421812] initcall hangcheck_init+0x0/0x99 returned 0 after 13198 usecs
[ 3.428609] calling serial8250_init+0x0/0x14d @ 1
[ 3.433410] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
[ 3.439958] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.446372] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 3.452609] initcall serial8250_init+0x0/0x14d returned 0 after 18747 usecs
[ 3.459587] calling serial8250_pnp_init+0x0/0xf @ 1
[ 3.465449] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.471629] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 3.477463] initcall serial8250_pnp_init+0x0/0xf returned 0 after 12588 usecs
[ 3.484609] calling serial8250_pci_init+0x0/0x16 @ 1
[ 3.489791] initcall serial8250_pci_init+0x0/0x16 returned 0 after 112 usecs
[ 3.496863] calling topology_sysfs_init+0x0/0x47 @ 1
[ 3.501951] initcall topology_sysfs_init+0x0/0x47 returned 0 after 18 usecs
[ 3.508924] calling loop_init+0x0/0x16c @ 1
[ 3.515032] loop: module loaded
[ 3.518215] initcall loop_init+0x0/0x16c returned 0 after 4891 usecs
[ 3.524577] calling net_olddevs_init+0x0/0x82 @ 1
[ 3.529385] initcall net_olddevs_init+0x0/0x82 returned 0 after 5 usecs
[ 3.536008] calling tun_init+0x0/0x79 @ 1
[ 3.540117] tun: Universal TUN/TAP device driver, 1.6
[ 3.545175] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 3.551502] initcall tun_init+0x0/0x79 returned 0 after 11117 usecs
[ 3.557807] calling rtl8169_init_module+0x0/0x16 @ 1
[ 3.562892] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.568546] r8169 0000:02:0f.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.575466] r8169 0000:02:0f.0: (unregistered net_device): no PCI Express capability
[ 3.583581] r8169 0000:02:0f.0: eth0: RTL8169sc/8110sc at 0xf848c000, 00:1f:d0:5b:61:a9, XID 18000000 IRQ 23
[ 3.598366] initcall rtl8169_init_module+0x0/0x16 returned 0 after 34666 usecs
[ 3.605602] calling spi_transport_init+0x0/0x65 @ 1
[ 3.610746] initcall spi_transport_init+0x0/0x65 returned 0 after 163 usecs
[ 3.617722] calling init_sd+0x0/0x125 @ 1
[ 3.622029] initcall init_sd+0x0/0x125 returned 0 after 184 usecs
[ 3.628141] calling init_sg+0x0/0xaf @ 1
[ 3.632285] initcall init_sg+0x0/0xaf returned 0 after 113 usecs
[ 3.638303] calling ahci_init+0x0/0x16 @ 1
[ 3.642536] ahci 0000:00:12.0: version 3.0
[ 3.642562] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.649387] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 3.656576] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 3.664678] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
[ 3.672063] scsi0 : ahci
[ 3.675033] scsi1 : ahci
[ 3.677812] scsi2 : ahci
[ 3.680544] scsi3 : ahci
[ 3.683534] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 3.690937] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 3.698337] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 3.705897] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 3.713409] calling 1_async_port_probe+0x0/0x9d @ 1023
[ 3.713512] initcall ahci_init+0x0/0x16 returned 0 after 69345 usecs
[ 3.713516] calling atiixp_init+0x0/0x16 @ 1
[ 3.713567] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.713753] scsi4 : pata_atiixp
[ 3.713890] scsi5 : pata_atiixp
[ 3.715869] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 3.715871] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 3.715961] initcall atiixp_init+0x0/0x16 returned 0 after 2382 usecs
[ 3.715964] calling ohci1394_init+0x0/0x16 @ 1
[ 3.716050] initcall ohci1394_init+0x0/0x16 returned 0 after 79 usecs
[ 3.716054] calling ohci_hcd_mod_init+0x0/0x75 @ 1
[ 3.716057] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.716060] ohci_hcd: block sizes: ed 64 td 64
[ 3.716083] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.716110] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 3.716512] drivers/usb/core/inode.c: creating file 'devices'
[ 3.716591] drivers/usb/core/inode.c: creating file '001'
[ 3.716621] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 3.716640] ohci_hcd 0000:00:13.0: created debug files
[ 3.716642] ohci_hcd 0000:00:13.0: supports USB remote wakeup
[ 3.716680] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
[ 3.718304] calling 2_async_port_probe+0x0/0x9d @ 1024
[ 3.718494] calling 3_async_port_probe+0x0/0x9d @ 1032
[ 3.718552] calling 4_async_port_probe+0x0/0x9d @ 1033
[ 3.718588] calling 5_async_port_probe+0x0/0x9d @ 1034
[ 3.718802] calling 6_async_port_probe+0x0/0x9d @ 1035
[ 3.771334] ohci_hcd 0000:00:13.0: OHCI controller state
[ 3.771340] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers
[ 3.771346] ohci_hcd 0000:00:13.0: control 0x283 RWC HCFS=operational CBSR=3
[ 3.771351] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
[ 3.771355] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
[ 3.771361] ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 3.771381] ohci_hcd 0000:00:13.0: hcca frame #0005
[ 3.771385] ohci_hcd 0000:00:13.0: roothub.a 02000202 POTPGT=2 NPS NDP=2(2)
[ 3.771390] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 3.771396] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
[ 3.771403] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00010101 CSC PPS CCS
[ 3.771408] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00010301 CSC LSDA PPS CCS
[ 3.771561] usb usb1: default language 0x0409
[ 3.771577] usb usb1: udev 1, busnum 1, minor = 0
[ 3.771579] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.771582] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.771585] usb usb1: Product: OHCI Host Controller
[ 3.771587] usb usb1: Manufacturer: Linux 2.6.35.4-git+ ohci_hcd
[ 3.771589] usb usb1: SerialNumber: 0000:00:13.0
[ 3.771976] usb usb1: usb_probe_device
[ 3.771979] usb usb1: configuration #1 chosen from 1 choice
[ 3.772124] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 3.772323] hub 1-0:1.0: usb_probe_interface
[ 3.772326] hub 1-0:1.0: usb_probe_interface - got id
[ 3.772328] hub 1-0:1.0: USB hub found
[ 3.772378] hub 1-0:1.0: 2 ports detected
[ 3.772381] hub 1-0:1.0: standalone hub
[ 3.772383] hub 1-0:1.0: no power switching (usb 1.0)
[ 3.772385] hub 1-0:1.0: global over-current protection
[ 3.772387] hub 1-0:1.0: power on to power good time: 4ms
[ 3.772496] hub 1-0:1.0: local power source is good
[ 3.772498] hub 1-0:1.0: no over-current condition exists
[ 3.772501] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 3.772883] drivers/usb/core/inode.c: creating file '001'
[ 3.773008] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.773034] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 3.773045] drivers/usb/core/inode.c: creating file '002'
[ 3.773055] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 3.773074] ohci_hcd 0000:00:13.1: created debug files
[ 3.773076] ohci_hcd 0000:00:13.1: supports USB remote wakeup
[ 3.773115] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
[ 3.827296] ohci_hcd 0000:00:13.1: OHCI controller state
[ 3.827302] ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers
[ 3.827308] ohci_hcd 0000:00:13.1: control 0x283 RWC HCFS=operational CBSR=3
[ 3.827313] ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0
[ 3.827318] ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF
[ 3.827323] ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 3.827342] ohci_hcd 0000:00:13.1: hcca frame #0005
[ 3.827347] ohci_hcd 0000:00:13.1: roothub.a 02000202 POTPGT=2 NPS NDP=2(2)
[ 3.827352] ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000
[ 3.827356] ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE
[ 3.827360] ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00010101 CSC PPS CCS
[ 3.827366] ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00010301 CSC LSDA PPS CCS
[ 3.827390] usb usb2: default language 0x0409
[ 3.827405] usb usb2: udev 1, busnum 2, minor = 128
[ 3.827407] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.827410] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.827412] usb usb2: Product: OHCI Host Controller
[ 3.827414] usb usb2: Manufacturer: Linux 2.6.35.4-git+ ohci_hcd
[ 3.827417] usb usb2: SerialNumber: 0000:00:13.1
[ 3.827590] usb usb2: usb_probe_device
[ 3.827593] usb usb2: configuration #1 chosen from 1 choice
[ 3.827606] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 3.827711] hub 2-0:1.0: usb_probe_interface
[ 3.827713] hub 2-0:1.0: usb_probe_interface - got id
[ 3.827716] hub 2-0:1.0: USB hub found
[ 3.827729] hub 2-0:1.0: 2 ports detected
[ 3.827732] hub 2-0:1.0: standalone hub
[ 3.827733] hub 2-0:1.0: no power switching (usb 1.0)
[ 3.827735] hub 2-0:1.0: global over-current protection
[ 3.827738] hub 2-0:1.0: power on to power good time: 4ms
[ 3.827752] hub 2-0:1.0: local power source is good
[ 3.827754] hub 2-0:1.0: no over-current condition exists
[ 3.827756] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 3.827874] drivers/usb/core/inode.c: creating file '001'
