[PATCH v2] regulators: add support max8952 regulator
From: Kukjin Kim
Date: Tue Sep 07 2010 - 03:42:07 EST
From: Changhwan Youn <chaos.youn@xxxxxxxxxxx>
The operation of max8952 is almost similar to max8649 except
the output voltage range. This patch adds support the max8952
regulator using current max8649 implementation.
Signed-off-by: Changhwan Youn <chaos.youn@xxxxxxxxxxx>
Signed-off-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
Cc: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
---
Changes since v1:
Following is as per Mark Brown's suggestion.
- Added returning fail when detected wrong ID
- Added matching the ID from the chip in case the user got things wrong
- Added enum chip ID instead of 0, 1
Mark Brown, Thanks
NOTE: Following is test log
1) In the case of success
s3c-i2c s3c2410-i2c.0: slave address 0x10
s3c-i2c s3c2410-i2c.0: bus frequency set to 97 KHz
max8649 0-0060: Detected max8952 (ID: 0x201a)
regulator: vdd_arm range: 770 <--> 1400 mV at 1100 mV
max8649 0-0060: max8952 regulator device is detected.
max8649 0-0062: Detected max8649 (ID: 0x200a)
regulator: vdd_g3d range: 750 <--> 1380 mV at 1230 mV
max8649 0-0062: max8649 regulator device is detected.
s3c-i2c s3c2410-i2c.0: i2c-0: S3C I2C adapter
s3c-i2c s3c2410-i2c.1: slave address 0x10
s3c-i2c s3c2410-i2c.1: bus frequency set to 97 KHz
max8649 1-0060: Detected max8649 (ID: 0x200a)
regulator: vdd_int range: 750 <--> 1380 mV at 1230 mV
max8649 1-0060: max8649 regulator device is detected.
s3c-i2c s3c2410-i2c.1: i2c-1: S3C I2C adapter
2) In the case of fail
s3c-i2c s3c2410-i2c.0: slave address 0x10
s3c-i2c s3c2410-i2c.0: bus frequency set to 97 KHz
max8649 0-0060: Failed to detect the device
requested : 0x200a, detected 0x201a
max8649 0-0062: Detected max8649 (ID: 0x200a)
regulator: vdd_g3d range: 750 <--> 1380 mV at 1230 mV
max8649 0-0062: max8649 regulator device is detected.
s3c-i2c s3c2410-i2c.0: i2c-0: S3C I2C adapter
s3c-i2c s3c2410-i2c.1: slave address 0x10
s3c-i2c s3c2410-i2c.1: bus frequency set to 97 KHz
max8649 1-0060: Failed to detect the device
requested : 0x201a, detected 0x200a
s3c-i2c s3c2410-i2c.1: i2c-1: S3C I2C adapter
drivers/regulator/Kconfig | 4 +-
drivers/regulator/max8649.c | 55 +++++++++++++++++++++++++++++++++++++-----
2 files changed, 50 insertions(+), 9 deletions(-)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 172951b..fab9a90 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -81,10 +81,10 @@ config REGULATOR_MAX1586
for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
config REGULATOR_MAX8649
- tristate "Maxim 8649 voltage regulator"
+ tristate "Maxim 8649/8952 voltage regulator"
depends on I2C
help
- This driver controls a Maxim 8649 voltage output regulator via
+ This driver controls a Maxim 8649/8952 voltage output regulator via
I2C bus.
