ath5k problem with 2.6.35

[Thomas Fjellstrom]

Hi, I'm running 2.6.35, and my wireless card fails to initialize properly on 
boot. I get the following messages in dmesg:

[    0.866525] ath5k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.866536] ath5k 0000:02:00.0: setting latency timer to 64
[    0.866571] ath5k 0000:02:00.0: registered as 'phy0'
[    1.358241] ath: EEPROM regdomain: 0x67
[    1.358242] ath: EEPROM indicates we should expect a direct regpair map
[    1.358245] ath: Country alpha2 being used: 00
[    1.358247] ath: Regpair used: 0x67
[    1.372021] ath5k phy0: can't register ieee80211 hw
[    1.372080] ath5k 0000:02:00.0: PCI INT A disabled
[    1.372084] ath5k: probe of 0000:02:00.0 failed with error -2

That said, if I remove the ath5k module, and modprobe ath5k, it starts 
working.

[ 2976.411770] ath5k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2976.411783] ath5k 0000:02:00.0: setting latency timer to 64
[ 2976.412767] ath5k 0000:02:00.0: registered as 'phy1'
[ 2976.912422] ath: EEPROM regdomain: 0x67
[ 2976.912424] ath: EEPROM indicates we should expect a direct regpair map
[ 2976.912427] ath: Country alpha2 being used: 00
[ 2976.912429] ath: Regpair used: 0x67
[ 2977.079190] ath5k phy1: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)

Is this a known issue?

-- 
Thomas Fjellstrom
tfjellstrom@xxxxxxxxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/