[ 3.827949] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.827967] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 3.827977] drivers/usb/core/inode.c: creating file '003'
[ 3.827986] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 3.828005] ohci_hcd 0000:00:13.2: created debug files
[ 3.828007] ohci_hcd 0000:00:13.2: supports USB remote wakeup
[ 3.828046] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
[ 3.881543] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
[ 3.881550] hub 1-0:1.0: port 1: status 0101 change 0001
[ 3.881643] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS
[ 3.881648] hub 1-0:1.0: port 2: status 0301 change 0001
[ 3.881664] async_waiting @ 1035
[ 3.885704] ohci_hcd 0000:00:13.2: OHCI controller state
[ 3.885708] ohci_hcd 0000:00:13.2: OHCI 1.0, NO legacy support registers
[ 3.885712] ohci_hcd 0000:00:13.2: control 0x283 RWC HCFS=operational CBSR=3
[ 3.885718] ohci_hcd 0000:00:13.2: cmdstatus 0x00000 SOC=0
[ 3.885722] ohci_hcd 0000:00:13.2: intrstatus 0x00000004 SF
[ 3.885728] ohci_hcd 0000:00:13.2: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 3.885748] ohci_hcd 0000:00:13.2: hcca frame #0005
[ 3.885752] ohci_hcd 0000:00:13.2: roothub.a 02000202 POTPGT=2 NPS NDP=2(2)
[ 3.885757] ohci_hcd 0000:00:13.2: roothub.b 00000000 PPCM=0000 DR=0000
[ 3.885761] ohci_hcd 0000:00:13.2: roothub.status 00008000 DRWE
[ 3.885767] ohci_hcd 0000:00:13.2: roothub.portstatus [0] 0x00010101 CSC PPS CCS
[ 3.885773] ohci_hcd 0000:00:13.2: roothub.portstatus [1] 0x00010101 CSC PPS CCS
[ 3.885794] usb usb3: default language 0x0409
[ 3.885809] usb usb3: udev 1, busnum 3, minor = 256
[ 3.885811] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.885814] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.885816] usb usb3: Product: OHCI Host Controller
[ 3.885818] usb usb3: Manufacturer: Linux 2.6.35.4-git+ ohci_hcd
[ 3.885821] usb usb3: SerialNumber: 0000:00:13.2
[ 3.886007] usb usb3: usb_probe_device
[ 3.886010] usb usb3: configuration #1 chosen from 1 choice
[ 3.886023] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 3.886141] hub 3-0:1.0: usb_probe_interface
[ 3.886144] hub 3-0:1.0: usb_probe_interface - got id
[ 3.886146] hub 3-0:1.0: USB hub found
[ 3.886160] hub 3-0:1.0: 2 ports detected
[ 3.886162] hub 3-0:1.0: standalone hub
[ 3.886164] hub 3-0:1.0: no power switching (usb 1.0)
[ 3.886166] hub 3-0:1.0: global over-current protection
[ 3.886169] hub 3-0:1.0: power on to power good time: 4ms
[ 3.886182] hub 3-0:1.0: local power source is good
[ 3.886184] hub 3-0:1.0: no over-current condition exists
[ 3.886187] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 3.886328] drivers/usb/core/inode.c: creating file '001'
[ 3.886401] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.886423] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 3.886434] drivers/usb/core/inode.c: creating file '004'
[ 3.886443] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4
[ 3.886461] ohci_hcd 0000:00:13.3: created debug files
[ 3.886463] ohci_hcd 0000:00:13.3: supports USB remote wakeup
[ 3.886472] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
[ 3.896272] async_waiting @ 1034
[ 3.927286] ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
[ 3.927292] hub 2-0:1.0: port 1: status 0101 change 0001
[ 3.927328] ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS
[ 3.927333] hub 2-0:1.0: port 2: status 0301 change 0001
[ 3.941296] ohci_hcd 0000:00:13.3: OHCI controller state
[ 3.941300] ohci_hcd 0000:00:13.3: OHCI 1.0, NO legacy support registers
[ 3.941307] ohci_hcd 0000:00:13.3: control 0x283 RWC HCFS=operational CBSR=3
[ 3.941312] ohci_hcd 0000:00:13.3: cmdstatus 0x00000 SOC=0
[ 3.941316] ohci_hcd 0000:00:13.3: intrstatus 0x00000004 SF
[ 3.941322] ohci_hcd 0000:00:13.3: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 3.941342] ohci_hcd 0000:00:13.3: hcca frame #0005
[ 3.941346] ohci_hcd 0000:00:13.3: roothub.a 02000202 POTPGT=2 NPS NDP=2(2)
[ 3.941351] ohci_hcd 0000:00:13.3: roothub.b 00000000 PPCM=0000 DR=0000
[ 3.941356] ohci_hcd 0000:00:13.3: roothub.status 00008000 DRWE
[ 3.941362] ohci_hcd 0000:00:13.3: roothub.portstatus [0] 0x00010101 CSC PPS CCS
[ 3.941367] ohci_hcd 0000:00:13.3: roothub.portstatus [1] 0x00010101 CSC PPS CCS
[ 3.941388] usb usb4: default language 0x0409
[ 3.941403] usb usb4: udev 1, busnum 4, minor = 384
[ 3.941405] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.941408] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.941411] usb usb4: Product: OHCI Host Controller
[ 3.941413] usb usb4: Manufacturer: Linux 2.6.35.4-git+ ohci_hcd
[ 3.941415] usb usb4: SerialNumber: 0000:00:13.3
[ 3.941600] usb usb4: usb_probe_device
[ 3.941603] usb usb4: configuration #1 chosen from 1 choice
[ 3.941616] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 3.941718] hub 4-0:1.0: usb_probe_interface
[ 3.941720] hub 4-0:1.0: usb_probe_interface - got id
[ 3.941722] hub 4-0:1.0: USB hub found
[ 3.941741] hub 4-0:1.0: 2 ports detected
[ 3.941743] hub 4-0:1.0: standalone hub
[ 3.941745] hub 4-0:1.0: no power switching (usb 1.0)
[ 3.941747] hub 4-0:1.0: global over-current protection
[ 3.941749] hub 4-0:1.0: power on to power good time: 4ms
[ 3.941763] hub 4-0:1.0: local power source is good
[ 3.941765] hub 4-0:1.0: no over-current condition exists
[ 3.941768] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 3.941888] drivers/usb/core/inode.c: creating file '001'
[ 3.941958] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.941976] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 3.941987] drivers/usb/core/inode.c: creating file '005'
[ 3.942008] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5
[ 3.942025] ohci_hcd 0000:00:13.4: created debug files
[ 3.942027] ohci_hcd 0000:00:13.4: supports USB remote wakeup
[ 3.942036] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
[ 3.981317] hub 1-0:1.0: state 7 ports 2 chg 0006 evt 0000
[ 3.981337] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 3.985294] ohci_hcd 0000:00:13.2: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
[ 3.985299] hub 3-0:1.0: port 1: status 0101 change 0001
[ 3.985334] ohci_hcd 0000:00:13.2: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS
[ 3.985340] hub 3-0:1.0: port 2: status 0101 change 0001
[ 3.996296] ohci_hcd 0000:00:13.4: OHCI controller state
[ 3.996300] ohci_hcd 0000:00:13.4: OHCI 1.0, NO legacy support registers
[ 3.996306] ohci_hcd 0000:00:13.4: control 0x283 RWC HCFS=operational CBSR=3
[ 3.996311] ohci_hcd 0000:00:13.4: cmdstatus 0x00000 SOC=0
[ 3.996316] ohci_hcd 0000:00:13.4: intrstatus 0x00000004 SF
[ 3.996321] ohci_hcd 0000:00:13.4: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 3.996342] ohci_hcd 0000:00:13.4: hcca frame #0005
[ 3.996347] ohci_hcd 0000:00:13.4: roothub.a 02000202 POTPGT=2 NPS NDP=2(2)
[ 3.996352] ohci_hcd 0000:00:13.4: roothub.b 00000000 PPCM=0000 DR=0000
[ 3.996356] ohci_hcd 0000:00:13.4: roothub.status 00008000 DRWE
[ 3.996363] ohci_hcd 0000:00:13.4: roothub.portstatus [0] 0x00010101 CSC PPS CCS
[ 3.996368] ohci_hcd 0000:00:13.4: roothub.portstatus [1] 0x00010101 CSC PPS CCS
[ 3.996389] usb usb5: default language 0x0409
[ 3.996404] usb usb5: udev 1, busnum 5, minor = 512
[ 3.996407] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.996410] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.996412] usb usb5: Product: OHCI Host Controller
[ 3.996414] usb usb5: Manufacturer: Linux 2.6.35.4-git+ ohci_hcd
[ 3.996417] usb usb5: SerialNumber: 0000:00:13.4
[ 3.996654] usb usb5: usb_probe_device
[ 3.996657] usb usb5: configuration #1 chosen from 1 choice
[ 3.996670] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 3.996769] hub 5-0:1.0: usb_probe_interface
[ 3.996772] hub 5-0:1.0: usb_probe_interface - got id
[ 3.996774] hub 5-0:1.0: USB hub found
[ 3.996788] hub 5-0:1.0: 2 ports detected
[ 3.996790] hub 5-0:1.0: standalone hub
[ 3.996792] hub 5-0:1.0: no power switching (usb 1.0)
[ 3.996794] hub 5-0:1.0: global over-current protection
[ 3.996797] hub 5-0:1.0: power on to power good time: 4ms
[ 3.996810] hub 5-0:1.0: local power source is good
[ 3.996812] hub 5-0:1.0: no over-current condition exists
[ 3.996815] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 3.996934] drivers/usb/core/inode.c: creating file '001'
[ 3.997075] initcall ohci_hcd_mod_init+0x0/0x75 returned 0 after 274427 usecs
[ 3.997078] calling usb_stor_init+0x0/0x38 @ 1
[ 3.997081] Initializing USB Mass Storage driver...
[ 3.997177] usbcore: registered new interface driver usb-storage
[ 3.997179] USB Mass Storage support registered.
[ 3.997184] initcall usb_stor_init+0x0/0x38 returned 0 after 98 usecs
[ 3.997187] calling i8042_init+0x0/0x334 @ 1
[ 3.997587] PNP: No PS/2 controller found. Probing ports directly.
