[PATCH 2/3] trivial: fix typos concerning "address"

From: Uwe Kleine-KÃnig
Date: Mon Jul 12 2010 - 11:16:11 EST

Signed-off-by: Uwe Kleine-KÃnig <u.kleine-koenig@xxxxxxxxxxxxxx>
---
Documentation/networking/arcnet-hardware.txt | 2 +-
Documentation/powerpc/booting-without-of.txt | 2 +-
arch/arm/common/it8152.c | 2 +-
.../mach-bcmring/include/mach/csp/dmacHw_priv.h | 2 +-
.../arm/mach-bcmring/include/mach/csp/dmacHw_reg.h | 2 +-
arch/arm/mach-u300/include/mach/coh901318.h | 2 +-
.../mach-bf518/include/mach/defBF51x_base.h | 2 +-
.../mach-bf527/include/mach/defBF52x_base.h | 2 +-
arch/blackfin/mach-bf537/include/mach/defBF534.h | 2 +-
arch/blackfin/mach-bf538/include/mach/defBF539.h | 2 +-
arch/cris/arch-v32/lib/nand_init.S | 2 +-
arch/mips/pci/pcie-octeon.c | 2 +-
arch/mips/txx9/generic/pci.c | 2 +-
arch/sh/mm/cache-sh5.c | 2 +-
arch/sparc/kernel/traps_64.c | 2 +-
arch/x86/include/asm/pgalloc.h | 2 +-
drivers/edac/cell_edac.c | 4 ++--
drivers/gpu/drm/radeon/atombios.h | 2 +-
drivers/media/video/davinci/vpif.h | 2 +-
drivers/net/bnx2x_reg.h | 2 +-
drivers/net/bonding/bond_3ad.c | 4 ++--
drivers/net/chelsio/subr.c | 2 +-
drivers/net/cxgb3/t3_hw.c | 2 +-
drivers/net/e1000/e1000_main.c | 2 +-
drivers/net/e1000e/phy.c | 2 +-
drivers/net/eepro.c | 2 +-
drivers/net/ll_temac_main.c | 2 +-
drivers/net/skfp/h/supern_2.h | 2 +-
drivers/net/tehuti.c | 2 +-
drivers/net/tun.c | 2 +-
drivers/net/vxge/vxge-traffic.h | 2 +-
drivers/net/wimax/i2400m/driver.c | 2 +-
drivers/net/wireless/ath/ath5k/reg.h | 6 +++---
drivers/net/wireless/iwlwifi/iwl-sta.c | 2 +-
drivers/net/wireless/rt2x00/rt2x00mac.c | 2 +-
drivers/net/wireless/wl3501_cs.c | 2 +-
drivers/pci/iova.c | 2 +-
drivers/scsi/a100u2w.c | 2 +-
drivers/scsi/aic94xx/aic94xx_reg_def.h | 4 ++--
drivers/spi/atmel_spi.c | 4 ++--
drivers/usb/wusbcore/wa-rpipe.c | 2 +-
fs/ext4/ext4.h | 2 +-
include/acpi/actbl1.h | 2 +-
include/net/sctp/user.h | 4 ++--
kernel/kexec.c | 2 +-
kernel/sysctl_binary.c | 2 +-
kernel/trace/trace_entries.h | 2 +-
net/decnet/dn_dev.c | 2 +-
sound/pci/ca0106/ca0106.h | 2 +-
sound/pci/emu10k1/emu10k1x.c | 2 +-
sound/pci/emu10k1/p16v.h | 2 +-
sound/pci/es1968.c | 2 +-
sound/pci/rme9652/hdspm.c | 2 +-
53 files changed, 60 insertions(+), 60 deletions(-)

diff --git a/Documentation/networking/arcnet-hardware.txt b/Documentation/networking/arcnet-hardware.txt
index 731de41..0e67e9c 100644
--- a/Documentation/networking/arcnet-hardware.txt
+++ b/Documentation/networking/arcnet-hardware.txt
@@ -2884,7 +2884,7 @@ Jumpers 3-5 of jumper block SW1 select the Memory Base address.

*) To enable the Boot ROM set the jumper 8 of jumper block SW3 to position ON.

-The jumpers 1 and 2 probably add 0x0800, 0x1000 and 0x1800 to RAM adders.
+The jumpers 1 and 2 probably add 0x0800, 0x1000 and 0x1800 to RAM address.

