Re: [PATCH 0/1] input: keyboard: add qci keyboard driver
From: Dmitry Torokhov
Date: Fri Sep 03 2010 - 16:37:45 EST
Hi Neil,
On Fri, Sep 03, 2010 at 03:13:10PM -0400, Neil Leeder wrote:
> On 9/1/2010 2:34 AM, Dmitry Torokhov wrote:
> >
> >OK, I give up on pursuit of serio solution. Again ;)
>
> Dmitry,
>
> Don't give up yet... I've been talking to Quanta and they are using
> a different EC in their new products, which should have better
> firmware support for serio over i2c.
This is great!
> When I get the new hardware I
> will try again to overcome the issues that showed up on the previous
> firmware, and I'll submit new patches for both touchpad and
> keyboard.
>
Does this mean you are not interested in getting drivers for the current
generation of hardware to mainline?
Otherwise, please take a glance at these patches (I did some
renaming/reformatting) and let me know if I broke them. The main
question is whether 0xF5 works for shutting off the keyboard and the
touchpad - I rather dislike that the drivers are asymmetrical in sense
that they implement open() methods but not close().
Thanks.
--
Dmitry
Input: add qci keyboard driver
From: Neil Leeder <nleeder@xxxxxxxxxxxxxx>
This driver is for the QCI i2c keyboard used on Quanta smartbooks.
Signed-off-by: Horace Fu <horace.fu@xxxxxxxxxxxx>
[nleeder@xxxxxxxxxxxxxx: cleanup to latest kernel standards]
Signed-off-by: Neil Leeder <nleeder@xxxxxxxxxxxxxx>
Signed-off-by: Dmitry Torokhov <dtor@xxxxxxx>
---
drivers/input/keyboard/Kconfig | 12 ++
drivers/input/keyboard/Makefile | 1
drivers/input/keyboard/qci_gkbd.c | 259 ++++++++++++++++++++++++++++++++++++
include/linux/input/qci_keyboard.h | 25 +++
4 files changed, 297 insertions(+), 0 deletions(-)
create mode 100644 drivers/input/keyboard/qci_gkbd.c
create mode 100644 include/linux/input/qci_keyboard.h
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index d63f566..2f38feb 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -373,6 +373,18 @@ config KEYBOARD_SAMSUNG
To compile this driver as a module, choose M here: the
module will be called samsung-keypad.
+config KEYBOARD_QCIGKBD
+ tristate "Quanta Computer Inc. keyboard"
+ depends on I2C
+ help
+ This driver supports the i2c keyboard on Quanta smartbook devices.
+
+ Say Y here if you have a Quanta-based smartbook or notepad
+ device and want to use the Quanta i2c keyboard driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called qci_gkbd.
+
config KEYBOARD_STOWAWAY
tristate "Stowaway keyboard"
select SERIO
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index c13809c..82f69f7 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_KEYBOARD_OMAP4) += omap4-keypad.o
obj-$(CONFIG_KEYBOARD_OPENCORES) += opencores-kbd.o
obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o
obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o
+obj-$(CONFIG_KEYBOARD_QCIGKBD) += qci_gkbd.o
obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o
obj-$(CONFIG_KEYBOARD_SAMSUNG) += samsung-keypad.o
obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o
diff --git a/drivers/input/keyboard/qci_gkbd.c b/drivers/input/keyboard/qci_gkbd.c
new file mode 100644
index 0000000..6cc06c4
--- /dev/null
+++ b/drivers/input/keyboard/qci_gkbd.c
@@ -0,0 +1,259 @@
+/* Quanta I2C Keyboard Driver
+ *
+ * Copyright (C) 2009 Quanta Computer Inc.
+ * Author: Hsin Wu <hsin.wu@xxxxxxxxxxxx>
+ * Author: Austin Lai <austin.lai@xxxxxxxxxxxx>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+/*
+ * This driver communicates via I2C to the nuvoTon WPCE775x Embedded
+ * Controller, which has the keyboard attached to it.