[ 3.998361] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.998394] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.998464] initcall i8042_init+0x0/0x334 returned 0 after 1241 usecs
[ 3.998467] calling evdev_init+0x0/0xf @ 1
[ 3.998838] initcall evdev_init+0x0/0xf returned 0 after 357 usecs
[ 3.998841] calling atkbd_init+0x0/0x20 @ 1
[ 3.998925] initcall atkbd_init+0x0/0x20 returned 0 after 77 usecs
[ 3.998928] calling i2c_dev_init+0x0/0x9c @ 1
[ 3.998932] i2c /dev entries driver
[ 3.999066] initcall i2c_dev_init+0x0/0x9c returned 0 after 129 usecs
[ 3.999070] calling sm_it87_init+0x0/0x36c @ 1
[ 3.999132] it87: Found IT8716F chip at 0x228, revision 3
[ 3.999158] it87: in3 is VCC (+5V)
[ 3.999160] it87: in7 is VCCH (+5V Stand-By)
[ 3.999167] it87: Beeping is supported
[ 3.999977] initcall sm_it87_init+0x0/0x36c returned 0 after 880 usecs
[ 3.999980] calling raid_init+0x0/0xf @ 1
[ 4.000014] md: raid1 personality registered for level 1
[ 4.000020] initcall raid_init+0x0/0xf returned 0 after 34 usecs
[ 4.000023] calling dm_init+0x0/0x38 @ 1
[ 4.274390] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.274433] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
[ 4.279857] ohci_hcd 0000:00:13.3: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
[ 4.279865] hub 4-0:1.0: port 1: status 0101 change 0001
[ 4.279896] ohci_hcd 0000:00:13.3: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS
[ 4.279902] hub 4-0:1.0: port 2: status 0101 change 0001
[ 4.279917] ohci_hcd 0000:00:13.4: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
[ 4.279923] hub 5-0:1.0: port 1: status 0101 change 0001
[ 4.279953] ohci_hcd 0000:00:13.4: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS
[ 4.279958] hub 5-0:1.0: port 2: status 0101 change 0001
[ 4.279990] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@xxxxxxxxxx
[ 4.288444] initcall dm_init+0x0/0x38 returned 0 after 281653 usecs
[ 4.290274] async_waiting @ 1032
[ 4.297955] calling dm_crypt_init+0x0/0x5a @ 1
[ 4.302516] initcall dm_crypt_init+0x0/0x5a returned 0 after 19 usecs
[ 4.308962] calling cpufreq_stats_init+0x0/0x84 @ 1
[ 4.313968] initcall cpufreq_stats_init+0x0/0x84 returned 0 after 31 usecs
[ 4.320853] calling cpufreq_gov_powersave_init+0x0/0xf @ 1
[ 4.326441] initcall cpufreq_gov_powersave_init+0x0/0xf returned 0 after 2 usecs
[ 4.326459] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 4.340803] calling cpufreq_gov_userspace_init+0x0/0xf @ 1
[ 4.346386] initcall cpufreq_gov_userspace_init+0x0/0xf returned 0 after 1 usecs
[ 4.353785] calling cpufreq_gov_dbs_init+0x0/0xd1 @ 1
[ 4.359380] initcall cpufreq_gov_dbs_init+0x0/0xd1 returned 0 after 433 usecs
[ 4.366537] calling init_ladder+0x0/0xf @ 1
[ 4.370849] cpuidle: using governor ladder
[ 4.374962] initcall init_ladder+0x0/0xf returned 0 after 4044 usecs
[ 4.381327] calling init_menu+0x0/0xf @ 1
[ 4.385439] cpuidle: using governor menu
[ 4.389377] initcall init_menu+0x0/0xf returned 0 after 3845 usecs
[ 4.389389] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
[ 4.395572] calling hid_init+0x0/0x51 @ 1
[ 4.399849] initcall hid_init+0x0/0x51 returned 0 after 166 usecs
[ 4.405980] calling hid_init+0x0/0xb0 @ 1
[ 4.410326] usbcore: registered new interface driver hiddev
[ 4.415998] usbcore: registered new interface driver usbhid
[ 4.421580] usbhid: USB HID core driver
[ 4.425428] initcall hid_init+0x0/0xb0 returned 0 after 14980 usecs
[ 4.431706] calling alsa_timer_init+0x0/0x134 @ 1
[ 4.436881] initcall alsa_timer_init+0x0/0x134 returned 0 after 358 usecs
[ 4.437277] ata4: softreset failed (device not ready)
[ 4.437282] ata4: applying SB600 PMP SRST workaround and retrying
[ 4.454835] calling rtctimer_init+0x0/0xf3 @ 1
[ 4.455290] ata2: softreset failed (device not ready)
[ 4.455295] ata2: applying SB600 PMP SRST workaround and retrying
[ 4.470533] initcall rtctimer_init+0x0/0xf3 returned 0 after 3 usecs
[ 4.476900] calling alsa_pcm_init+0x0/0x4d @ 1
[ 4.481476] initcall alsa_pcm_init+0x0/0x4d returned 0 after 32 usecs
[ 4.487924] calling snd_mem_init+0x0/0x24 @ 1
[ 4.489363] usb 1-1: default language 0x0409
[ 4.491363] usb 1-1: udev 2, busnum 1, minor = 1
[ 4.491366] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 4.491369] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.491371] usb 1-1: Product: USB2.0 Hub
[ 4.491579] usb 1-1: usb_probe_device
[ 4.491583] usb 1-1: configuration #1 chosen from 1 choice
[ 4.493385] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 4.493485] hub 1-1:1.0: usb_probe_interface
[ 4.493488] hub 1-1:1.0: usb_probe_interface - got id
[ 4.493490] hub 1-1:1.0: USB hub found
[ 4.495366] hub 1-1:1.0: 4 ports detected
[ 4.495368] hub 1-1:1.0: standalone hub
[ 4.495370] hub 1-1:1.0: ganged power switching
[ 4.495372] hub 1-1:1.0: global over-current protection
[ 4.495375] hub 1-1:1.0: TT requires at most 32 FS bit times (2664 ns)
[ 4.495377] hub 1-1:1.0: Port indicators are supported
[ 4.495380] hub 1-1:1.0: power on to power good time: 100ms
[ 4.499383] hub 1-1:1.0: local power source is good
[ 4.499385] hub 1-1:1.0: no over-current condition exists
[ 4.499388] hub 1-1:1.0: enabling power on all ports
[ 4.507500] drivers/usb/core/inode.c: creating file '002'
[ 4.507546] hub 1-0:1.0: port 2, status 0301, change 0000, 1.5 Mb/s
[ 4.517905] initcall snd_mem_init+0x0/0x24 returned 0 after 8 usecs
[ 4.524185] calling alsa_mixer_oss_init+0x0/0x2d @ 1
[ 4.529249] initcall alsa_mixer_oss_init+0x0/0x2d returned 0 after 0 usecs
[ 4.536135] calling alsa_pcm_oss_init+0x0/0x72 @ 1
[ 4.541055] initcall alsa_pcm_oss_init+0x0/0x72 returned 0 after 28 usecs
[ 4.547855] calling patch_realtek_init+0x0/0xf @ 1
[ 4.552768] initcall patch_realtek_init+0x0/0xf returned 0 after 23 usecs
[ 4.559563] calling patch_cirrus_init+0x0/0xf @ 1
[ 4.564367] initcall patch_cirrus_init+0x0/0xf returned 0 after 1 usecs
[ 4.570994] calling patch_ca0110_init+0x0/0xf @ 1
[ 4.571284] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
[ 4.575799] initcall patch_ca0110_init+0x0/0xf returned 0 after 1 usecs
[ 4.582425] calling alsa_card_azx_init+0x0/0x16 @ 1
[ 4.587512] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.594811] HDA Intel 0000:00:14.2: irq 40 for MSI/MSI-X
[ 4.595361] hub 1-1:1.0: port 4: status 0101 change 0001
[ 4.605285] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.609767] initcall alsa_card_azx_init+0x0/0x16 returned 0 after 21837 usecs
[ 4.609772] calling alsa_sound_last_init+0x0/0x50 @ 1
[ 4.609775] ALSA device list:
[ 4.609777] #0: HDA ATI SB at 0xfe024000 irq 40
[ 4.609782] initcall alsa_sound_last_init+0x0/0x50 returned 0 after 5 usecs
[ 4.609786] calling flow_cache_init_global+0x0/0x13a @ 1
[ 4.643779] initcall flow_cache_init_global+0x0/0x13a returned 0 after 33190 usecs
[ 4.643808] ata1: SATA link down (SStatus 0 SControl 300)
[ 4.643860] usb 1-2: new low speed USB device using ohci_hcd and address 3
[ 4.643875] async_waiting @ 1023
[ 4.643881] async_continuing @ 1023 after 2 usec
[ 4.643887] initcall 1_async_port_probe+0x0/0x9d returned 0 after 360743 usecs
[ 4.643985] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.644968] ata2.00: HPA detected: current 976771055, native 976773168
[ 4.645069] ata2.00: ATA-8: WDC WD5000AAKS-00V1A0, 05.01D05, max UDMA/133
[ 4.645072] ata2.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.645091] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 4.646272] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 4.646275] ata2.00: configured for UDMA/133
[ 4.646288] async_waiting @ 1024
[ 4.646295] async_continuing @ 1024 after 2 usec
[ 4.646891] scsi 1:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 05.0 PQ: 0 ANSI: 5
[ 4.647576] calling 7_sd_probe_async+0x0/0x1b6 @ 1023
