Re: tip/master broken with x2apic and kexec

From: Yinghai Lu
Date: Wed Jul 14 2010 - 19:00:57 EST


On 07/14/2010 02:23 PM, Yinghai Lu wrote:
> On 07/14/2010 01:35 PM, Yinghai Lu wrote:
>> On 07/13/2010 04:27 PM, Yinghai Lu wrote:
>>> On 07/13/2010 03:00 PM, H. Peter Anvin wrote:
>>>> On 07/12/2010 07:59 PM, Yinghai Lu wrote:
>>>>> tip/master:
>>>>> system1: BIOS enabled x2apic, first kernel boot well, and when kexec second kernel will cause system instant reboot.
>>>>>
>>>>> system2: BIOS not enable x2apic, first kernel boot well and enable x2apic, and kexec second kernel well. but when kexec third kernel will case system instant reboot.
>>>>>
>>>>> linus' tree is ok.
>>>>>
>>>>> but for system2 if boot with nox2apic ,intr-remaping off, iommu off, the kexec loop test will pass.
>>>>>
>>>>> the problem looks start in recent two or three weeks.
>>>>>
>>>>> Any idea?
>>>>>
>>>>> bisecting will take a while, because the system post take a while everytime.
>>>>>
>>>>> Thanks
>>>>>
>>>>> Yinghai Lu
>>>>
>>>> OK, I found the bug... if you could test out the patch which will be
>>>> sent out shortly I would very much appreciate it.
>>>
>>> not sure if your patch is the offending one now.
>>>
>>> kL: kernel from linus tree
>>> kT1: kernel from tip
>>> kT2: kernel from tip with reverting your patch
>>>
>>> BIOS-->kL ---> kL ---> kL....always working
>>> BIOS-->kT1 ---> kT1 ---> kT1 : between second one and third one system reset instant...
>>> BIOS-->kT2 ---> kT2 ---> kT2 : between second one and third one system reset instant...
>>>
>>> BIOS-->kL ---> kL ---> kL ---> then kT1 ---> kT1 .... always working
>>> BIOS-->kL ---> kL ---> kL ---> then kT2 ---> kT2 .... always working
>>>
>>
>> bisecting said:
>>
>>> git bisect good
>> 58687acba59266735adb8ccd9b5b9aa2c7cd205b is the first bad commit
>> commit 58687acba59266735adb8ccd9b5b9aa2c7cd205b
>> Author: Don Zickus <dzickus@xxxxxxxxxx>
>> Date: Fri May 7 17:11:44 2010 -0400
>>
>> lockup_detector: Combine nmi_watchdog and softlockup detector
>>
>> The new nmi_watchdog (which uses the perf event subsystem) is very
>> similar in structure to the softlockup detector. Using Ingo's
>> suggestion, I combined the two functionalities into one file:
>> kernel/watchdog.c.
>>
>> Now both the nmi_watchdog (or hardlockup detector) and softlockup
>> detector sit on top of the perf event subsystem, which is run every
>> 60 seconds or so to see if there are any lockups.
>>
>> To detect hardlockups, cpus not responding to interrupts, I
>> implemented an hrtimer that runs 5 times for every perf event
>> overflow event. If that stops counting on a cpu, then the cpu is
>> most likely in trouble.
>>
>> To detect softlockups, tasks not yielding to the scheduler, I used the
>> previous kthread idea that now gets kicked every time the hrtimer fires.
>> If the kthread isn't being scheduled neither is anyone else and the
>> warning is printed to the console.
>>
>> I tested this on x86_64 and both the softlockup and hardlockup paths
>> work.
>>
>
> with
> # CONFIG_LOCKUP_DETECTOR is not set
> # CONFIG_HARDLOCKUP_DETECTOR is not set
>
> kexec loop test could passed.
>
> also that patch will break x2apic preenabled system 's kexec/kdump.

before the combining patch

CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_NMI_WATCHDOG=y

will have the same problem.

so the problem should come from NMI_WATCHDOG.

Yinghai


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/