+ *
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/keyboard.h>
+#include <linux/gpio.h>
+#include <linux/input/qci_keyboard.h>
+
+#define QCI_KEYBOARD_ID_NAME "qci-gkbd"
+#define QCI_KEYBOARD_NAME "Quanta Keyboard"
+#define QCI_KEYBOARD_DEVICE "/qci-gkbd/input0"
+#define QCI_KEYBOARD_CMD_ENABLE 0xF4
+#define QCI_KEYBOARD_CMD_DISABLE 0xF5
+#define QCI_KEYBOARD_ACK 0xFA
+#define QCI_KEYBOARD_MAX_KEY 127
+
+struct qci_keyboard {
+ struct i2c_client *client;
+ struct input_dev *input;
+ unsigned int gpio;
+ unsigned int irq;
+};
+
+#ifdef CONFIG_PM
+static int qcikbd_suspend(struct device *dev)
+{
+ struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+ struct qci_keyboard *qcikbd = i2c_get_clientdata(client);
+
+ disable_irq(qcikbd->irq);
+
+ return 0;
+}
+
+static int qcikbd_resume(struct device *dev)
+{
+ struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+ struct qci_keyboard *qcikbd = i2c_get_clientdata(client);
+
+ enable_irq(qcikbd->irq);
+
+ return 0;
+}
+
+static const struct dev_pm_ops qcikbd_pm_ops = {
+ .suspend = qcikbd_suspend,
+ .resume = qcikbd_resume,
+};
+#endif
+
+static irqreturn_t qcikbd_interrupt(int irq, void *dev_id)
+{
+ struct qci_keyboard *qcikbd = dev_id;
+ struct input_dev *input = qcikbd->input;
+ int rc;
+ unsigned int scancode;
+ unsigned char data;
+ bool down;
+
+ rc = i2c_master_recv(qcikbd->client, &data, 1);
+ if (rc != 1)
+ goto irq_exit;
+
+ if (data == QCI_KEYBOARD_ACK)
+ goto irq_exit;
+
+ scancode = data & 0x7f;
+ down = !(data & 0x80);
+
+ if (scancode) {
+ input_event(input, EV_MSC, MSC_SCAN, scancode);
+ input_report_key(input, scancode, down);
+ input_sync(input);
+ }
+
+irq_exit:
+ return IRQ_HANDLED;
+}
+
+static int qcikbd_open(struct input_dev *dev)
+{
+ struct qci_keyboard *qcikbd = input_get_drvdata(dev);
+ u8 buf[1] = { QCI_KEYBOARD_CMD_ENABLE };
+
+ i2c_master_send(qcikbd->client, buf, 1);
+
+ return 0;
+}
+
+static void qcikbd_close(struct input_dev *dev)
+{
+ struct qci_keyboard *qcikbd = input_get_drvdata(dev);
+ u8 buf[1] = { QCI_KEYBOARD_CMD_DISABLE };
+
+ i2c_master_send(qcikbd->client, buf, 1);
+}
+
+static int __devinit qcikbd_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ const struct qci_keyboard_platform_data *pd = client->dev.platform_data;
+ struct qci_keyboard *qcikbd;
+ struct input_dev *input;
+ int irq_trigger_type;
+ int err;
+ int i;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ pr_err("i2c functionality failed\n");
+ return -ENODEV;
+ }
+
+ qcikbd = kzalloc(sizeof(struct qci_keyboard), GFP_KERNEL);
+ input = input_allocate_device();
+ if (!qcikbd || input) {
+ err = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ qcikbd->client = client;
+ qcikbd->input = input;
+ qcikbd->gpio = client->irq;
+
+ input->name = QCI_KEYBOARD_NAME;
+ input->phys = QCI_KEYBOARD_DEVICE;
+ input->id.bustype = BUS_I2C;
+ input->id.vendor = 0x1050;
+ input->id.product = 0x0006;
+ input->id.version = 0x0004;
+ input->open = qcikbd_open;
+ input->close = qcikbd_close;
+
+ __set_bit(EV_KEY, input->evbit);
+ __set_bit(EV_REP, input->evbit);
+ __set_bit(MSC_SCAN, input->mscbit);
+
+ /* Enable all supported keys */
+ for (i = 1; i <= QCI_KEYBOARD_MAX_KEY; i++)
+ __set_bit(i, input->keybit);
+
+ input_set_drvdata(qcikbd->input, qcikbd);
+
+ err = gpio_request(qcikbd->gpio, "qci-gkbd");