Setting the Interrupt Line
--------------------------
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 46d2210..2dac110 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1125,7 +1125,7 @@ supported currently at the toplevel.
* an arbitrary array of bytes
*/

- childnode@addresss { /* define a child node named "childnode"
+ childnode@address { /* define a child node named "childnode"
* whose unit name is "childnode at
* address"
*/
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 7974baa..2ee1e1c 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -236,7 +236,7 @@ static struct resource it8152_mem = {

/*
* The following functions are needed for DMA bouncing.
- * ITE8152 chip can addrees up to 64MByte, so all the devices
+ * ITE8152 chip can address up to 64MByte, so all the devices
* connected to ITE8152 (PCI and USB) should have limited DMA window
*/

diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
index cbf334d..d67e2f8 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
@@ -28,7 +28,7 @@

/* Data type for DMA Link List Item */
typedef struct {
- uint32_t sar; /* Source Adress Register.
+ uint32_t sar; /* Source Address Register.
Address must be aligned to CTLx.SRC_TR_WIDTH. */
uint32_t dar; /* Destination Address Register.
Address must be aligned to CTLx.DST_TR_WIDTH. */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
index 891cea8..f1ecf96 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
@@ -35,7 +35,7 @@ typedef struct {

/* Data type representing DMA channel registers */
typedef struct {
- dmacHw_REG64_t ChannelSar; /* Source Adress Register. 64 bits (upper 32 bits are reserved)
+ dmacHw_REG64_t ChannelSar; /* Source Address Register. 64 bits (upper 32 bits are reserved)
Address must be aligned to CTLx.SRC_TR_WIDTH.
*/
dmacHw_REG64_t ChannelDar; /* Destination Address Register.64 bits (upper 32 bits are reserved)
diff --git a/arch/arm/mach-u300/include/mach/coh901318.h b/arch/arm/mach-u300/include/mach/coh901318.h
index 193da2d..2013d2b 100644
--- a/arch/arm/mach-u300/include/mach/coh901318.h
+++ b/arch/arm/mach-u300/include/mach/coh901318.h
@@ -24,7 +24,7 @@
* @src_addr: transfer source address
* @dst_addr: transfer destination address
* @link_addr: physical address to next lli
- * @virt_link_addr: virtual addres of next lli (only used by pool_free)
+ * @virt_link_addr: virtual address of next lli (only used by pool_free)
* @phy_this: physical address of current lli (only used by pool_free)
*/
struct coh901318_lli {
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
index 9241205..f889fa5 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
@@ -1324,7 +1324,7 @@
#define SADD_LEN 0x0002 /* Slave Address Length */
#define STDVAL 0x0004 /* Slave Transmit Data Valid */
#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
-#define GEN 0x0010 /* General Call Adrress Matching Enabled */
+#define GEN 0x0010 /* General Call Address Matching Enabled */

/* TWI_SLAVE_STAT Masks */
#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
index 8b18b53..25b4914 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
@@ -1333,7 +1333,7 @@
#define SADD_LEN 0x0002 /* Slave Address Length */
#define STDVAL 0x0004 /* Slave Transmit Data Valid */
#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
-#define GEN 0x0010 /* General Call Adrress Matching Enabled */
+#define GEN 0x0010 /* General Call Address Matching Enabled */

/* TWI_SLAVE_STAT Masks */
#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h
index cf396ea..b20edfc 100644
--- a/arch/blackfin/mach-bf537/include/mach/defBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h
@@ -1647,7 +1647,7 @@
#define SADD_LEN 0x0002 /* Slave Address Length */
#define STDVAL 0x0004 /* Slave Transmit Data Valid */
#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
-#define GEN 0x0010 /* General Call Adrress Matching Enabled */
+#define GEN 0x0010 /* General Call Address Matching Enabled */

/* TWI_SLAVE_STAT Masks */
#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
diff --git a/arch/blackfin/mach-bf538/include/mach/defBF539.h b/arch/blackfin/mach-bf538/include/mach/defBF539.h
index d7061d9..182c840 100644
--- a/arch/blackfin/mach-bf538/include/mach/defBF539.h
+++ b/arch/blackfin/mach-bf538/include/mach/defBF539.h
@@ -2363,7 +2363,7 @@
#define SADD_LEN 0x0002 /* Slave Address Length */
#define STDVAL 0x0004 /* Slave Transmit Data Valid */
#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
-#define GEN 0x0010 /* General Call Adrress Matching Enabled */
+#define GEN 0x0010 /* General Call Address Matching Enabled */