[ 4.647655] sd 1:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[ 4.647748] sd 1:0:0:0: [sda] Write Protect is off
[ 4.647751] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.647790] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.651352] ata4.00: ATA-8: WDC WD5000AAKS-00V1A0, 05.01D05, max UDMA/133
[ 4.651355] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.651374] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 4.652508] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 4.652511] ata4.00: configured for UDMA/133
[ 4.794187] calling llc_init+0x0/0x1b @ 1
[ 4.798302] initcall llc_init+0x0/0x1b returned 0 after 2 usecs
[ 4.804233] calling snap_init+0x0/0x31 @ 1
[ 4.808459] initcall snap_init+0x0/0x31 returned 0 after 30 usecs
[ 4.814564] calling blackhole_module_init+0x0/0xf @ 1
[ 4.819717] initcall blackhole_module_init+0x0/0xf returned 0 after 2 usecs
[ 4.826690] calling sysctl_ipv4_init+0x0/0x71 @ 1
[ 4.831506] initcall sysctl_ipv4_init+0x0/0x71 returned 0 after 14 usecs
[ 4.838216] calling ipip_init+0x0/0x50 @ 1
[ 4.842412] IPv4 over IPv4 tunneling driver
[ 4.846768] async_waiting @ 1033
[ 4.847031] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
[ 4.847157] sda:
[ 4.847920] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 4.847941] initcall 2_async_port_probe+0x0/0x9d returned 0 after 1103153 usecs
[ 4.847954] async_continuing @ 1032 after 544606 usec
[ 4.847958] initcall 3_async_port_probe+0x0/0x9d returned 0 after 1102988 usecs
[ 4.848148] initcall ipip_init+0x0/0x50 returned 0 after 5599 usecs
[ 4.848152] calling ipgre_init+0x0/0x8b @ 1
[ 4.848155] GRE over IPv4 tunneling driver
[ 4.848399] initcall ipgre_init+0x0/0x8b returned 0 after 236 usecs
[ 4.848402] calling init_syncookies+0x0/0x16 @ 1
[ 4.848446] initcall init_syncookies+0x0/0x16 returned 0 after 39 usecs
[ 4.848449] calling ah4_init+0x0/0x5a @ 1
[ 4.848457] initcall ah4_init+0x0/0x5a returned 0 after 2 usecs
[ 4.848460] calling esp4_init+0x0/0x5a @ 1
[ 4.848468] initcall esp4_init+0x0/0x5a returned 0 after 2 usecs
[ 4.848471] calling ipcomp4_init+0x0/0x5a @ 1
[ 4.848479] initcall ipcomp4_init+0x0/0x5a returned 0 after 2 usecs
[ 4.848482] calling ipip_init+0x0/0x88 @ 1
[ 4.848490] initcall ipip_init+0x0/0x88 returned 0 after 2 usecs
[ 4.848493] calling xfrm4_beet_init+0x0/0x14 @ 1
[ 4.848501] initcall xfrm4_beet_init+0x0/0x14 returned 0 after 2 usecs
[ 4.848504] calling tunnel4_init+0x0/0x5a @ 1
[ 4.848512] initcall tunnel4_init+0x0/0x5a returned 0 after 2 usecs
[ 4.848515] calling xfrm4_transport_init+0x0/0x14 @ 1
[ 4.848523] initcall xfrm4_transport_init+0x0/0x14 returned 0 after 2 usecs
[ 4.848526] calling xfrm4_mode_tunnel_init+0x0/0x14 @ 1
[ 4.848534] initcall xfrm4_mode_tunnel_init+0x0/0x14 returned 0 after 2 usecs
[ 4.848539] calling ipv4_netfilter_init+0x0/0xf @ 1
[ 4.848574] initcall ipv4_netfilter_init+0x0/0xf returned 0 after 30 usecs
[ 4.848577] calling inet_diag_init+0x0/0x5d @ 1
[ 4.848596] initcall inet_diag_init+0x0/0x5d returned 0 after 13 usecs
[ 4.848599] calling tcp_diag_init+0x0/0xf @ 1
[ 4.848628] initcall tcp_diag_init+0x0/0xf returned 0 after 23 usecs
[ 4.848631] calling bictcp_register+0x0/0xf @ 1
[ 4.848636] TCP bic registered
[ 4.848640] initcall bictcp_register+0x0/0xf returned 0 after 3 usecs
[ 4.848643] calling cubictcp_register+0x0/0x7f @ 1
[ 4.848647] TCP cubic registered
[ 4.848651] initcall cubictcp_register+0x0/0x7f returned 0 after 2 usecs
[ 4.848654] calling tcp_westwood_register+0x0/0xf @ 1
[ 4.848658] TCP westwood registered
[ 4.848662] initcall tcp_westwood_register+0x0/0xf returned 0 after 2 usecs
[ 4.848665] calling hstcp_register+0x0/0xf @ 1
[ 4.848669] TCP highspeed registered
[ 4.848673] initcall hstcp_register+0x0/0xf returned 0 after 2 usecs
[ 4.848676] calling hybla_register+0x0/0xf @ 1
[ 4.848680] TCP hybla registered
[ 4.848684] initcall hybla_register+0x0/0xf returned 0 after 2 usecs
[ 4.848687] calling htcp_register+0x0/0xf @ 1
[ 4.848691] TCP htcp registered
[ 4.848695] initcall htcp_register+0x0/0xf returned 0 after 3 usecs
[ 4.848698] calling tcp_vegas_register+0x0/0x11 @ 1
[ 4.848702] TCP vegas registered
[ 4.848708] initcall tcp_vegas_register+0x0/0x11 returned 0 after 4 usecs
[ 4.848711] calling tcp_veno_register+0x0/0x11 @ 1
[ 4.848715] TCP veno registered
[ 4.848719] initcall tcp_veno_register+0x0/0x11 returned 0 after 2 usecs
[ 4.848722] calling tcp_scalable_register+0x0/0xf @ 1
[ 4.848726] TCP scalable registered
[ 4.848730] initcall tcp_scalable_register+0x0/0xf returned 0 after 2 usecs
[ 4.848733] calling tcp_lp_register+0x0/0xf @ 1
[ 4.848737] TCP lp registered
[ 4.848741] initcall tcp_lp_register+0x0/0xf returned 0 after 2 usecs
[ 4.848744] calling tcp_yeah_register+0x0/0x11 @ 1
[ 4.848748] TCP yeah registered
[ 4.848752] initcall tcp_yeah_register+0x0/0x11 returned 0 after 2 usecs
[ 4.848755] calling tcp_illinois_register+0x0/0xf @ 1
[ 4.848759] TCP illinois registered
[ 4.848763] initcall tcp_illinois_register+0x0/0xf returned 0 after 2 usecs
[ 4.848767] calling xfrm_user_init+0x0/0x40 @ 1
[ 4.848770] Initializing XFRM netlink socket
[ 4.848801] initcall xfrm_user_init+0x0/0x40 returned 0 after 28 usecs
[ 4.848804] calling inet6_init+0x0/0x2a2 @ 1
[ 5.226733] async_continuing @ 1033 after 1 usec
[ 5.226742] NET: Registered protocol family 10
[ 5.235982] scsi 3:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 05.0 PQ: 0 ANSI: 5
[ 5.236092] lo: Disabled Privacy Extensions
[ 5.236434] tunl0: Disabled Privacy Extensions
[ 5.236566] initcall inet6_init+0x0/0x2a2 returned 0 after 378667 usecs
[ 5.236569] calling ah6_init+0x0/0x5a @ 1
[ 5.236576] initcall ah6_init+0x0/0x5a returned 0 after 2 usecs
[ 5.236579] calling esp6_init+0x0/0x5a @ 1
[ 5.236587] initcall esp6_init+0x0/0x5a returned 0 after 2 usecs
[ 5.236590] calling ipcomp6_init+0x0/0x5a @ 1
[ 5.236598] initcall ipcomp6_init+0x0/0x5a returned 0 after 2 usecs
[ 5.236601] calling xfrm6_tunnel_init+0x0/0xbc @ 1
[ 5.295128] initcall xfrm6_tunnel_init+0x0/0xbc returned 0 after 57149 usecs
[ 5.295405] calling 8_sd_probe_async+0x0/0x1b6 @ 1032
[ 5.295484] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5.295580] sd 3:0:0:0: [sdb] Write Protect is off
[ 5.295583] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.295623] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.312478] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 5.312496] initcall 4_async_port_probe+0x0/0x9d returned 0 after 1556579 usecs
[ 5.312508] async_continuing @ 1034 after 1383039 usec
[ 5.312512] initcall 5_async_port_probe+0x0/0x9d returned 0 after 1556561 usecs
[ 5.312520] async_continuing @ 1035 after 1397316 usec
[ 5.312524] initcall 6_async_port_probe+0x0/0x9d returned 0 after 1556365 usecs
[ 5.366129] calling tunnel6_init+0x0/0x5a @ 1
[ 5.370584] initcall tunnel6_init+0x0/0x5a returned 0 after 1 usecs
[ 5.376855] calling xfrm6_transport_init+0x0/0x14 @ 1
[ 5.382012] initcall xfrm6_transport_init+0x0/0x14 returned 0 after 1 usecs
[ 5.388979] calling xfrm6_mode_tunnel_init+0x0/0x14 @ 1
[ 5.394304] initcall xfrm6_mode_tunnel_init+0x0/0x14 returned 0 after 1 usecs
[ 5.401441] calling xfrm6_ro_init+0x0/0x14 @ 1
[ 5.405985] initcall xfrm6_ro_init+0x0/0x14 returned 0 after 1 usecs
[ 5.412344] calling xfrm6_beet_init+0x0/0x14 @ 1
[ 5.417063] initcall xfrm6_beet_init+0x0/0x14 returned 0 after 1 usecs
[ 5.423594] calling mip6_init+0x0/0xa7 @ 1
[ 5.427789] Mobile IPv6
[ 5.430252] initcall mip6_init+0x0/0xa7 returned 0 after 2404 usecs
[ 5.436526] calling sit_init+0x0/0x50 @ 1
[ 5.440633] IPv6 over IPv4 tunneling driver
[ 5.444965] sda1 sda2 sda3
[ 5.448220] sit0: Disabled Privacy Extensions
[ 5.452643] initcall sit_init+0x0/0x50 returned 0 after 11725 usecs
[ 5.458920] calling ip6_tunnel_init+0x0/0x7a @ 1
