2.6.31.14: firewire_net issue in generic_sync_sb_inodes
From: Martin Mokrejs
Date: Thu Jul 22 2010 - 06:57:02 EST
Hi,
I have a laptop temporarily connected via firewire 1394a to another machine.
The machine cannot sync using Alt+SysRQ+s since some conditions. Sometimes it
locks up completely and only keyboard leds are flashing and CPU fan runs at
max speed. Attached is one stacktrace I have, the other lockups are more serious
and until I find a serial cable I cannot tell you more. I cannot go for 2.6.32 or
higher here but in theory could test them temporarily. There are two firewire ports
on this Asus L3C/S laptop.
# lspci
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB Controller #2 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:07.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a8)
02:07.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a8)
02:07.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller
#
Thanks for any clues,
Martin
Linux version 2.6.31.14 (root@vrapenec) (gcc version 4.4.4 (Gentoo 4.4.4 p1.0) ) #2 Tue Jul 13 15:14:01 CEST 2010
KERNEL supported cpus:
Intel GenuineIntel
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fff9000 (usable)
BIOS-e820: 000000007fff9000 - 000000007ffff000 (ACPI data)
BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
DMI 2.3 present.
last_pfn = 0x7fff9 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-AFFFF uncachable
B0000-BFFFF write-combining
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 0E0000000 mask FF0000000 write-combining
2 base 0D8000000 mask FF8000000 write-combining
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 7000-c000
ACPI: RSDP 000f6890 00014 (v00 ASUS )
ACPI: RSDT 7fff9000 0002C (v01 ASUS P4_L3CS 42302E31 MSFT 31313031)
ACPI: FACP 7fff9080 00074 (v01 ASUS P4_L3CS 42302E31 MSFT 31313031)
ACPI: DSDT 7fff9100 052E9 (v01 ASUS P4_L3CS 00001000 MSFT 0100000D)
ACPI: FACS 7ffff000 00040
ACPI: BOOT 7fff9040 00028 (v01 ASUS P4_L3CS 42302E31 MSFT 31313031)
1159MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
node 0 low ram: 00000000 - 377fe000
node 0 bootmap 00008000 - 0000ef00
(6 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0001000000 - 000151f664] TEXT DATA BSS ==> [0001000000 - 000151f664]
#2 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#3 [0001520000 - 000152615c] BRK ==> [0001520000 - 000152615c]
#4 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
#5 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007fff9
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0007fff9
On node 0 totalpages: 524184
free_area_init_node: node 0, pgdat c148c8b8, node_mem_map c1527000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2320 pages used for memmap
HighMem zone: 294635 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xe408
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7fff0000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520088
Kernel command line: root=/dev/sda3 console=ttyS0,57600n8 console=tty0 udev
PID hash table entries: 4096 (order: 12, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:0007fff9)
Memory: 2073416k/2097124k available (2989k kernel code, 22496k reserved, 1681k data, 276k init, 1187820k highmem)
virtual kernel memory layout:
fixmap : 0xfffe5000 - 0xfffff000 ( 104 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1490000 - 0xc14d5000 ( 276 kB)
.data : 0xc12eb491 - 0xc148fc04 (1681 kB)
.text : 0xc1000000 - 0xc12eb491 (2989 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:16
Fast TSC calibration using PIT
Detected 1799.939 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.87 BogoMIPS (lpj=1799939)
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
mce: CPU supports 4 MCE banks
CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz stepping 07
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090521