/* TWIx_SLAVE_STAT Masks */
#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
diff --git a/arch/cris/arch-v32/lib/nand_init.S b/arch/cris/arch-v32/lib/nand_init.S
index e705f5c..d671fed 100644
--- a/arch/cris/arch-v32/lib/nand_init.S
+++ b/arch/cris/arch-v32/lib/nand_init.S
@@ -139,7 +139,7 @@ copy_nand_to_ram:
lsrq 8, $r4
move.b $r4, [$r1] ; Row address
lsrq 8, $r4
- move.b $r4, [$r1] ; Row adddress
+ move.b $r4, [$r1] ; Row address
moveq 20, $r4
2: bne 2b
subq 1, $r4
diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c
index 6aa5c54..77a356e 100644
--- a/arch/mips/pci/pcie-octeon.c
+++ b/arch/mips/pci/pcie-octeon.c
@@ -891,7 +891,7 @@ static int cvmx_pcie_rc_initialize(int pcie_port)
mem_access_subid.s.ror = 0;
/* Disable Relaxed Ordering for Writes. */
mem_access_subid.s.row = 0;
- /* PCIe Adddress Bits <63:34>. */
+ /* PCIe Address Bits <63:34>. */
mem_access_subid.s.ba = 0;

/*
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
index 9a0be81..96e69a0 100644
--- a/arch/mips/txx9/generic/pci.c
+++ b/arch/mips/txx9/generic/pci.c
@@ -107,7 +107,7 @@ int txx9_pci_mem_high __initdata;

/*
* allocate pci_controller and resources.
- * mem_base, io_base: physical addresss. 0 for auto assignment.
+ * mem_base, io_base: physical address. 0 for auto assignment.
* mem_size and io_size means max size on auto assignment.
* pcic must be &txx9_primary_pcic or NULL.
*/
diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c
index eb4cc4e..d1bffbc 100644
--- a/arch/sh/mm/cache-sh5.c
+++ b/arch/sh/mm/cache-sh5.c
@@ -568,7 +568,7 @@ static void sh5_flush_dcache_page(void *page)
}

/*
- * Flush the range [start,end] of kernel virtual adddress space from
+ * Flush the range [start,end] of kernel virtual address space from
* the I-cache. The corresponding range must be purged from the
* D-cache also because the SH-5 doesn't have cache snooping between
* the caches. The addresses will be visible through the superpage
diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c
index 42ad2ba..1e97709 100644
--- a/arch/sparc/kernel/traps_64.c
+++ b/arch/sparc/kernel/traps_64.c
@@ -622,7 +622,7 @@ static const char CHAFSR_PERR_msg[] =
static const char CHAFSR_IERR_msg[] =
"Internal processor error";
static const char CHAFSR_ISAP_msg[] =
- "System request parity error on incoming addresss";
+ "System request parity error on incoming address";
static const char CHAFSR_UCU_msg[] =
"Uncorrectable E-cache ECC error for ifetch/data";
static const char CHAFSR_UCC_msg[] =
diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h
index 271de94..b4389a4 100644
--- a/arch/x86/include/asm/pgalloc.h
+++ b/arch/x86/include/asm/pgalloc.h
@@ -92,7 +92,7 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
extern void ___pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);

static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
- unsigned long adddress)
+ unsigned long address)
{
___pmd_free_tlb(tlb, pmd);
}
diff --git a/drivers/edac/cell_edac.c b/drivers/edac/cell_edac.c
index c973004..db1df59 100644
--- a/drivers/edac/cell_edac.c
+++ b/drivers/edac/cell_edac.c
@@ -47,7 +47,7 @@ static void cell_edac_count_ce(struct mem_ctl_info *mci, int chan, u64 ar)
offset = address & ~PAGE_MASK;
syndrome = (ar & 0x000000001fe00000ul) >> 21;

- /* TODO: Decoding of the error addresss */
+ /* TODO: Decoding of the error address */
edac_mc_handle_ce(mci, csrow->first_page + pfn, offset,
syndrome, 0, chan, "");
}
@@ -68,7 +68,7 @@ static void cell_edac_count_ue(struct mem_ctl_info *mci, int chan, u64 ar)
pfn = address >> PAGE_SHIFT;
offset = address & ~PAGE_MASK;

- /* TODO: Decoding of the error addresss */
+ /* TODO: Decoding of the error address */
edac_mc_handle_ue(mci, csrow->first_page + pfn, offset, 0, "");
}

diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 1bc72c3..21a54d0 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -1314,7 +1314,7 @@ typedef struct _GET_ENGINE_CLOCK_PARAMETERS
typedef struct _READ_EDID_FROM_HW_I2C_DATA_PARAMETERS
{
USHORT usPrescale; //Ratio between Engine clock and I2C clock
- USHORT usVRAMAddress; //Adress in Frame Buffer where to pace raw EDID
+ USHORT usVRAMAddress; //Address in Frame Buffer where to pace raw EDID
USHORT usStatus; //When use output: lower byte EDID checksum, high byte hardware status
//WHen use input: lower byte as 'byte to read':currently limited to 128byte or 1byte
UCHAR ucSlaveAddr; //Read from which slave
diff --git a/drivers/media/video/davinci/vpif.h b/drivers/media/video/davinci/vpif.h
index 188841b..ebd5c43 100644
--- a/drivers/media/video/davinci/vpif.h
+++ b/drivers/media/video/davinci/vpif.h
@@ -33,7 +33,7 @@ extern spinlock_t vpif_lock;
#define regr(reg) readl((reg) + vpif_base)
#define regw(value, reg) writel(value, (reg + vpif_base))