[ 5.463915] ip6tnl0: Disabled Privacy Extensions
[ 5.468580] initcall ip6_tunnel_init+0x0/0x7a returned 0 after 4827 usecs
[ 5.475380] calling packet_init+0x0/0x39 @ 1
[ 5.479747] NET: Registered protocol family 17
[ 5.484213] initcall packet_init+0x0/0x39 returned 0 after 4360 usecs
[ 5.490659] calling ipsec_pfkey_init+0x0/0x6b @ 1
[ 5.495464] NET: Registered protocol family 15
[ 5.499916] initcall ipsec_pfkey_init+0x0/0x6b returned 0 after 4351 usecs
[ 5.506795] calling br_init+0x0/0xa7 @ 1
[ 5.510918] Bridge firewalling registered
[ 5.514972] initcall br_init+0x0/0xa7 returned 0 after 4056 usecs
[ 5.521070] calling vlan_proto_init+0x0/0x8d @ 1
[ 5.525784] 802.1Q VLAN Support v1.8 Ben Greear <greearb@xxxxxxxxxxxxxxx>
[ 5.532579] All bugs added by David S. Miller <davem@xxxxxxxxxx>
[ 5.538632] initcall vlan_proto_init+0x0/0x8d returned 0 after 12545 usecs
[ 5.545513] calling powernowk8_init+0x0/0x141 @ 1
[ 5.550315] powernow-k8: Found 1 AMD Athlon(tm) Dual Core Processor 4450e (2 cpu cores) (version 2.20.00)
[ 5.560127] powernow-k8: 0 : fid 0xf (2300 MHz), vid 0xe
[ 5.565706] powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xf
[ 5.571285] powernow-k8: 2 : fid 0xc (2000 MHz), vid 0x11
[ 5.576954] powernow-k8: 3 : fid 0xa (1800 MHz), vid 0x13
[ 5.582620] powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x16
[ 5.588668] usb 1-2: skipped 1 descriptor after interface
[ 5.588751] initcall powernowk8_init+0x0/0x141 returned 0 after 37536 usecs
[ 5.590378] usb 1-2: default language 0x0409
[ 5.595728] calling hpet_insert_resource+0x0/0x1e @ 1
[ 5.600880] initcall hpet_insert_resource+0x0/0x1e returned 0 after 3 usecs
[ 5.607849] calling update_mp_table+0x0/0x58d @ 1
[ 5.612654] initcall update_mp_table+0x0/0x58d returned 0 after 0 usecs
[ 5.617373] usb 1-2: udev 3, busnum 1, minor = 2
[ 5.617376] usb 1-2: New USB device found, idVendor=051d, idProduct=0002
[ 5.617378] usb 1-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 5.617381] usb 1-2: Product: Back-UPS BR 800 FW:9.o5 .I USB FW:o5
[ 5.617383] usb 1-2: Manufacturer: American Power Conversion
[ 5.617386] usb 1-2: SerialNumber: 5B1018T25266
[ 5.649806] calling lapic_insert_resource+0x0/0x45 @ 1
[ 5.655043] initcall lapic_insert_resource+0x0/0x45 returned 0 after 1 usecs
[ 5.662094] calling print_ipi_mode+0x0/0x26 @ 1
[ 5.666724] Using IPI Shortcut mode
[ 5.670226] initcall print_ipi_mode+0x0/0x26 returned 0 after 3419 usecs
[ 5.676933] calling init_lapic_nmi_sysfs+0x0/0x33 @ 1
[ 5.682084] initcall init_lapic_nmi_sysfs+0x0/0x33 returned 0 after 0 usecs
[ 5.689050] calling io_apic_bug_finalize+0x0/0x1a @ 1
[ 5.694200] initcall io_apic_bug_finalize+0x0/0x1a returned 0 after 1 usecs
[ 5.701166] calling check_early_ioremap_leak+0x0/0x5e @ 1
[ 5.706667] initcall check_early_ioremap_leak+0x0/0x5e returned 0 after 0 usecs
[ 5.714059] calling sched_init_debug+0x0/0x7 @ 1
[ 5.718779] initcall sched_init_debug+0x0/0x7 returned 0 after 1 usecs
[ 5.725311] calling init_oops_id+0x0/0x3a @ 1
[ 5.729772] initcall init_oops_id+0x0/0x3a returned 0 after 5 usecs
[ 5.736049] calling disable_boot_consoles+0x0/0x41 @ 1
[ 5.741286] initcall disable_boot_consoles+0x0/0x41 returned 0 after 1 usecs
[ 5.748340] calling pm_qos_power_init+0x0/0xae @ 1
[ 5.753377] sdb:
[ 5.755234] usb 1-2: usb_probe_device
[ 5.755414] initcall pm_qos_power_init+0x0/0xae returned 0 after 2133 usecs
[ 5.755418] calling max_swapfiles_check+0x0/0x7 @ 1
[ 5.755426] initcall max_swapfiles_check+0x0/0x7 returned 0 after 2 usecs
[ 5.755430] calling random32_reseed+0x0/0x83 @ 1
[ 5.755450] initcall random32_reseed+0x0/0x83 returned 0 after 15 usecs
[ 5.755454] calling pci_resource_alignment_sysfs_init+0x0/0x14 @ 1
[ 5.755464] initcall pci_resource_alignment_sysfs_init+0x0/0x14 returned 0 after 5 usecs
[ 5.755468] calling pci_sysfs_init+0x0/0x44 @ 1
[ 5.755850] initcall pci_sysfs_init+0x0/0x44 returned 0 after 369 usecs
[ 5.755853] calling seqgen_init+0x0/0xe @ 1
[ 5.755874] initcall seqgen_init+0x0/0xe returned 0 after 15 usecs
[ 5.755879] calling scsi_complete_async_scans+0x0/0xe6 @ 1
[ 5.755886] initcall scsi_complete_async_scans+0x0/0xe6 returned 0 after 2 usecs
[ 5.755890] calling memmap_init+0x0/0x2c @ 1
[ 5.755954] initcall memmap_init+0x0/0x2c returned 0 after 58 usecs
[ 5.755958] calling pci_mmcfg_late_insert_resources+0x0/0x59 @ 1
[ 5.755966] initcall pci_mmcfg_late_insert_resources+0x0/0x59 returned 0 after 2 usecs
[ 5.755969] calling tcp_congestion_default+0x0/0xf @ 1
[ 5.755976] initcall tcp_congestion_default+0x0/0xf returned 0 after 2 usecs
[ 5.755980] calling initialize_hashrnd+0x0/0x16 @ 1
[ 5.755990] initcall initialize_hashrnd+0x0/0x16 returned 0 after 4 usecs
[ 5.765987] sdb1 sdb2 sdb3
[ 5.885892] usb 1-2: configuration #1 chosen from 1 choice
[ 5.886396] sd 1:0:0:0: [sda] Attached SCSI disk
[ 5.891133] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
[ 5.891219] initcall 7_sd_probe_async+0x0/0x1b6 returned 0 after 1214488 usecs
[ 5.899061] usbhid 1-2:1.0: usb_probe_interface
[ 5.899065] usbhid 1-2:1.0: usb_probe_interface - got id
[ 5.899767] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 5.904686] initcall 8_sd_probe_async+0x0/0x1b6 returned 0 after 594994 usecs
[ 6.213412] drivers/usb/core/file.c: looking for a minor, starting at 96
[ 6.214445] generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS BR 800 FW:9.o5 .I USB FW:o5 ] on usb-0000:00:13.0-2/input0
[ 6.231708] drivers/usb/core/inode.c: creating file '003'
[ 6.231733] async_waiting @ 1
[ 6.231754] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 6.231768] hub 2-0:1.0: state 7 ports 2 chg 0006 evt 0000
[ 6.231777] hub 2-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 6.234942] async_continuing @ 1 after 1 usec
[ 6.239564] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[ 6.293032] ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
[ 6.330625] EXT3-fs: barriers not enabled
[ 6.344028] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 6.361609] kjournald starting. Commit interval 5 seconds
[ 6.361831] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 6.361919] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
[ 6.361928] async_waiting @ 1
[ 6.361933] async_continuing @ 1 after 2 usec
[ 6.389058] Freeing unused kernel memory: 376k freed
[ 6.394694] Write protecting the kernel text: 3160k
[ 6.400051] Write protecting the kernel read-only data: 1344k
[ 6.440028] ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
[ 6.519363] usb 2-1: default language 0x0409
[ 6.531358] usb 2-1: udev 2, busnum 2, minor = 129
[ 6.531362] usb 2-1: New USB device found, idVendor=0572, idProduct=cafe
[ 6.539724] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.548227] usb 2-1: Product: ADSL USB MODEM
[ 6.552784] usb 2-1: Manufacturer: -
[ 6.556562] usb 2-1: SerialNumber: 28217989
[ 6.578311] usb 2-1: usb_probe_device
[ 6.578318] usb 2-1: configuration #1 chosen from 1 choice
[ 6.579369] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
[ 6.579815] drivers/usb/core/inode.c: creating file '002'
[ 6.579871] hub 2-0:1.0: port 2, status 0301, change 0000, 1.5 Mb/s
[ 6.641296] ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
[ 6.692286] usb 2-2: new low speed USB device using ohci_hcd and address 3
[ 6.764022] ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
[ 6.835353] usb 2-2: skipped 1 descriptor after interface
[ 6.837350] usb 2-2: default language 0x0409
[ 6.843351] usb 2-2: udev 3, busnum 2, minor = 130
[ 6.843354] usb 2-2: New USB device found, idVendor=077d, idProduct=1016
[ 6.850518] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.858083] usb 2-2: Product: AirClick USB
[ 6.862410] usb 2-2: Manufacturer: Griffin Technology, Inc.