+ if (err) {
+ pr_err("gpio request failed\n");
+ goto err_free_mem;
+ }
+
+ err = gpio_direction_input(qcikbd->gpio);
+ if (err) {
+ pr_err("gpio direction failed\n");
+ goto err_free_gpio;
+ }
+
+ qcikbd->irq = gpio_to_irq(qcikbd->gpio);
+ irq_trigger_type = pd ? pd->irq_trigger_type : IRQF_TRIGGER_FALLING;
+ err = request_threaded_irq(qcikbd->irq, NULL, qcikbd_interrupt,
+ irq_trigger_type, client->name, qcikbd);
+ if (err) {
+ pr_err("unable to get IRQ\n");
+ goto err_free_gpio;
+ }
+
+ err = input_register_device(qcikbd->input);
+ if (err) {
+ pr_err("input register device failed\n");
+ goto err_free_irq;
+ }
+
+ i2c_set_clientdata(client, qcikbd);
+ return 0;
+
+err_free_irq:
+ free_irq(qcikbd->irq, qcikbd);
+err_free_gpio:
+ gpio_free(qcikbd->gpio);
+err_free_mem:
+ input_free_device(input);
+ kfree(qcikbd);
+
+ return err;
+}
+
+static int __devexit qcikbd_remove(struct i2c_client *dev)
+{
+ struct qci_keyboard *qcikbd = i2c_get_clientdata(dev);
+
+ free_irq(qcikbd->irq, qcikbd);
+ gpio_free(qcikbd->gpio);
+ input_unregister_device(qcikbd->input);
+ kfree(qcikbd);
+
+ return 0;
+}
+
+static const struct i2c_device_id qcikbd_idtable[] = {
+ { "wpce775-keyboard", 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, qcikbd_idtable);
+
+static struct i2c_driver i2ckbd_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = QCI_KEYBOARD_ID_NAME,
+#ifdef CONFIG_PM
+ .pm = &qcikbd_pm_ops,
+#endif
+ },
+ .probe = qcikbd_probe,
+ .remove = __devexit_p(qcikbd_remove),
+ .id_table = qcikbd_idtable,
+};
+
+static int __init qcikbd_init(void)
+{
+ return i2c_add_driver(&i2ckbd_driver);
+}
+
+static void __exit qcikbd_exit(void)
+{
+ i2c_del_driver(&i2ckbd_driver);
+}
+
+module_init(qcikbd_init);
+module_exit(qcikbd_exit);
+
+MODULE_AUTHOR("Quanta Computer Inc.");
+MODULE_DESCRIPTION("Quanta Embedded Controller I2C Keyboard Driver");
+MODULE_ALIAS("platform:qci-gkbd");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/input/qci_keyboard.h b/include/linux/input/qci_keyboard.h
new file mode 100644
index 0000000..b32b7fc
--- /dev/null
+++ b/include/linux/input/qci_keyboard.h
@@ -0,0 +1,25 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef __QCI_KEYBOARD_H
+#define __QCI_KEYBOARD_H
+
+struct qci_keyboard_platform_data {
+ unsigned long irq_trigger_type;
+};
+
+#endif
Input: add qci touchpad driver
From: Neil Leeder <nleeder@xxxxxxxxxxxxxx>
This driver is for the QCI trackpad used on Quanta smartbooks
Signed-off-by: Horace Fu <horace.fu@xxxxxxxxxxxx>
Signed-off-by: Mandeep Singh Baines <msb@xxxxxxxxxxxx>
[nleeder@xxxxxxxxxxxxxx: cleanup i2c calls, address review comments etc]
Signed-off-by: Neil Leeder <nleeder@xxxxxxxxxxxxxx>
Signed-off-by: Dmitry Torokhov <dtor@xxxxxxx>
---
drivers/input/mouse/Kconfig | 12 ++
drivers/input/mouse/Makefile | 1
drivers/input/mouse/qci_touchpad.c | 279 ++++++++++++++++++++++++++++++++++++
include/linux/input/qci_touchpad.h | 25 +++
4 files changed, 317 insertions(+), 0 deletions(-)
create mode 100644 drivers/input/mouse/qci_touchpad.c
create mode 100644 include/linux/input/qci_touchpad.h
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index c714ca2..fec262a 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -303,6 +303,18 @@ config MOUSE_MAPLE
To compile this driver as a module choose M here: the module will be
called maplemouse.