-/* Register Addresss Offsets */
+/* Register Address Offsets */
#define VPIF_PID (0x0000)
#define VPIF_CH0_CTRL (0x0004)
#define VPIF_CH1_CTRL (0x0008)
diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h
index a1f3bf0..d0db947 100644
--- a/drivers/net/bnx2x_reg.h
+++ b/drivers/net/bnx2x_reg.h
@@ -1442,7 +1442,7 @@
(~misc_registers_sw_timer_cfg_4.sw_timer_cfg_4[1] ) is set */
#define MISC_REG_SW_TIMER_RELOAD_VAL_4 0xa2fc
/* [RW 32] the value of the counter for sw timers1-8. there are 8 addresses
- in this register. addres 0 - timer 1; address 1 - timer 2, ... address 7 -
+ in this register. address 0 - timer 1; address 1 - timer 2, ... address 7 -
timer 8 */
#define MISC_REG_SW_TIMER_VAL 0xa5c0
/* [RW 1] Set by the MCP to remember if one or more of the drivers is/are
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index 822f586..03145a7 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -848,7 +848,7 @@ static int ad_lacpdu_send(struct port *port)
lacpdu_header = (struct lacpdu_header *)skb_put(skb, length);

memcpy(lacpdu_header->hdr.h_dest, lacpdu_mcast_addr, ETH_ALEN);
- /* Note: source addres is set to be the member's PERMANENT address,
+ /* Note: source address is set to be the member's PERMANENT address,
because we use it to identify loopback lacpdus in receive. */
memcpy(lacpdu_header->hdr.h_source, slave->perm_hwaddr, ETH_ALEN);
lacpdu_header->hdr.h_proto = PKT_TYPE_LACPDU;
@@ -890,7 +890,7 @@ static int ad_marker_send(struct port *port, struct bond_marker *marker)
marker_header = (struct bond_marker_header *)skb_put(skb, length);

memcpy(marker_header->hdr.h_dest, lacpdu_mcast_addr, ETH_ALEN);
- /* Note: source addres is set to be the member's PERMANENT address,
+ /* Note: source address is set to be the member's PERMANENT address,
because we use it to identify loopback MARKERs in receive. */
memcpy(marker_header->hdr.h_source, slave->perm_hwaddr, ETH_ALEN);
marker_header->hdr.h_proto = PKT_TYPE_LACPDU;
diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c
index 53bde15..ed06fea 100644
--- a/drivers/net/chelsio/subr.c
+++ b/drivers/net/chelsio/subr.c
@@ -561,7 +561,7 @@ struct chelsio_vpd_t {
#define EEPROM_MAX_POLL 4

/*
- * Read SEEPROM. A zero is written to the flag register when the addres is
+ * Read SEEPROM. A zero is written to the flag register when the address is
* written to the Control register. The hardware device will set the flag to a
* one when 4B have been transferred to the Data register.
*/
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index 95a8ba0..a591fed 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -605,7 +605,7 @@ struct t3_vpd {
*
* Read a 32-bit word from a location in VPD EEPROM using the card's PCI
* VPD ROM capability. A zero is written to the flag bit when the
- * addres is written to the control register. The hardware device will
+ * address is written to the control register. The hardware device will
* set the flag to 1 when 4 bytes have been read into the data register.
*/
int t3_seeprom_read(struct adapter *adapter, u32 addr, __le32 *data)
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index ebdea08..fd8eaab 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -2150,7 +2150,7 @@ static void e1000_set_rx_mode(struct net_device *netdev)
* addresses take precedence to avoid disabling unicast filtering
* when possible.
*
- * RAR 0 is used for the station MAC adddress
+ * RAR 0 is used for the station MAC address
* if there are not 14 addresses, go ahead and clear the filters
*/
i = 1;
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index b4ac82d..7bcb356 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -2973,7 +2973,7 @@ s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data)
}