config REGULATOR_MAX8660
diff --git a/drivers/regulator/max8649.c b/drivers/regulator/max8649.c
index 4520ace..7f61a3a 100644
--- a/drivers/regulator/max8649.c
+++ b/drivers/regulator/max8649.c
@@ -22,6 +22,9 @@
#define MAX8649_DCDC_STEP 10000 /* uV */
#define MAX8649_VOL_MASK 0x3f
+/* difference between voltages of max8649 and max8952 */
+#define DIFF_MAX8952_DCDC_VOL 20000 /* uV */
+
/* Registers */
#define MAX8649_MODE0 0x00
#define MAX8649_MODE1 0x01
@@ -47,6 +50,11 @@
#define MAX8649_RAMP_MASK (7 << 5)
#define MAX8649_RAMP_DOWN (1 << 1)
+enum chips {
+ MAX8649 = 0x200a,
+ MAX8952 = 0x201a,
+};
+
struct max8649_regulator_info {
struct regulator_dev *regulator;
struct i2c_client *i2c;
@@ -54,6 +62,7 @@ struct max8649_regulator_info {
struct mutex io_lock;
int vol_reg;
+ int type;
unsigned mode:2; /* bit[1:0] = VID1, VID0 */
unsigned extclk_freq:2;
unsigned extclk:1;
@@ -138,7 +147,12 @@ static inline int check_range(int min_uV, int max_uV)
static int max8649_list_voltage(struct regulator_dev *rdev, unsigned index)
{
- return (MAX8649_DCDC_VMIN + index * MAX8649_DCDC_STEP);
+ struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
+ int ret = MAX8649_DCDC_VMIN + index * MAX8649_DCDC_STEP;
+
+ if (info->type == MAX8952)
+ ret += DIFF_MAX8952_DCDC_VOL;
+ return ret;
}
static int max8649_get_voltage(struct regulator_dev *rdev)
@@ -160,6 +174,11 @@ static int max8649_set_voltage(struct regulator_dev *rdev,
struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
unsigned char data, mask;
+ if (info->type == MAX8952) {
+ min_uV -= DIFF_MAX8952_DCDC_VOL;
+ max_uV -= DIFF_MAX8952_DCDC_VOL;
+ }
+
if (check_range(min_uV, max_uV)) {
dev_err(info->dev, "invalid voltage range (%d, %d) uV\n",
min_uV, max_uV);
@@ -263,7 +282,6 @@ static struct regulator_ops max8649_dcdc_ops = {
.enable_time = max8649_enable_time,
.set_mode = max8649_set_mode,
.get_mode = max8649_get_mode,
-
};
static struct regulator_desc dcdc_desc = {
@@ -281,6 +299,7 @@ static int __devinit max8649_regulator_probe(struct i2c_client *client,
struct max8649_regulator_info *info = NULL;
unsigned char data;
int ret;
+ int chip_id;
info = kzalloc(sizeof(struct max8649_regulator_info), GFP_KERNEL);
if (!info) {
@@ -313,11 +332,32 @@ static int __devinit max8649_regulator_probe(struct i2c_client *client,
ret = max8649_reg_read(info->i2c, MAX8649_CHIP_ID1);
if (ret < 0) {
- dev_err(info->dev, "Failed to detect ID of MAX8649:%d\n",
- ret);
+ dev_err(info->dev, "Failed to detect ID1 of %s:%d\n",
+ id->name, ret);
goto out;
}
- dev_info(info->dev, "Detected MAX8649 (ID:%x)\n", ret);
+ chip_id = ret;
+
+ ret = max8649_reg_read(info->i2c, MAX8649_CHIP_ID2);
+ if (ret < 0) {
+ dev_err(info->dev, "Failed to detect ID2 of %s:%d\n",
+ id->name, ret);
+ goto out;
+ }
+
+ chip_id = (chip_id << 8) | ret;
+
+ if (id->driver_data != chip_id) {
+ dev_err(info->dev, "Failed to detect the device\n"
+ "requested : 0x%x, detected 0x%x\n",
+ id->driver_data, chip_id);
+ ret = -ENODEV;
+ goto out;
+ }
+
+ dev_info(info->dev, "Detected %s (ID: 0x%x)\n", id->name, chip_id);
+
+ info->type = id->driver_data;
/* enable VID0 & VID1 */
max8649_set_bits(info->i2c, MAX8649_CONTROL, MAX8649_VID_MASK, 0);
@@ -354,7 +394,7 @@ static int __devinit max8649_regulator_probe(struct i2c_client *client,
goto out;
}
- dev_info(info->dev, "Max8649 regulator device is detected.\n");
+ dev_info(info->dev, "%s regulator device is detected.\n", id->name);
return 0;
out:
kfree(info);
@@ -375,7 +415,8 @@ static int __devexit max8649_regulator_remove(struct i2c_client *client)
}
static const struct i2c_device_id max8649_id[] = {
- { "max8649", 0 },
+ { "max8649", MAX8649 },
+ { "max8952", MAX8952 },
{ }
};
MODULE_DEVICE_TABLE(i2c, max8649_id);
--
1.6.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/