ACPI: setting ELCR to 0200 (from 0a28)
regulator: core version 0.5
NET: Registered protocol family 16
i2c-core: driver [dummy] registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0e40, last bus=2
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Power Resource [PRCF] (off)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xefffffff]
pci 0000:00:1d.0: reg 20 io port: [0xb800-0xb81f]
pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f]
pci 0000:00:1f.0: Enabled i801 SMBus device
pci 0000:00:1f.0: quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region ec00-ec3f claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x9800-0x9807]
pci 0000:00:1f.1: reg 14 io port: [0x9400-0x9403]
pci 0000:00:1f.1: reg 18 io port: [0x9000-0x9007]
pci 0000:00:1f.1: reg 1c io port: [0x8800-0x8803]
pci 0000:00:1f.1: reg 20 io port: [0x8400-0x840f]
pci 0000:00:1f.1: reg 24 32bit mmio: [0xd5800000-0xd58003ff]
pci 0000:00:1f.3: reg 20 io port: [0xe800-0xe81f]
pci 0000:00:1f.5: reg 10 io port: [0xe000-0xe0ff]
pci 0000:00:1f.5: reg 14 io port: [0xe100-0xe13f]
pci 0000:00:1f.6: reg 10 io port: [0xe200-0xe2ff]
pci 0000:00:1f.6: reg 14 io port: [0xe300-0xe37f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff]
pci 0000:01:00.0: reg 14 io port: [0xd800-0xd8ff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xd7000000-0xd700ffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0xd7fe0000-0xd7ffffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:01.0: bridge 32bit mmio: [0xd7000000-0xd7efffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xd7f00000-0xdfffffff]
pci 0000:02:05.0: reg 10 io port: [0xa800-0xa8ff]
pci 0000:02:05.0: reg 14 32bit mmio: [0xd6800000-0xd68000ff]
pci 0000:02:05.0: supports D1 D2
pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:02:05.0: PME# disabled
pci 0000:02:07.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:02:07.0: supports D1 D2
pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:07.0: PME# disabled
pci 0000:02:07.1: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:02:07.1: supports D1 D2
pci 0000:02:07.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:07.1: PME# disabled
pci 0000:02:07.2: reg 10 32bit mmio: [0xd6000000-0xd60007ff]
pci 0000:02:07.2: PME# supported from D0 D3hot D3cold
pci 0000:02:07.2: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xa000-0xafff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xd6000000-0xd6ffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5)
ACPI: PCI Interrupt Link [LNKB] (IRQs 7 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 11) *9
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: WMI: Mapper loaded
PCI: Using ACPI for IRQ routing
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x7fffffff could not be reserved
system 00:02: ioport range 0xe400-0xe47f has been reserved
system 00:02: ioport range 0xe800-0xe81f has been reserved
system 00:02: ioport range 0xec00-0xec3f has been reserved
system 00:02: ioport range 0x40b-0x40b has been reserved
system 00:02: ioport range 0x480-0x48f has been reserved
system 00:02: ioport range 0x4d6-0x4d6 has been reserved
system 00:03: iomem range 0xffa00000-0xffbfffff has been reserved
system 00:03: iomem range 0xffe00000-0xffffffff could not be reserved
system 00:04: ioport range 0x4d0-0x4d1 has been reserved
system 00:04: ioport range 0x77c-0x77f has been reserved
system 00:0e: ioport range 0x610-0x62f has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xd000-0xdfff
pci 0000:00:01.0: MEM window: 0xd7000000-0xd7efffff
pci 0000:00:01.0: PREFETCH window: 0xd7f00000-0xdfffffff
pci 0000:02:07.0: CardBus bridge, secondary bus 0000:03
pci 0000:02:07.0: IO window: 0x00a000-0x00a0ff
pci 0000:02:07.0: IO window: 0x00a400-0x00a4ff
pci 0000:02:07.0: PREFETCH window: 0x80000000-0x83ffffff