/**
- * e1000_get_phy_addr_for_hv_page - Get PHY adrress based on page
+ * e1000_get_phy_addr_for_hv_page - Get PHY address based on page
* @page: page to be accessed
**/
static u32 e1000_get_phy_addr_for_hv_page(u32 page)
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index 8d97f16..9be9df6 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -1760,7 +1760,7 @@ module_param_array(io, int, NULL, 0);
module_param_array(irq, int, NULL, 0);
module_param_array(mem, int, NULL, 0);
module_param(autodetect, int, 0);
-MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base addres(es)");
+MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base address(es)");
MODULE_PARM_DESC(irq, "EtherExpress Pro/10 IRQ number(s)");
MODULE_PARM_DESC(mem, "EtherExpress Pro/10 Rx buffer size(es) in kB (3-29)");
MODULE_PARM_DESC(autodetect, "EtherExpress Pro/10 force board(s) detection (0-1)");
diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c
index 315eb4c..04160c9 100644
--- a/drivers/net/ll_temac_main.c
+++ b/drivers/net/ll_temac_main.c
@@ -203,7 +203,7 @@ static int temac_dma_bd_init(struct net_device *ndev)

lp->rx_skb = kzalloc(sizeof(*lp->rx_skb) * RX_BD_NUM, GFP_KERNEL);
/* allocate the tx and rx ring buffer descriptors. */
- /* returns a virtual addres and a physical address. */
+ /* returns a virtual address and a physical address. */
lp->tx_bd_v = dma_alloc_coherent(ndev->dev.parent,
sizeof(*lp->tx_bd_v) * TX_BD_NUM,
&lp->tx_bd_p, GFP_KERNEL);
diff --git a/drivers/net/skfp/h/supern_2.h b/drivers/net/skfp/h/supern_2.h
index 5ba0b83..5607fb3 100644
--- a/drivers/net/skfp/h/supern_2.h
+++ b/drivers/net/skfp/h/supern_2.h
@@ -345,7 +345,7 @@ struct tx_queue {
#define FM_LTDPA1 0x79 /* r/w Last Trans desc ptr for A1 qu. */
/* 0x80-0x9a PLCS registers of built-in PLCS (Supernet 3 only) */

-/* Supernet 3: Adderss Filter Registers */
+/* Supernet 3: Address Filter Registers */
#define FM_AFCMD 0xb0 /* r/w Address Filter Command Reg */
#define FM_AFSTAT 0xb2 /* r/w Address Filter Status Reg */
#define FM_AFBIST 0xb4 /* r/w Address Filter BIST signature */
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 737df60..90e5048 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -821,7 +821,7 @@ static void bdx_setmulti(struct net_device *ndev)
}

/* use PMF to accept first MAC_MCST_NUM (15) addresses */
- /* TBD: sort addreses and write them in ascending order
+ /* TBD: sort addresses and write them in ascending order
* into RX_MAC_MCST regs. we skip this phase now and accept ALL
* multicast frames throu IMF */
/* accept the rest of addresses throu IMF */
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 6ad6fe7..6d3413d 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -1297,7 +1297,7 @@ static long __tun_chr_ioctl(struct file *file, unsigned int cmd,
break;