[ 6.868574] usb 2-2: usb_probe_device
[ 6.868578] usb 2-2: configuration #1 chosen from 1 choice
[ 6.872352] usb 2-2: adding 2-2:1.0 (config #1, interface 0)
[ 6.874510] usbhid 2-2:1.0: usb_probe_interface
[ 6.874513] usbhid 2-2:1.0: usb_probe_interface - got id
[ 6.880365] drivers/usb/core/file.c: looking for a minor, starting at 96
[ 6.880657] generic-usb 0003:077D:1016.0002: hiddev97,hidraw1: USB HID v1.00 Device [Griffin Technology, Inc. AirClick USB] on usb-0000:00:13.1-2/input0
[ 6.895364] drivers/usb/core/inode.c: creating file '003'
[ 6.895420] hub 3-0:1.0: state 7 ports 2 chg 0006 evt 0000
[ 6.895434] hub 3-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 6.958022] ohci_hcd 0000:00:13.2: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
[ 7.008038] usb 3-1: new full speed USB device using ohci_hcd and address 2
[ 7.077043] ohci_hcd 0000:00:13.2: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
[ 7.141267] usb 3-1: ep0 maxpacket = 8
[ 7.147765] usb 3-1: default language 0x0409
[ 7.151764] usb 3-1: udev 2, busnum 3, minor = 257
[ 7.151767] usb 3-1: New USB device found, idVendor=0a5c, idProduct=4500
[ 7.158897] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.166477] usb 3-1: Product: BCM2045B2
[ 7.170634] usb 3-1: Manufacturer: Broadcom
[ 7.175385] usb 3-1: usb_probe_device
[ 7.175390] usb 3-1: configuration #1 chosen from 1 choice
[ 7.175771] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
[ 7.175885] hub 3-1:1.0: usb_probe_interface
[ 7.175888] hub 3-1:1.0: usb_probe_interface - got id
[ 7.175891] hub 3-1:1.0: USB hub found
[ 7.180765] hub 3-1:1.0: 3 ports detected
[ 7.185140] hub 3-1:1.0: compound device; port removable status: FFF
[ 7.185143] hub 3-1:1.0: ganged power switching
[ 7.185145] hub 3-1:1.0: global over-current protection
[ 7.185148] hub 3-1:1.0: power on to power good time: 100ms
[ 7.185765] hub 3-1:1.0: hub controller current requirement: 100mA
[ 7.185768] hub 3-1:1.0: 100mA bus power budget for each child
[ 7.187764] hub 3-1:1.0: no over-current condition exists
[ 7.187767] hub 3-1:1.0: enabling power on all ports
[ 7.193904] drivers/usb/core/inode.c: creating file '002'
[ 7.193952] hub 3-0:1.0: port 2, status 0101, change 0000, 12 Mb/s
[ 7.235456] md: md0 stopped.
[ 7.240505] md: bind<sdb3>
[ 7.243697] md: bind<sda3>
[ 7.246923] md/raid1:md0: active with 2 out of 2 mirrors
[ 7.255279] ohci_hcd 0000:00:13.2: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
[ 7.293770] hub 3-1:1.0: port 1: status 0101 change 0001
[ 7.296997] md0: bitmap initialized from disk: read 8/8 pages, set 206 bits
[ 7.304411] created bitmap (117 pages) for device md0
[ 7.309989] usb 3-2: new full speed USB device using ohci_hcd and address 3
[ 7.324101] md0: detected capacity change from 0 to 498484727808
[ 7.332199] md0: detected capacity change from 0 to 498484727808
[ 7.339884] md0: unknown partition table
[ 7.381034] ohci_hcd 0000:00:13.2: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
[ 7.438487] EXT3-fs: barriers not enabled
[ 7.446025] usb 3-2: ep0 maxpacket = 8
[ 7.446889] kjournald starting. Commit interval 5 seconds
[ 7.447150] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 7.462778] usb 3-2: default language 0x0409
[ 7.470774] usb 3-2: udev 3, busnum 3, minor = 258
[ 7.470777] usb 3-2: New USB device found, idVendor=0403, idProduct=6001
[ 7.477868] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.485456] usb 3-2: Product: USB-to-Serial
[ 7.489891] usb 3-2: Manufacturer: FTDI
[ 7.493993] usb 3-2: SerialNumber: FTB3ODJO
[ 7.498747] usb 3-2: usb_probe_device
[ 7.498752] usb 3-2: configuration #1 chosen from 1 choice
[ 7.499776] usb 3-2: adding 3-2:1.0 (config #1, interface 0)
[ 7.632101] drivers/usb/core/inode.c: creating file '003'
[ 7.632146] hub 4-0:1.0: state 7 ports 2 chg 0006 evt 0000
[ 7.632160] hub 4-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 7.694029] ohci_hcd 0000:00:13.3: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
[ 7.745274] usb 4-1: new full speed USB device using ohci_hcd and address 2
[ 7.815028] ohci_hcd 0000:00:13.3: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
[ 7.879271] usb 4-1: ep0 maxpacket = 8
[ 7.886370] usb 4-1: default language 0x0409
[ 7.888371] usb 4-1: udev 2, busnum 4, minor = 385
[ 7.888374] usb 4-1: New USB device found, idVendor=4348, idProduct=5523
[ 7.895483] usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 7.903041] usb 4-1: Product: USB-SER!
[ 7.907750] usb 4-1: usb_probe_device
[ 7.907755] usb 4-1: configuration #1 chosen from 1 choice
[ 7.908377] usb 4-1: adding 4-1:1.0 (config #1, interface 0)
[ 7.910049] drivers/usb/core/inode.c: creating file '002'
[ 7.910119] hub 4-0:1.0: port 2, status 0101, change 0000, 12 Mb/s
[ 7.971034] ohci_hcd 0000:00:13.3: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
[ 8.022284] usb 4-2: new full speed USB device using ohci_hcd and address 3
[ 8.092038] ohci_hcd 0000:00:13.3: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
[ 8.163378] usb 4-2: default language 0x0409
[ 8.165378] usb 4-2: udev 3, busnum 4, minor = 386
[ 8.165382] usb 4-2: New USB device found, idVendor=05e3, idProduct=0608
[ 8.172480] usb 4-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 8.180153] usb 4-2: Product: USB2.0 Hub
[ 8.184660] usb 4-2: usb_probe_device
[ 8.184665] usb 4-2: configuration #1 chosen from 1 choice
[ 8.185376] usb 4-2: adding 4-2:1.0 (config #1, interface 0)
[ 8.185566] hub 4-2:1.0: usb_probe_interface
[ 8.185570] hub 4-2:1.0: usb_probe_interface - got id
[ 8.185572] hub 4-2:1.0: USB hub found
[ 8.190380] hub 4-2:1.0: 4 ports detected
[ 8.194692] hub 4-2:1.0: standalone hub
[ 8.194695] hub 4-2:1.0: individual port power switching
[ 8.194698] hub 4-2:1.0: individual port over-current protection
[ 8.194701] hub 4-2:1.0: TT requires at most 32 FS bit times (2664 ns)
[ 8.194704] hub 4-2:1.0: Port indicators are supported
[ 8.194706] hub 4-2:1.0: power on to power good time: 100ms
[ 8.197372] hub 4-2:1.0: local power source is good
[ 8.197378] hub 4-2:1.0: enabling power on all ports
[ 8.205648] drivers/usb/core/inode.c: creating file '003'
[ 8.205705] hub 5-0:1.0: state 7 ports 2 chg 0006 evt 0000
[ 8.205718] hub 5-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 8.267035] ohci_hcd 0000:00:13.4: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
[ 8.311378] hub 4-2:1.0: port 4: status 0101 change 0001
[ 8.318029] usb 5-1: new full speed USB device using ohci_hcd and address 2
[ 8.388029] ohci_hcd 0000:00:13.4: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
[ 8.458373] usb 5-1: default language 0x0409
[ 8.460377] usb 5-1: udev 2, busnum 5, minor = 513
[ 8.460380] usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
[ 8.467461] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 8.475116] usb 5-1: Product: USB2.0 Hub
[ 8.479674] usb 5-1: usb_probe_device
[ 8.479679] usb 5-1: configuration #1 chosen from 1 choice
[ 8.480378] usb 5-1: adding 5-1:1.0 (config #1, interface 0)
[ 8.480569] hub 5-1:1.0: usb_probe_interface
[ 8.480573] hub 5-1:1.0: usb_probe_interface - got id
[ 8.480575] hub 5-1:1.0: USB hub found
[ 8.485383] hub 5-1:1.0: 4 ports detected
[ 8.489669] hub 5-1:1.0: standalone hub
[ 8.489671] hub 5-1:1.0: individual port power switching
[ 8.489674] hub 5-1:1.0: individual port over-current protection
[ 8.489677] hub 5-1:1.0: TT requires at most 32 FS bit times (2664 ns)
[ 8.489680] hub 5-1:1.0: Port indicators are supported
[ 8.489682] hub 5-1:1.0: power on to power good time: 100ms
[ 8.492373] hub 5-1:1.0: local power source is good
[ 8.492379] hub 5-1:1.0: enabling power on all ports
[ 8.500660] drivers/usb/core/inode.c: creating file '002'
[ 8.500722] hub 5-0:1.0: port 2, status 0101, change 0000, 12 Mb/s
[ 8.562039] ohci_hcd 0000:00:13.4: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
[ 8.606377] hub 5-1:1.0: port 4: status 0101 change 0001
[ 8.613036] usb 5-2: new full speed USB device using ohci_hcd and address 3
[ 8.675281] ohci_hcd 0000:00:13.4: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
[ 8.739022] usb 5-2: ep0 maxpacket = 8
[ 8.745380] usb 5-2: default language 0x0409
[ 8.747382] usb 5-2: udev 3, busnum 5, minor = 514
[ 8.747385] usb 5-2: New USB device found, idVendor=4348, idProduct=5523
[ 8.747389] usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 8.747392] usb 5-2: Product: USB-SER!