pci 0000:02:07.0: MEM window: 0x88000000-0x8bffffff
pci 0000:02:07.1: CardBus bridge, secondary bus 0000:07
pci 0000:02:07.1: IO window: 0x00ac00-0x00acff
pci 0000:02:07.1: IO window: 0x001000-0x0010ff
pci 0000:02:07.1: PREFETCH window: 0x84000000-0x87ffffff
pci 0000:02:07.1: MEM window: 0x8c000000-0x8fffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0: IO window: 0xa000-0xafff
pci 0000:00:1e.0: MEM window: 0xd6000000-0xd6ffffff
pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x87ffffff
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
pci 0000:02:07.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
pci 0000:02:07.1: enabling device (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:02:07.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:01: resource 1 mem: [0xd7000000-0xd7efffff]
pci_bus 0000:01: resource 2 pref mem [0xd7f00000-0xdfffffff]
pci_bus 0000:02: resource 0 io: [0xa000-0xafff]
pci_bus 0000:02: resource 1 mem: [0xd6000000-0xd6ffffff]
pci_bus 0000:02: resource 2 pref mem [0x80000000-0x87ffffff]
pci_bus 0000:02: resource 3 io: [0x00-0xffff]
pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:03: resource 0 io: [0xa000-0xa0ff]
pci_bus 0000:03: resource 1 io: [0xa400-0xa4ff]
pci_bus 0000:03: resource 2 pref mem [0x80000000-0x83ffffff]
pci_bus 0000:03: resource 3 mem: [0x88000000-0x8bffffff]
pci_bus 0000:07: resource 0 io: [0xac00-0xacff]
pci_bus 0000:07: resource 1 io: [0x1000-0x10ff]
pci_bus 0000:07: resource 2 pref mem [0x84000000-0x87ffffff]
pci_bus 0000:07: resource 3 mem: [0x8c000000-0x8fffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Simple Boot Flag at 0x3a set to 0x1
microcode: CPU0 sig=0xf27, pf=0x8, revision=0x0
Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
highmem bounce pool size: 64 pages
DLM (built Jul 13 2010 12:11:45) installed
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.12)
msgmni has been set to 1731
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for fcrypt (fcrypt-generic)
alg: No test for stdrng (krng)
alg: No test for stdrng (ansi_cprng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp_glue: can't get bus number, assuming 0
acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
radeonfb 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=230.00 Mhz, System=183.00 MHz
radeonfb: PLL min 12000 max 35000
i2c-adapter i2c-0: adapter [radeonfb monid] registered
i2c-adapter i2c-1: adapter [radeonfb dvi] registered
i2c-adapter i2c-2: adapter [radeonfb vga] registered
i2c-adapter i2c-3: adapter [radeonfb crt2] registered
i2c-adapter i2c-1: master_xfer[0] W, addr=0x50, len=1
i2c-adapter i2c-1: master_xfer[1] R, addr=0x50, len=128
i2c-adapter i2c-1: NAK from device addr 0x50 msg #0
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: master_xfer[0] W, addr=0x50, len=1
i2c-adapter i2c-1: master_xfer[1] R, addr=0x50, len=128
i2c-adapter i2c-1: NAK from device addr 0x50 msg #0
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: master_xfer[0] W, addr=0x50, len=1
i2c-adapter i2c-1: master_xfer[1] R, addr=0x50, len=128
i2c-adapter i2c-1: NAK from device addr 0x50 msg #0
i2c-adapter i2c-1: unable to read EDID block.
Switched to high resolution mode on CPU 0
i2c-adapter i2c-3: master_xfer[0] W, addr=0x50, len=1
i2c-adapter i2c-3: master_xfer[1] R, addr=0x50, len=128
i2c-adapter i2c-3: NAK from device addr 0x50 msg #0
i2c-adapter i2c-3: unable to read EDID block.
i2c-adapter i2c-3: master_xfer[0] W, addr=0x50, len=1
i2c-adapter i2c-3: master_xfer[1] R, addr=0x50, len=128
i2c-adapter i2c-3: NAK from device addr 0x50 msg #0
i2c-adapter i2c-3: unable to read EDID block.
i2c-adapter i2c-3: master_xfer[0] W, addr=0x50, len=1
i2c-adapter i2c-3: master_xfer[1] R, addr=0x50, len=128
i2c-adapter i2c-3: NAK from device addr 0x50 msg #0
i2c-adapter i2c-3: unable to read EDID block.