+config MOUSE_QCITP
+ tristate "Quanta Computer Inc. I2C Touchpad"
+ depends on I2C
+ help
+ This driver supports the touchpad on Quanta smartbook devices.
+
+ Say Y here if you have a Quanta-based smartbook or notepad
+ device and want to use the Quanta i2c touchpad driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called qci_touchpad.
+
config MOUSE_SYNAPTICS_I2C
tristate "Synaptics I2C Touchpad support"
depends on I2C
diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
index 570c84a4..6eda35d 100644
--- a/drivers/input/mouse/Makefile
+++ b/drivers/input/mouse/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_MOUSE_MAPLE) += maplemouse.o
obj-$(CONFIG_MOUSE_PC110PAD) += pc110pad.o
obj-$(CONFIG_MOUSE_PS2) += psmouse.o
obj-$(CONFIG_MOUSE_PXA930_TRKBALL) += pxa930_trkball.o
+obj-$(CONFIG_MOUSE_QCITP) += qci_touchpad.o
obj-$(CONFIG_MOUSE_RISCPC) += rpcmouse.o
obj-$(CONFIG_MOUSE_SERIAL) += sermouse.o
obj-$(CONFIG_MOUSE_SYNAPTICS_I2C) += synaptics_i2c.o
diff --git a/drivers/input/mouse/qci_touchpad.c b/drivers/input/mouse/qci_touchpad.c
new file mode 100644
index 0000000..ac52403
--- /dev/null
+++ b/drivers/input/mouse/qci_touchpad.c
@@ -0,0 +1,279 @@
+/* Quanta I2C Touchpad Driver
+ *
+ * Copyright (C) 2009 Quanta Computer Inc.
+ * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ * Author: Hsin Wu <hsin.wu@xxxxxxxxxxxx>
+ * Author: Austin Lai <austin.lai@xxxxxxxxxxxx>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+/*
+ * Driver communicates over i2c to nuvoTon WPCE775x Embedded Controller,
+ * which has touchpad attached through PS/2 interface. Unfortunately
+ * firmware does not seem to fully support PS/2 protocol so attempts to
+ * turn the driver into serio and use standard psmouse module to drive
+ * the touchpad failed.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/input/qci_touchpad.h>
+
+#define TOUCHPAD_ID_NAME "qci-i2cpad"
+#define TOUCHPAD_NAME "QCI Touchpad"
+#define TOUCHPAD_DEVICE "/qci_touchpad/input0"
+#define TOUCHPAD_CMD_ENABLE 0xF4
+#define TOUCHPAD_CMD_DISABLE 0xF5
+#define TOUCHPAD_READ_DATA_LEN 3
+#define TOUCHPAD_INIT_DELAY_MS 100
+
+struct qci_touchpad {
+ struct i2c_client *client;
+ struct input_dev *input;
+ unsigned int gpio;
+ unsigned int irq;
+};
+
+#ifdef CONFIG_PM
+static int qcitp_suspend(struct device *dev)
+{
+ struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+ struct qci_touchpad *tpad = i2c_get_clientdata(client);
+
+ disable_irq(tpad->irq);
+
+ return 0;
+}
+
+static int qcitp_resume(struct device *dev)
+{
+ struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+ struct qci_touchpad *tpad = i2c_get_clientdata(client);
+
+ enable_irq(tpad->irq);
+
+ return 0;
+}
+
+static const struct dev_pm_ops qcitp_pm_ops = {
+ .suspend = qcitp_suspend,
+ .resume = qcitp_resume,
+};
+#endif
+
+static void qcitp_report_key(struct input_dev *tpad_dev, char *ec_data)
+{
+ int dx = 0;
+ int dy = 0;
+
+ if (ec_data[1])
+ dx = (int) ec_data[1] -
+ (int) ((ec_data[0] << 4) & 0x100);
+
+ if (ec_data[2])
+ dy = (int) ((ec_data[0] << 3) & 0x100) -
+ (int) ec_data[2];
+
+ input_report_key(tpad_dev, BTN_LEFT, ec_data[0] & 0x01);
