Re: Please add generic support for root=UUID= at kernel parametercommand line (LABEL, BYID maybe also)

[Florian Mickler]

On Mon, 23 Aug 2010 16:10:13 +0200
Eric Valette <Eric.Valette@xxxxxxx> wrote:

> Hi,
> 
> I just bought an new external disk enclosure with e-sata/USB2 connector 
> to replace an old USB2 only external disk enclosure.
> 
> My internal drive is a small SSD because I use the small factor PC as a 
> home theater and do want silence and fast boot. I build my own kernel to 
> put only what I need in and also boot somehow faster.
> 
> I use grub2 (up to date) as a loader. As soon as I power on the external 
> sata disk, the system does not boot because hardware designer add the 
> great idea to put the internal sata connector on ata3 whereas the 
> external e-sata is wired on ata2.
> 
> consequence is that root file system is on sda1 when no external drive 
> is connected and sdb1 when the external drive is connected.
> 
> As my grub setup was having a root=/dev/sda1 command line parameter and 
> it was advertised everywhere that root=UUID=xxxxx was now supported, I 
> changed the line to discover that this only work if an initramfs was 
> loaded because support is done entirely in used space! Reading 
> init/do_mounts.c made it very clear.
> 
> I find it extremely curious to have to add an initramfs to support 
> dynamic drive identification, especially when the BYID value is 
> displayed during boot message.
> 
> The boot loader cannot do a better job than the kernel and its life may 
> be even worse as bios value for the same disk may change according to 
> boot disk priorities.
> 
> Any hint comment? Any other way to avoid using a ramdisk? Please CC me 
> as I'm not subscribed.
> 
> -- eric
> 
> 
> 


I'm not exactly shure, but isn't the search command in grub2 what you
want?

http://forums.linuxmint.com/viewtopic.php?f=46&t=38599

You can let grub2 figure out which drive is which and pass the right
devices to the kernel...



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/