Non-DDC laptop panel detected
i2c-adapter i2c-2: master_xfer[0] W, addr=0x50, len=1
i2c-adapter i2c-2: master_xfer[1] R, addr=0x50, len=128
i2c-adapter i2c-2: NAK from device addr 0x50 msg #0
i2c-adapter i2c-2: unable to read EDID block.
i2c-adapter i2c-2: master_xfer[0] W, addr=0x50, len=1
i2c-adapter i2c-2: master_xfer[1] R, addr=0x50, len=128
i2c-adapter i2c-2: NAK from device addr 0x50 msg #0
i2c-adapter i2c-2: unable to read EDID block.
i2c-adapter i2c-2: master_xfer[0] W, addr=0x50, len=1
i2c-adapter i2c-2: master_xfer[1] R, addr=0x50, len=128
i2c-adapter i2c-2: NAK from device addr 0x50 msg #0
i2c-adapter i2c-2: unable to read EDID block.
i2c-adapter i2c-3: master_xfer[0] W, addr=0x50, len=1
i2c-adapter i2c-3: master_xfer[1] R, addr=0x50, len=128
i2c-adapter i2c-3: NAK from device addr 0x50 msg #0
i2c-adapter i2c-3: unable to read EDID block.
i2c-adapter i2c-3: master_xfer[0] W, addr=0x50, len=1
i2c-adapter i2c-3: master_xfer[1] R, addr=0x50, len=128
i2c-adapter i2c-3: NAK from device addr 0x50 msg #0
i2c-adapter i2c-3: unable to read EDID block.
i2c-adapter i2c-3: master_xfer[0] W, addr=0x50, len=1
i2c-adapter i2c-3: master_xfer[1] R, addr=0x50, len=128
i2c-adapter i2c-3: NAK from device addr 0x50 msg #0
i2c-adapter i2c-3: unable to read EDID block.
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: Samsung LTN150P1-L02
radeonfb: detected LVDS panel size from BIOS: 1400x1050
radeondb: BIOS provided dividers will be used
radeonfb: Dynamic Clock Power Management enabled
Console: switching to colour frame buffer device 175x65
radeonfb (0000:01:00.0): ATI Radeon 4c57 "LW"
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LIDD]
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [CFAN] (off)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input3
ACPI: Video Device [VGAC] (multi-head: yes rom: no post: no)
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2])
processor LNXCPU:00: registered as cooling_device1
ACPI: Processor [CPU0] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (41 C)
ACPI: Battery Slot [BAT0] (battery present)
lp: driver loaded but no devices found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
serial 0000:00:1f.6: PCI INT B disabled
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
loop: module loaded
nbd: registered device at major 43
ata_piix 0000:00:1f.1: version 2.13
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 3 (level, low) -> IRQ 3
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8400 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8408 irq 15
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
yenta_cardbus 0000:02:07.0: CardBus bridge found [1043:1624]
ata2.01: ATAPI: Optiarc DVD RW AD-7590A, 1.05, max UDMA/33
ata2.01: configured for UDMA/33
ata1.00: ATA-8: WDC WD3200BEVE-00A0HT0, 11.01A11, max UDMA/100
ata1.00: 625142448 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVE-0 11.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
sd 0:0:0:0: Attached scsi generic sg0 type 0
sda1 sda2 sda3 sda4
scsi 1:0:1:0: CD-ROM Optiarc DVD RW AD-7590A 1.05 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sd 0:0:0:0: [sda] Attached SCSI disk
sr 1:0:1:0: Attached scsi CD-ROM sr0
sr 1:0:1:0: Attached scsi generic sg1 type 5
yenta_cardbus 0000:02:07.0: ISA IRQ mask 0x0490, PCI irq 5
yenta_cardbus 0000:02:07.0: Socket status: 30000006
pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xafff: clean.
yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge Memory window: 0xd6000000 - 0xd6ffffff
yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x87ffffff
yenta_cardbus 0000:02:07.1: CardBus bridge found [1043:1624]
yenta_cardbus 0000:02:07.1: ISA IRQ mask 0x0490, PCI irq 11
yenta_cardbus 0000:02:07.1: Socket status: 30000006
pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a
yenta_cardbus 0000:02:07.1: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa000-0xafff: clean.
yenta_cardbus 0000:02:07.1: pcmcia: parent PCI bridge Memory window: 0xd6000000 - 0xd6ffffff
yenta_cardbus 0000:02:07.1: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x87ffffff
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input4
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0xe460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
iTCO_vendor_support: vendor-support=0
cpuidle: using governor ladder
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
Asus Laptop ACPI Extras version 0.30
L3C model detected, supported
Advanced Linux Sound Architecture Driver Version 1.0.20.
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Intel ICH 0000:00:1f.5: setting latency timer to 64
Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
intel8x0_measure_ac97_clock: measured 50914 usecs (2448 samples)
intel8x0: clocking to 48000
Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
ALSA device list:
#0: Intel 82801CA-ICH3 with CS4299 at irq 11
#1: Intel 82801CA-ICH3 Modem at irq 11
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
SCTP: Hash tables configured (established 65536 bind 65536)
rtc_cmos 00:06: setting system clock to 2010-07-20 11:20:36 UTC (1279624836)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
Freeing unused kernel memory: 276k freed
udev: starting version 160
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
8139too 0000:02:05.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
eth0: RealTek RTL8139 at 0xf805a000, 00:e0:18:b6:9d:31, IRQ 11
agpgart-intel 0000:00:00.0: Intel 845G Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (interrupt-driven).
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 5, io base 0x0000b800
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31.14 uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000b400
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31.14 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-2: new low speed USB device using uhci_hcd and address 2
usb 1-2: New USB device found, idVendor=0458, idProduct=0036
usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-2: Product: NetScroll + Mini Traveler
usb 1-2: Manufacturer: Genius
usb 1-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
firewire_ohci 0000:02:07.2: PCI INT C -> Link[LNKC] -> GSI 3 (level, low) -> IRQ 3
input: Genius NetScroll + Mini Traveler as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input7
generic-usb 0003:0458:0036.0001: input,hidraw0: USB HID v1.10 Mouse [Genius NetScroll + Mini Traveler] on usb-0000:00:1d.0-2/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
firewire_ohci: isochronous cycle too long
firewire_ohci: Added fw-ohci device 0000:02:07.2, OHCI version 1.0
firewire_core: created device fw0: GUID 00e018000305e5fc, S400
firewire_core: created device fw1: GUID 0011d80001762a80, S400
firewire_net: firewire0: IPv4 over FireWire on device 00e018000305e5fc
firewire_core: refreshed device fw0
EXT3 FS on sda3, internal journal
Adding 2763172k swap on /dev/sda4. Priority:-1 extents:1 across:2763172k
eth0: link down
i2c /dev entries driver
i2c-core: driver [dev_driver] registered