case SIOCGIFHWADDR:
- /* Get hw addres */
+ /* Get hw address */
memcpy(ifr.ifr_hwaddr.sa_data, tun->dev->dev_addr, ETH_ALEN);
ifr.ifr_hwaddr.sa_family = tun->dev->type;
if (copy_to_user(argp, &ifr, ifreq_len))
diff --git a/drivers/net/vxge/vxge-traffic.h b/drivers/net/vxge/vxge-traffic.h
index c252f3d..f115a4d 100644
--- a/drivers/net/vxge/vxge-traffic.h
+++ b/drivers/net/vxge/vxge-traffic.h
@@ -1695,7 +1695,7 @@ struct vxge_hw_device_stats_sw_err {
* struct vxge_hw_device_stats - Contains HW per-device statistics,
* including hw.
* @devh: HW device handle.
- * @dma_addr: DMA addres of the %hw_info. Given to device to fill-in the stats.
+ * @dma_addr: DMA address of the %hw_info. Given to device to fill-in the stats.
* @hw_info_dmah: DMA handle used to map hw statistics onto the device memory
* space.
* @hw_info_dma_acch: One more DMA handle used subsequently to free the
diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c
index 9c8b78d..27c3200 100644
--- a/drivers/net/wimax/i2400m/driver.c
+++ b/drivers/net/wimax/i2400m/driver.c
@@ -280,7 +280,7 @@ int i2400m_check_mac_addr(struct i2400m *i2400m)
result);
goto error;
}
- /* Extract MAC addresss */
+ /* Extract MAC address */
ddi = (void *) skb->data;
BUILD_BUG_ON(ETH_ALEN != sizeof(ddi->mac_address));
d_printf(2, dev, "GET DEVICE INFO: mac addr %pM\n",
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index 55b4ac6..5246e56 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -1064,7 +1064,7 @@
/*
* EEPROM command register
*/
-#define AR5K_EEPROM_CMD 0x6008 /* Register Addres */
+#define AR5K_EEPROM_CMD 0x6008 /* Register Address */
#define AR5K_EEPROM_CMD_READ 0x00000001 /* EEPROM read */
#define AR5K_EEPROM_CMD_WRITE 0x00000002 /* EEPROM write */
#define AR5K_EEPROM_CMD_RESET 0x00000004 /* EEPROM reset */
@@ -1084,7 +1084,7 @@
/*
* EEPROM config register
*/
-#define AR5K_EEPROM_CFG 0x6010 /* Register Addres */
+#define AR5K_EEPROM_CFG 0x6010 /* Register Address */
#define AR5K_EEPROM_CFG_SIZE 0x00000003 /* Size determination override */
#define AR5K_EEPROM_CFG_SIZE_AUTO 0
#define AR5K_EEPROM_CFG_SIZE_4KBIT 1
@@ -1126,7 +1126,7 @@
* Second station id register (Upper 16 bits of MAC address + PCU settings)
*/
#define AR5K_STA_ID1 0x8004 /* Register Address */
-#define AR5K_STA_ID1_ADDR_U16 0x0000ffff /* Upper 16 bits of MAC addres */
+#define AR5K_STA_ID1_ADDR_U16 0x0000ffff /* Upper 16 bits of MAC address */
#define AR5K_STA_ID1_AP 0x00010000 /* Set AP mode */
#define AR5K_STA_ID1_ADHOC 0x00020000 /* Set Ad-Hoc mode */
#define AR5K_STA_ID1_PWR_SV 0x00040000 /* Power save reporting */
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 83a2636..3774230 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -104,7 +104,7 @@ static void iwl_process_add_sta_resp(struct iwl_priv *priv,
/*
* XXX: The MAC address in the command buffer is often changed from
* the original sent to the device. That is, the MAC address
- * written to the command buffer often is not the same MAC adress
+ * written to the command buffer often is not the same MAC address
* read from the command buffer when the command returns. This
* issue has not yet been resolved and this debugging is left to
* observe the problem.
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index abbd857..c848fc0 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -278,7 +278,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
memcpy(&intf->mac, vif->addr, ETH_ALEN);

/*
- * The MAC adddress must be configured after the device
+ * The MAC address must be configured after the device
* has been initialized. Otherwise the device can reset
* the MAC registers.
*/
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 376c6b9..a3e909d 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -209,7 +209,7 @@ static inline void wl3501_switch_page(struct wl3501_card *this, u8 page)
}

/*
- * Get Ethernet MAC addresss.
+ * Get Ethernet MAC address.
*
* WARNING: We switch to FPAGE0 and switc back again.
* Making sure there is no other WL function beening called by ISR.
diff --git a/drivers/pci/iova.c b/drivers/pci/iova.c
index 7914951..693ea16 100644
--- a/drivers/pci/iova.c
+++ b/drivers/pci/iova.c
@@ -364,7 +364,7 @@ __adjust_overlap_range(struct iova *iova,
* reserve_iova - reserves an iova in the given range
* @iovad: - iova domain pointer
* @pfn_lo: - lower page frame address
- * @pfn_hi:- higher pfn adderss
+ * @pfn_hi:- higher pfn address
* This function allocates reserves the address range from pfn_lo to pfn_hi so
* that this address is not dished out as part of alloc_iova.
*/
diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c
index dbbc601..61a6182 100644
--- a/drivers/scsi/a100u2w.c
+++ b/drivers/scsi/a100u2w.c
@@ -416,7 +416,7 @@ static u8 orc_load_firmware(struct orc_host * host)
/* Go back and check they match */

outb(PRGMRST | DOWNLOAD, host->base + ORC_RISCCTL); /* Reset program count 0 */
- bios_addr -= 0x1000; /* Reset the BIOS adddress */
+ bios_addr -= 0x1000; /* Reset the BIOS address */
for (i = 0, data32_ptr = (u8 *) & data32; /* Check the code */
i < 0x1000; /* Firmware code size = 4K */
i++, bios_addr++) {
diff --git a/drivers/scsi/aic94xx/aic94xx_reg_def.h b/drivers/scsi/aic94xx/aic94xx_reg_def.h
index 28aaf34..40273a7 100644
--- a/drivers/scsi/aic94xx/aic94xx_reg_def.h
+++ b/drivers/scsi/aic94xx/aic94xx_reg_def.h
@@ -1689,7 +1689,7 @@
#define PHY_START_CAL 0x01