+ input_report_key(tpad_dev, BTN_RIGHT, ec_data[0] & 0x02);
+ input_report_key(tpad_dev, BTN_MIDDLE, ec_data[0] & 0x04);
+ input_report_rel(tpad_dev, REL_X, dx);
+ input_report_rel(tpad_dev, REL_Y, dy);
+ input_sync(tpad_dev);
+}
+
+static irqreturn_t qcitp_interrupt(int irq, void *dev_id)
+{
+ struct qci_touchpad *tpad = dev_id;
+ char ecdata[TOUCHPAD_READ_DATA_LEN];
+ int rc;
+
+ rc = i2c_master_recv(tpad->client, ecdata, TOUCHPAD_READ_DATA_LEN);
+ if (rc == TOUCHPAD_READ_DATA_LEN)
+ qcitp_report_key(tpad->input, ecdata);
+
+ return IRQ_HANDLED;
+}
+
+static int qcitp_open(struct input_dev *input)
+{
+ struct qci_touchpad *tpad = input_get_drvdata(input);
+ u8 buf[1] = { TOUCHPAD_CMD_ENABLE };
+ int err;
+
+ buf[0] = TOUCHPAD_CMD_ENABLE;
+ err = i2c_master_send(tpad->client, buf, 1);
+ if (err < 0)
+ return err;
+
+ msleep(TOUCHPAD_INIT_DELAY_MS);
+
+ return i2c_master_recv(tpad->client, buf, 1);
+}
+
+static void qcitp_close(struct input_dev *input)
+{
+ struct qci_touchpad *tpad = input_get_drvdata(input);
+ u8 buf[1] = { TOUCHPAD_CMD_DISABLE };
+ int err;
+
+ err = i2c_master_send(tpad->client, buf, 1);
+ if (err == 0) {
+ msleep(TOUCHPAD_INIT_DELAY_MS);
+ /* read ACK */
+ i2c_master_recv(tpad->client, buf, 1);
+ }
+}
+
+
+static int __devinit qcitp_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ const struct qci_touchpad_platform_data *pd = client->dev.platform_data;
+ struct qci_touchpad *tpad;
+ struct input_dev *input;
+ int irq_trigger_type;
+ int err;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ pr_err("i2c functionality failed\n");
+ return -ENODEV;
+ }
+
+ tpad = kzalloc(sizeof(struct qci_touchpad), GFP_KERNEL);
+ input = input_allocate_device();
+ if (!tpad || !input) {
+ err = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ tpad->client = client;
+ tpad->input = input;
+ tpad->gpio = client->irq;
+
+ input->name = TOUCHPAD_NAME;
+ input->phys = TOUCHPAD_DEVICE;
+ input->id.bustype = BUS_I2C;
+ input->id.vendor = 0x1050;
+ input->id.product = 0x1;
+ input->id.version = 0x1;
+
+ input->open = qcitp_open;
+ input->close = qcitp_close;
+
+ input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
+ input->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
+ input->keybit[BIT_WORD(BTN_LEFT)] =
+ BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
+
+ input_set_drvdata(input, tpad);
+
+ err = gpio_request(tpad->gpio, "qci-pad");
+ if (err) {
+ pr_err("gpio request failed\n");
+ goto err_free_mem;
+ }
+
+ err = gpio_direction_input(tpad->gpio);
+ if (err) {
+ pr_err("gpio direction input failed\n");
+ goto err_free_gpio;
+ }
+
+ tpad->irq = gpio_to_irq(tpad->gpio);
+ irq_trigger_type = pd ? pd->irq_trigger_type : IRQF_TRIGGER_FALLING;
+
+ err = request_threaded_irq(tpad->irq, NULL, qcitp_interrupt,
+ irq_trigger_type, client->name, tpad);
+ if (err) {
+ pr_err("request threaded irq failed\n");
+ goto err_free_gpio;
+ }
+
+ err = input_register_device(tpad->input);
+ if (err) {
+ pr_err("register device failed\n");
+ goto err_free_irq;
+ }
+
+ i2c_set_clientdata(client, tpad);
+ return 0;
+
+err_free_irq:
+ free_irq(tpad->irq, tpad);
+err_free_gpio:
+ gpio_free(tpad->gpio);
+err_free_mem:
+ input_free_device(input);
+ kfree(tpad);
+ return err;
+}
+
+static int __devexit qcitp_remove(struct i2c_client *client)
+{
+ struct qci_touchpad *tpad = i2c_get_clientdata(client);
+
+ free_irq(tpad->irq, tpad);
+ gpio_free(tpad->gpio);
+ input_unregister_device(tpad->input);
+ kfree(tpad);
+
+ return 0;
+}
+
+static const struct i2c_device_id qcitp_idtable[] = {
+ { "wpce775-touchpad", 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, qcitp_idtable);
+
+static struct i2c_driver i2ctp_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = TOUCHPAD_ID_NAME,
+#ifdef CONFIG_PM
+ .pm = &qcitp_pm_ops,
+#endif
+ },
+ .probe = qcitp_probe,
+ .remove = __devexit_p(qcitp_remove),
+ .id_table = qcitp_idtable,
+};
+
+static int __init qcitp_init(void)
+{
+ return i2c_add_driver(&i2ctp_driver);
+}
+
+
+static void __exit qcitp_exit(void)
+{
+ i2c_del_driver(&i2ctp_driver);
+}
+
+module_init(qcitp_init);
+module_exit(qcitp_exit);
+
+MODULE_AUTHOR("Quanta Computer Inc.");
+MODULE_DESCRIPTION("Quanta Embedded Controller I2C Touchpad Driver");
+MODULE_ALIAS("platform:qci-touchpad");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/input/qci_touchpad.h b/include/linux/input/qci_touchpad.h
new file mode 100644
index 0000000..8e266e4
--- /dev/null
+++ b/include/linux/input/qci_touchpad.h
@@ -0,0 +1,25 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef __QCI_TOUCHPAD_H
+#define __QCI_TOUCHPAD_H
+
+struct qci_touchpad_platform_data {
+ unsigned long irq_trigger_type;
+};
+
+#endif
Input: qci_gkbd - allow changing keymap from userspace
From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Wire up input->keycode, input->keycodemax and input->keycodesize so
that EVIOGSKEYCODE ioctl works for the device and users can adjust
keymap from userspace.
Signed-off-by: Dmitry Torokhov <dtor@xxxxxxx>
---
drivers/input/keyboard/qci_gkbd.c | 12 ++++++++++--
1 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/input/keyboard/qci_gkbd.c b/drivers/input/keyboard/qci_gkbd.c
index 6cc06c4..905d76b 100644
--- a/drivers/input/keyboard/qci_gkbd.c
+++ b/drivers/input/keyboard/qci_gkbd.c
@@ -46,6 +46,7 @@ struct qci_keyboard {
struct input_dev *input;
unsigned int gpio;
unsigned int irq;
+ unsigned short keymap[QCI_KEYBOARD_MAX_KEY + 1];
};
#ifdef CONFIG_PM
@@ -96,7 +97,7 @@ static irqreturn_t qcikbd_interrupt(int irq, void *dev_id)
if (scancode) {
input_event(input, EV_MSC, MSC_SCAN, scancode);
- input_report_key(input, scancode, down);
+ input_report_key(input, qcikbd->keymap[scancode], down);
input_sync(input);
}
@@ -161,9 +162,16 @@ static int __devinit qcikbd_probe(struct i2c_client *client,
__set_bit(EV_REP, input->evbit);
__set_bit(MSC_SCAN, input->mscbit);
+ input->keycode = qcikbd->keymap;
+ input->keycodesize = sizeof(qcikbd->keymap[0]);
+ input->keycodemax = ARRAY_SIZE(qcikbd->keymap);
+
/* Enable all supported keys */
- for (i = 1; i <= QCI_KEYBOARD_MAX_KEY; i++)
+ for (i = 1; i <= QCI_KEYBOARD_MAX_KEY; i++) {
+ /* Initial keymap has 1:1 scancode - keycode mapping */
+ qcikbd->keymap[i] = i;
__set_bit(i, input->keybit);
+ }
input_set_drvdata(qcikbd->input, qcikbd);