i2c-dev: adapter [radeonfb monid] registered as minor 0
i2c-dev: adapter [radeonfb dvi] registered as minor 1
i2c-dev: adapter [radeonfb vga] registered as minor 2
i2c-dev: adapter [radeonfb crt2] registered as minor 3
Clocksource tsc unstable (delta = -111310423 ns)
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
agpgart-intel 0000:00:00.0: AGP 2.0 bridge
agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
radeonfb 0000:01:00.0: putting AGP V2 device into 4x mode
[drm] Setting GART location based on new memory map
[drm] Loading R100 Microcode
[drm] writeback test succeeded in 1 usecs
microcode: CPU0 updated to revision 0x39, date = 2003-06-04
kdc[2536]: segfault at 0 ip (null) sp bfae431c error 4 in kdc[8048000+6000]
eth0: link down
eth0: link down
eth0: link down
firewire_core: phy config: card 0, new root=ffc1, gap_count=5
firewire_core: phy config: card 0, new root=ffc1, gap_count=5
firewire_core: created device fw1: GUID 0011d80001762a80, S400
firewire_core: phy config: card 0, new root=ffc1, gap_count=5
firewire_core: refreshed device fw1
BUG: unable to handle kernel paging request at 631a544b
IP: [<c106eca0>] generic_sync_sb_inodes+0x338/0x356
*pde = 00000000
Oops: 0000 [#1]
last sysfs file: /sys/devices/virtual/thermal/thermal_zone0/temp
Modules linked in: radeon drm asus_atk0110 i2c_dev firewire_net firewire_ohci usbhid pcmcia firewire_core uhci_hcd usbcore parport_pc intel_agp 8139too
Pid: 6259, comm: sync Not tainted (2.6.31.14 #2) System Name
EIP: 0060:[<c106eca0>] EFLAGS: 00210202 CPU: 0
EIP is at generic_sync_sb_inodes+0x338/0x356
EAX: f66e90b0 EBX: 631a543b ECX: 00000017 EDX: 00000000
ESI: f6478ebc EDI: f66abb20 EBP: f6bf7f48 ESP: f6bf7f20
DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
Process sync (pid: 6259, ti=f6bf6000 task=f5b80780 task.ti=f6bf6000)
Stack:
00000000 00000001 f694a27c 018d2550 f694a274 f694a26c f694a264 f694a200
<0> 00000001 f6bf7f78 f6bf7f80 c106ed21 00000000 00000001 00000000 7fffffff
<0> 00000000 00000000 00000000 ffffffff 7fffffff 00000000 f694a200 00000001
Call Trace:
[<c106ed21>] ? sync_inodes_sb+0x63/0x6a
[<c107154b>] ? __sync_filesystem+0xe/0x2f
[<c10715d2>] ? sync_filesystems+0x66/0x97
[<c1071649>] ? sys_sync+0x1b/0x2d
[<c10027c8>] ? sysenter_do_call+0x12/0x26
Code: 00 00 00 83 7e 28 00 74 1c 89 d8 e8 57 8e ff ff 89 f8 e8 50 92 ff ff 89 f0 e8 3e 01 fd ff e8 2f ab 27 00 89 df 8b 5b 10 83 eb 10 <8b> 43 10 0f 18 00 90 8d 43 10 39 45 f0 75 ba 89 f8 e8 26 92 ff
EIP: [<c106eca0>] generic_sync_sb_inodes+0x338/0x356 SS:ESP 0068:f6bf7f20
CR2: 00000000631a544b
---[ end trace 9026d4b0825a681b ]---
firewire_net: fwnet_write_complete: failed: 13
dummy0 Link encap:Ethernet HWaddr b6:ca:99:36:7d:f8
BROADCAST NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth0 Link encap:Ethernet HWaddr 00:e0:18:b6:9d:31
inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:11 Base address:0xa000
firewire0 Link encap:UNSPEC HWaddr 00-E0-18-00-03-05-E5-FC-00-00-00-00-00-00-00-00
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:706702 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:3 dropped:3 overruns:0 carrier:0
collisions:0 txqueuelen:10
RX bytes:386087645 (368.2 MiB) TX bytes:0 (0.0 B)
gre0 Link encap:UNSPEC HWaddr 00-00-00-00-FF-00-00-00-00-00-00-00-00-00-00-00
NOARP MTU:1476 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:6562 errors:0 dropped:0 overruns:0 frame:0
TX packets:6562 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:639084 (624.1 KiB) TX bytes:639084 (624.1 KiB)
tunl0 Link encap:IPIP Tunnel HWaddr
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
# sync
Killed
#