/*
- * HST_PCIX2 Registers, Addresss Range: (0x00-0xFC)
+ * HST_PCIX2 Registers, Address Range: (0x00-0xFC)
*/
#define PCIX_REG_BASE_ADR 0xB8040000

@@ -1802,7 +1802,7 @@
#define PCIC_TP_CTRL 0xFC

/*
- * EXSI Registers, Addresss Range: (0x00-0xFC)
+ * EXSI Registers, Address Range: (0x00-0xFC)
*/
#define EXSI_REG_BASE_ADR REG_BASE_ADDR_EXSI

diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index c4e0442..09ee7dd 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -341,9 +341,9 @@ static void atmel_spi_next_message(struct spi_master *master)
/*
* For DMA, tx_buf/tx_dma have the same relationship as rx_buf/rx_dma:
* - The buffer is either valid for CPU access, else NULL
- * - If the buffer is valid, so is its DMA addresss
+ * - If the buffer is valid, so is its DMA address
*
- * This driver manages the dma addresss unless message->is_dma_mapped.
+ * This driver manages the dma address unless message->is_dma_mapped.
*/
static int
atmel_spi_dma_map_xfer(struct atmel_spi *as, struct spi_transfer *xfer)
diff --git a/drivers/usb/wusbcore/wa-rpipe.c b/drivers/usb/wusbcore/wa-rpipe.c
index c7b1d81..fad0daf 100644
--- a/drivers/usb/wusbcore/wa-rpipe.c
+++ b/drivers/usb/wusbcore/wa-rpipe.c
@@ -49,7 +49,7 @@
*
* USB Stack port number 4 (1 based)
* WUSB code port index 3 (0 based)
- * USB Addresss 5 (2 based -- 0 is for default, 1 for root hub)
+ * USB Address 5 (2 based -- 0 is for default, 1 for root hub)
*
* Now, because we don't use the concept as default address exactly
* like the (wired) USB code does, we need to kind of skip it. So we
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 19a4de5..07952d3 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -548,7 +548,7 @@ struct ext4_mount_options {
#endif
};

-/* Max physical block we can addres w/o extents */
+/* Max physical block we can address w/o extents */
#define EXT4_MAX_BLOCK_FILE_PHYS 0xFFFFFFFF

/*
diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h
index c637b75..cd77aa7 100644
--- a/include/acpi/actbl1.h
+++ b/include/acpi/actbl1.h
@@ -119,7 +119,7 @@ struct acpi_whea_header {
struct acpi_table_bert {
struct acpi_table_header header; /* Common ACPI table header */
u32 region_length; /* Length of the boot error region */
- u64 address; /* Physical addresss of the error region */
+ u64 address; /* Physical address of the error region */
};

/* Boot Error Region (not a subtable, pointed to by Address field above) */
diff --git a/include/net/sctp/user.h b/include/net/sctp/user.h
index 2b2769c..2a128c8 100644
--- a/include/net/sctp/user.h
+++ b/include/net/sctp/user.h
@@ -99,8 +99,8 @@ typedef __s32 sctp_assoc_t;
#define SCTP_SOCKOPT_PEELOFF 102 /* peel off association. */
/* Options 104-106 are deprecated and removed. Do not use this space */
#define SCTP_SOCKOPT_CONNECTX_OLD 107 /* CONNECTX old requests. */
-#define SCTP_GET_PEER_ADDRS 108 /* Get all peer addresss. */
-#define SCTP_GET_LOCAL_ADDRS 109 /* Get all local addresss. */
+#define SCTP_GET_PEER_ADDRS 108 /* Get all peer address. */
+#define SCTP_GET_LOCAL_ADDRS 109 /* Get all local address. */
#define SCTP_SOCKOPT_CONNECTX 110 /* CONNECTX requests. */
#define SCTP_SOCKOPT_CONNECTX3 111 /* CONNECTX requests (updated) */

diff --git a/kernel/kexec.c b/kernel/kexec.c
index 474a847..a68068c 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -161,7 +161,7 @@ static int do_kimage_alloc(struct kimage **rimage, unsigned long entry,
* just verifies it is an address we can use.
*
* Since the kernel does everything in page size chunks ensure
- * the destination addreses are page aligned. Too many
+ * the destination addresses are page aligned. Too many
* special cases crop of when we don't do this. The most
* insidious is getting overlapping destination addresses
* simply because addresses are changed to page size
diff --git a/kernel/sysctl_binary.c b/kernel/sysctl_binary.c
index 1357c57..d9c5fe4 100644
--- a/kernel/sysctl_binary.c
+++ b/kernel/sysctl_binary.c
@@ -1193,7 +1193,7 @@ static ssize_t bin_dn_node_address(struct file *file,

buf[result] = '\0';