[ 8.747768] usb 5-2: usb_probe_device
[ 8.747772] usb 5-2: configuration #1 chosen from 1 choice
[ 8.749380] usb 5-2: adding 5-2:1.0 (config #1, interface 0)
[ 8.750640] drivers/usb/core/inode.c: creating file '003'
[ 8.750698] hub 1-1:1.0: state 7 ports 4 chg 0010 evt 0000
[ 8.751427] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
[ 8.817416] usb 1-1.4: new full speed USB device using ohci_hcd and address 4
[ 8.905422] usb 1-1.4: default language 0x0409
[ 8.909421] usb 1-1.4: udev 4, busnum 1, minor = 3
[ 8.909425] usb 1-1.4: New USB device found, idVendor=12d1, idProduct=1003
[ 8.909428] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.909431] usb 1-1.4: Product: HUAWEI Mobile
[ 8.909434] usb 1-1.4: Manufacturer: HUAWEI Technologies
[ 8.909807] usb 1-1.4: usb_probe_device
[ 8.909812] usb 1-1.4: configuration #1 chosen from 1 choice
[ 8.911424] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0)
[ 8.913611] usb-storage 1-1.4:1.0: usb_probe_interface
[ 8.913616] usb-storage 1-1.4:1.0: usb_probe_interface - got id
[ 8.913943] usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1)
[ 8.915576] usb-storage 1-1.4:1.1: usb_probe_interface
[ 8.915581] usb-storage 1-1.4:1.1: usb_probe_interface - got id
[ 8.916471] usb 1-1.4: adding 1-1.4:1.2 (config #1, interface 2)
[ 8.916712] usb-storage 1-1.4:1.2: usb_probe_interface
[ 8.916717] usb-storage 1-1.4:1.2: usb_probe_interface - got id
[ 8.919511] scsi8 : usb-storage 1-1.4:1.2
[ 8.920005] drivers/usb/core/inode.c: creating file '004'
[ 8.920049] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 8.920065] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 8.920075] hub 3-1:1.0: state 7 ports 3 chg 0002 evt 0000
[ 8.920798] hub 3-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 8.984801] usb 3-1.1: new full speed USB device using ohci_hcd and address 4
[ 9.069808] usb 3-1.1: skipped 1 descriptor after interface
[ 9.071792] usb 3-1.1: default language 0x0409
[ 9.075794] usb 3-1.1: udev 4, busnum 3, minor = 259
[ 9.075797] usb 3-1.1: New USB device found, idVendor=0a5c, idProduct=2039
[ 9.075800] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.075803] usb 3-1.1: Product: BCM92045B3 ROM
[ 9.075806] usb 3-1.1: Manufacturer: Broadcom Corp
[ 9.075998] usb 3-1.1: usb_probe_device
[ 9.076002] usb 3-1.1: configuration #1 chosen from 1 choice
[ 9.077806] usb 3-1.1: adding 3-1.1:1.0 (config #1, interface 0)
[ 9.077934] usb 3-1.1: adding 3-1.1:1.1 (config #1, interface 1)
[ 9.078028] usb 3-1.1: adding 3-1.1:1.2 (config #1, interface 2)
[ 9.078124] usb 3-1.1: adding 3-1.1:1.3 (config #1, interface 3)
[ 9.078215] drivers/usb/core/inode.c: creating file '004'
[ 9.078267] hub 3-1:1.0: 300mA power budget left
[ 9.078273] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 9.078286] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 9.078297] hub 4-2:1.0: state 7 ports 4 chg 0010 evt 0000
[ 9.079383] hub 4-2:1.0: port 4, status 0101, change 0000, 12 Mb/s
[ 9.146395] usb 4-2.4: new full speed USB device using ohci_hcd and address 4
[ 9.235390] usb 4-2.4: default language 0x0409
[ 9.239388] usb 4-2.4: udev 4, busnum 4, minor = 387
[ 9.239391] usb 4-2.4: New USB device found, idVendor=12d1, idProduct=1003
[ 9.239395] usb 4-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.239398] usb 4-2.4: Product: HUAWEI Mobile
[ 9.239401] usb 4-2.4: Manufacturer: HUAWEI Technologies
[ 9.239667] usb 4-2.4: usb_probe_device
[ 9.239672] usb 4-2.4: configuration #1 chosen from 1 choice
[ 9.241397] usb 4-2.4: adding 4-2.4:1.0 (config #1, interface 0)
[ 9.243424] usb-storage 4-2.4:1.0: usb_probe_interface
[ 9.243429] usb-storage 4-2.4:1.0: usb_probe_interface - got id
[ 9.243641] usb 4-2.4: adding 4-2.4:1.1 (config #1, interface 1)
[ 9.245418] usb-storage 4-2.4:1.1: usb_probe_interface
[ 9.245423] usb-storage 4-2.4:1.1: usb_probe_interface - got id
[ 9.245561] usb 4-2.4: adding 4-2.4:1.2 (config #1, interface 2)
[ 9.245628] usb-storage 4-2.4:1.2: usb_probe_interface
[ 9.245633] usb-storage 4-2.4:1.2: usb_probe_interface - got id
[ 9.247424] scsi11 : usb-storage 4-2.4:1.2
[ 9.247659] drivers/usb/core/inode.c: creating file '004'
[ 9.247701] hub 5-1:1.0: state 7 ports 4 chg 0010 evt 0000
[ 9.248386] hub 5-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
[ 9.316391] usb 5-1.4: new full speed USB device using ohci_hcd and address 4
[ 9.399287] usb 5-1.4: ep0 maxpacket = 8
[ 9.406514] usb 5-1.4: default language 0x0409
[ 9.408574] usb 5-1.4: udev 4, busnum 5, minor = 515
[ 9.408579] usb 5-1.4: New USB device found, idVendor=4348, idProduct=5523
[ 9.408582] usb 5-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 9.408585] usb 5-1.4: Product: USB-SER!
