Re: [PATCH 0/8] sdhci: Move real work out of an atomic context

[Anton Vorontsov]

On Wed, Sep 08, 2010 at 11:05:48PM +0100, Chris Ball wrote:
> Hi Anton,
> 
> On Thu, Sep 09, 2010 at 01:57:50AM +0400, Anton Vorontsov wrote:
> > Thanks!
> > 
> > Would be also great if you could point out which patch causes
> > most of the performance drop (if any)?
> > 
> > Albert, if you could find time, can you also "bisect" the
> > patchset? I wouldn't want to buy Nintendo WII just to debug the
> > perf regression. ;-) FWIW, I tried to disable multiblock
> > read/writes and test with SD cards, and still didn't notice
> > any performance drops.
> > 
> > Maybe it's SDIO IRQs that cause the performance drop for the
> > WII case, as we delay them a little bit? Or it could be the
> > patch that introduces threaded IRQ handler in whole causes
> > it. If so, I guess we'd need to move some of the processing to
> > the real IRQ context, keeping the handler lockless (if
> > possible) or introducing a very fine grained locking.
> 
> I didn't know anything about a reported performance drop, and I don't
> think Andrew did either -- Albert's test results don't seem to have
> made it to this list, or anywhere else that I can see.  Could you 
> link to/repost his comments?
> 
> (I'll be testing with libertas, so that will stress-test SDIO IRQs.)

Sure thing, here are Albert's results.

----- Forwarded message from Albert Herranz <albert_herranz@xxxxxxxx> -----

Date: Mon, 02 Aug 2010 21:23:51 +0200
From: Albert Herranz <albert_herranz@xxxxxxxx>
To: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
CC: akpm@xxxxxxxxxxxxxxxxxxxx, mm-commits@xxxxxxxxxxxxxxx,
	ben-linux@xxxxxxxxx, matt@xxxxxxxxxxxxxxxxx, pierre@xxxxxxxxx,
	w.sang@xxxxxxxxxxxxxx, mb@xxxxxxxxx
Subject: Re: + sdhci-use-work-structs-instead-of-tasklets.patch added to -mm
	tree

Hi,

Some initial numbers regarding performance. The patchset seems to cause a noticeable performance drop.
I've run two iperf client tests (see the two invocations of iperf -c) and two iperf server tests (see iperf -s invocation).

== 2.6.33 ==

$ iperf -c 192.168.1.130 
------------------------------------------------------------
Client connecting to 192.168.1.130, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[  3] local 192.168.1.127 port 40119 connected with 192.168.1.130 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-10.1 sec  1.05 MBytes    872 Kbits/sec

$ iperf -c 192.168.1.130 
------------------------------------------------------------
Client connecting to 192.168.1.130, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[  3] local 192.168.1.127 port 40120 connected with 192.168.1.130 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-10.0 sec  1.04 MBytes    870 Kbits/sec

$ iperf -s
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
[  4] local 192.168.1.127 port 5001 connected with 192.168.1.130 port 36691
[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-10.2 sec  3.61 MBytes  2.98 Mbits/sec
[  5] local 192.168.1.127 port 5001 connected with 192.168.1.130 port 36692
[  5]  0.0-10.1 sec  4.94 MBytes  4.09 Mbits/sec


== 2.6.33 + "sdhci: Move real work out of an atomic context" patchset ==

$ iperf -c 192.168.1.130 
------------------------------------------------------------
Client connecting to 192.168.1.130, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[  3] local 192.168.1.127 port 39210 connected with 192.168.1.130 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-10.0 sec    368 KBytes    301 Kbits/sec

$ iperf -c 192.168.1.130 
------------------------------------------------------------
Client connecting to 192.168.1.130, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[  3] local 192.168.1.127 port 39211 connected with 192.168.1.130 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-10.2 sec    440 KBytes    354 Kbits/sec

$ iperf -s
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
[  4] local 192.168.1.127 port 5001 connected with 192.168.1.130 port 57833
[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-10.2 sec  2.37 MBytes  1.95 Mbits/sec
[  5] local 192.168.1.127 port 5001 connected with 192.168.1.130 port 57834
[  5]  0.0-10.2 sec  2.30 MBytes  1.90 Mbits/sec

The subjective feeling is too that the system is slower.

Cheers,
Albert

----- End forwarded message -----
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/