- /* Convert the decnet addresss to binary */
+ /* Convert the decnet address to binary */
result = -EIO;
nodep = strchr(buf, '.') + 1;
if (!nodep)
diff --git a/kernel/trace/trace_entries.h b/kernel/trace/trace_entries.h
index dc008c1..c9b8e8a 100644
--- a/kernel/trace/trace_entries.h
+++ b/kernel/trace/trace_entries.h
@@ -53,7 +53,7 @@
*/

/*
- * Function trace entry - function address and parent function addres:
+ * Function trace entry - function address and parent function address:
*/
FTRACE_ENTRY(function, ftrace_entry,

diff --git a/net/decnet/dn_dev.c b/net/decnet/dn_dev.c
index 4c409b4..9b73e0b 100644
--- a/net/decnet/dn_dev.c
+++ b/net/decnet/dn_dev.c
@@ -1112,7 +1112,7 @@ static struct dn_dev *dn_dev_create(struct net_device *dev, int *err)
/*
* This processes a device up event. We only start up
* the loopback device & ethernet devices with correct
- * MAC addreses automatically. Others must be started
+ * MAC addresses automatically. Others must be started
* specifically.
*
* FIXME: How should we configure the loopback address ? If we could dispense
diff --git a/sound/pci/ca0106/ca0106.h b/sound/pci/ca0106/ca0106.h
index 14b8d9a..afee506 100644
--- a/sound/pci/ca0106/ca0106.h
+++ b/sound/pci/ca0106/ca0106.h
@@ -188,7 +188,7 @@
#define PLAYBACK_LIST_PTR 0x02 /* Pointer to the current period being played */
/* PTR[5:0], Default: 0x0 */
#define PLAYBACK_UNKNOWN3 0x03 /* Not used ?? */
-#define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA addresss */
+#define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA address */
/* DMA[31:0], Default: 0x0 */
#define PLAYBACK_PERIOD_SIZE 0x05 /* Playback period size. win2000 uses 0x04000000 */
/* SIZE[31:16], Default: 0x0 */
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index df47f73..0c701e4 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -114,7 +114,7 @@ MODULE_PARM_DESC(enable, "Enable the EMU10K1X soundcard.");
*/
#define PLAYBACK_LIST_SIZE 0x01 /* Size of list in bytes << 16. E.g. 8 periods -> 0x00380000 */
#define PLAYBACK_LIST_PTR 0x02 /* Pointer to the current period being played */
-#define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA addresss */
+#define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA address */
#define PLAYBACK_PERIOD_SIZE 0x05 /* Playback period size */
#define PLAYBACK_POINTER 0x06 /* Playback period pointer. Sample currently in DAC */
#define PLAYBACK_UNKNOWN1 0x07
diff --git a/sound/pci/emu10k1/p16v.h b/sound/pci/emu10k1/p16v.h
index 1532149..00f4817 100644
--- a/sound/pci/emu10k1/p16v.h
+++ b/sound/pci/emu10k1/p16v.h
@@ -96,7 +96,7 @@
#define PLAYBACK_LIST_SIZE 0x01 /* Size of list in bytes << 16. E.g. 8 periods -> 0x00380000 */
#define PLAYBACK_LIST_PTR 0x02 /* Pointer to the current period being played */
#define PLAYBACK_UNKNOWN3 0x03 /* Not used */
-#define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA addresss */
+#define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA address */
#define PLAYBACK_PERIOD_SIZE 0x05 /* Playback period size. win2000 uses 0x04000000 */
#define PLAYBACK_POINTER 0x06 /* Playback period pointer. Used with PLAYBACK_LIST_PTR to determine buffer position currently in DAC */
#define PLAYBACK_FIFO_END_ADDRESS 0x07 /* Playback FIFO end address */
diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c
index 23a58f0..7c17f45 100644
--- a/sound/pci/es1968.c
+++ b/sound/pci/es1968.c
@@ -220,7 +220,7 @@ MODULE_PARM_DESC(joystick, "Enable joystick.");
#define RINGB_EN_2CODEC 0x0020
#define RINGB_SING_BIT_DUAL 0x0040

-/* ****Port Adresses**** */
+/* ****Port Addresses**** */

/* Write & Read */
#define ESM_INDEX 0x02
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index 547b713..541f3c0 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -550,7 +550,7 @@ static inline int HDSPM_bit2freq(int n)
return bit2freq_tab[n];
}

-/* Write/read to/from HDSPM with Adresses in Bytes
+/* Write/read to/from HDSPM with Addresses in Bytes
not words but only 32Bit writes are allowed */

static inline void hdspm_write(struct hdspm * hdspm, unsigned int reg,
--
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/