[ 9.408835] usb 5-1.4: usb_probe_device
[ 9.408840] usb 5-1.4: configuration #1 chosen from 1 choice
[ 9.410448] usb 5-1.4: adding 5-1.4:1.0 (config #1, interface 0)
[ 9.410670] drivers/usb/core/inode.c: creating file '004'
[ 9.410727] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0010
[ 9.415269] hub 3-1:1.0: state 7 ports 3 chg 0000 evt 0002
[ 9.415802] hub 4-2:1.0: state 7 ports 4 chg 0000 evt 0010
[ 9.416387] hub 5-1:1.0: state 7 ports 4 chg 0000 evt 0010
[ 9.477401] calling usb_serial_init+0x0/0x1d0 [usbserial] @ 1297
[ 9.478329] usbcore: registered new interface driver usbserial
[ 9.478591] USB Serial support registered for generic
[ 9.478624] usbserial_generic 2-1:1.0: usb_probe_interface
[ 9.478627] usbserial_generic 2-1:1.0: usb_probe_interface - got id
[ 9.478660] usbserial_generic 3-2:1.0: usb_probe_interface
[ 9.478663] usbserial_generic 3-2:1.0: usb_probe_interface - got id
[ 9.478678] usbserial_generic 4-1:1.0: usb_probe_interface
[ 9.478681] usbserial_generic 4-1:1.0: usb_probe_interface - got id
[ 9.478700] usbserial_generic 5-2:1.0: usb_probe_interface
[ 9.478703] usbserial_generic 5-2:1.0: usb_probe_interface - got id
[ 9.478718] usbserial_generic 1-1.4:1.0: usb_probe_interface
[ 9.478721] usbserial_generic 1-1.4:1.0: usb_probe_interface - got id
[ 9.478735] usbserial_generic 1-1.4:1.1: usb_probe_interface
[ 9.478738] usbserial_generic 1-1.4:1.1: usb_probe_interface - got id
[ 9.478754] usbserial_generic 3-1.1:1.0: usb_probe_interface
[ 9.478757] usbserial_generic 3-1.1:1.0: usb_probe_interface - got id
[ 9.478771] usbserial_generic 3-1.1:1.1: usb_probe_interface
[ 9.478774] usbserial_generic 3-1.1:1.1: usb_probe_interface - got id
[ 9.478788] usbserial_generic 3-1.1:1.2: usb_probe_interface
[ 9.478790] usbserial_generic 3-1.1:1.2: usb_probe_interface - got id
[ 9.478804] usbserial_generic 3-1.1:1.3: usb_probe_interface
[ 9.478806] usbserial_generic 3-1.1:1.3: usb_probe_interface - got id
[ 9.478821] usbserial_generic 4-2.4:1.0: usb_probe_interface
[ 9.478824] usbserial_generic 4-2.4:1.0: usb_probe_interface - got id
[ 9.478839] usbserial_generic 4-2.4:1.1: usb_probe_interface
[ 9.478841] usbserial_generic 4-2.4:1.1: usb_probe_interface - got id
[ 9.478857] usbserial_generic 5-1.4:1.0: usb_probe_interface
[ 9.478860] usbserial_generic 5-1.4:1.0: usb_probe_interface - got id
[ 9.479286] usbcore: registered new interface driver usbserial_generic
[ 9.479289] usbserial: USB Serial Driver core
[ 9.479300] initcall usb_serial_init+0x0/0x1d0 [usbserial] returned 0 after 1842 usecs
[ 9.503208] calling option_init+0x0/0x4c [option] @ 1296
[ 9.503691] USB Serial support registered for GSM modem (1-port)
[ 9.503927] option 1-1.4:1.0: usb_probe_interface
[ 9.503931] option 1-1.4:1.0: usb_probe_interface - got id
[ 9.503941] option 1-1.4:1.0: GSM modem (1-port) converter detected
[ 9.505023] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB0
[ 9.505044] option 1-1.4:1.1: usb_probe_interface
[ 9.505048] option 1-1.4:1.1: usb_probe_interface - got id
[ 9.505054] option 1-1.4:1.1: GSM modem (1-port) converter detected
[ 9.505266] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB1
[ 9.505325] option 4-2.4:1.0: usb_probe_interface
[ 9.505329] option 4-2.4:1.0: usb_probe_interface - got id
[ 9.505339] option 4-2.4:1.0: GSM modem (1-port) converter detected
[ 9.505621] usb 4-2.4: GSM modem (1-port) converter now attached to ttyUSB2
[ 9.505635] option 4-2.4:1.1: usb_probe_interface
[ 9.505639] option 4-2.4:1.1: usb_probe_interface - got id
[ 9.505644] option 4-2.4:1.1: GSM modem (1-port) converter detected
[ 9.505785] usb 4-2.4: GSM modem (1-port) converter now attached to ttyUSB3
[ 9.505827] usbcore: registered new interface driver option
[ 9.505829] option: v0.7.2:USB Driver for GSM modems
[ 9.505843] initcall option_init+0x0/0x4c [option] returned 0 after 2559 usecs
[ 9.507266] calling ch341_init+0x0/0x3d [ch341] @ 1354
[ 9.507304] USB Serial support registered for ch341-uart
[ 9.507337] ch341 4-1:1.0: usb_probe_interface
[ 9.507340] ch341 4-1:1.0: usb_probe_interface - got id
[ 9.507345] ch341 4-1:1.0: ch341-uart converter detected
[ 9.533771] usb 4-1: ch341-uart converter now attached to ttyUSB4
[ 9.533794] ch341 5-2:1.0: usb_probe_interface
[ 9.533797] ch341 5-2:1.0: usb_probe_interface - got id
[ 9.533805] ch341 5-2:1.0: ch341-uart converter detected
[ 9.556597] usb 5-2: ch341-uart converter now attached to ttyUSB5
[ 9.556627] ch341 5-1.4:1.0: usb_probe_interface
[ 9.556630] ch341 5-1.4:1.0: usb_probe_interface - got id
[ 9.556636] ch341 5-1.4:1.0: ch341-uart converter detected
[ 9.580678] usb 5-1.4: ch341-uart converter now attached to ttyUSB6
[ 9.580712] usbcore: registered new interface driver ch341
[ 9.580722] initcall ch341_init+0x0/0x3d [ch341] returned 0 after 71724 usecs
[ 9.610497] udev: renamed network interface eth0 to re0
[ 9.925502] scsi 8:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 9.925808] scsi 8:0:0:0: Attached scsi generic sg2 type 5
[ 10.253450] scsi 11:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 10.253762] scsi 11:0:0:0: Attached scsi generic sg3 type 5
[ 10.374382] calling ftdi_init+0x0/0xb6 [ftdi_sio] @ 2534
[ 10.374427] USB Serial support registered for FTDI USB Serial Device
[ 10.374513] ftdi_sio 3-2:1.0: usb_probe_interface
[ 10.374516] ftdi_sio 3-2:1.0: usb_probe_interface - got id
[ 10.374524] ftdi_sio 3-2:1.0: FTDI USB Serial Device converter detected
[ 10.374583] usb 3-2: Detected FT232BM
[ 10.374586] usb 3-2: Number of endpoints 2
[ 10.374588] usb 3-2: Endpoint 1 MaxPacketSize 64
[ 10.374591] usb 3-2: Endpoint 2 MaxPacketSize 64
[ 10.374593] usb 3-2: Setting MaxPacketSize 64
[ 10.387298] usb 3-2: FTDI USB Serial Device converter now attached to ttyUSB7
[ 10.387430] usbcore: registered new interface driver ftdi_sio
[ 10.387433] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[ 10.387449] initcall ftdi_init+0x0/0xb6 [ftdi_sio] returned 0 after 12743 usecs
[ 10.390333] calling usbatm_usb_init+0x0/0x40 [usbatm] @ 2528
[ 10.390342] initcall usbatm_usb_init+0x0/0x40 [usbatm] returned 0 after 0 usecs
[ 10.402959] calling cxacru_init+0x0/0x19 [cxacru] @ 2528
[ 10.402993] cxacru 2-1:1.0: usb_probe_interface
[ 10.402996] cxacru 2-1:1.0: usb_probe_interface - got id
[ 10.456230] calling bt_init+0x0/0x50 [bluetooth] @ 2531
[ 10.456236] Bluetooth: Core ver 2.15
[ 10.456411] NET: Registered protocol family 31
[ 10.456414] Bluetooth: HCI device and connection manager initialized
[ 10.456516] Bluetooth: HCI socket layer initialized
[ 10.456526] initcall bt_init+0x0/0x50 [bluetooth] returned 0 after 276 usecs
[ 10.472632] calling btusb_init+0x0/0x28 [btusb] @ 2536
[ 10.472637] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 10.472682] btusb 3-1.1:1.0: usb_probe_interface
[ 10.472686] btusb 3-1.1:1.0: usb_probe_interface - got id
[ 10.482336] btusb 3-1.1:1.2: usb_probe_interface
[ 10.482341] btusb 3-1.1:1.2: usb_probe_interface - got id
[ 10.482358] btusb 3-1.1:1.3: usb_probe_interface
[ 10.482361] btusb 3-1.1:1.3: usb_probe_interface - got id
[ 10.482401] usbcore: registered new interface driver btusb
[ 10.482411] initcall btusb_init+0x0/0x28 [btusb] returned 0 after 9540 usecs
[ 10.501532] cxacru0: ADSL USB MODEM (usb-0000:00:13.1-1) 00:05:b4:12:05:30
[ 10.501775] calling e1000_init_module+0x0/0x71 [e1000] @ 2603
[ 10.501780] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-NAPI
[ 10.501783] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 10.501857] e1000 0000:02:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 10.535811] ATM dev 0: ADSL state: running
[ 10.535816] ATM dev 0: ADSL line: up (8128 kb/s down | 832 kb/s up)
[ 10.536070] usbcore: registered new interface driver cxacru
[ 10.536081] initcall cxacru_init+0x0/0x19 [cxacru] returned 0 after 129990 usecs
[ 10.801390] e1000 0000:02:07.0: eth0: (PCI:33MHz:32-bit) 00:04:23:a8:25:f0
[ 10.801581] e1000 0000:02:07.0: eth0: Intel(R) PRO/1000 Network Connection
[ 10.801617] e1000 0000:02:07.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 11.099268] e1000 0000:02:07.1: eth1: (PCI:33MHz:32-bit) 00:04:23:a8:25:f1
[ 11.099272] e1000 0000:02:07.1: eth1: Intel(R) PRO/1000 Network Connection
[ 11.099313] initcall e1000_init_module+0x0/0x71 [e1000] returned 0 after 583520 usecs
[ 11.105180] udev: renamed network interface eth1 to em1
[ 11.109430] udev: renamed network interface eth0 to em0
[ 11.825034] EXT3-fs (md0): using internal journal
[ 12.743479] EXT3-fs: barriers not enabled
[ 12.752551] kjournald starting. Commit interval 5 seconds
[ 12.752771] EXT3-fs (sda1): using internal journal
[ 12.752782] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 12.756934] EXT3-fs: barriers not enabled
[ 12.757096] kjournald starting. Commit interval 5 seconds
[ 12.757308] EXT3-fs (sdb1): using internal journal
[ 12.757317] EXT3-fs (sdb1): mounted filesystem with ordered data mode
[ 12.823409] Adding 1060284k swap on /dev/sda2. Priority:-1 extents:1 across:1060284k
[ 12.840170] Adding 1060284k swap on /dev/sdb2. Priority:-2 extents:1 across:1060284k
[ 14.877252] calling ifb_init_module+0x0/0x9a [ifb] @ 2842
[ 14.878928] initcall ifb_init_module+0x0/0x9a [ifb] returned 0 after 1618 usecs
[ 14.902377] calling teql_init+0x0/0xc3 [sch_teql] @ 2847
[ 14.904074] initcall teql_init+0x0/0xc3 [sch_teql] returned 0 after 1650 usecs
[ 14.918894] calling dummy_init_module+0x0/0x95 [dummy] @ 2872
[ 14.919184] initcall dummy_init_module+0x0/0x95 [dummy] returned 0 after 275 usecs
[ 14.957702] calling ppp_init+0x0/0xc8 [ppp_generic] @ 2901
[ 14.957708] PPP generic driver version 2.4.2
[ 14.957939] initcall ppp_init+0x0/0xc8 [ppp_generic] returned 0 after 222 usecsAttachment:
config
Description: Binary data